RS482M4 + XP SP2 + RADEON X550 - Sudden freezes everytime with the Radeon X550

Hi, my computer is MSI motherboard RS482M4 (939 socket) with cpu AMD Athlon 64bit 3200+, (2) ddr 3200 256mb x 2= 512MB CORSAIR, power 450 watts, video card RADEON X550 256MB PCI-EXPRESS. when i install the windows xp sp2 everything is ok, after the instalation is done, some device are unknow for the Windows xp, of course, then when i install all drivers including the video card RADEON X550 all the system is freeze, i think that, after the instalation of video card RADEON X550 drivers all the system is unestable. i put off the video card radeon x550 and the system is ok. everything is ok.
the questions are:
1) incompatibility with RAM?
2) Incompatibility with RADEON X550 and the motherboard?
3) incompatibility with CPU Athlon 64 bit 3200+?
4) The bios is older (AMI V1.2)?
5) all the previous items
Thanks for your help...
PD.: i sorry for my english, i speak spanish.. (for your information: in my country Venezuela we have a no democratic president. he is like a angel but, inside he is a devil... and totalitary).
when i uninstall the radeon x550 the system works with the radeon x200. it is by default video card, charing 64 mb ram of the main memory. here the system works fine.
Leonardo Boscán

Quote from: ici on 11-April-06, 12:14:01
I think what I understood is the banging the head on the wall. Not sure about the rest.
Never heard of Omega, any chance for a link to there website?
ok, i going to explain you
the Power Source Unit PSU have the following configuration:
mark: OMEGA 480ATX
Output 480w
the color wiring and capacity
+3.3V 30Amp (orange)
+5V 38Amp (red)
+12V 22Amp (yellow)
+5 VSB 2Amp (purple)
-5 V 0.5 Amp (white)
-12 1.0Amp (blue)
PS-ON (green)
PG- (Grey)
+5V and 3.3V combined load max 250W
i tried with another case with another PSU and another ram memory kingston 1 gb and..... nothing.... all the system FREEZE after 3 or 5 minutes of use.
i figured that whe install the drivers of the X550 the system is unestable.
i am thinking reclaim for waranty the X550 video card or the motherboard or CPU or memory. the question is: which one is wrong or bad????. there is the question..

Similar Messages

HT203175 While trying to use my iTunes library it will suddenly stop working with the erro message Runtime error R6025 pure virtual function call. HELP!!!

While trying to use my iTunes library it will suddenly stop working with the error message Runtime error R6025 pure virtual function call.
Help???

Just responded to this in another thread (note we used Captivate 7 so it might be a different error).
We found that when we created files with embedded swf files that existed ABOVE widgets in the timeline, when someone else tried to open our file it broke/we got the runtime error. The original person could still open it for a time, but eventually the cache would clear and they couldn't.
However, if we ensured swf files are BELOW widgets in the source files, it didn't break. In fact, if we found one that was breaking and got the author to move the swf file on the timeline, it would start working for others.
STRANGE! Let me know if this works for you to!

