RS140 - Hard Drive Mounts / SAS Mini power cables

We have purchased a few trimmed down RS140’s and we are now looking to add more hard drives. We currently have 2 problem, we are unable to find the SAS 4x power adapters mentioned in the manual. The 2nd is we are unable to find the proper mounting bracket to fit 2.5 inch SAS hdd’s. I have not been able to get an answer from google of all places or from the company we purchased the servers from. Can someone please tell me how to order these parts as I do not seem to see them available on Lenovo’s site either.
Solved!
Go to Solution.

Good day and welcome to the community.
I'll disclaim right up front that I have no experience with these devices, but I hope the info below helps you zero in on what you need.
First, here's the hardware manual for the RS140: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkservers/rs140_hmm_ug_en.pdf
Next, here's the service parts list for the same: http://download.lenovo.com/parts/ThinkCentre/rs140_service_parts.pdf
A quick look makes me think it will have useful P/Ns for you in the Cables and Mechanicals sections.
Finally, I took a wild stab with these two FRUs:
00FC375 - Mini-SAS to 4X2.5" SAS Combo Cable
00FC519 - 2.5HDD BRK
at the maintenance parts site: http://www-304.ibm.com/shop/americas/webapp/wcs/stores/servlet/default/PromotionDisplay?promoName=pa...
and both come back as "In Stock".
Hope this helps a bit.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Similar Messages

After installing Mountain Lion doesn't external hard drives mount or stay mounted. Anybody else with this major problem?

After installing Mountain Lion doesn't external hard drives mount or stay mounted.
I have tried resetting my Mac's PRAM but the problem still remains.
Even USB memory sticks are unmounted efter a few seconds.
Anybody else with this major problem?

I have the same problem, although mine has not been solved by ESET update, finder settings, PRAM & SMC resets or anything else.
Don't get it, my external hard drive still works on both my housemates computers - one macbook pro (with snow leopard) and one dell, just not on mine with mountain lion.
Any ideas for me guys?

WD Legacy External Hard Drive "Draws too much power from USB"

I have a nice MacBook Pro running Leopard, a year or so old and I've never had any issues with it. I used a WD Legacy 250GB External Hard Drive for Time Machine to back up all my stuff. It has its own power source, and the USB cable works fine because I use it with my printer all the time. However, even with both the laptop and the hard drive plugged in, my laptop automatically disconnects the hard drive because the "USB is drawing too much power".
It didn't happen when I initially backed stuff up on it, and it plugs in and works fine with a desktop. Is there any way to disable the automatic disconnect for drawing too much power through a USB? I don't understand how that's even possible because the external hard drive has its own power source, and I just want my stuff backed up. I could care less if it ***** the charge out of my laptop for a few minutes if that means it will work. I've considered getting a powered USB HUD, but wanted to get everyone else's opinion first. Thanks!

Contact the manufacturer. I think the power pack for the drive is not functioning properly.

Satellite P75-A7200 hard drive mount connector

I am missing the hard drive mount that secures the additional hard drive on the Satellite P75-A7200.
Does anybody know where I could find this piece?

About a month ago I replaced failed 20GB hard drive in a Toshiba Satellite Pro A10 with a 40GB Samsung 2.5" Hard Drive that I bought from PC World for 45 (ordered via their website using the collect@store option). Since then the laptop has performed without problems.The only minor annoyance is that the recovery CD's formatted the new hard drive with 2 20MB partitions rather than a single one of 40MB. The main thing to check if you are not replacing drives on a like for like basis is that the power consumption of the replacement drive is no greater than that of the original otherwise you could encounter overheating problems.
The smaller (20GB and 30GB) drives originally fitted to the A10 no longer appear to be readily available. A 40GB Toshiba 2.5" hard drive is available from MISCO for around 49+delivery.
Hope this helps.
Regards John Storey

Can I add a second hard drive and if so what cable etc would I need to do so?

Can I add a second hard drive and if so what cable etc would I need to do so?
This question was solved.
View Solution.

