RRI using Tcode in source system giving error

Hi,
I am trying to run a report in BW in tcode RSRT using RRI mechanism and the same is throwing an exception - An error occurred with the report to report interface during the jump. The same when run in BExAnalyzer throws an error "A critical error occured".
The selections I have applied are as under:
Target system -> Source System(ECC)
Report Type -> Transaction
Report Destination -> ME2L
Assignments as under:
0DOC_NUM -> EBELN
Any trace to the cause of the error would be helpful.
Thanks,
Amogh

Try creating a program in source whihc calls t-code ME2L and then from RRI try to call the program., and also check if you have authorization to t-code RSRR_WEB &RSBBS_WEB in you source system,
If this did not help give us more detial on the error you are faceing.
Shashi

Similar Messages

  • Source system connection error

    Dear BW Experts,
    Now, i am in a critical situation,that the source system giving error in the quality system.So unable to extract data for testing.we have tried a lot getting any solution.
    But now planning to connect the sand box system to the bw quality system.
    The confusion is that if the sand box is connected to the bw quality system,then can i use all the developed objects(infocubes,ds objects,multi providers etc) which i had created before or design and activate all the objects again for the new source system.
    If any body attended this type of issues earlier,please suggest me how to proceed....
    Thanks & Regardas
    Debasish

    Hi,
    u can connect ur bw quality system to ur sand box.
    but u have to reimport all requests from Bw development to bw qualty.
    Imp. u have to delete Source conversion routine before importing request.
    Steps will be same like
    1. replicate data source.....
    2.....
    etc..
    /Sachinkumar.

  • Error deleting source system with error message: "incorrect input for....."

    Hi,
    I'm trying to delete the source system using tcode RSA1 => Source systems => select the 'source system' and delete, but I got an error message as follows:
    "incorrect input for activating transported shadow IPacks"
    Fyi, I have opened up the client configuration (SCC4) prior to delete this source system but the source system still cannot be deleted and I receive the above error message.
    Please let me know what is the caused of the error and how to solve the problem.
    Thanks for your kind help.
    Regards,
    Mark

    Hi Mark,
    Which version of BW are you in?
    check this thread and also the note 709581
    Error Deleting Source system connection
    Thanks,
    Raj

  • Error in codepage mapping for source system. Error

    Hi BW Experts,
    I am facing following error:
    Error message: Error in codepage mapping for source system. Error text:
    Details: Inbound Processing ( 1000  Records ) : Errors occurred
                Error in codepage mapping for source system. Error text:
                Update PSA ( 0 Records posted ) : Missing messages
    I repeated the delta working and everything fine.
    Does anybody know why this error occurs?

    Run rsa13 (for bi 7.0) find your source system which one you are using for data transfer and double  click on it and find special options there select  the optioned i mentioned already.
    Please search SDN you can fin threads related to this thread
    if not let me know.
    Regards.

  • Error in codepage mapping for source system. Error text:

    guyz,
    im facing the below issue in prod.
    Error in codepage mapping for source system. Error text:
    Message no. RSDS_ACCESS013
    Collection in source system ended
    Error message during processing in BI
    Diagnosis
    An error occurred in BI while processing the data. The error is documented in an error message.
    System Response
    A caller 01, 02 or equal to or greater than 20 contains an error meesage.
    Further analysis:
    The error message(s) was (were) sent by:
    Inbound Processing
    Procedure
    Check the error message (pushbutton below the text).
    Select the message in the message dialog box, and look at the long text for further information.
    Follow the instructions in the message.
    need your guidance,
    cheerz,
    raps.
    Edited by: raps on Mar 1, 2012 9:39 AM

    Hi ,
    Kindly go throught the following threads for your issue resolution::
    Error in code page mapping for Source System
    Erroe in source system
    Regards,
    Arpit

  • Source system initialization error in ERPI using EBS,

    Hi,
    I am trying to initialize source system details in ERP Integrator(workspacce) using EBS detials,for loading to Planning.
    Add source system is success,then click on Initialize button I got this error:
    Error encountered while launching the ODI Process :Agent didn't prepare this command:Error during Session Preparation:No suitable driver
    can you please tell me ,why i am getting this error.
    Regards,
    SV

    Hi There,
    I am trying to extract metadata out of EBS and target is Essbase. Everything is setup and connection working fine.
    My problem is that the chart of accounts is getting built in Essbase as a flat structure? How do I get the roll ups from EBS into Essbase? Is there a certain seeting that I must choose to be able to build the Parent Child relationships?
    Thanks for the help
    Regards
    Henk