ITunes Seem to Have Suddenly Stopped Communicating With the CD/DVD Burner

Hello, I wonder if anybody can help - my itunes application seems to have suddenly stopped communicating with my laptop's cd/dvd burner
(Generic Name (E: H - T-S D D A S - 20N ATA Device)).
About 2 years ago, I have experienced a similar problem, but was able to resolve it by downloading 64-bit compatible GEAR drivers to my system. However, the problem has re-appeared when I have updated to iTunes Version 10.1. Funny enough, the cd/dvd burner started getting recognized again when I updated to iTunes Version 10.2, but halfway through me burning a large playlist to multiple cds has suddenly stopped recognizing the cd/dvd burner again, and has never "resolved itself" ever since.
I have tried multiple approaches to solving this issue, including completely re-installing itunes software and completely re-installing GEAR drivers, but nothing works. I have even tried uninstalling GEAR drivers completely, as I read that it worked for someone on one of the similar forums, but that didn't work either.
My itunes diagnostics runs all the points of the cd/dvd drive check successfully, except for the last point (Can Not Read Audio CD). Here's what the diagnostics summary looks like:
Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 2 (Build 6002)
Hewlett-Packard HP Pavilion dv9700 Notebook PC
iTunes 10.2.1.1
QuickTime 7.6.9
FairPlay 1.11.16
Apple Application Support 1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Driver not found.
Bonjour 2.0.4.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0016AB580A7B0C28
Current user is not an administrator.
The current local date and time is 2011-04-14 17:52:25.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 7150M / nForce 630M
** External Plug-ins Information **
No external plug-ins installed.
The drive F: Motorola MB810 Rev 0001 is a USB 2 device.
iPodService 10.2.1.1 (x64) is currently running.
iTunesHelper 10.2.1.1 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
** CD/DVD Drive Tests **
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: H-T-S DDA
S_-20N, Rev W_05
Audio CD in drive.
Found 1 songs on CD, playing time 255:08 on Audio CD.
Track 1, start time 00:02:00
Audio CD reading failed. Error Code: 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 0 0 0 0.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed succeeded.
The drive CDR speeds are: 3 9 16 24.
The drive CDRW speeds are: 3.
The drive DVDR speeds are: 3.
The drive DVDRW speeds are: 3.
Error Correction is turned on for importing audio CDs.
I have noticed that the diagnostics summary containes a suggestion to update firmware of my laptop's cd/dvd drive, but currently there are no such firmware updates available.
Another frustrating issue that I ran into was trying to convey this issue to Apple Technical Support via e-mail using the Express Lane for the troubleshooting issues. I really fail to understand why I am being asked for the "hardware serial number" when I'm clearly choosing the categories for "iTunes/CD-DVD Import Issues" which are software, not hardware, categories! This prevents me from being able to simply send the description of my problem to the correct Apple Support department, and does not let me do that even when I enter my itunes' Serial Number, which can be found in the diagnostics summary provided above.
Much Thanks to anyone who can provide any kind of helpful advice, even if it's just on how to be able to convey this problem to Apple Support via e-mail!

Okay ... checking something else:
Current user is not an administrator
Is that true? Or do you in fact have a Windows user account with full administrative rights?
(It's possible that a permission may have gone astray in your usual user account, which might be causing the burning issues.)

Do I have to have SP2 or can I use SP1 with the X

My Gaming Rig is I guess outdated to many of you:
P4c800E-Deluxe
P4 3.2
gig 3200
EVGA 6800 Ultra
*SB LIVE 5. Platinum
I know many of you here can tell that my 5. is causing me some issues.
It is. In fact my rig plays all the new games great with the exception of
audio. I feel that my 5. is causing me some if not all of the glitching and stuttering
Im getting is say FEAR for example. I just go SIN Emergence and I have serious
audio glitches.
So I came to the this forum to check out what people were saying about the new Platinum
cards. I had no idea of what I have been reading. I am a big ASUS fan for years now. After now well over a year of serious troubleshooting and analysis I am positi've that I must get a new Sound card Directx 9 compliant EAX 3+ and more.
BUT like most gamers none of us want or use SP in XP.
Will the X-FI Platinum or Fatality install and work if I just have SP?
Id really appreciate any assitance. Since my system is older it the X-FI might not suffer from some of the issues I am reading about. I am hoping so. But I will not go to SP2 and if I put the card in and load the drivers CD and it says you need SP2 I have wasted my money.
Thanks

If home sharing is setup and you have an IOS device that is on the same network you can download the remote app. Otherwise, you will need to purchase a new remote.

Can you freeze frame with the imovie app. and save the freeze frame to a picture

Can I freeze frame on the iMovie app and turn the freeze frame into a picture?

