RRMX/SSO not working with Win7/GUI 7.2

Dear all,
I'm testing the useability of our BW system with new Windows 7 and SAP GUI version 7.2.
The only way of launching BEx analyzer is via RRMX or portal (using single sign-on) but this is not working. Once i trigger RRMX, Excel 2007 is opened (with Business Explorer Add-In) but when i try to open a query it opens the SAP Logon! The BEx version used is still the 3.5 (but we are in SAP BI 7.01).
Does anyone faced this problem? Do you know if there are specific settings for using SSO or RRMX with GUI 7.2/WINN 7?
Thanks for your help.
Best Regards,
Nuno

Hi Guys,
I have this issue also - I have used the above gui version and BW updates but still this does not work as such!
I donu2019t have the reg key values that are mentioned above but works internally but no over direct access?
We have windows 7 units connecting via a saprouter to a message server inturn connecting them to the application box.
I have tried to create the key manually but still no joy.
If go directly to the application server all works fine!
If I go via the saprouter and then to the application server u2013 again all works fine!
the error in the log sees an IP address ind=stead of the FQDN name
The fqdn name of the saprouter and then an IP address????? However this should be a FQDN name
So the error is something like /H/mysaprouter.co.uk/H/then the IP of application server
/H/mysaprouter.co.uk/H/10.10.10.2
There are no errors in the saprouter log file and nothing that I can see via the cisco firewall???
I can telent on all portsu20263225, 3205 3005
However please also note that this is not an issue when connecting internally via the saprouter, only an issue with Direct access (TCPIPv6)!
Io any of you have any ideas why this would return an IP address instead of FQDN name via the sap router.
This was working a few week oku2026u2026but something has changed and no one know what!
I would suggest firewall issues but I do get teh above errors when trying to connect either via exel or trying to connect backwords via the tc RRMX

Similar Messages

System update does not work with Win7 SP1 RC Wave 1

Just a heads up. System Update on win7 64-bt SP1 RC Wave 1 fails to query available updates.
My guess it is because the operating version number is incremented from 7600 to 7601.
If Lenovo would like me to work with them on testing this combination, please contact me.

Hello,
You may need to wait until Windows 7 Service Pack 1 is released (or shortly thereafter) for Lenovo's ThinkVantage System Update to work with the operating system at its new patch level.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Drop-down box does not work with Web GUI

Situation:
On CE5 (ECC 5.)-> transaction "MM02"
-> click on drop-down for "Material"
-> see distorted pop-up
Solution:
apply kernel patch #144.
ITS is part of the Basis, starting with WebAS 6.40

You wouldn't happen to be using Vista's Home Edition are you? I work from home and have Vista Home on one of my PC's and it has the same issue when I'm connected to 2004s systems. Vista Home isn't supported. Only Vista Prof. Oddly, if I'm using the same GUI to attach to 4.6C releases, I don't have this issue.

Keyboard volume keys not working with win7

I installed Win7 yesterday and have lost the use of the volume control keys, as well as the display brightness keys. I come from XP where they were working.
Any suggestions on how to get them back. I'm using the thin aluminum keyboard.

Thank you for your reply. I thought I was running BC 3.2 32-bit but took a look and it's 3.1.10.
Downloaded the 3.2 32-bit BC update but it wouldn't install because of 2- errors:
Service KeyAgent (KeyAgent) failed to start.
I then pressed "ignore" and got:
Service MacHAL (MacHALDriver) failed to start.
Any advice on correcting these errors?

RRMXP does not work with GUI 7.20

Hi Experts,
I have the following problem. RRMXP does not work with GUI 7.20, BEX 7.0 launches and I have to enter proper user and password. (I get SAP Logon screen with listed systems)
It works properly with GUI 7.10 and I have not to log into BEX.
Did anyone encounter such problem? Does anyone know what causes the problem?
Regards&thanks
Marek

Hi,
RRMXP uses OLE to launch Microsoft Excel together with the SAP BEx add-in. Then it use a macro within BEx to open the workbook. check whether BEx is not installed properly (run SAPBEXC.XLA under C:Program FilesSAPFrontendBW) or the Excel macro security settings prevent execution of the macros.
Also Check the below link it has some note to follow
RRMX and RRMXP does not open the query and workbook
Regards,
Satya

SQLDEVELOPER 2.5 and above on WinXP/Win7 does not work with OID auth ?