  • When using the OData Source I receive error "The remote server returned an error: (403) Forbidden. (System)"

    I get this error once I click the "Test Connection" button in the OData Connection manager. I am working against an O365 SharePoint List. I will add that I have this working just fine when running it from my Windows 8 workstation using Visual Studio
    2013.
    On my Windows 2012 R2 Server, using Visual Studio 2013 is wen I encounter the error so I know I have the connection settings correct.  I am going against the same SP list using the same credentials.  The only difference is when running on Server
    2012 vs. Winodws 8 workstation.  I don't know if there are some other security settings that need to be applied.
    I will also add that I can access on premise list successfully,  I am only having this issue with O365 List.
    Any help would be appreciated.  Thanks.
    Jim

    It might be due to the “Microsoft Online Services Authentication” NOT set to true.
    See
    http://whitepages.unlimitedviz.com/2014/03/using-the-odata-source-connector-with-sharepoint-online-authentication/
    Arthur
    MyBlog
    Twitter

  • Source System RFC Error in BI

    Hello SAP Experts,
    I have installed BI 7.0. And i have created an RFC connection for BI to R3. It was working fine but now the SAP R/3 source system in RSA1 is giving an error "Result of the destination check:Name or password in incorrect(repeat logon)". And also when i am logging in, moving between screens or T-codes, it is taking a long time and the status in the bottom of the screens shows that it is checking all the destinations that is the RFC connection created. Not able to trace the reason behind this. Please help. BL consultants are waiting to work.
    Thanks a lot
    Regards
    Vani

    Hello MLN,
    This is not the first time i am configuring SS. I have done it long back. I created a user manually long back and i used that user while configuring the SS. All these months it worked fine and no issues. As far as i know,ALEREMOTE and BWREMOTE are service users which we get by default after installation. And during configuration, i remember, i gave the passwords for both the users. But my question is, all these days it went fine and now it is giving an error. And why is it checking all the destinations when i execute any transaction. Please clarify. BI consultants practiced SPRO, so is there any chance that they might have changed or ececuted something and the result is this error? If so what can that be. Please suggest
    Thanks a lot
    Regards
    Vanitha

  • When we are able to see the data in Tcode RSA3(Source system)

    Hi,
    Please help me!
    In enhancement after doing the R/3 stuff, when we are able to see the data in Tcode RSA3 in R/3 only?
    Give the detail for all types of data source and for all types of loads.
    eg: Std data source for deltaload, Generic data source for full load.....etc...
    Regards,
    Shiva.

    Sure...
    I am doing enhancement for datasource '2LIS_05_QVUDN'.
    I complited the R/3 stuff and check the data for enhanced fields in RSA3...it's giving run timeout run time error.
    Then I just ignore that error and I complited BW stuff successfully....after compliting BW stuff I am able to see the data in RSA3 in R/3.
    So my question is, What is the root cause for this....?
    When we are able to see the data in RSA3 in source system.?
    please give me details for all types of datasource and all types of loads so that it will helps a lot for me in future.

  • 75% of overhead to be loaded on WIP. System giving error: Msg No. KJ333

    Hello Experts,
    We are executing WIP (TCode: KKAX). We have load only 75% of the overhead. Hence for this, we have maintained 3 things ReqToCap - OVH,
    OptToCap - OVH and % OvhToCap as 75%.
    However, system is giving error. Refer Screenshot KKAX Error - 1. Refer my setting Screenshot - KKAX Config1
    Since it was multiple assignment error, I tried removing "ReqToCap" It gave me other error. Refer Screenshot KKAX Config2
    Please help me, how to achieve this requirement.
    Deepak

    Dear Deepak
    Your OKGB screen should look like this:
    Kindly update, after changes did it wok or not.
    Regards
    Rajneesh Saxena

  • R/3 source system creation error(Idoc is missing)

    Hi expert's.
    i have created an r/3 source system in BI 7. but it's showing error when i am activating it.
    error as follows.
    1. Basic type ZSMA087 does not exist     EA     447     
    2. Incorrect IDoc type ZSDF085 in the ALE definition of the source system     RSAR     373     
    for the above error 1 i checked in the RSBASIDOC table. it showing the idoc type. when i am checked with the source system that is r/3 system in the partner profile for logical system. it's showing the incorrect idoc type in RSSEND outbound parameters for that logical system
    when i am changed that idoc type it's showing error as follows.
    "entry RSSEND zsma087 does not exit in edimsg.
    after that i checked with this table edimsg. for the rssend outbound option it's won't have the idoc type zsma087. table edit is also not possible on that.
    so please help me to solve the issue.
    regards
    Harikrishna N

    Hi Hari,
                    Are you using ECC6.0 system or Bw(bi7.0) & R/3 source system
    Regards,
    Vijay.

