RSA1 Dump
Hi,
I Have an abap short dump ASSERTION_FAILED CL_RSAWBN_TREE_VIEW===========CP when I call transaction rsa1.
the short dump showed after executing program UJS_activate_content. ( to install ENVIRONMENTSHELL)
My configuration is : SAP BW 740 SP02 ON HANA.
BI CONTENT 747 SP07
CPMBPC 801 SP05
HANABPC SP00
Can any one help me it is very critical?
Best Regards,
RAFIK,
Hi,
I reposted it but I think it is also an SAP BW on hana Problem.
RAFIK,
Similar Messages
-
Short Dump While Accessing RSA1 in BI7.0 with SP 21
Hi,
The following short dump occurs, while Accessing RSA1 in BI7.0
Runtime Errors SYNTAX_ERROR
Date and Time 26.10.2010 10:19:35
Short text
Syntax error in program "CL_RSTRAN_STAT================CP ".
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_RSAWBN_OBJ_TRFN============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_RSTRAN_STAT================CP " in include
"CL_RSTRAN_STAT================CM00X " in
line 34:
"Der formale Parameter "E_TLOGO_MASK" existiert nicht."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "CL_RSAWBN_OBJ_TRFN============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "CL_RSTRAN_STAT================CP
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program
CL_RSTRAN_STAT================CP :
"Der formale Parameter "E_TLOGO_MASK" existiert nicht."
i.e parameter E_TLOGO_MASK is not existing.
I have gone through below old thread, but its for old SP
Runtime Error SYNTAX_ERROR while accessing the T-code RSA1
In our case, I guess it refers to our patch level as this SAP Note is referring to support package 17,
but we have implemented support package 21.
Please help <REMOVED_BY_MODERATOR> as this is blocking our next level in BI upgrade process.
Thanks in advance.
Regards,
Manikandan Dhanakoti
Edited by: Manikandan.D on Oct 29, 2010 8:37 AM
Edited by: Pravender on Nov 1, 2010 12:30 PMSee if below threat is any help.
Runtime Error SYNTAX_ERROR while accessing the T-code RSA1 -
Dump While uploading the data in RSA1 from R3 system
Hi All,
We are getting a dump in st22 while uploading the data in RSA1,pls find the details below-:
Error analysis
Short text of error message:
Password logon no longer possible - too many faile d attempts
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "Password logon no longer possible - too many faile"
Variable 2.......... "d attempts"
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLRSSM" or "LRSSMU17"
"RSSM_CALL_RSAR_DATA_REQUEST_1"
I have checked both R3 and BI system there is no user which is currently locked.
also I have checked the SAP Notes 1088927,1066180 ,these notes recommends to upgrade the SAP_BW component to 16 level but we are already running at 18.
Pls suggest
Regards,
PrashantHi Prashant
Your system user is unable to authenticate access on the remote system. This may be an issue for RFC user locking. Check the RFC from SM59 for the commection between the two systems. Check for the User ID and password that is saved on the RFC logon.
Also check the system user ALEREMOTE.
I hope this helps
Regards
Chen -
RSA1 - Datasources ASSERTION_FAILED short dump
Hello,
We are getting a short dump (ASSERTION_FAILED) when clicking on Datasources tab in RSA1 -> Modeling. This was working fine till yesterday afternoon. The last action I performed was to activate all transfer structures in My self source system using RS_TRANSU_ACTIVATE_ALL. I searched on service marketplace but couldn't find any note relevant to our error.
Everything else works fine. Please advise.
We are on BI SP14.
This is the log from st22.
Short text
The ASSERT condition was violated.
What happened?
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
Error analysis
The following checkpoint group was used: "No checkpoint group specified"
If in the ASSERT statement the addition FIELDS was used, you can find
the content of the first 8 specified fields in the following overview:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"ASSERTION_FAILED" " "
"CL_RSAWBN_TREE_VIEW===========CP" or "CL_RSAWBN_TREE_VIEW===========CM00K"
"EXPAND_NODE"
Best Regards
RT
nullHello Voodi,
998730 talks about the short dump when changing/activating transformations.
We got the short dump when trying to get into Datasources tab. Though we are on BI, as i mentioned earlier the last action i performed was to activate transfer structures (For 3.x statistical datasources).
Still, I checked the table contents as mentioned in the note. It was not of much help. Any other thoughts?
Thanks.
