RS 232 port to communicate between cFP 2100 and Multiple cFP 1808

Hello All,
I am using one cFP-2100 (controller) and two cFP-1808 (network contoller) for a project.
All the three devices have Ethernet port, so i can connect to a network switch for communicating with the Host PC.
My question is:
All the three devices have Serial Ports (RS 232) too, Can i use those ports to communicate between the three devices (1 controller and 2 Net. controllers) and use the ethernet port in the controller (2100) only for communicating with a Host PC?
If this is possible, how to do the RS 232 cabling ?
Regards
John

Hi bjsprem,
You can connect network modules to the controller with serial. This KB shows how to do this. Hope this helps!
--Starla T.

Similar Messages

Any standard RFC there to communicate between satellite system and Solman?

Hi Gurus,
Any standard RFC there to communicate between satellite system and Solman?
Thanks in advance.
Regs,
BBR.

following four RFCs are created so as to initiate the communication between the satellite system and the solman system
_READ, _TRUSTED, _BACK, _TMW
but, you have to Read the Links and the Notes too to understand their names and their meaning
http://help.sap.com/saphelp_sm310/helpdata/en/48/647e3ddf01910fe10000000a114084/content.htm
http://help.sap.com/saphelp_sm310/helpdata/en/b3/dd773dd1210968e10000000a114084/frameset.htm
http://www.slideshare.net/wlacaze/sap-solman-instguide-initial-customizing-presentation

Diifference between WLC 2100 and 4400 and 5500

Hi
what is the difference between wire lan controllers(WLAN) 2100 and 4400 and 5500.

Hello syed
Cisco 5500 Series Controllers:
The Cisco 5500 Series Wireless LAN Controller is currently available in one model: 5508. The 5508 controller supports up to 250 lightweight access points and 7000 wireless clients (or 5000 wireless clients and 2500 RFID tags when using the client location feature), making it ideal for large enterprises and high-density applications.
Cisco 4400 Series Controllers:
Because the Cisco 4400 Series Wireless LAN Controller supports 802.11a/b/g and the IEEE 802.11n draft 2.0 standard, organizations can deploy the solution that best meets their individual requirements. Organizations can offer robust coverage with 802.11 a/b/g or deliver greater performance with 5x the throughput and unprecedented reliability using 802.11n and Cisco's Next-Generation Wireless Solutions and Cisco Enterprise Wireless Mesh.
The Cisco 4400 Series Wireless LAN Controller is available in two models. The Cisco 4402 Wireless LAN Controller with two 1 GB Ethernet ports comes in configurations that support 12, 25, and 50 access points. The Cisco 4404 Wireless LAN Controller with four 1 GB Ethernet ports supports 100 access points. The Cisco 4402 controller provides one expansion slot. The Cisco 4404 controller provides two expansion slots that can be used to add VPN termination.
Cisco 2100 Series Controllers:
These controllers are part of a Payment Card Industry (PCI) certified architecture, and are well suited for retail customers who deploy transactional data applications such as scanners and kiosks. With performance up to 100 Mbps, the Cisco 2100 Series Wireless LAN Controllers also enable small and medium branch offices to deploy collaboration applications such as guest access and mobile voice.

Port-channel Problem between Fabric Interconnect and N7K vPC

Dear all,
I have a problem with Port-channel Uplink between Fabric Interconnect with N7K using vPC
This is my network topology for UCS Deployment
In N7K I has configured vPC for red link and green link, at Fabric Interconnect A I has configured Port-Channel with member is Port 1 and Port 2, uplink is red link. At Fabric Interconnect B, I has configured Port-Channel with member is Port 1 and Port 2, uplink is green link.
The show interface port-channel on N7K is good, every port-channel is up and have all member. But At Fabric Interconnnect, when I see on UCS Manager, the status of Port-Channel on Fabic A and Fabric B is fault with Additional Info: No operational member. Although all link is link up and I has status of Port-Channel is enable on UCS Manager. When I see the Properties of Port 1, Port 2 on Port-channel, I see the membership status is : individual. This mean port-channel is not up and no membership in this configuration. I want to using port-channel for load balance and plus more bandwidth for uplink to 20Gig. I don't understand why ?
Please help me resolve this problem, I has send the capture screen of UCS Manager when I show status of Port-channel and Port-member in port-channel in attach items.
Anyone can help me to resolve this, thanks you very much. Please reference attach items for more detail about fault.
Thanks,
Trung.

