RRMX PROBLEM WITH BEX

Hi Guys.,
          I have jsut installed SAP Business Explorer in SAP BW Dev server, but i can only be able to login into BEX by going directly START->Programs->Business Explorer. But i can't be able to login into BW BEX through 'RRMX' Transaction.
       It is showing the error message like:
             A critical program error occurred.
             The program has to close.
             Please refer to the trace for further information.
            Can anybody tell me the solution how to solve this problem?
Regards.,
Balaji K. Reddy

Hi Balaji,
You have said you have installed BW server. I think you need to update ur SAP GUI (Frontend) to include and install BW related components while installing ur SAP GUI. Pleas check this. Also you need to check Microsoft Excel is installed in your workstation. I think this should resolve your problem
Thanks
Kishore Kumar

Similar Messages

IP - Various problems with BEX Analyser - help would be nice

Hi,
we use IP in combination with BEX analyser. We experience certain problems. Does anyone experienced the same issues mentioned below:
1) if a planning function is executed, it is executed twice when your cursor is within the query itself. If it is outside the query when clicking on the button, it is executed once (like it should).
2) Locking: we don't have locking problems, but from the moment two people lock each other once, they need to close their analyser and re-open it (so logon again) in order to be able to start planning again in a non-locked part. If they just change their selection (to the not-lock part) they remain locked!!!
3) planning function with multiple variables: system cannot retrieve values of all variables.
details of function:
CMD                                               1       EXECUTE_PLANNING_FUNCTION
PLANNING FUNCTION NAME           1      AG10_COPY01
DATA PROVIDER_FILTER                 1     DATA_PROVIDER_1
VAR_NAME                                     1       PROF_CTR
VAR_VALUE                                    1       510
VAR_NAME                                     2     PERIOD
VAR_VALUE                                    2        012
VAR_NAME                                     3       CUSTOMER
VAR_VALUE                                    3     1000
-> following the instruction of the SAP course, in case of multiplle variables they should start from 0 and have an incremental increase. But the system only recognizes the variable with index = 1
regards
D

Dear Dries,
could it be that the variable type you use require a different set of commands?
In general the parameters of the BEx Analyzer follow the rules of the SAp BW 3.5 Webruntime. When reading this detailed documentation you find that depending on the type of variable other names have to be used, e.g. when using a selection option variable you need something line varname_low, varname_high, ...
The documentation can be found in the online-help:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/07/ff413a3ace7022e10000000a11402f/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/07/ff413a3ace7022e10000000a11402f/content.htm</a>
Best regards, Olaf Fischer

Problem with BEx Analyzer

Hi,
I have a problem with the Bex Analyzer. It is showing th details in German Language and i am not able to do anything on it.
Can anyone help me in this issue.

Dear Tinkugeo,
I also faced same problem, but i Installed latest patch so i got solved my problem.
But if you are running Office 2003 then you required patch from Microsoft. that is related to frame work.
Hope this information will help you.
Thanks
Kiran Patel
SAP BI Consultant
TCS-Ahmedabad

Problem with BEx Web Application Designer

Hi,
we use since last week the Web Application Designer with the SAP GUI 7.2.
Now I have a big problem since last week. I can call existing templates but unfortunately not change! I make a change in the template and save it. When I viewed the template again but no change is saved!
A new template I can create and change
Does anyone know the problem? The behavior also occurs with the old Gui 7.1.
Regards
Edited by: Jana VOGL on Oct 18, 2010 10:14 AM

Hi Jana,
Do you get any error before opening of an existing template in WAD? Doesn't look to be a problem with the different SAP GUI versions. Maybe somethings gone wrong with the Java - ABAP config settings or Java Portal communication settings. Maybe you should check with your BASIS team on the same. Tell them what the problem is & they will run a trace to figure out.
--Priya

User Concern Problems with BEx

Hi to all,
Can you please share some of <b>User Concern issues with BEx</b> and the <u>Solution</u> for those.
Thanks in advance.

check sap note 1007360 and the related notes. also check sap note 1089582
we are getting odd results in very simple formula and also some rows in a query have no data when it should.