Message was edited by:
SAPBI IP -
Hi,
When I am trying to open RSA1 I am getting the following dump,what has to be done to resolve this
Runtime Errors MESSAGE_TYPE_X
Date and Time 23.12.2006 10:16:22
ShrtText
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Control Framework : Error processing control
Technical information about the message:
Diagnosis
An error occurred when the system tried to process the commands
from the Automation Queue on the presentation server.
There are several possible reasons for this:
- The installation of the SAP GUI on the presentation server is
faulty or obsolete.
- There is an error in the application program
- There is an error in the SAPGUI or an integrated control
Procedure
1. Make sure that you have imported the appropriate Support
Package, the current kernel, and GUI patch for the release of your
system
2. Check whether the error occurs locally on one or a few PCs, or
generally on all PCs. Note whether the error only occurs for some
users, for example because of a specific Customizing setting.
If it only occurs locally, this suggests an installation problem
with the PC. Check the installation; if necessary, reinstall the
software. In the dump, search for the SY-MSGLI field, since it may
point to the cause of the error.
3. Activate the Automation Trace (in accordance with SAP Note
158985).
4.Start the transaction and continue until the screen immediately
before the dump.
5. From the System -> Utilities menu, choose Autom. Queue,
Synchronous Processing.
The status bar of the GUI displays the text:
"Automation synchron flush mode on"
6. If you now proceed with the application, the short dump will
display the ABAP call that caused the error; the Automation Trace
will contain the error on the presentation server.
7. If necessary, load the short dump and trace files on to
sapservX, so that SAP can analyze them.
Message classe...... "CNDP"
Number.............. 006
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
Variable 4.......... " "
Trigger Location of Runtime Error
Program CL_GUI_CFW====================CP
Include CL_GUI_CFW====================CM002
Row 23
Module type (METHOD)
Module Name FLUSH
Source Code Extract
Line
SourceCde
1
2
METHOD FLUSH .
3
4
data: rc like sy-subrc, msgli like sy-msgli.
5
6
CALL FUNCTION 'AC_FLUSH_CALL'
7
EXPORTING
8
SYSTEM_FLUSH = ' '
9
IMPORTING
10
MESSAGE_NR = rc
11
MESSAGE_TEXT = msgli.
12
13
sy-subrc = rc.
14
sy-msgli = msgli.
15
16
CASE SY-SUBRC.
17
WHEN 0.
18
WHEN 1.
19
system_error
20
MESSAGE ID 'CNDP' TYPE 'X' NUMBER 007 RAISING CNTL_SYSTEM_ERROR.
21
WHEN 2.
22
method_call_error
>>>>>
MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
24
WHEN 3.
25
property_set_error
26
MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
27
WHEN 4.
28
property_get_error
29
MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
30
WHEN OTHERS.
31
RAISE CNTL_ERROR.
32
ENDCASE.
33
ENDMETHOD.
Regards,
MayaProbably ur Tcode RSA1 is locked in something which causes a dump.
What u can do is try RSA11 or RSA12.
Regards -
While loading the data in transaction RSA1 we are getting dump in SCM 5.1
Hi,
I am getting runtime error while loading the data in transaction RSA1.
Runtime error is GETWA_NOT_ASSIGNED associated with program /SAPAPO/CL_PDEM_WORKDAYS.
Please help me out with this.Hi Rahul,
Check whether sap note 482494 can be applicable to you. -
BCS Short Dumps after Upgrade (3.5 to BI7)
Hi SDN,
We have recently upgraded our dev system from BW3.5 to BW 7 (SEM BW 6) and following the upgrade none of the queries based on the BCS virtual info provider(Remote Cube) ZVBCS01 are working or the listcube transaction on cube ZVBCS01 in RSA1.
Both the queries and listcube short dump with DATREF_NOT_ASSIGNED (Details "DATREF_NOT_ASSIGNED" "SAPLUCR0" "LUCR0U08" "PROVIDE_SEM_DATA_TABLE_3")
We have raised a call with SAP OSS they recommended to activate the InfoObject 0BCS_REPMOD from business content and regenerate the data basis. We did all this but still experience the short dumps. (We havenu2019t assigned 0BCS_REPMOD to any Infoproviders or the data basis)
We will be unable to upgrade to BI7 unless we can resolve this issue so any help would be appreciated.
Kind regards,
Jamie FlaxmanThanks for the responses, we have managed to get BCS working now following the upgrade.