Hi,
I have SQLDEVELOPER 1.5 on my WinXP which works fine with database local users as well as global users(OID) authentication. But with SQLDEVELOPER 2.5 and above it throws below error with OID authentication.. local user authentication is however fine.
Status:Failure-test failed:unsupported verified type
Any idea why Sqldeveloer 2.5 and above does not work with OID auth?
Thanks for help
Sivaji

It might be to do with the oracle client version or the JDBC version. (for example v3 needs the 11i jdbc drivers and associated dlls for oci connections.

BEx Analyzer not working in SAP GUI 7.10

Dear All,
BEx Analyzer 7.0 is not working on SAP GUI 7.10. Following are the details:
OS: Windows XP SP2
Installed the following softwares (in the sequential order):
1. Microsoft .Net Framework 2.0 SP1
2. MS Office 2003 (without any service packs)
3. SAP GUI 7.10 (used SAPAllSetup.exe) to install both BEx Analyzer 3.5 and BEx Analyzer 7.0 alongwith SAP GUI 7.10.
While BEx Analyzer 3.5 runs fine, 7.0 does not.
Upon running BEx Analyzer 7.0 from the Programs menu, I see a toolbar on the left hand side on MS Excel in German. Whenever I click on any button, they do not respond.
When I tried to install update for Office 2003 (KB907417), I received the message stating the patch has already been applied.
I also applied SAP GUI 7.10 Patch Level 8, but still the problem remains the same.
Running Tcode RRMX from the SAP GUI opens MS Excel with both the toolbars of 3.5 (on top) and 7.0 (on left). As before, 3.5 works fine, while 7.0 does not.
Do I need to install Office SP2 or SP3, as well? Or something else? Any solutions?
Thanks and Regards,
Sachin.

Hi All,
This problem is due to .NET 2.0 assembly(nothing but .dll's),
Step1 : Check if you can see this C:\WINNT\assembly\GAC exists
If it does and still getting the error, then follow these steps,
1) Uninstall office03
2) Uninstall GUI
3) Uninstall .Net 2.0
4) Reboot
5) Install .dll(WindowsXP-KB935448-x86-dll.exe) fix(this is due to .net1.1 and 2.0 coexistence)----- only if u get a critical message at startup.
5a) Reboot
5b) Install .net1.1
5c) Reboot
5d) Install .net2.0
5e) Reboot
6) Install office 03
6a) Reboot
7) Install .PIA's (O2003PIA.MSI)
7a) Reboot
8) Install setupall.exe for GUI
9) Install KB907---- (office2003-KB907417-FullFile-ENU.exe)
10) Reboot
Let me know if you encounter any problems.
OR....
Update the Latest Patchs of GUI & Bex.
BI710SP03_300-10004472.EXE
bi710sp04_400-10004472.exe
gui710_6-10002995.exe
Hope it helps you...
@shaik

SAP BW Bex 7.3 Queries not working with Enterprise Portal (EP) 7.3 ABAP stack only

SAP BW Bex 7.3 Queries not working with Enterprise Portal (EP) 7.3 ABAP Stack
Dear Portal Gurus,
we want to integrate SAP BW Bex Queries 7.3 into an Enterprise Portal 7.3 EP ABAP Stack only installation.
1) We have Done SSO between EP And BI System
2) System Object is Created
3) When we trying to create Iview of BEX 7.3 report, its executing that report on BI server, we don't have java stack on BI System
4) We have updated the required table in Bi system for executing the report on EP
5) RFC is OK, System Object Test is OK, Report is working independently from Business Explorer, but not working from EP
There no irj services available on BI system, as it is only ABAP stack.
Can anybody help us in achieving our requirement
Thanks in advance
Michael Wecker

Hi Michael,
To integrate portal with BI you need to perform BI Portal integration steps.
Refer to a document link below for guidance purpose.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a?overridelayout=t…
Ensure that you have performed all these relevant steps.
Hope this helps.
Regards,
Deepak Kori

