RS 422 serial adpator for FCP

can anyone recommend a good RS 422 serial port adapter for my Mac Pro. I have a intensity card, but I need deck control for my Sony UVW 70 Beta Deck. Any suggestions? I alread have the USB to serial port adaptor cable. I just need the RS 422 adpator at this point.

Try asking the people who actually carry the hardware you need; try Abel-Cine, VTP or VMI in the LA area or Omega Broadcast in Austin and a host of other pro-video distributors/dealers who will not only know what you need but will most likely have it in stock. If you need a list of other pro-video equipment suppliers go to DVinfo.net and look up their sponsor list.

Similar Messages

How do I change a serial number for FCP Studio entered in error

I recently had to reinstall everything and I used the serial number for a co-worker's software by mistake. I have the right serial number, but when I try to re-install, the pane for entering the serial number never comes up and I end up with the same problem. I've tried deleting everything, including the p-list, before re-installing. I've also downloaded Preference Manager for that.

look for the FINAL CUT STUDIO SYSTEM ID in your hard drive>library>Application Support>ProApps
Drag it out of the folder into the trash and relaunch

HT5148 have serial number for fcp x, how do i upgrade from trial?

Have 6 licenses from Apple
downloaded and installed trail version
how do i enter serial numbers?
Thanks in anticipation

I do not have vouchers
i have 6 licenses
the machines (edit suites) to be installed do not connect to the web
Do you have any idea how i can enter serial number / upgrade from Trial?

How to find serial Number for BCC Plugin?

Hi,
How to find serial number for Bcc plugin on FCP?
I need format my Mac so before that I to find the serial number?
Please anyone can help me....

The serial number has the format like E-111-aaa-222-bbb-333-ccc-444-ddd-5ee-ffff, it can be found on a piece of paper which has 3 stickers with it inside the box.

How can I find out the serial number for my FCE 4.0 that came with my old MacBook Pro?

When I try and open my old FCE projects on my new MacBook Pro, a dialog box pops up and asks me to input the serial number for my Final Cut Express program. The software came pre-loaded on my old MacBook Pro which died. Luckily, my local Apple store was able to transfer the fcp files to my new MacBook Pro, which came with FCP X installed. I just can't open those files without the serial number of the FCE 4.0 program.
Message was edited by: Garyb1978

It is almost impossible to transfer FCE as there are so many essential hidden files that workers in an Apple Store will know nothing about. The app needs to be installed from the original DVD.
Other than buying another copy your only chance (very remote) is to contact the Apple Store and see if they are able to get a replacement number from Apple.

Can I combine codec m2v1 with apple ProRes 422 (HQ) in same FCP X project?

Can I combine codec m2v1 with apple ProRes 422 (HQ) in same FCP X project?
Everything else is same. 29.97, fps, 1920 x1080, Linear PCM, 48kHz, mono, .mov
If not, could I add the logo animation after outputting to compressor using QuickTime 7?
I'm re-wrapping footage from Canon XF100, which is why m2v1. I like working this way to preserve original footage.
I just had my logo animated and designer matched everything except the m2v1. Providing ProRes 422 (HQ)
Thank you for your thoughts. I'd like to avoid changing my camera footage to Apple ProRes 422 (HQ).

Hi Mary,
I'm new to FCPX too!
When creating a new project, if you click on Use Custom Settingsand then ckick on the Custom checkbox in Video Properties, you can specifyexactly what you want!
If you need to change it after the project was craeted, I found that you can click and highlight on the project in the Project Library window, then go over to the "info" button . The Properties window will expand from the right side (above the "info" button . With Properties selected it will show you the present settings, if you need to change those settings, click on the icon of the WRENCH on the bottom of that dialog box (Properties). You can then change your settings.
Good luck, and happy cutting!
Jb (James)

Need advise on best settings for FCP 7!

I am looking for some advice on the best settings for FCP 7 when I am syncing sound using pluraleyes, exporting into quicktime as one file and then importing that new file into FCP 7 for editing. I have noticed that sometimes my Quicktime files are very large (20 gb) and sometimes they are much smaller (130 MB), but I never changed the settings.
I am working on FCP 7 and shot using my Panasonic GH3 at 24 fps (which comes to 23.98). My frame size is 1920x1080. Compressor is H.264. Data rate: 8.6 MB/sec. Audio rate: 48.0 KHz. I have heard that FCP 7 does not properly deal with H.264. So, I am wondering, what should my settings be? Should I set to "Apple ProRes 422 (HQ) 1920x1080 24p 48 kHz"? Is there anything I need to know when I export to Quicktime 7 Pro in order to not reduce the quality of the video? Should I be changing my video files first before I even start to work on them?
I haven't edited in almost ten years so I am desperate need of some guidance!
Final Cut Pro 7, Mac OS X (10.6.8)

Hi Shane Ross,
Thanks for your help. So, I already synced all of my interviews in FCP 7 (using pluraleyes) before I changed the video to ProRess 422. Can I just go into FCP (in the same project) and compress the video footage, import the new video files and throw it into the timeline? Or will this cause issues? I tried this as a test and it seems to be okay but I just want to check that there aren't any issues that I am not considering.
Also, when I do compress, it seems to take forever (sometimes two hours). Is there any way to make this move along faster?
Thanks so much!