Thanks Matthew very much,
I has resolved this problem. The reason of problem is miss match protocol of port-channel between N7K and Fabric Interconnect. The Fabric Interconnect always use LACP protocol, but N7K using Port-channel mode on, that why the port-channel failed. I has configured LACP for port-channel in N7K, it has resolved the problems.
Thanks,
Trung.

Port-Channel issue between UCS FI and MDS 9222i switch

Hi
I have a problem between UCS FI and MDS switch port-channel. When MDS-A is powered down the port-channel fails but UCS blade vHBA does not detect the failure of the port-chanel on UCS-FI and leaves the vHBA online. However, if there is no port-channel between FI-->MDS it works fine.
UCS version
System version: 2.0(2q)
FI - Cisco UCS 6248 Series Fabric Interconnect ("O2 32X10GE/Modular Universal Platform Supervisor")
Software
BIOS:      version 3.5.0
loader:    version N/A
kickstart: version 5.0(3)N2(2.02q)
system:    version 5.0(3)N2(2.02q)
power-seq: Module 1: version v1.0
             Module 3: version v2.0
uC:        version v1.2.0.1
SFP uC:    Module 1: v1.0.0.0
MDS 9222i
Software
BIOS:      version 1.0.19
loader:    version N/A
kickstart: version 5.0(8)
system:    version 5.0(8)
Here is the config from MDS switch
Interface Vsan   Admin Admin   Status          SFP    Oper Oper   Port
                  Mode   Trunk                          Mode Speed Channel
                         Mode                                 (Gbps)
fc1/1      103    auto   on      trunking         swl    TF      4    10
fc1/2      103    auto   on      trunking         swl    TF      4    10
fc1/9      103    auto   on      trunking         swl    TF      4    10
fc1/10     103    auto   on      trunking         swl    TF      4    10
This is from FI.
Interface Vsan   Admin Admin   Status          SFP    Oper Oper   Port
                  Mode   Trunk                          Mode Speed Channel
                         Mode                                 (Gbps)
fc1/29     103    NP     on      trunking         swl    TNP     4    103
fc1/30     103    NP     on      trunking         swl    TNP     4    103
fc1/31     103    NP     on      trunking         swl    TNP     4    103
fc1/32     103    NP     on      trunking         swl    TNP     4    103
Any thoughts on this?

Sultan,
This is a recently found issue and is fixed in UCSM 2.0.3a version .
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCua88227
which got duped to CSCtz21585
It happens only when following conditions are met
FI in End host mode
FC uplinks are configured for portchannel + trunking
Certain link event failures ( such abrupt power loss by upstream MDS switch )
Padma

How to get MDM communicate between Razr HD and computer

I hooked up my new Droid Razr HD running 4.1.2 to my computer running W7 Enterprise and it registered as a CD drive E: containing 32 MB and no free space, containing the MDM drivers, setup, and autorun files. I got the popup asking to install the MDM, and clicked on that, and closed all other running applications. Seemed to install, but the drive listings in Explorer did not change to show a mass storage drive. Phone does have Settings-USB Storage-MTP checked. I uninstalled MDM, went to the Motorola website and downloaded the latest version of MDM. Installed, same result. Tried running Microsoft FixIt to see if there was a registry problem, so CD E: MDM was taken out of the listings in Explorer. Reinstalled MDM from the Motorola website. Same result, except now if I click on MDM setup in Explorer, nothing happens. I want to transfer files from my computer - pictures, mp3's, files, etc - from my former Blackberry that were saved to my computer.

You could try Blue Tooth. That's how I prefer to transfer files between my laptop and Razr.