Problem with bex analyzer v7

Hello,
I have installed SAP GUI 7.10 and everything is working fine, but the bex analyzer. The problem is that I can see the Toolbox but when Im clicking on the icons of the toolbox it does not work at all, it does not execute anything, so i can not open or edit queries and so on. I have tried to install the last patches (bw 11 and 12), but I can not, I got a message that the patches already exist.
I would like to know what should I install for making it works..hopefully someone could help because I have tried almost everything and I dont know what is the problem.
Thanks in advanced,
Luis

Hi,
I do not mean it, i do not need to launch the correct version of the analyzer from the bw system via rrmx transaction. My problem is that wehn i launch the analyzer via windows like this:
start -> Business explorer -> Analyzer
I can not use the functionalities of the analyzer, they are inactive. The point is: Is it something related with the SAP GUI installion? Have something to do with excel? Or with the windows service pack??
I have installed in my computer the following:
- SAP GUI 7.10
-Windows service pack 2
- Microsoft office 2003.
Thanks and Regards,
Luis

Problems with Bex Brodcasting in version 7.0

When I try to launch from the Query Designer Bex BroadCaster not executed, it does nothing.
What is happening?, It is not already installed? I can do and how?
Thanks

Hi,
Please grant me points if the information below is useful!
Regards,
SUbha
Tools
Use
You can launch other tools from within BEx Analyzer via the Tools function and its submenu.
Features
Create New Query
Use this function to access BEx Query Designer to create a new query. You can insert multiple queries into a workbook. When you choose Query Designer, BEx Query Designer opens or creates the query in the selected cell.
You may want to toggle frequently between the Query Designer (to edit the query) and the Analyzer (to design the interface to the query) as you create workbooks.
See Query Design: BEx Query Designer.
Edit Query
Use this function to access BEx Query Designer to edit the query that has been associated with the current workbook.
BEx Broadcaster
Use this function to access the BEx Broadcaster, with which you can precalculate and distribute workbooks.
See Precalculating and Distributing Workbooks.
This function is only available when you have opened a workbook in BEx Analyzer.
Planning Modeler
Use this function to access the Planning Modeler, with which you can perform planning tasks directly from BEx Analyzer.
BEx Report Designer
Use this function to access Report Designer, with which you can design and execute formatted reports.
BEx Web Analyzer
Use this function to run a report on the web directly from BEx Analyzer.
Activities
●     To launch BEx Query Designer for creating a query, choose BEx Analyzer ® Tools ® Create New Query.
●     To launch Information Broadcasting, choose BEx Analyzer ® Tools ® BEx Broadcaster.
●     To launch Planning Modeler, choose BEx Analyzer ® Tools ® Planning Modeler.
●     To launch Report Designer, choose BEx Analyzer ® Tools ® BEx Report Designer.
●     To launch Web Analyzer, choose BEx Analyzer ® Tools ® BEx Web Analyzer.

Problem with bex query listing sales "this month" and "same month last year

Hi,
I've created a query in BW BEx, where I have a mandatory variable for 0calmonth, and I list 0material and sales (in volume, liter). And I have a restricted key figure giving me sales (volume in liter) restricted with 0calmonth = variable - 12, to give me the sale for the same month the user select, previous year.
This seems to be working, the sum is correct, but when adding up the number for the sales in the month previous year, the numbers does not fit the sum in the end.
I think the report only lists materials with sales the month selected in the variable, if a material has not been sold that month, but in the same month last year, it's not listed in the reports, but it's added in the sum in the end.
Example.
We have three records like this:
material - calmonth - volume
101 - 01.2010 - 5
101 - 01.2011 - 8
201 - 01.2010 - 7
The report will give the following (calmonth variable = 01.2011)
Material - volume this month - volume same month last year
101 - 8 - 5
Sum 8 - 12
Any way to solve this issue? We noticed because we run BO - Webi on top of the BEx query, and BO sum's the values per material, and in webi the report would give us the sum 8 and 5.
Any input is appreciated.
Regards,
Øystein