Hi,
For many 17" (or 17.3") machines such as Envy 17, dv, Pavilion 17 .... you can add a second HDD (my old loan dv7 has two HDD's and my current loan Envy 17 also has 2 HDD's). You would need the following kit:
http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=379
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do i reformat my hard drive on mac mini late 2011 with yosemite before selling my mac

how do i reformat my hard drive on mac mini late 2011 with yosemite before selling my mac

You can't legally sell or give away that computer with Yosemite installed.
Before you sell or give away your computer, in addition to the steps listed in this support article, take these steps:
1. Run Apple Diagnostics or the Apple Hardware Test. The buyer will do this (or he should), and you don't want to be surprised by the results.
2. Reset the PRAM and the SMC, which might contain personal information.
3. If you set a firmware password, remove it by running Firmware Password Utility in Recovery mode.
4. If you activated FileVault in OS X 10.7 or later, turn it off.
5. If you use Boot Camp, the partition must be deleted.
6. If you created any other data partitions on the internal drive, remove them in Disk Utility.
7. If the machine has an internal hard drive, erase the one remaining data partition with the option to zero out data. An SSD doesn't need to be zeroed.
You can't legally or practically transfer any software downloaded from the Mac App Store to the new owner of the machine, even if it was free. That includes OS X, so if you upgraded to OS X 10.7 or later, you must reinstall an older OS, either from the installation media, if applicable, or by starting up in Internet Recovery mode (option-command-R at the startup chime.) If you installed from physical media, deliver those to the new owner.
If you're selling the machine, or donating it in working order, and it originally shipped with OS X 10.4 or 10.5, then you have the option of installing either from the discs that came with it or from a retail Snow Leopard disc (which you must then transfer to the buyer.) The buyer should understand that if he doesn't get the original discs from you, he won't get the bundled iLife applications or the Apple Hardware Test. Replacements for the original discs can be ordered from Apple.
The new owner will have to redownload any software that came from the App Store, including OS X upgrades, under his or her Apple ID. If you ever updated the bundled iLife applications (Garage Band, iMovie, and iPhoto) through the App Store, you can't transfer those either. The buyer will have to purchase them.
Remove the machine from your list of registered products. If it's still covered by an AppleCare Protection Plan, transfer the coverage to the new owner by following the instructions in the AppleCare Terms and Conditions (under the heading "Transfer of Plan.")

Can i connect thunderbolt duo hard drive to the mini display port of a late 2008 macbook pro which do not have thunderbolt port, but have mini display port.

hi, i have a late 2008 15 inch macbook pro, which have a mini display port.
I noticed that thunderbolt and mini display port looks a like. So, my question is :
can i connect thunderbolt duo hard drive to the mini display port of a late 2008 macbook pro which do not have thunderbolt port, but have mini display port.
thank you

ken94538,
no, you’d need a Thunderbolt-to-FireWire adapter or Thunderbolt-to-USB adapter to be able to access your Thunderbolt hard drive from your 2008 MacBook Pro.

I had to replace my hard drive twice in my power mac g5. Luckily, I had the foresight to install a backup drive the second time around. Has anybody had HD problems? Is it the Power Mac or I just lucked out on some bad drives.

I had to replace my hard drive twice in my power mac g5. Luckily, I had the foresight to install a backup drive the second time around. Has anybody had HD problems? Is it the Power Mac or I just lucked out on some bad drives.

Hi Leon,
There are many well known G5 problems, but being hard on Hard Drives is not one of them.
How old & what brand/model drives were they?

Where is the hard drive on hp mini 1000

where is the hard drive on hp mini 1000

Hi,
You machine can have 1 of these:
8-GB solid-state drive
16-GB solid-state drive
60-GB, 4200-rpm hard drive
and they are tricky ones in a tricky place. You can find them using the following book (pp 42 & 43 under Mass Storage Devices):
h10032.www1.hp.com/ctg/Manual/c01631228.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Unity Connection server MCS-7845-H2-ECS4 hard drives only half have power

I have 2 servers MCS-7845-H2-ECS4 which each have 8 hard drives. the 4 hard drives on the left are not powered up on either server. The last 4 hard drives all have green power lights. Is this normal operation? I thought I might have a failed controller in the first server and I ran over to check the other server, but its hard drives were exactly like the primary server. The server is running Unity Connection 7.1(5).
I checked them with the RTMT tool and I don't see any alerts about any failed hard drives or controllers. Please help

Hi there,
I believe everything is working as designed We don't
run those exact models but there is a reference here
about removing 4 HDD's (out of 8) here;
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps5745/ps6509/data_sheet_c78-491743.html
Cheers!
Rob
"Why do the best things always disappear "
- The Band

TS1550 Do external hard drives mounted on my Mac get backed up by time machine on a time capsule wireless Apple external back up disk? How can I see what folders have been actually stored in the wireless back up disk?

Do external hard drives mounted on my Mac get backed up by time machine on a time capsule wireless apple external hard disk? How can I see what folders have been actually backed up in the external wireless disk? any help would be appreciated

They can provided you remove them from the Exclude list. Normally, Time Machine does not automatically backup external drives.

