RS482M-IL and TERRATEC CINERGY 2400i DETECTION FAULT

Hi everybody:
I have a MSI RS482M-IL and I have bought a TERRATEC CINERGY 2400i TV CARD (1x PCIe) and I have plugged it on the PCIe 16x of the motherboard but the system does not recognize the TV CARD.
I have spoke with TERRATEC and They say that the motherboard has to recognize the TV CARD.
MSI doesn't answer me yet.
I'm not sure if the PCIe 16x of the motherboard is only for use with GRAPHIC CARD but TERRATEC has told me that in spite of this case, it should recognize the TV CARD.
Could somebody help me?
Thanks a lot

...OK...I'm not familiar with the tuner, it looks like a nice piece of equipment...I did a quick search, one site mentioned installing software first and then plugging in the card...
...that's all I got...good luck...

Similar Messages

TerraTec Cinergy Hybrid T USB XS FM - no more linux support ?

Hi,
I bought this USB tuner : TerraTec Cinergy Hybrid T USB XS FM
flo ~/src/firmware $ lsusb
Bus 001 Device 014: ID 0ccd:0072 TerraTec Electronic GmbH
The old driver support for 2.6.30 has been discontinued : http://aur.archlinux.org/packages.php?ID=26418
I tried to compile suggested v4l-dvb drivers from aur, and also from mercurial version
hg clone http://mcentral.de/hg/~mrec/em28xx-new
sh build.sh build && sudo sh build.sh install
Modules em28xx, em28xx-dvb, em28xx-alsa are correctly created.
I also installed the suggested firmware for XC3028 as suggested here.
But when I plug my device I get this :
usb 1-1: new high speed USB device using ehci_hcd and address 13
usb 1-1: configuration #1 chosen from 1 choice
and nothing else. Not device created. It is not recognized.
I tried to load the modules before plugging-in the device, with no more success, and after restarting neither.
Does someone uses this Tuner and made it work ?
Last edited by florut (2009-11-04 10:48:24)

Hi GIussepe,
Thanks for care. I actually tried to add the option card=XX (I tried many of them) but it did not work. I think card=55 does not work because Terratec hybrid XS (card 55) uses em2882 and 0ccd:0072 uses em2883.
I tried to hack using em28xx-new card mappings but it did'n work - i lack competences fort this I think.
I had some [maybe] good news on the mailing lists (which I finally manage to use!!) here.
If anyhow you get further information please let me know here!
[edit]
By the way : to use modprobe em28xx card=XX, should I do it the card unplugged and then plug it or should I do it the card plugged ?
Last edited by florut (2009-11-10 09:27:35)

I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer.

Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

Hey, my ipad is disabled and i cant open. i tried connecting it with itunes in recovery mode to restore it but it wont work it doesnt show and options itunes doesnt detect my ipad in recovery mode. what do i do know? please help!!!

Hey, my ipad is disabled and i cant open. i tried connecting it with itunes in recovery mode to restore it but it wont work it doesnt show and options itunes doesnt detect my ipad in recovery mode. what do i do know? please help!!!

If you followed these instructions and you were unable to enter recovery mode, I'm still leaning toward a hardware problem. Also, since you have IOS-7, read this. It might help.

Smartband and Lifelog does not detect jogging

Hello,
Smartband and Lifelog does not detect jogging (does not distinguish walking and jogging/running).
For example - walking with speed 5.7Km/h and treadmill running with speed 9-10 km/h.
Smartband worn on left hand.

Hi,
As I understand, lifelog log your exercise as running if the pace is 2.5 steps/ second or above.
What are your thoughts about this forum? Let us know by doing this short survey.

Hi can anybody help please. I am having terrible problems trying to use my Nikon D7100 to tether. I have downloaded the latest Lightroom updates and also checked my firmware which is also the latest avaiable and still Lightroom wont detect my camera!

Hi can anybody help please. I am having terrible problems trying to use my Nikon D7100 to tether. I have downloaded the latest Lightroom updates and also checked my firmware which is also the latest avaiable and still Lightroom wont detect my camera!. When I use a friends Canon camera it works every time!

Hi Keith thanks for your reply I have Lightroom 5.7.1 64 bit and my Nikon's firmware is version 1.02

Help!!! Itunes and Pc can't detect my Ipod Touch 4g

I tried everything that Apple Support told me to do and still can't detect my ipod touch 4g. Still stuck at apple boot logo, tried DFU mode and Recovery, still can't be detected by PC or Itunes. What to do? I need Help Badly.
When i connect my ipod, no sounds pops out but it opens and charge still stuck at boot logo.
I'm running Windows7 ultimate.
Some told me to connect it to a Mac Book, is it possible that it can be detected on a mac book? Because i only tried connectin it to other Windows PC with XP, Vista and still haven't got anything. I don't thinl it's a hardware problem cause my ipod just run low on battery and i restarted it and then It got stuck. xD

- Yes, another computer may help.
- Next try disconnecting from computer/charger and let the battery fully drain. Then charge and try again.
- Last, make an appointment at the Genius Bar of an Apple store. If defective, they will give you a replacement under your warranty.

My iPhone and iPad aren't detected by iTunes but iPod classic syncs

My iPhone and iPad aren't detected by iTunes but iPod classic syncs. I have re-installed iTunes, reset devices etc. The iPad and iPhone charges through the computer and Windows 8 recognises them.