Following the activation of the business content, I had to regen the Data Basis but the way I did it originally wasnu2019t enough to force a regeneration. So I had to make a small change to the data basis (move of field names and back again) which was enough to do the re-gen.
We have experienced quite a few issues with the upgrade from SEM 4 to 6.
Thanks for the help.
Jamie Flaxman -
Short Dump error while loading data from R/3 to ODS
Hello,
while trying to load data into the ODS from R/3 I get the following short dump error message. How do I carry out step 1 in the below procedure. Where do i find the Activate Function. And idea?
Thanks,
SD
Diagnosis
Form routine CONVERT_ITAB_RFC is incorrect in transfer program
GP4C0LOLZ6OQ70V8JR365GWNW3K .
System Response
The IDoc processing was terminated and indicated as incorrect. The IDoc
can be reimported at any time.
Procedure
1. Go to the transfer rule maintenance for your InfoSource
ZFIN_TR_FLQITEM_FI and the source system DA_M_10 and regenerate the
transfer program using the function Activate. Remove possible syntax
errors on the basis of your conversion routines.
2. Restart the processing of this IDoc.
3. If the error occurs again search for SAPNet R/3 notes, and create a
problem message if necessary.
Edited by: Sebastian D'Souza on Jan 13, 2009 3:22 PMHi.......
Goto RSA1>> then to source system tab (on left side) >> double click on the desired source system...........Then on the right side you have the Datasource tree..........there search the datasource and activate.......Also u can Replicate the datasource again.......and activate the Transfer rules using the program : RS_TRANSTRU_ACTIVATE_ALL
After this operation when come back to source system (R/3).........I think the error log line will be disappeared from SM58......... Then repeat the load.........
Also u can try to Activate the infosource once...........in RSA1.........before repeating the load....
Hope this helps......
Regards,
Debjani.... -
Hi All,
In process chain, While executing DTP( from PSA to ZINFOOBJECT-Master data), I am getting the following ABAP Dump:
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
The internal table "???" could not be further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 5356
Number of rows: 0
Allocated rows: 138348
Newly requested rows: 2 (in 69173 blocks)
How to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 416432
Extended memory (EM)........... 2002720576
Assigned memory (HEAP)......... 1999932640
Short area..................... " "
Paging area.................... 24576
Maximum address space.......... 4294967295
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"SAPLRSSTATMAN" or "LRSSTATMANU12"
"RSSTATMAN_UPDATE_DATASTATE_EXT"
Could any one suggest solution
Thanks and Regards,
Umakanth JalduHi Ramanm
Please suggest how to do repair custom info object in RSRV and the info object is loading from two different dtps and both dtps are failing because of same error.The process of DTP is showing but not moving to next process type.
Dump:
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time 31.03.2015 22:19:53
|Short text |
| No more storage space available for extending an internal table. |
|What happened? |
| You attempted to extend an internal table, but the required space was |
| not available. |
|What can you do? |
| Note which actions and input led to the error. |
| |
| For further help in handling the problem, contact your SAP administrator |
| . |
| |
| You can use the ABAP dump analysis transaction ST22 to view and manage |
| termination messages, in particular for long term reference. |
| |
| Try to find out (e.g. by targetted data selection) whether the |
| transaction will run with less main memory. |
| |
| If there is a temporary bottleneck, execute the transaction again. |
| - |
| |
| If the error persists, ask your system administrator to check the |
| following profile parameters: |
| |
| o ztta/roll_area (1.000.000 - 15.000.000) |
| Classic roll area per user and internal mode |
| usual amount of roll area per user and internal mode |
| o ztta/roll_extension (10.000.000 - 500.000.000) |
| Amount of memory per user in extended memory (EM) |
| o abap/heap_area_total (100.000.000 - 1.500.000.000) |