  • Source system activate error

    Hi,
    I have created new source system for R/3 quality , when i am activating then getting following error. Kindly suggest how to resolve this error. Thanks in advance.
    BI unknown in source system     RSAR     8     
    BI IDoc type ZSDB018 is not the same as source system IDoc type     RSAR     371     
    EDI: Partner profile not available
    Entry in inbound table not found
    Entry in outbound table not found
    Rgrds
    Rakesh

    Hi,
    Check the source system RFC connection in SM59, if this is ok then check the tcode  WE20 for EDI partner profiles and inbound and out bound Idocs defined.
    In BW Out boud IDOC type should be same in ECC in bound Idoc type, and in ECC out Bound IDOC type should be same in BW in bound IDOC type then the source system activation is possible in RSA1.

  • Use of "Archive Source Files with Errors" for BIC module error

    Hi All,
    I have Edi file to Idoc scenario , where i am using SEEBURGER BICXIADAPTER.MODULE.
    My question is if the input file caught in error with BIC Module e.g
    "MP: exception caught with cause Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: SegmentDescription: checkAndResetChildrenCounter() not enough repetitions of the segment UNH found: 0 instead of 1 offset :80 DESCRIPTION: SegmentDescription Warning: Not enough repetitions of the segment UNH ([not specified]/[not specified])."
    can we move these errornous files to another directory using Processing parameter  "Archive Source Files with Errors" available with Sender File Adapter?
    In File Adpater my Module tab looks like :
    1     localejbs/CallBicXIRaBean     Local Enterprise Bean     bic
    2     localejbs/CallSapAdapter     Local Enterprise Bean     0
    In my scenario  , its not working..  do we have any other option to achive this?

    Hi Jyoti,
    I had a raised a similar case with SAP and came to know that archiving only works if the error raised by the module is so called "Permanent". However, bic doesn't raise permanent error due to which archiving of error files won't be possible. Seeburger haven't came up with a solution yet.
    Regards,
    Prateek

  • 2LIS_02_HDR : Source System ID error

    Trying to upload from this datasource in 3.5 environment. I keep getting error while extracting, erroneous data in PSA.
    Source System ID not found, how do I fix this?
    Thanks in advance
    Fran

    Fran
    Go To RSA1>Tools>choose assignment of source system to source system ID-->assign ID. assign your source system ID to source system and save it
    You could find source system ID in your source system tab
    Hope this helps
    Thnaks
    Sat

  • Source System creation error

    Hi..
    I cannot create R/3(productive) source system at BW (development)
    I checked password, cross-client and client specific are all changeble (t-code SCC4) and namespaces, sofeware are also modifiagle (t-code SE06) at R/3.
    At BW, RFC connection is Ok (SM59) and R3 side, RFC also connected w/o problem.
    But the error is still not resolved.
    What I have to do now..

    Hi Ravi..
    Error massage is...
    Massage No. RSAR502
    Diagnosis
    With Remote Function Call to system  error Screen output without connection to user.  ccurred.
    and runtime error massage is (ST22)
    DYNPRO_SEND_IN_BACKGROUND
    Rita

Maybe you are looking for

  • 10.1.3 Pro: How to get the selectedItem in a selectOneChoice?

    I have a selectOneChoice component on the JSP. It has a list of IDs from 1 to 100 and 19 is skipped (... 17, 18, 20, 21...). I tried the following code to get the real value of the selectedId. FacesContext fc = FacesContext.getCurrentInstance(); Valu

  • How to create complaints with reference to ECC Billing document (CRM 7.0)

    Hi experts! I use ECC 6.0 and CRM 7.0. I have to create CRM complaints (ZCLR - CLRP) with reference to ecc billing documents. I read the following topics and help: 1. How to create complaints with referenceto ECC Billing document 2. Re: How can we tr

  • Sub-menu of eSubmit is empty in non-English language (Russian)

    BPC 7.5 BPC for Excel in English is working correctly, but in Russian sub-menu of eSubmit is empty

  • XSL Transformation error source

    I am using MII 12.0 and I am getting the following error in the log file: javax.xml.transform.TransformerException: javax.xml.transform.TransformerException: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException: An attempt to write a

  • Sandbox system in NWDI landscape

    We are implementing a three tier NWDI landscape.  There is also some development in the sandbox as well.  Would it be a good idea to create a seperate NWDI for the sandbox environment so that none of the changes are included in the NWDI landscape of