Communicate between a pageframent and region components

Friends,
I have a usecase as below
I have two page fragments let's say page1.jsff and page2.jsff , page2.jsff is bounded to taskflow, I have dragged the page2 taskflow as a region on to page2.jsff.
I have a button in page2. jsff , and when I click on this button, I want to access the few of the components available in page1.jsff in page2.jsff associated backing bean.
How can I access the page1 components in page2 backing bean ?
Thanks in advance

Hi,
the correct option to interact between regions or a region and the parent page is to use contextual events: http://download.oracle.com/docs/cd/E15523_01/web.1111/b31974/web_adv.htm#CACJBFGI.
You can also use a managed bean in session scope, but this creates a dependency between the regions, which means they will no longer be reusable (which in some cases is not required anyway)
Frank

What ports to open between Connection broker and Web access hosts

I have setup a 4 node 2008 R2 RDS farm (1 connection broker, 1 Web access, and 2 session hosts.) They were all built from the same image, but the web access and connection broker will not talk to each other. They are all on the same subnet, and ips are x.x.x.200-203 The Web access server can ping the Sesions hosts, the session hosts can ping each other, web access and the connection broker. But the Web access and Connection broker cant ping each other. I turned off the windows firewall and they can ping, and connect... So whats ports does it need open?
Thanks!
~M

Hello,
Do you need any further helps? Please let us know it. Thanks.
· Lionel Chen
TechNet Subscriber Support in forum
If you have any feedback on our support, please [email protected]
This posting is provided "AS IS" with no warranties, and confers no rights.

Comparision between single Plant and multiplant.

I am doing practice for creation of one organization structure,
At the starting i have one plant under which their are 3 storage location located in different cities.
The Value of material is same in all cities, now i think define each storage location as plant, then what effect will get on the
business.
Can anyone explain me the advantages of multi -plant against single plant?
which process is beneficiary for business process?
Thanks;
Baya Jo.

Hi
At the starting i have one plant under which their are 3 storage location located in different cities
1 ) see first storage location never situated far way from plant its in different cities it should be plant or warehouse or depo
If manufacturing activities happen there then it should be plant
If its only for saleing purpose ,then it will depo ,or only storing purpose it will warehouse
pupose of this ( if you have all three plants ,you get valuvation differntly for each plant )
If you have single plant ,no mater but valuvation will be at single plant level,you cannt get valuvation per citied for you business for you material and releates things
my suggestion consider it plant or depo if it in differnt cities
Regards
Kailas Ugale

A problem that how to communicate between PLC S7-300 and IA Server

The PC running the OPC server is connected to PLC S7-300 via the RS232 serial port and the Siemens RS232-MPI adapter (product no. 6ES7972-0CA23-0XA0).
But I encounter such problem when I create an object(S7_HMI)in IA Server:
Step 1：
links:http://www.simwe.com/forum/upload/2005/04/30/87472755.jpg
Error message:
Protocol error:Unexpected response from PLC
links:http://www.simwe.com/forum/upload/2005/04/30/48471774.jpg
When I communicate between S7-300 and PC by LOOKOUT 5.1,it works well.
Could someone give me help? Thanks a lot.帖子被qzxin在05-08-2005 04:54 AM时编辑过了
帖子被qzxin在05-08-2005 04:56 AM时编辑过了

First of all, Thank You very much for Your answer.
I'm using the TS Adapter that make the conversion from MPI to the serial bus.
I have made yet control panels to supervisor systems with Omron PLCs and I correctly use the DataSocket with the DSC module: with Omron PLCs I've never had any problems of communications. The problems is now with Siemens. For the communication between control panel and PLC I have to use the internal modem of my computer and the OPC is S7_MPI of IA opc Server.I wondering if this OPC is ok for modem communications (inside there is a form to insert the phone number of the remote station) or if every kind of modem are compatible with S7-300 modem it has inside.I've noted that my computer modem don't do the phone number when i run the front panel!In running mode, if I take a look to the Block Diagram and I click the "Highlight Execution" button I don't see any animation on the code generated by the HMI Wizard to connect the only one tag to the DataSocket URL.
Have You any other suggestions to solve the problem?
Massimo Lazari

Can NI-PSP be used to communicate between machines developed with different versions of LabVIEW?