C-Series Module NI 9871, 4-Port, RS485/422 Serial Interface

I have a question regarding the C-Series Module NI 9871, 4-Port, RS485/422 Serial Interface.
I need to find out how it recovers the data from the link. I need to compare it with 8b/10b encoding.
Does anyone know what UARTs are used or how the data is recovered.
Thanks
John Lee

Hi John,
I have had a look into this and I cannot find any specific information on the Transciever or UART. However I have come across an example using the 9871 with processing on a cRIO FPGA.
To find this example open up Labview » go to Help » Find Examples » Search for 9871 and open up NI-987x Serial Loopback.lvproj.
Hopefully this should give you a good start. Once your serial data is passed onto the FPGA you can then decode the 8b/10b within the FPGA code.
Best Regards,
Ben B.
Applications Engineer
National Instruments UK & Ireland
"I've looked into the reset button, the science is impossible!"

Converting through PavTube for FCP 5

I just purchased and downloaded the PavTube HD Video Converter for Mac. I shot video with a Canon Rebel T3i and saved the footage in a folder. I then uploaded it to the PavTube Converter, chose Apple ProRes 422, and tried to convert, but I received this error:
The current profile requires FCP 6 (or above versions) to be pre-installed.
I have Final Cut Pro 5. Is there any way to make this work? I really need FCP to work with this footage because the raw footage going directly into FCP is VERY slow and requires lots of time-consuming rendering.
What do I do???
Thanks!

Sorry, FCP 5 doesn't do ProRes. ProRes was introduced with FCP 6...so yeah, you pretty much have to have FCP 6 or 7 in order to work with ProRes. FCP 5 won't even WORK with ProRes footage. The options for FCP 5 are DVCPRO HD (that's anamorphic HD...not full raster like ProRes, but what you have)...or uncompressed HD. But that requires very fast hard drives to play back. DVCPRO HD is your best bet if you are stuck on FCP 5.
Editing the raw footage is NEVER recommended in FCP.

Best format to convert Ultra HD Flip Camera file for FCP editing?

We are using two types of cameras for a video project and one of them is a Flip Camera. Unfortunately, FCP doesn't play too nice with raw flip camera files so I need to convert said file using MPEG Streamclip. What is the best/recommended format to convert the movie file to for FCP editing?
Thanks!

From my experience, Pro Res 422 has been the most recommended for any conversion. Thanks!
Should I look for a specific audio compression option or should I just leave it as "uncompressed"?

Help Locating my serial number for Final Cut Studio?

Can anyone help me in Locating a serial number for my Final Cut Studio??-- I dont know where the booklet "installing your software" is --i have all other disks and books-- i need to upgrade from FCP5.1 to 6.2

The booklet is the only place where you can find the serial #.
There is a file on your computer, but it is encrypted.
You might be able to get the number from the splash screen (Final Cut Pro > About Final Cut Pro) but I have heard that it is not displayed in full in some releases. It certainly displays in full on the FCP 7 splash screen.
Should none of the above help, follow the instructions here: http://support.apple.com/kb/HT1861

Where do I locate the serial number for the online product I ordered?

Where do I locate the serial number for the online product I ordered?

Hi tomkea fcps,
I've checked your account; I see that you recently purchased an Adobe PDF Pack subscription. As such, there is no serial number required. To access your subscription, you can log in directly to https://cloud.acrobat.com using your Adobe ID and password.
Please let us know how it goes.
Best,
Sara

My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?

http://support.apple.com/kb/TS2005
http://support.apple.com/kb/HT1861
https://ssl.apple.com/support/proapps/serialnumbers/

How do I find a serial number for my iPod touch that I used with iTunes

I used my iPod touch previously to down load music and I am looking for the serial number for that device....is the information stored in iTunes somewhere?

The serial number of your device can be located at the back. Check on this page for more information.

DVD Footage for FCP Edit - how to tell if NTSC or PAL?!

Hi all, apologies if this seems like a stupid request but I have a job at the moment calling for me to extract footage from a DVD, edit in FCP, add a few bits from Motion etc., but I can't work out if the DVD is NTSC or PAL!
I intend to extract the video (no issues with copyright) via DVDxDVPro but am unsure if the DVD has been encoded in NTSC or PAL. The footage it contains is from both the States (NTSC) and South Africa (PAL) so how do I tell? I don't want to go through a standards conversion if I can help it.
I am keen to try to retain as much quality as possible (client can't provide tape) so also any thougts on the best output from DVDxDVPRo for FCP editing?
Thanks all,
Best wishes
Michael

Hi Thomas, that's it!
Thanks for this - it clearly shows the TV standard and the resolution plus 4:3 etc., so everything I needed for confirmation.
Glad I cheked because it was in Pal - thought the conversion in DVDxDVPro looked a bit ropey.
This realy baffled me - seemed so simple but couldn't find a way to tell the standard. Learn something everyday...
I am using DVCPro for export from DVDxDVPro - anyone thoughts on a better option?
Thanks again for the answer - and so quick on a Sunday too!
Kind regards
Michael

RS 422 serial adpator for FCP

Similar Messages

Maybe you are looking for