Appletv remote app and airplay not working with iphone 4S

I have the latest appleTV. I have the remote app loaded onto my ipad3 and iphone 4S. The app is not working with iphone 4S, nor do I get the airplay icon, hence I can't mirrior my phone on appleTV. It used to work. I have deleted and reloaded the app, and still nothing. It worked fined until a month ago or so. I have enabled home sharing.
The app and airlplay are working just fine with the ipad3. I have the ipad and appleTV hooked up to my router using 5Ghz, and the iphone only connects to the 2Ghz network on the same router. I don't think this is the issue, because it worked before.
Also, when I click on the remote app on the iphone, to add an itunes library, a code pops up on the phone, which I enter into itunes on my Win7 PC. Nothing seems happed on the computer when I enter the code. Could this have anything to do with recent appleTV or itunes updates? Any possible solutions?

It seems like I am having the same problem.
I have the latest AppleTV 1080, imac 27", ipad, ipad2, 2 iphone 4, all with the latest iOS. After I have the AppleTV connected, a few problems showed up:
(1) ipad plus iphones cannot airplay photo to AppleTV. After the play button and the grey screen displayed "the playing msg on AppleTV", nothing happened. it is the same for ipad/iphone.
(2) iMac not Airplay to AppleTV
(3) Airplay Mirroring not working
The following are done:
- Home sharing enabled
- To test the devices are connected. I set a passowrd for Airplay and the ipad/iphone both requested for it so they are network and devices are ok

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.
Microphone works fine with Quictime on another mac, so I do know how to use it. The one where it is not working (A) had an external microphone and camera attached earlier, and indeed it does work with that external microphone, but not with the internal microphone selected; and (B) had RealPlayer installed previously.
Any suggestions, please?

Hi,
Download Audio driver from here.
Intructions how to install it in Vista/Win7.
Extract this driver with Winrar.
Open Device manager and expand the Sound, video and game controllers section.
Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
Click "Have Disk..." then Browse to the folder where the drivers were extracted .......\V64 for 64-bit Vista/Win7. Click OK.
Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
Click Next, and you're done.
I'm not sure which one from the list will work for You.
This drivers weren't test. So if You will try them and it will work for You let us now about.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

AcroPDF ActiveX print functions are not working with Adobe Reader 9.2 / Actobat Reader 9.3

AcroPDF ActiveX print functions are not working with Reader 9.2/9.3. Tried ActiveX print functions like printPages(), printAll(), printWithDialog(), none of them is working. Tried on platforms: XP 32 bit and Win7 32 bit. These print functions all work fine with Adobe Reader 9.1.0. or 8.2.0 or 8.1.0 on XP 32 bit or Win7 32 bit.
The way I have my setup: I have created a C/C++ project with AcroPDF MFC ActiveX classes. I have created an AcroPDF object in there, and then calling it's LoadFile() function passing a pdf file in the parameter. Then calling the printPages() or printAll() function. With Adobe Reader 9.1.0. or 8.2.0 or 8.1.0, printing is starting through the default printer without any problem. As soon as I update the reader version to 9.2 or more, the same code stops working.
Is anybody noticing any similar issue? Any info on this will be highly appreciated. Thank you!

Unfortunately printWithDialog() is also not working. Actually none of the print functions like Print(), printWithDialog(), printPages(), printPagesFit(), printAll(), printAllFit() are working. All of them works fine though with older reader.
BTW, what security related changes are there for printPages() and printAll()? Can you please elaborate on that? Is there any workaround?

Hp t510 right alt key mapping not working with ctrl + s

Using the HP t510 to launch a xendesktop session via storefront. We have a mission critical application that uses the ctrl + alt + s hotkey to secure itself. The left alt key with ctrl + s is working as it should but the right alt key does not. When testing in the win7 on screen keyboard the right alt and ctrl stay lit up. When hitting the S key after depressing both the right alt + ctrl (right or left ctrl doesn't matter) the alt keys disappear from the on screen keyboard as if they were no longer pushed. They hotkey combination never makes it to the application and it does not secure itself.
I've tested this same workflow on an ASUS thin client, desktop, and laptop hardware with no issues. It does in fact seem to be some hotkey mapping the HP device has baked into it using the right alt key.
Has anyone seen any issues that even closely mimic this? I've seen some for ctrl + alt + del but their fixes don't work for this specific issue.

