RS-MMC card help

Hiya,
i bought a 256mb card for my N70, transferred everything from the old 64mb card across, but can't get it to see the crad in the phone. Any help gratefully recieved.
Alan

It's not a Kingston Card is it? They seem to have problems with Nokias more than others.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Similar Messages

Access CF/SD/MMC cards using Adobe AIR

Hi
Iam a newbie to Adobe AIR development, and I would like to know whether AIR application can access USB devices (such as CF/SD/MMC cards) and retrieve serial key (Non-volatile hardware key) number of that media card.
It would be greate help if anybody can provide me a solution, if possible with some sample code.
Thank you
Mahesh.

I might have rushed it a little: It works for a short period after the boot, but then theres that nasty kworker thread again:
Cn Avg residency P-states (frequencies)
C0 (cpu running) (51.7%) Turbo Mode 51.7%
polling 0.0ms ( 0.0%) 2.27 Ghz 5.9%
C1 mwait 0.0ms ( 0.0%) 1.60 Ghz 7.8%
C2 mwait 0.2ms ( 5.7%) 800 Mhz 34.7%
C6 mwait 1.0ms (42.5%)
Wakeups-from-idle per second : 708.5 interval: 3.0s
Power usage (ACPI estimate): 15.6W (1.5 hours) (long term: 12.5W,/1.9h)
Top causes for wakeups:
35.3% (604.0) kworker/0:0
33.5% (572.3) [kernel scheduler] Load balancing tick
15.9% (271.7) [iwlagn] <interrupt>
5.2% ( 89.3) firefox
5.1% ( 87.3) [i915] <interrupt>
1.9% ( 32.7) kwin
1.1% ( 19.3) [acpi] <interrupt>
0.4% ( 6.0) [ahci] <interrupt>
0.3% ( 5.7) thunderbird-bin
0.2% ( 2.7) plasma-desktop
0.2% ( 2.7) htop
0.1% ( 2.3) yakuake
0.1% ( 2.0) mysqld
0.1% ( 1.7) [kernel core] sk_reset_timer (tcp_delack_timer)
0.1% ( 1.7) [kernel core] hrtimer_start (tick_sched_timer)
0.1% ( 1.0) sleep
0.1% ( 1.0) thinkwatt
0.1% ( 1.0) X
Suggestion: Enable the CONFIG_INOTIFY kernel configuration option.
This option allows programs to wait for changes in files and directories
instead of having to poll for these changes
I used to have around 10 watts average, now it's up to 15 or sometimes even 20 watts.
Last edited by akurei (2011-05-19 15:37:00)

Satellie A100: How to use MMC card in card reader

Hi everybody,
first of all I have a Toshiba Satellie A100 Notebook.
And now my question: at the front of the (closed) Notebook, there is card reader slot, right next to microphone and volume,etc.
I have a MMC card of my mobile phone, but it doesn't fit in becuse the slot I much to big. Do i need an adapter? I'm afraid, that i won't get it out anymore afterwards!
Can somebody help me please?!
Thanks!
grettings, thomas87

No, i don't mean the express-card-slot on the left side of the notebook.
sorry, it is a satellie A100-773.
I have already looked into the manuals and there is a cardreader SD/MMC/...
under the slot there are also symbols of different mediacards!
so it does really exist! =)
but how to use it? it's such a big slot, and the mmc is rather small. so how should i put in the mmc? more left, or right or in the middle...you know what i mean? or do i need an adapter?
thanks, thomas87

Mmc card error on pc cam 850

Hi, please help me why i can not use my 'Infineon 64 mb MMC Card' on my pccam 850? i have never use mmc card before, and this is the first time, but everytime i insert my mmc card then turn the camera on, i get only hear camera startup and the light on, but blank on the lcd screen and i cannot use any button (the camera hang/freeze), the only way to turn the camera off is to open the battery. FYI, the MMC card is ok (i'm sure with that),but if i'm not using any MMC card, the camera works fine (with built in 16 Mb memory). Please help me.
Thanks
Lana's

HI,
I get the same behaviour but with a Kingston 128MB SD card. Did you find a solution to this?
Thanks,
vinod

Saving web pages direclty in MMC card

how to save directly web pages into memory card in Nokia 6680 as its not asking the option while saving a web page?
Even i dont have option to transfer saved web pages to MMC card,Please help!!

no you cannot move it. on the contrary, you can add the page to bookmarks instead of saving it.
Click on KUDOS to appreciate our efforts and mark the thread RESOLVED if your issue is resolved.

Equium A100-306: Vista doesn't read MMC cards - MMC1 device has no driver

Have installed all the vista drivers from the toshiba support page and my card reader reads SD cards well.
However when I insert an MMC card Vista searches for drivers but cannot find any. Says MMC1 Device has no drivers.
Help Please

Did your Equium read MMC card with XP? If yes, then I suggest you to reinstall your drivers and check if you forgot to download some drivers to download/install.
Sometimes you can find drivers which are not on the european website on the canadian website of toshiba:
http://209.167.114.38/support//Download/ln_byModel.asp
Hope you will be successful. :)
Greets

Problem with new mmc card

Hi. i hope someone can help me. Just bought on contact a nokia 6630. Its very good. Decided to but a rs mmc card of 512 mb for more data storage. Problem is the phone doesnt see it. Any ideas on what i need to do. Thanks Andy

Just an "MMC for mobiles" is not enough. It must be labeled exactly (letter-for-letter): "MMCmobile" (or "DV RS-MMC"). Other types of cards do not work.
If it is of correct type, then check that you put it in the card slot the right way (the card's connector surfaces upwards) and far enough (to "click" in place).
If even those don't help, check that the phone's "Memory" app sees the card and lets you format it (in case it for some strange reason or another wasn't formatted).
If that's not enough, then you have either a broken card or a broken phone.