Experiencing the same issue. Fired up iMovie for the first time today and created 2 movies. The first was 35 seconds long and the 2nd was 1 min 45 seconds long. Got all my pics loaded up and added a song from my personal collection. Plays perfectly from the phone. The problem occured when I tried to export the larger movie. The first time I tried, it sat at the exporting movie status bar (without moving) and then closed the app. After relaunching the app, it told me that my audio file had been removed from the phone. After closing and re-opening the iMovie app again, my movie project played fine through the app but as soon as I tried to export again it rebooted my phone. I tried exporting on all 3 size options (Medium, Large, HD) and it did not matter. I tried multiple songs thinking perhaps that was my issue, but each one did the same thing. I tried the lock-screen time-out fix but that didn't help either. I have no problems exporting my smaller movie file (35 seconds)using any of the export sizes. This leads me to believe that the issue is soley related to the length of the project...or perhaps the number objects located in the project. In either case, it's definitely an app issue. I do love the app though...when it works.

Anyone else having freezing issues with the new photo app on yosemite?

Whenever i send a pic or video directly from photos....it kinda freezes and won't let you do much more. I have to force quit every time

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

My icloud address and calendar on my iphone suddenly stopped communicating with the icloud screens on Outlook. How do i fix it?

My iPhone 4S was communicating fine with Outlook 2007 (Windows 7), and then suddenly stopped communicating. Now if I add or change a Contacts or Calendar item in iCould, either on my iPhone or on Outlook, the change does not show up on the other. How can I fix this?

Sorry, I meant iCloud, not iCould. Actually, I couldn't

Suddenly Firefox starts with the last page viewed.

I'm running Firefox 24.0 on Windows 7. Suddenly when I start Firefox I wind up on the last page viewed, tabs and all. I went to Options, set it to blank. Went to about:config and made the change there. No luck.
I'm not certain, but I think this started with this week's Microsoft download.

You can check if you have an user.js file in the Firefox profile folder that sets the browser.sessionstore.resume_session_once pref to true.
*http://kb.mozillazine.org/browser.sessionstore.resume_session_once
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Preferences_not_saved

Does the 10.6.4 update fix the freezing issues with the i5 & i7 MBP's

Since I am on the fence about buying a new 15" MBP I would be interested to know what effect the new update has on the latest MBP's and the freezing issues some are experiencing.

The "freezes" that are mentioned in other threads here appear to be due to a wide variety of different issues. Looking at the relevant posts I'd reckon about one in thirty of them at the most are due to an unusual issue with a few of the current MBPs. The other 29 are simply the regular array of things that cause freezes on any computer - out of date software, corrupted directory structures, the migration of already corrupted software from older computers, duplicate or corrupted fonts, badly written third party software, the occasional shonky HD or RAM module, etc etc etc.
THis is a non-issue from what I can see. Some people may well benefit from updating to 10.6.4 , but probably only because it replaces some files that have been corrupted for other reasons in the past.
I certainly wouldn't be putting off getting a new MBP on the basis of the stuff here. Sure, some people will experience "freezes", but there doesn't really seem to me to be anything out of the ordinary being reported here with respect to the new MBPs. There are a thousand and one things that can lead to "freezes". In a few cases it probably is due to a hardware problem with one component or another. In the vast majority, however, it will simply be because of the common old "thousand and one shocks that silicon chips, magnetic storage and software developers are heir too"!
Cheers
Rod

Forms autocomplete has suddenly ceased working with the lastest upgrade

Resolved by restart of Firefox

Ask in the DW forum and be much more specific about the requirements for your FTP connection like its ports, TLS settings and so on.
Mylenium

Does anyone else all the sudden have probs with the ipod touch calendar?? all the sudden can't add dates to mine, please help!

Can't insert new events into my calendar...was fine before the new software update but now doesn't work. please help if you know any fixes.

Go to Settingds>iCloud and make sure that Calender is turned on. If yo want to do other things too like adding contacts, make sure those are also turned on.