Hi all,
A customer has a large PC application developed with LabVIEW 2010 SP1.
They would like to add extend their system with a cRIO-9075. According to this document (ftp://ftp.ni.com/pub/devzone/tut/crio_software_versions.htm ), the minimum supported version of LabVIEW (with Scan Engine support) is LV 2011.
To minimize risks, it is preferred that we don't upgrade LabVIEW for the main application, which is atively being used in production.
I was thinking of developing the cRIO software in a newer version of LabVIEW (say, LV 2013 SP1), and using shared variables only to communicate between the PC and the cRIO.
Is this a viable option? Does it matter if the PC and the cRIO have different versions of the LV runtime?

It shouldn't matter, but then with shared variables you can never know for sure -- there are so many things that can make them break.
You might be money ahead to write the comm using TCP/IP. You know that will work.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

E4200 - Problem communicate between 2.4 & 5ghz devices

Hi,
i have E4200 smart wifi and this is updated to latest firmware.
i connect satellite reciever to 2.4ghz network and connect computer by linksys AE1000 to 5ghz network ... but in this case can't communicate between computer & satellite reciever .
also i ping satellite reciever ip address from computer but not pinged ...
but if i connect both satellite reciever & computer to 2.4ghz network problem resolved & both device communicate between other ...
how can communicate between 2.4ghz and 5ghz network devices connected to E4200 smart wifi ...?
sorry for bad english.........
THX.

This shouldn’t be an issue. Upgrade the router’s firmware to the latest. Reset the router to factory defaults and reconfigure the router after the upgrade process.

Communicating between the parent and child windows in Struts

Hey,
I would like to know what is the best way to communicate between the child and parent windows on a struts based web application. For example i have a struts based jsp page. I call a child window from this page. On the child window i select few values and they have to be shown on the parent. What is the best way to achieve this in struts.
Thanks
in advance.
KM

The only way to do this without Javascript is to have the child window have a form and the form has a target defined as the name of the parent window (how to name it without using frames or having it open from another window, I'm not sure), and when you submit the form, it'll submit to the parent window/frame and you can process that form on the server and return the same parent page with the selected values.
Otherwise, you need Javascript to set form values to "window.opener" from the child window.
Either way, it's not really a Struts thing, technically.

Connection between IS-Oil and IS-Banking

i need some help on what to do to communicate between IS-Oil and IS-Banking. my data is in is-oil and i need it to do a transaction in is-banking if i can use rfc what set up do i need to do to make it work or there are others that i can do. i appreciate your help thanks in advance.

You can have the communication between the two systems either by using RFC's or IDOC's. For both, you will have to create a RFC destination in SM59 transaction, usually done by the BASIS consultants.
Once that is done you call a remote enabled function from the other system, while specifying the destination of the function, which is the name of the RFC dest, that you created in SM59.
For IDOC scenarios, take a look at this blog.
/people/kevin.wilson2/blog/2006/11/13/ale-scenario-development-guide
Regards,
Ravi
Note : Please mark all the helpful answers

How can I communicate between two computer via RS 232 port?

I would like to communicate between two computer in order to servo a motor motion to an acquisition.
Thank you in advance for your answer an your solutions

PreScript: I did not rate the above answer!
Here's a VI I use to test my instruments - if you have it running on both PCs, you should be able to communicate (with the help of a Null modem between them - cross Rx and Tx) - hopefully this will get you started.
cheers,
Christopher
Christopher G. Relf
Certified LabVIEW Developer
[email protected]
International Voicemail & Fax: +61 2 8080 8132
Australian Voicemail & Fax: (02) 8080 8132
EULA
1) This is a private email, and although the views expressed within it may not be purely my own, unless specifically referenced I do not suggest they are necessarily associated with anyone else including, but not limited to, my employer(s).
2) This email has NOT been scanned for virii - atta
ched file(s), if any, are provided as is. By copying, detaching and/or opening attached files, you agree to indemnify the sender of such responsibility.
3) Because e-mail can be altered electronically, the integrity of this communication cannot be guaranteed.
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.
Attachments:
Test_RS-232_Serial_Communications.vi ‏118 KB

RS 232 port to communicate between cFP 2100 and Multiple cFP 1808

Similar Messages

Maybe you are looking for