External Hard Drive Mounting Issues

Hi everybody!
Problem:
My G Technologies external hard drive mounts inconsistently since the Pro Tools session I was working on today crashed. When it does manage to mount my Trash Bin on the dock fills up with trash automatically and this trash cannot be emptied.
In addition I have been unable to even open up my external hard drive on the desktop once it has mounted--I get the infinite pinwheel of death! If it does open, I'll eventually get to a folder that upon opening also brings up the pinwheel of death. Each time this happens I am forced to manually shut down my computer. Any suggestions? You help would be GREATLY appreciated! Thank you in advance.
I'm using a MacBook Pro with OSX 10.4.11 and it has a Intel Core 2 Duo processor. The ports I'm using with the external hard drive is Firewire 800.

Try booting in safe mode and emptying the trash. Try doing a Finder - Secure Empty Trash deletion....
I believe your problems are related to large files that were marked for deletion not being deleted...

Seagate 500GB Internal Hard Drive 500 GB ATA IDE +Cable

Will this HD Work on my MacBook (2 GHz, Intel Core 2 Duo)?
"Seagate 500GB Internal Hard Drive 500 GB ATA IDE +Cable"

ok I found another on eBay
"Seagate 250Gb Internal IDE Hard Drive 7200RPM"
(INFO) This is a still in the sealed package 250Gb Internal IDE 3.5", 7200RPM Seagate Hard Drive. This is a Seagate "certified repaired" HDD that was shipped to me for a return. It has never been installed nor has it ever been open. The label also indicates it is a Barracuda 7200.8.
Should this one work on my MacBook.
And thanx you for help on my first question.

Ipad mini power cable

When I plug my iPad Mini power cable into a USB hub, the hub gets a "power surge" and shuts down. What can I do?

The USB hub doesn't provide enough power to charge the iPad.
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

I have a 1st Gen Time Capsule 1tb. It turns on, boots up and turns green for 5-10 mins, but then turns solid orange and then blinks orange. I have removed the hard drive and replaced the power supply . . . still the same problem. Suggestions?

I purchased a used 1st Gen Time Capsule with a 1 tb hard drive.
When I plugged it in and did the initial setup, it worked fine, but gave me a hard drive error. A few minutes later the green light turned solid orange, then blinking orange, then the status light went off. The lights in back stayed on.
I removed the hard drive and rebooted, it turned green for 5-10 minutes then reverted back to a solid orange, blinking orange, then went off.
Next I purchased a remanufactured internal power supply, and installed it (without the hard drive in). It turned green almost immediately. After about 15-20 minutes, I decided to try to install the hard drive again, booted it up, and tried to erase the hard drive with was working properly according to the software. It stopped erasing the disc after about 20 minutes and turned solid orange again, then blinking, then no status light (but back lights were still lit).
I'm a bit flabbergasted at this point, any suggestions on what to do next? I think i've pretty much replaced everything except the logic board, but can't seem to find any information on the symptoms of a logic board malfunction.
Thanks!!!!!!!

A Gen3 is identical board to a Gen4 although they have some differences in firmware and wireless card was updated on every model.. but a Gen3 is substantially faster than Gen1, Gen2 which also have identical boards.
You can with careful shopping get a Gen3 pretty cheap.
Most use a delta power supply which I think is a lot better than the flextronics used in most Gen1/2
You can sell back the parts to ebay.. people still would buy the power supply etc. Even just the case can be useful to a repairer.
But if the board is gone.. it is hard to repair.. not impossible.. but hard.
Gen 3 and Gen 4 are not without faults.
See this page.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair/new-issue-with-a1355-gen-3-tc
I have fixed it a different way.. by using the small converters you can buy in bulk from ebay for $1 each.. KIS3R33 .. they produce 3.3V at 2A peaking at 3A.. amazing.. I keep using them to replace onboard power converters by removing the inductor and simply power directly.. the end result has worked great. You can simply change the resistors around and get any output from 1v to 20v depending on input.
Is it worth doing it .. no of course not.. it will waste many more hours than $50 is worth.. but it is kind of fun that you can actually make things work again.
Here is a pic of the Gen 3 totally powered by me. All onboard power removed.
This was to track down the fault in the Gen3.. but I am kind of pleased that it ended up neat enough and reliable enough to work for more than a year.. the Gen3 still serves as a way to get Netflix via network for a friend running 24/7.
The units supply (from left to right)
1v, 1.1v, 3.3v, 5v, 1.8v
It is feed by 12v supply which is also directly connected to the hard disk.
So it is possible to fix.. !! Only got to be a bit crazy.

RS140 - Hard Drive Mounts / SAS Mini power cables

Similar Messages

Maybe you are looking for