Hello xXenStatex,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that the alt key mapping is not working with ctrl + s on your Thin Client, and I would be happy to guide you towards a resolution!
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at:
http://h30499.www3.hp.com/t5/Workstations-Thin-Clients/bd-p/bsc-635
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Bdc not working with workflow

Hallo,
I have an issue with a bdc FM i created not working with workflow.
If I test the FM, it works ok.
If i Test the method calling the FM it works ok.
if i test the task calling the method it works ok.
If I run the workflow it doesn't work, and i get the following messages:
S     DC     1     Unable to initialise ABAP Control Framework ...
S     DC     1     Unable to initialise ABAP Control Framework ...
S     DC     6     Control Framework: Fatal error - GUI cannot be reached
A     SY     2     Exception condition "CNTL_ERROR" raised.
What is the meaning of this??
Bdc is calling Me54n to set to click on reject button during Purchase Requisition Release,
putting the PR processing state in status '08'
I checked all the binding which are fine. No container parameter are passed a part from the business object.
here is the FM coding:
FUNCTION ZME_N_WF_REJ_PR.
""Local interface:
*" IMPORTING
*"     VALUE(CTU) LIKE APQI-PUTACTIVE DEFAULT 'X'
*"     VALUE(MODE) LIKE APQI-PUTACTIVE DEFAULT 'N'
*"     VALUE(UPDATE) LIKE APQI-PUTACTIVE DEFAULT 'L'
*"     VALUE(GROUP) LIKE APQI-GROUPID OPTIONAL
*"     VALUE(USER) LIKE APQI-USERID OPTIONAL
*"     VALUE(KEEP) LIKE APQI-QERASE OPTIONAL
*"     VALUE(HOLDDATE) LIKE APQI-STARTDATE OPTIONAL
*"     VALUE(NODATA) LIKE APQI-PUTACTIVE DEFAULT '/'
*"     VALUE(BANFN_003) LIKE BDCDATA-FVAL
*" EXPORTING
*"     VALUE(SUBRC) LIKE SYST-SUBRC
*" TABLES
*"      MESSTAB STRUCTURE BDCMSGCOLL OPTIONAL
subrc = 0.
perform bdc_nodata      using NODATA.
perform open_group      using GROUP USER KEEP HOLDDATE CTU.
perform bdc_dynpro      using 'SAPLMEGUI' '0014'.
perform bdc_field       using 'BDC_OKCODE'
                              '=MECHOB'.
*perform bdc_field       using 'DYN_6000-LIST'
                             LIST_001.
perform bdc_field       using 'BDC_CURSOR'
                              'MEREQ3328-AFNAM'.
*perform bdc_field       using 'MEREQ3328-EKGRP'
                             EKGRP_002.
perform bdc_dynpro      using 'SAPLMEGUI' '0002'.
perform bdc_field       using 'BDC_OKCODE'
                              '=MEOK'.
perform bdc_field       using 'BDC_CURSOR'
                              'MEPO_SELECT-BANFN'.
perform bdc_field       using 'MEPO_SELECT-BANFN'
                              BANFN_003.
perform bdc_dynpro      using 'SAPLMEGUI' '0014'.
perform bdc_field       using 'BDC_OKCODE'
                              '=MEREJECT'.
perform bdc_field       using 'BDC_CURSOR'
                              'DYN_6000-LIST'.
perform bdc_dynpro      using 'SAPLMEGUI' '0014'.
perform bdc_field       using 'BDC_OKCODE'
                              '=MESAVE'.
perform bdc_field       using 'BDC_CURSOR'
                              'DYN_6000-LIST'.
perform bdc_transaction tables messtab
using                         'ME54N'
                              CTU
                              MODE
                              UPDATE.
if sy-subrc <> 0.
subrc = sy-subrc.
exit.
endif.
perform close_group using     CTU.
ENDFUNCTION.
INCLUDE BDCRECXY .
I tries the same approach on ML81N to block a service entry sheet.(pressing the lock icon),
I get exactly the same issue.
Anybody knows how to resolve?
Or how to do the same without using a bdc call?
regards,
marco