Hi,
thanks for your reply.
The error is that the report only seems to list materials that has been sold "this month", and if the same material was sold the same month last year, it will also list the volume for this.
But if the material is only sold in the same month last year, it's not listed in the report, but it's calculated into the sum at the end.
The report is listing material, which is why the error presents itself, as you said
Getting 8 minus 12 is correct unless you drill down by material. In that case, it should be 8 minus 5 and 0 minus 7.
The row with 0 - 7 is not shown, and my guess is that the report will only list materials that has sales this month (which has been selected in the variable)
Regards,
Øystein
Edited by: Oystein Gundersen on Mar 21, 2011 4:36 PM

Problem with Bex Customer Exit Variable

Hi Friends,
I have a customer exit variable which is getting filled based on the User Input. I have written the code inside the If condition checking i_step = 2. The code is working as required.
But the problem is when I try refreshing the query or change the user variable selection, the Customer exit variable is not changing. I tried to debug the code and realized that the values for the exit variable based on the previous selection is not cleared and the i_step = 2 is not being executed for the variable.
While I close and reopen the query, the code is working fine.
Does anyone know why this is happening? Please suggest..
Thanks in advance..
Regards,
Priya

Hi Binu,
Here is the code sample. I am trying to populate the month based on the input Week number '0I_WEKIN'
. For eg. If I give 37.2011, the month value should be 08.2011. If I give 39.2011, month should be 09.2011.
WHEN 'ZC_MONTH'.
    IF i_step = 2.     "after the popup
        READ TABLE i_t_var_range INTO lw_var_range WITH KEY vnam =
    '0I_WEKIN'.
       IF lw_var_range-high IS NOT INITIAL.
          l_week = lw_var_range-high.
          l_week = l_week - 3.
          CALL FUNCTION 'WEEK_GET_FIRST_DAY'
            EXPORTING
              week = l_week
            IMPORTING
              date = l_date.
          lw_range-low = l_date+0(6).
        ENDIF.
        lw_range-sign = 'I'.
        lw_range-opt = 'BT'.
        APPEND lw_range TO e_t_range.
    ENDIF.
Regards,
Priya

Sap- access problem with bex( banu,PB,edwin,ravi,voodi,oliver please answer

hi friends,
i installed netweaver trail version.
Old BEx Analyzer 3.0 is ready to use.(below link is showing)
when i run rrmx, i am not getting any thing, please help me regarding this.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/settingUpBIinNetweaver7.0ABAPTrialversion&
this netweaver will work for extraction or not.
if any one will help me ragrding this, its will be great advantage.
regards
suneel.

Hi,
What do you mean by "extraction part will work here or not" ? You mean to say that extraction from source to BW?
If you want you can have the same old flow as 3.x but the environment will be BI 7.0 then in that case you need query desinger to changer / create the queries.
Hope this helps.
PB

Problem with Bex Broadcaster

Hi,
We have used Bex Broadcaster to send a report through mail.It is sending a mail successfully but when we tried to acess report in the mail it is throughing a message that "unable to read file".
Can any one help me in solving this issue.
Thanks.

Hi,
Pls check the format you have selected in Bex broadcasting.
Guru.