MMC CARD PASSWORD LOST

I had my phone replaced yesterday. now when i place my old memmory card in the new phone it is asking for a password access code. i have tried the phone pin code and security code, however they are incorrect. my mmc card has my sat. nav. and i am desperately trying to sort this out. can anyone help on this. thanks a lot.

A password on a memory card is used to prevent the use of the card in another phone (in case you loose it, or it gets stolen). If you set it, you should also remove it on the original phone (with the same password that was used you set it), before using the card in a new (another) phone.
If you've lost or forgotten the password, then there is no easy way to recover any data from the card (if it was easy, there wouldn't be much point in a password feature like that in the first place, would there?).
It might be possible to reformat the card in some other device (most devices won't do/allow it, if the password has been set and is not supplied), but reformatting the card will also cause all data to be lost.
A data recovery service (such as Ibas might get the data for you, but the cost for using such a service will probably far exceed the price of the card and the phone (you can probably get many new cards and phones with that money).Message Edited by petrib on 01-Dec-2005
05:59 PM

I bought a ipod 4th gen and when i try login in with my apple id it says my security pin is wrong but its the 1 from the card help!!

i bought a ipod 4th gen and when i try login in with my apple id it says my security pin is wrong but its the 1 from the card help!!

Contact iTunes. See the iTunes Store Account and Billing topic of:
Apple - Support - iTunes

Nokia "Original" RS DV MMC cards

I've got a Nokia E60 and uptil now I've had a 256MB Yama or something like that RS MMC card for the phone, which was working great, it was fast in read/write operations. Not long ago I purchased one from Nokia, the so called "Original Nokia". Well I have to say that I'm very dissapointed by the write times for this card (and I have to say that it's not the first time I have an Original Nokia MMC Card. Writing operations take 3-4 times as long as on the 256MB one. What gives? Does anybody have a solution for this strange problem? I've already tried to format this in my phone but the result is the same
br
blesio

thx guys for your replies.
I bought one , a very known mark but doesnt work.!
It is MMCmobile (DV-RS-MMC comp with 6630)
I put it at my laptop and works fine.
When i put it at my mobile doens make any sound(when i close the 'tray') and doesnt recognize the card( NO M.card installed ).
I try it at 6630 and N70 both.
And the mobiles are working already with some others m.card.
But the cards works at my laptop!
I have formatted with FAT but still nothing
Any suggestion ?

Content Copier does not backup files from MMC card...

The option to backup files from the MMC card is missing in current PC Suite version 7.1.40.1 (it was available before PC suite was updated in december 2009).

Hi,
Could you please get some clue from here
/discussions/board/message?board.id=topfaq&thread.id=132
I will let you know once if i get this device to check

Does an upgraded graphics card help stability within FCP?

I have been having some issues, working on a documentary about two hours long shot on Sony EX-1. The timeline contains a mix of footage (24 1080p, 30 1080p, 24 720p, 30 720p) all rendered to 30fps ProRes 422. No effects at this point, mostly just the transcoding during render.
It crashed when I export through compressor to DVD, and will not render the whole project without crashing. Sometimes, when I select just a portion of the project to render, within the main timeline, once it is done renedering that section, it looses the rest of the render for the entire project.
All this points me to some hardware issues, probably ram, but i have been advised to purchase a high end graphics card to carry the burden of exporting. (currently using the stock ATI Radeon HD 2600) As far as I have known, a graphics card holds no bearing on this process. I know a new graphics card helps a lot in Motion, AE and such, but I am only concerned about editing in FCP at this point.
Thanks for any thoughts you may have.

Are you mixing formats and resolutions in the timeline? If so, you might consider converting all the the same format before editing.
Try exporting a selfcontained quicktime and then bringing that quicktime into compressor.
Oh yeah, make sure you don't have any cmyk graphics.
Message was edited by: Michael Grenadier

Oracle lite in SD/MMC card

Does anybody knows whether Oracle Lite allows to Store the database in memory stick, like SD or MMC card? Thanks in advance.
Anton

Oracle9i Lite 5.0.2 Windows allows you to use CompactFlash card on PPC to store Oracle Lite database. In fact 5.0.2 used the CompactFlash as default drive.

Need an MMC Card

I need an MMC 512 MB card for my Nokia 6230i.
I am finding it hard to get one. The ones I have sent me all seem to have two rows of contacts on them and don't work so have had to return them. The card supplied only has one. So my question is where can I get one please?

MMC cards are becoming rare because there are newer, better systems on more recent phones. I think the Nokia MU-12 card was compatible, but it may need an MMC adapter too - it's a long time since I dealt with a 6230i so you might need to check your user guide.

HT2731 how can i install free application in my iphone 4s i am a student and i haven not a credit card. help me

how can i install free application in my iphone 4s i am a student and i haven not a credit card. help me

There are instructions on this page for how to create a new account without giving a credit card number : http://support.apple.com/kb/HT2534 e.g. select a free app in the store and click on 'create Apple id' when 'buying' it

RS-MMC card help

Similar Messages

Maybe you are looking for