| Amount of memory (malloc) for all users of an application |
| server. If several background processes are running on |
| one server, temporary bottlenecks may occur. |
| Of course, the amount of memory (in bytes) must also be |
| available on the machine (main memory or file system swap). |
| Caution: |
| The operating system must be set up so that there is also |
| enough memory for each process. Usually, the maximum address |
| space is too small. |
| Ask your hardware manufacturer or your competence center |
| about this. |
| In this case, consult your hardware vendor |
| abap/heap_area_dia: (10.000.000 - 1.000.000.000) |
| Restriction of memory allocated to the heap with malloc |
| for each dialog process. |
| Parameters for background processes: |
| abap/heap_area_nondia: (10.000.000 - 1.000.000.000) |
| Restriction of memory allocated to the heap with malloc |
| for each background process. |
| Other memory-relevant parameters are: |
| em/initial_size_MB: (35-1200) |
| Extended memory area from which all users of an |
| application server can satisfy their memory requirement. |
|Error analysis |
| The internal table "???" could not be further extended. To enable |
| error handling, the table had to be delete before this log was written. |
| As a result, the table is displayed further down or, if you branch to |
| the ABAP Debugger, with 0 rows. |
| |
| At the time of the termination, the following data was determined for |
| the relevant internal table: |
| |
| Memory location: "Session memory" |
| Row width: 5356 |
| Number of rows: 0 |
| Allocated rows: 138348 |
| Newly requested rows: 2 (in 69173 blocks) |
|How to correct the error |
| The amount of storage space (in bytes) filled at termination time was: |
| |
| Roll area...................... 416432 |
| Extended memory (EM)........... 2002720576 |
| Assigned memory (HEAP)......... 1999932640 |
| Short area..................... " " |
| Paging area.................... 24576 |
| Maximum address space.......... 4294967295 |
| |
| If the error occures in a non-modified SAP program, you may be able to |
| find an interim solution in an SAP Note. |
| If you have access to SAP Notes, carry out a search with the following |
| keywords: |
| |
| "TSV_TNEW_PAGE_ALLOC_FAILED" " " |
| "SAPLRSSTATMAN" or "LRSSTATMANU12" |
| "RSSTATMAN_UPDATE_DATASTATE_EXT" |
| |
| If you cannot solve the problem yourself and want to send an error |
| notification to SAP, include the following information: |
| |
| 1. The description of the current problem (short dump) |
| |
| To save the description, choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 2. Corresponding system log |
| |
| Display the system log by calling transaction SM21. |
| Restrict the time interval to 10 minutes before and five minutes |
| after the short dump. Then choose "System->List->Save->Local File |
| (Unconverted)". |
| |
| 3. If the problem occurs in a problem of your own or a modified SAP |
| program: The source code of the program |
| In the editor, choose "Utilities->More |
| Utilities->Upload/Download->Download". |
| |
| 4. Details about the conditions under which the error occurred or which |
| actions and input led to the error. |
| |
|System environment |
| SAP-Release 701 |
| |
| Application server... "sapXXXa1" |
| Network address...... "10.10.29.72" |
| Operating system..... "AIX" |
| Release.............. "7.1" |
| Hardware type........ "00CB77444C00" |
| Character length.... 16 Bits |
| Pointer length....... 64 Bits |
| Work process number.. 4 |
| Shortdump setting.... "full" |
| |
| Database server... "sXXX341.sac.XXX" |
| Database type..... "ORACLE" |
| Database name..... "XXX" |
| Database user ID.. "SAPSR3" |
| |
| Terminal.......... "GSSM0510" |
| |
| Char.set.... "C" |
| |
| SAP kernel....... 720 |
| created (date)... "Feb 10 2014 21:43:58" |
| create on........ "AIX 2 5 00092901D600" |
| Database version. "OCI_102, 11.2.0.2.0, V1, default" |
| |
| Patch level. 525 |
| Patch text.. " " |
| |
| Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*" |
| SAP database version. 720 |
| Operating system..... "AIX 2 5, AIX 3 5, AIX 1 6, AIX 1 7" |
| |
| Memory consumption |
| Roll.... 416432 |
| EM...... 2002720576 |
| Heap.... 1999932640 |