Hi Vlismas,
Welcome to the Support Communities!
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If the issue is not resolved, you may need to uninstall iTunes and all of it's components, and reinstall the latest version as explained in this article:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
I hope this information helps ....
- Judy

HT4061 my iPhone unexpectedly shut down and now is not turning back on, charging and is not being detected by my laptop, help

my iPhone unexpectedly shut down and now is not turning back on, charging and is not being detected by my laptop, help

i put that i held down the home button and all that... sorry, should of made my message a little clearer hun.. but i did try that, ive been searching video's on the net trying to figure out how to fix the problem, but nothing seems to be working... ive just tried pluging the usb lead into my phone while holding the home button then connecting it to my computer to see if itunes fires up, but even that didnt work... i dont know what else to try.

Windows 8 and itunes can not detect itouch

I have windows 8 and itunes will not detect my itouch? Any tips?

Chris CA, I am having the same problem. I actually just purchased a brand new laptop (w/ Windows 8 already installed) and had to download itunes latest version (ver. 11) and am having the same problems. As my itunes seems compatible with my Windows 8, my itouch device can not be recognized by itunes or in the "my computer" folder.
perhaps this more of a windows 8 issue and not an itunes issue?
PS, i have OS4 on my itouch, could this be a problem as well?
Thanks!
Petit

I have Windows 7 and it is not detecting my second generation iTouch does not show

I have Windows 7 and it is not detecting my second generation iPod Touch, I have tried rebooting etc.

http://support.apple.com/kb/TS1538

Iphone 4s won't boot on and itunes doens't detect it when on battery. Plug it in and Apple logo appear then disappear, try to recover, but there's a 1602 error. Is it dead?

Iphone 4s won't boot on and itunes doens't detect it when on battery. Plug it in and Apple logo appear then disappear, try to recover, but there's a 1602 error. Is it dead?

Its weird, when I plug it into wall AC, I was able to boot into the home screen, but there's wifi cant turn on. Plug out the phone turn off immediately. I tried to jailbreak it with snowbreeze because someone has the same problem with his iphone 4, but snowbreeze doens't work with iphone 4s.

Strange issue - XI somtimes process a file and sometimes its not detected

Dear friends,
We have a strange problem. Ill describe the situation:
We have a simple file to file scenario without any mapping or File Content Conversion. Daily a sender system puts a ZIP file on a server and XI processes this file.
The strange thing is that XI sometimes processes this file and sometimes its not detected at all. After our analysis we come to conclusion that its not random.
We have looked at almost everything. We have checked the:
File name;
Size of the messages.
Authorisation;
Users that are assigned to the processing job.
Has anyone experienced the same problem or does anyone has a suggestion?
Helpful points will be rewarded,
Kind regards,
Kamran

Hi Mickael,
There are no stupid questions, there are only stupid answers. So I hope my answers are not stupid
1. what is your Polling Interval of your Sender Agreement ? Once a day ? every 60s ? etc...
because you say that your Legacy put the file Daily.
Answer: The polling Interval is 400 seconds and Modification Check is 400000 Msecs
2. Are you sure that your Legacy does not put the file after or during the XI adapter try to catch it?
Answer: No Because Modification Check works perfectly and we get alerts if the file is modify during the process.
3. Does your filename is always the same ?
4. or Have you a filename which can changed and which is case sensitve (lowercase and uppercase).
Answer: It has always the same name and It starts with O2C.zip
5. What are the size of your failed file?
Maybe it's too big and maybe you have a timeout somewhere (for instance into the adapter log)
Answer: It's not too big, it varies from 20 MB to 100 MB and we know that we can process files up to 700 MB
As I told before we have checked everything. Its very strange...
Do you have any other suggestion?
Regards,
Kamran

HT201412 I try to update IOS 6 to my ipad 2 and after half of the procedure stopped ... then I try to reconnected to the itunes and say "iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes". Can every

I try to update IOS 6 to my ipad 2/ wf/3g and after about half of the procedure stopped ... then I try to reconnected to the itunes and say "iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes". Can everyone help please. In the screen of iPad appears the itunes Logo and the cable of connectios. Can't do nothing!!!

Click restore in itunes.

I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up. Clicking on 'repair catalog' does not work either. Any suggestions?

I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up. Clicking on 'repair catalog' does not work either. Any suggestions?

I'll have to get a better instructor on deleting the preferences since when I've doen it in the past nothing is there when I open LR the catalog is gone. I assumed that was what was supposed to happen so I start importing all over again. But that is a different issue...
The problem has been happening since at least the beta of 3 came out and I saw other posts back then saying they had similar issues but I assume it was a beta thing... But since the full version came out and through each incremental change I haven't seen an improvement. If anything it has gotten a little worse with time.
I have to try to be careful to not be in a hurry and start clicking around in the catalog as it seems fragile until it has cataloged all the photos in the library. When starting you will see the numbers populate the folders very slowly and I try not to click on a folder that hasn't had the number of photos pop up yet. Also draging the slider down to see more of the cataloge can have the same affect and crash the system.
I wish I had more to go on.. I believe it may be a resources issue but as I went from 3-4 Gig I thought it would get better. I don't have big programs running but did have outlook and word running in the background along with firefox and chrome.
And yes it only happens on this HP desktop (it's 2+ yrs old) and may be showing it's age a bit. My laptop which has less resources doesn't have the issue.. I have them sharing the catalog. (not at the same time) just when I'm working in other places in the house.
Jeff

RS482M-IL and TERRATEC CINERGY 2400i DETECTION FAULT

Similar Messages

Maybe you are looking for