Hi
this is the Method callind the FM
object is BUS2105 w delegation ZBUS2105.
BEGIN_METHOD ZRELEASEREJECTED CHANGING CONTAINER.
Data: CTU TYPE APQI-PUTACTIVE,
      MODE TYPE APQI-PUTACTIVE,
      UPDATE TYPE APQI-PUTACTIVE,
     NODATA TYPE APQI-PUTACTIVE.
CTU = 'X'.
MODE = 'N'.
UPDATE = 'L'.
NODATA = '/'.
iobjectkey = object-key.
   CALL FUNCTION 'ZME_N_WF_REJ_PR'
     EXPORTING
       BANFN_003 = iobjectkey
       NODATA = NODATA
       UPDATE = UPDATE
       MODE = MODE
       CTU = CTU
     IMPORTING
       SUBRC = SUBRC
     TABLES
       MESSTAB = MESSAGE
     EXCEPTIONS
       OTHERS = 01.
   CASE SY-SUBRC.
     WHEN 0.            " OK
     WHEN OTHERS.       " to be implemented
   ENDCASE.
SWC_SET_ELEMENT CONTAINER 'Subrc' SUBRC.
SWC_SET_TABLE CONTAINER 'MESSAGE' MESSAGE.
END_METHOD.

Bdc not working with workflow - background task

Hallo,
I have an issue with a bdc FM i created not working with workflow.
If I test the FM, it works ok.
If i Test the method calling the FM it works ok.
if i test the task calling the method it works ok.
If I run the workflow it doesn't work, and i get the following messages:
S DC 1 Unable to initialise ABAP Control Framework ...
S DC 1 Unable to initialise ABAP Control Framework ...
S DC 6 Control Framework: Fatal error - GUI cannot be reached
A SY 2 Exception condition "CNTL_ERROR" raised.
What is the meaning of this??
Bdc is calling Me54n to set to click on reject button during Purchase Requisition Release,
putting the PR processing state in status '08'
I checked all the binding which are fine. No container parameter are passed a part from the business object.
here is the FM coding:
FUNCTION ZME_N_WF_REJ_PR.
""Local interface:
*" IMPORTING
*" VALUE(CTU) LIKE APQI-PUTACTIVE DEFAULT 'X'
*" VALUE(MODE) LIKE APQI-PUTACTIVE DEFAULT 'N'
*" VALUE(UPDATE) LIKE APQI-PUTACTIVE DEFAULT 'L'
*" VALUE(GROUP) LIKE APQI-GROUPID OPTIONAL
*" VALUE(USER) LIKE APQI-USERID OPTIONAL
*" VALUE(KEEP) LIKE APQI-QERASE OPTIONAL
*" VALUE(HOLDDATE) LIKE APQI-STARTDATE OPTIONAL
*" VALUE(NODATA) LIKE APQI-PUTACTIVE DEFAULT '/'
*" VALUE(BANFN_003) LIKE BDCDATA-FVAL
*" EXPORTING
*" VALUE(SUBRC) LIKE SYST-SUBRC
*" TABLES
*" MESSTAB STRUCTURE BDCMSGCOLL OPTIONAL
subrc = 0.
perform bdc_nodata using NODATA.
perform open_group using GROUP USER KEEP HOLDDATE CTU.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MECHOB'.
*perform bdc_field using 'DYN_6000-LIST'
LIST_001.
perform bdc_field using 'BDC_CURSOR'
'MEREQ3328-AFNAM'.
*perform bdc_field using 'MEREQ3328-EKGRP'
EKGRP_002.
perform bdc_dynpro using 'SAPLMEGUI' '0002'.
perform bdc_field using 'BDC_OKCODE'
'=MEOK'.
perform bdc_field using 'BDC_CURSOR'
'MEPO_SELECT-BANFN'.
perform bdc_field using 'MEPO_SELECT-BANFN'
BANFN_003.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MEREJECT'.
perform bdc_field using 'BDC_CURSOR'
'DYN_6000-LIST'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MESAVE'.
perform bdc_field using 'BDC_CURSOR'
'DYN_6000-LIST'.
perform bdc_transaction tables messtab
using 'ME54N'
CTU
MODE
UPDATE.
if sy-subrc 0.
subrc = sy-subrc.
exit.
endif.
perform close_group using CTU.
ENDFUNCTION.
INCLUDE BDCRECXY .
I tries the same approach on ML81N to block a service entry sheet.(pressing the lock icon),
I get exactly the same issue.
Anybody knows how to resolve?
Or how to do the same without using a bdc call?
regards,
marco