| Page.... 24576 |
| MM Used. 3938002576 |
| MM Free. 59192960 |
|User and Transaction |
| Client.............. 100 |
| User................ "XXXX" |
| Language Key........ "E" |
| Transaction......... " " |
| Transactions ID..... "551B198729F80700E10080000A0A1D12" |
| |
| Program............. "SAPLRSSTATMAN" |
| Screen.............. "SAPLRSBM_REQUEST_GUI 0300" |
| Screen Line......... 5 |
| |
| Information on caller of Remote Function Call (RFC): |
| System.............. "XXX" |
| Database Release.... 701 |
| Kernel Release...... 720 |
| Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.) |
| Call Type........... "synchronous and non-transactional (emode 0, imode 0)" |
| Inbound TID.........." " |
| Inbound Queue Name..." " |
| Outbound TID........." " |
| Outbound Queue Name.." " |
| |
| Client.............. 100 |
| User................ "XXXX" |
| Transaction......... "RSA1" |
| Call Program........."SAPLRSM1" |
| Function Module..... "RSS2_CALL_FCODE_EMPTY_GLOBALS" |
| Call Destination.... "NONE" |
| Source Server....... "sapXXXa1_XXX_12" |
| Source IP Address... "10.10.29.72" |
| |
| Additional information on RFC logon: |
| Trusted Relationship " " |
| Logon Return Code... 0 |
| Trusted Return Code. 0 |
| |
| Note: For releases < 4.0, information on the RFC caller are often |
| only partially available. |
|Information on where terminated |
| Termination occurred in the ABAP program "SAPLRSSTATMAN" - in |
| "RSSTATMAN_UPDATE_DATASTATE_EXT". |
| The main program was "SAPMSSY1 ". |
| |
| In the source code you have the termination point in line 306 |
| of the (Include) program "LRSSTATMANU12". |
|Source Code Extract |
|Line |SourceCde |
| 276| l_s_ext_db-records_techok <> l_s_ext-records_techok. |
| 277| l_s_ext-ts_tech_changed = l_timestamp. |
| 278| l_s_ext-ts_data_changed = l_timestamp. |
| 279| l_changed = 'X'. |
| 280| else. |
| 281| l_s_ext-ts_tech_changed = l_s_ext_db-ts_tech_changed. |
| 282| endif. |
| 283| if l_s_ext-requests_techok = 0. |
| 284| clear l_s_ext-ts_tech_changed. |
| 285| endif. |
| 286| |
| 287| if l_s_ext_db-requests_error <> l_s_ext-requests_error or |
| 288| l_s_ext_db-records_error <> l_s_ext-records_error. |
| 289| l_s_ext-ts_error_changed = l_timestamp. |
| 290| l_s_ext-ts_data_changed = l_timestamp. |
| 291| l_changed = 'X'. |
| 292| else. |
| 293| l_s_ext-ts_error_changed = l_s_ext_db-ts_error_changed. |
| 294| endif. |
| 295| if l_s_ext-requests_error = 0. |
| 296| clear l_s_ext-ts_error_changed. |
| 297| endif. |
| 298| |
| 299| if l_s_ext_db-requests_all <> l_s_ext-requests_all or |
| 300| l_s_ext_db-records_all <> l_s_ext-records_all. |
| 301| l_s_ext-ts_data_changed = l_timestamp. |
| 302| l_changed = 'X'. |
| 303| endif. |
| 304| |
| 305| l_t_part[] = i_t_part[]. |
|>>>>>| sort l_t_part by timestamp_verb descending. |
| 307| read table l_t_part into l_s_part index 1. |
| 308| l_s_ext-ts_last_request = l_s_part-timestamp_verb. |
| 309| l_s_ext-last_request = l_s_part-partnr. |
| 310| if l_s_ext_db-ts_last_request <> l_s_ext-ts_last_request or |
| 311| l_s_ext_db-last_request <> l_s_ext-last_request. |
| 312| l_s_ext-ts_data_changed = l_timestamp. |
| 313| l_changed = 'X'. |
| 314| endif. |
| 315| if l_changed = 'X'. |
| 316| modify rsmdatastate_ext from l_s_ext. |
| 317| endif. |
| 318| endif. |
| 319| |
| 320| if not ( i_dta_type = rsstm_c_types-psa_new or |
| 321| i_dta_type = rsstm_c_types-psa_old ). |
| 322| call function 'RSM_LAST_CHANGE_CHECK_UPDATE' |
| 323| exporting |
| 324| i_dta = i_dta(30) |
| 325| i_tstmp = l_s_ext-ts_data_changed. |
|
|Active Calls/Events |
|No. Ty. Program Include Line |
| Name |
| 16 FUNCTION SAPLRSSTATMAN LRSSTATMANU12 306 |
| RSSTATMAN_UPDATE_DATASTATE_EXT |
| 15 FORM SAPLRSM1 LRSM1U23 768 |
| RSM1_UPDATE_RSMDATASTATE |
| 14 FORM SAPLRSM1 LRSM1F08 5520 |
| RSM1_INIT_PARTTAB |
| 13 FORM SAPLRSM1 LRSM1U23 187 |
| RSSM_UPDATE_RSMDATASTATE |
| 12 FUNCTION SAPLRSM1 LRSM1U23 139 |
| RSSM_UPDATE_RSMDATASTATE |
| 11 METHOD CL_RSSM_STATMAN===============CP CL_RSSM_STATMAN===============CM00L 15 |
| CL_RSSM_STATMAN=>IF_RSBK_REQUEST_OBSERVER~AFTER_FINAL_STATE_TRANSITION |
| 10 METHOD CL_RSBK_REQUEST_STATE=========CP CL_RSBK_REQUEST_STATE=========CM01S 13 |
| CL_RSBK_REQUEST_STATE=>AFTER_FINAL_STATE_TRANSITION |