My 3 month old iPad is suddenly not charging with the adapter

Hi, this feels like a dumb question but when i plug my iPad into the 10W adapter directly into a wall outlet, the message 'not charging' appears next to the battery percentage. What am I doing wrong? It's charged with the adapter before but now all i get is that message. thanks for any help you can provide! Jeannie

Thanks everyone! I decided to leave it plugged in and it seems to be charging but it still says 'not charging' in the top right corner next to the battery percentage. It seems to be charging slower than usual though. It was at 44% around 10am and at 2 pm it's at 66%. I don't see the lightning bolt through the battery icon like I normally would. what would cause that? I really appreciate all of your help! Jeannie

My macbook pro suddenly freezes; screen turns off and computer freezes. Have to hard restart. Error message appears upon restart, saying something about kernel, etc. Can anyone please help on this issue?

For the past month or more I've encountered what I consider to be quite a serios problem with my Macbook pro. The laptop suddenly freezes without warning, the screen turns black, while the hard drive apparently stals and the system no longer responds. The only way to resolve this issues is to restart the computer via a hard reset. After restarting, an error message box shows up asking me to report the error, which I've already done on numerous occassions. The problem occurs at a frequency of 1 every 2-3 days, sometimes more often than that. The error message that comes up is very complicated but contains some key words amongst which includes "kernel." This makes me believe that it's an issue with the video card, and was wondering how I can remediate this problem so as to get the normal function of my laptop back. If anyone can be of any help, I would greatly appreciate it.
Andrei

For the past month or more I've encountered what I consider to be quite a serios problem with my Macbook pro. The laptop suddenly freezes without warning, the screen turns black, while the hard drive apparently stals and the system no longer responds. The only way to resolve this issues is to restart the computer via a hard reset. After restarting, an error message box shows up asking me to report the error, which I've already done on numerous occassions. The problem occurs at a frequency of 1 every 2-3 days, sometimes more often than that. The error message that comes up is very complicated but contains some key words amongst which includes "kernel." This makes me believe that it's an issue with the video card, and was wondering how I can remediate this problem so as to get the normal function of my laptop back. If anyone can be of any help, I would greatly appreciate it.
Andrei

Sudden FREEZING issues!

As of today, my macbook keeps suddenly freezing up. The mouse won't move, none of the hot keys work, and when it did momentarily unfreeze, it wouldn't even restart properly because it froze up mid-process. Why is it doing this?? I know I need to bring it into a genius but with it being a holiday weekend, I don't foresee having the time to do so. I've been backing it up too and I know there is plenty of memory still so what gives??

Hello
Based on your description, I had a very similar experience with my old iBook G4. How's the battery life on your Mac? On my iBook, I noted that I had far far fewer freezing issues when it was powered from the mains. This was confirmed by the fact that my Mac was completely dropping dead while on battery.
Alternatively, check your RAM is seated properly and that it isn't going bad (Rember is a good app for this). Likewise, check your HD isn't about to go bad (I use the freeware app Onyx).
Failing that, go see the Genius...! I'd be interested to know what Apple thinks the issue is.
Regards and good luck
Gareth Wells
Message was edited by: GarethJWells

Macbook pro late 13 frequent hard freezes with the rainbow wheel

Ive been getting this issue on my macbook quite frequently now; dont think its hardware related and occurs randomly at any time up to 3 times a day where the computer will slowly begin to freeze.
It (usually) begins by my browser not being able to access a website (just a white screen in browser section), at this point im able to alt tab between apps for some time but eventually everything will hard freeze, same with the cursor which will turn into a rainbow wheel and also eventually freeze.
Can only resolve this by power button for 6 secs (good thing it starts up in 5 seconds)
Any help?? Kind of new to macs Thanks!
MacBook Pro
Retina, 13-inch, Late 2013
Processor 2.4 GHz Intel Core i5
Memory 8 GB 1600 MHz DDR3
Software OS X 10.9.3 (13D65)

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract—not at the end.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent of each. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

RS482M4 + XP SP2 + RADEON X550 - Sudden freezes everytime with the Radeon X550

Similar Messages

Maybe you are looking for