Hallo,
I have an issue with a bdc FM i created not working with workflow.
If I test the FM, it works ok.
If i Test the method calling the FM it works ok.
if i test the task calling the method it works ok.
If I run the workflow it doesn't work, and i get the following messages:
S DC 1 Unable to initialise ABAP Control Framework ...
S DC 1 Unable to initialise ABAP Control Framework ...
S DC 6 Control Framework: Fatal error - GUI cannot be reached
A SY 2 Exception condition "CNTL_ERROR" raised.
What is the meaning of this??
Bdc is calling Me54n to set to click on reject button during Purchase Requisition Release,
putting the PR processing state in status '08'
I checked all the binding which are fine. No container parameter are passed a part from the business object.
here is the FM coding:
FUNCTION ZME_N_WF_REJ_PR.
""Local interface:
*" IMPORTING
*" VALUE(CTU) LIKE APQI-PUTACTIVE DEFAULT 'X'
*" VALUE(MODE) LIKE APQI-PUTACTIVE DEFAULT 'N'
*" VALUE(UPDATE) LIKE APQI-PUTACTIVE DEFAULT 'L'
*" VALUE(GROUP) LIKE APQI-GROUPID OPTIONAL
*" VALUE(USER) LIKE APQI-USERID OPTIONAL
*" VALUE(KEEP) LIKE APQI-QERASE OPTIONAL
*" VALUE(HOLDDATE) LIKE APQI-STARTDATE OPTIONAL
*" VALUE(NODATA) LIKE APQI-PUTACTIVE DEFAULT '/'
*" VALUE(BANFN_003) LIKE BDCDATA-FVAL
*" EXPORTING
*" VALUE(SUBRC) LIKE SYST-SUBRC
*" TABLES
*" MESSTAB STRUCTURE BDCMSGCOLL OPTIONAL
subrc = 0.
perform bdc_nodata using NODATA.
perform open_group using GROUP USER KEEP HOLDDATE CTU.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MECHOB'.
*perform bdc_field using 'DYN_6000-LIST'
LIST_001.
perform bdc_field using 'BDC_CURSOR'
'MEREQ3328-AFNAM'.
*perform bdc_field using 'MEREQ3328-EKGRP'
EKGRP_002.
perform bdc_dynpro using 'SAPLMEGUI' '0002'.
perform bdc_field using 'BDC_OKCODE'
'=MEOK'.
perform bdc_field using 'BDC_CURSOR'
'MEPO_SELECT-BANFN'.
perform bdc_field using 'MEPO_SELECT-BANFN'
BANFN_003.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MEREJECT'.
perform bdc_field using 'BDC_CURSOR'
'DYN_6000-LIST'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MESAVE'.
perform bdc_field using 'BDC_CURSOR'
'DYN_6000-LIST'.
perform bdc_transaction tables messtab
using 'ME54N'
CTU
MODE
UPDATE.
if sy-subrc 0.
subrc = sy-subrc.
exit.
endif.
perform close_group using CTU.
ENDFUNCTION.
INCLUDE BDCRECXY .
I tries the same approach on ML81N to block a service entry sheet.(pressing the lock icon),
I get exactly the same issue.
Anybody knows how to resolve?
Or how to do the same without using a bdc call?
regards,
marco

My cc was ugraded to cc2014 and now i've 2 version adobe cc and cc2014, may i withdraw the older version? i work with win7.

My cc was ugraded to cc2014 and now i've 2 version adobe cc and cc2014, may i withdraw the older version? i work with win7.
and why when i installed adobe cc in january 2014 it installed two version 32 and 64 bits?
Thank you very much for your help?

http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
This messages says (at least some) CC 2014 programs use NEW plugins https://forums.adobe.com/thread/1499663
-so do not uninstall the older CC programs if you use plugins in your programs until you are sure you have plugins that work in CC2014
If you are sure you don't need the old CC programs
-http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
-read reply #3 about the ORDER of uninstalling & installing https://forums.adobe.com/thread/1242671

RRMX/SSO not working with Win7/GUI 7.2

Similar Messages

Maybe you are looking for