| 9 METHOD CL_RSBK_REQUEST===============CP CL_RSBK_REQUEST===============CM00H 11 |
| CL_RSBK_REQUEST=>IF_RSBK_REQUEST~SET_USTATE_RED |
| 8 FORM SAPLRSBM_REQUEST_GUI LRSBM_REQUEST_GUIF01 26 |
| SET_USTATE_300 |
| 7 MODULE (PAI) SAPLRSBM_REQUEST_GUI LRSBM_REQUEST_GUII01 122 |
| USER_COMMAND_0300 |
| 6 MODULE (PAI) SAPLRSBM_REQUEST_GUI LRSBM_REQUEST_GUII01 70 |
| USER_COMMAND_100 |
| 5 FUNCTION SAPLRSBM_REQUEST_GUI LRSBM_REQUEST_GUIU01 24 |
| RSBM_SHOW_REQUEST |
| 4 FUNCTION SAPLRSS2 LRSS2U26 39 |
| RSS2_CALL_FCODE_EMPTY_GLOBALS |
| 3 FORM SAPLRSS2 LRSS2U26 1 |
| RSS2_CALL_FCODE_EMPTY_GLOBALS |
| 2 FORM SAPMSSY1 SAPMSSY1 85 |
| REMOTE_FUNCTION_CALL |
| 1 MODULE (PBO) SAPMSSY1 SAPMSSY1 30 |
| %_RFC_START |
Please advise me,
Thanks and Regards,
Uma -
RSA1 going to shortdump, ERROR: Invalid GUI input data: Message no. 00123
dear experts,
while executing RSA1 going to short dump, ERROR: Invalid GUI input data: Message no. 00123 in sap-bi 7.0
plz need help,
regards.John,
Those are the specs of the Software Components, the backend... As we mentioned before, download the latest SAPGUI version and install it in your PC...
The latest SAPGUI can be downloaded from https://websmp204.sap-ag.de/support, go to Downloads, then "Browse the Navigation Area", on the left click "A-Z Index", then click on "G" and you'll see the "SAP GUI FOR WINDOWS" option, click on it...
You can download it from here... Please notice your OSS user needs authorization to do so... Probably need to check with your Basis guys for this...
Hope this helps.
Luis -
BI 7.6 Latest Trail version after RSA1 action MaxDB stopped
Hi,
BI 7.6 latest trail version i installed after RSA1 activation once system restarted my DISP+WORK.EXE got stopped, please tel me how to resolve when i see log stated below;
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 2560] Thu Dec 27 22:17:56 2007
[Thr 2560] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 94
intno 20050900
make: multithreaded, ASCII, optimized
pid 2556
[Thr 2560] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2556) [msxxserv.c 1824]
[Thr 2560] MsInitAclInfo: acl file D:\SAP\NSP\SYS\global\ms_acl_info.DAT not found, unrestricted access
[Thr 2560] MsGetOwnIpAddr: my host addresses are :
[Thr 2560] 1 : [200.200.200.201] jagadesh (HOSTNAME)
[Thr 2560] 2 : [127.0.0.1] jagadesh (LOCALHOST)
[Thr 2560] 3 : [192.168.0.100] jagadesh.hsd1.nj.comcast.net. (NILIST)
[Thr 2560] MsHttpInit: full qualified hostname = jagadesh
[Thr 2560] HTTP logging is switch off
[Thr 2560] set HTTP state to LISTEN
[Thr 2560] ms/icf_info_server : deleted
[Thr 2560] *** I listen to port sapmsNSP (3600) ***
[Thr 2560] *** I listen to internal port 3900 (3900) ***
[Thr 2560] *** HTTP port 8100 state LISTEN ***
[Thr 2560] CUSTOMER KEY: >R1490247412<
[Thr 2560] Thu Dec 27 22:19:09 2007
[Thr 2560] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from jagadesh_NSP_00 [msxxserv.c 4679]
[Thr 2604] Thu Dec 27 22:19:14 2007
[Thr 2604] MsSExit: received SIGINT (2)
[Thr 2604] ***LOG Q02=> MsSHalt, MSStop (Msg Server 2556) [msxxserv.c 5944]
++++++++++++++++++++++++++++++
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 2564
Thu Dec 27 22:17:57 2007
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2564) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Dec 27 22:18:02 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >jagadesh_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 04F20040, size: 4205552)
DpShMCreate: allocated sys_adm at 04F20040
DpShMCreate: allocated wp_adm at 04F21A28
DpShMCreate: allocated tm_adm_list at 04F232E0
DpShMCreate: allocated tm_adm at 04F23310
DpShMCreate: allocated wp_ca_adm at 052935A0
DpShMCreate: allocated appc_ca_adm at 05293A50
DpShMCreate: allocated comm_adm at 05293F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05314DB0
DpShMCreate: allocated gw_adm at 05314DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05314E20
DpShMCreate: allocated wall_adm at 05314E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( jagadesh) [dpxxdisp.c 11663]
DpStartStopMsg: send start message (myname is >jagadesh_NSP_00 <)
DpStartStopMsg: start msg sent
Thu Dec 27 22:18:03 2007
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Thu Dec 27 22:18:42 2007