Problem with Bex query

Hi ,
I crated a query based on a Infoset.I am trying to run that in RSRT and it gives me this erroe.Can anyone tell me how to resolve this probelm??
Error : Query could not be opne! GENUNID is INVALID , Message no.BRAIN665

Hello,
open the query IN QUERY DESIGNER n check whether its correct.
Save it and provide right technical name and execute it.
Also amke sure you are running the query in the right system.
Generally this error occurs when we do not provide the right name of the query.
You can use the F4 help at the RSRT to reach the right query.
Regards,
shashank
Edited by: Shashank Dighe on Aug 11, 2009 11:45 PM

Winshuttle problem with new excel sheet

Hi ,
I am getting Winshuttle problem after the excel upgraded to latest version.
when i open the winshuttle from icon, i dont get any prompt/no information.
Any ideas fromo experts ?
Siva

We solved the problem by going into the performance settings and disabling the "fade" functionality in Windows. To get to the screen to make the changes in Windows, open the Control Panel and navigate to "System". Open "System" and click on the "Advanced Settings" tab. Next, click on the button marked "Settings" in the "Performance" area. In the "Visual Affects" tab, clear the checkbox for three "Fade... " options.
I tested this successfully, even for users who have no administrative rights on their computer.
Please try this solution and see what results you receive. The strange thing in our situation is that the OS image used for laptops does not suffer the problem with Bex and WinShuttle as does the OS image used for desktop computers.
BG, are you from the UK? I ask as I watch a few UK television programs, and I notice they use "sorted" in the same manner us Americans use "taken care of" or as us Southerners say "figured out".
Cheers,
Kurt

Problem about Bex Exception

Hi All,
I have some problems with bex exception. In my query, I have 3 columns (the third one is a rate calculated from the first (C1) and second columns (C2)). I have a characteristic in row which lists the different values. Sometimes, I have no value for C1 and C2 and also, the value rate is space (thatu2019s normal behaviour). I must highlight some rate by
If rate < 55         bad
If rate => 55      good
I did an exception
Bad        except1    BT      0 to 54
good      except2    GE      55
That works fine but my problem is :
The rate cells with a space value are also highlighted with the bad colour. Have you some idea to avoid this behaviour ?
C1                        C2                                                 Rate
1000                         5                                               200   (C3)
100                        20                                                5    (C3)
space                              space                               space   (C3)
1st C3 is green
2nd C3 is red
3rd C3 is also red (I want to leave blank)
Thanks fot your help.

Hi,
If you are in BW 3.5 then you can make us of class interfaces for this scenario and it was explained here in this article.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0b4cfcc-f9c1-2b10-1bb5-d4b61083d471
Hope this helps you.
Regards,
Rajkandula

Problem with '-' (dash) in BEx web analyzer

Hi All,
we are having a strange problem with 0BPartner and 0Material. Our BPartner and Material have '-'(dash) sign as part of key. While selecting this BPartner/Material in Bex Analyzer, we do not have any problem, but when we try to select the same Bpartner/Material in BEx Web Analyzer, it puts an escape char in from of the dash. For eg:
If i select the Bpartner "1234-5467" then in Web Analyzer selection box, it is displayed as "1234\-5467" in the selection screen.
If i do a search on 1234-5467, it returns zero value.But if i do a search on 1234\-5467, then i get the search hit.
If i enter the Bpartner in the selection window directly and If i do not put the escape char, then it considers the input as range 1234 - 5467 and returns me no value in the report output.
Has anyone had this type of issue? Please respond.
Thanks
Niveda

Thanks Olivier,
Sorry if you had misunderstood my question. They are 2 different Info objects. and i am having problem searching values in each one of these info objects.
Let me explain it with an example.
Scenario:
Let say company defines material in the following format.
"123", "456", "788", "345"....etc.
And I have a report which has material as input selection.
To run this report with single material i enter "123" in the selection screen
To run this report with a range of materials, I need to enter 123 - 456 in the selection.
I have no Issues
Scenario 2.
Consider a case if the materials are defined in SAP as "001-1234", "987-234"
"123-234" etc.
In this scenario, to run the same report for 1 material, i will enter 001-1234. But now the question is how will BW system interpret this material entry.
Is this 1 single material(001-1234) or a material range (001 - 1234)??
We have issue here. The system considers this material "001-1234" as a range (001 to 1234) instead of single material and gives me zero output.
Any help??
Niveda

RRMX PROBLEM WITH BEX

Similar Messages

Maybe you are looking for