ERROR => W0 (pid 2640) died [dpxxdisp.c 14318]
ERROR => W1 (pid 2648) died [dpxxdisp.c 14318]
ERROR => W2 (pid 2656) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9f --> 0x9e
ERROR => W3 (pid 2664) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9e --> 0x9c
ERROR => W4 (pid 2672) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9c --> 0x98
ERROR => W5 (pid 2680) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x98 --> 0x90
ERROR => W6 (pid 2688) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:18:52 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Dec 28 03:18:52 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2640 Ended no 1 0 0
1 DIA 2648 Ended no 1 0 0
2 DIA 2656 Ended no 1 0 0
3 UPD 2664 Ended no 1 0 0
4 ENQ 2672 Ended no 1 0 0
5 BTC 2680 Ended no 1 0 0
6 SPO 2688 Ended no 1 0 0
Dispatcher Queue Statistics Fri Dec 28 03:18:52 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
4
4
2000
4
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 11
wake_evt_udp_now 0
wake events total 7, udp 7 (100%), shm 0 ( 0%)
since last update total 7, udp 7 (100%), shm 0 ( 0%)
Dump of tm_adm structure: Fri Dec 28 03:18:52 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Dec 28 03:18:52 2007
=============================
Slots: 20, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:18:57 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >jagadesh_NSP_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2624) (SOFT_KILL)
Stop icman
killing process (2632) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2624 HANDLE:1636)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:18:58 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2624 HANDLE:1636)
wait for end of icman
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:18:59 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:00 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:01 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:02 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:03 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:04 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:05 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:06 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:07 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:08 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:09 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2632 HANDLE:1644)
DpStartStopMsg: send stop message (myname is >jagadesh_NSP_00 <)
NiIMyHostName: hostname = 'jagadesh'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Thu Dec 27 22:19:10 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11976]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1600 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1600 (pos=2)
SiSelNRemove: removed sock 1600
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/20/7
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 14)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1600
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2564) [dpxxdisp.c 10333]
Good Bye .....
+++++++++++++++++++++++++++++
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Dec 27 22:18:03 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' ...
B Library 'D:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' loaded
B Version of 'D:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' is "700.08", patchlevel (0.95)
B New connection 0 created
M sysno 00
M sid NSP
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 95
M intno 20050900
M make: multithreaded, ASCII, optimized
M pid 2640
M
M kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2640) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 6328 (904)
M DpShMCreate: sizeof(tm_adm) 3605136 (17936)
M DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
M DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm) 528048 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1280)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 04F20040, size: 4205552)
M DpShMCreate: allocated sys_adm at 04F20040
M DpShMCreate: allocated wp_adm at 04F21A28
M DpShMCreate: allocated tm_adm_list at 04F232E0
M DpShMCreate: allocated tm_adm at 04F23310
M DpShMCreate: allocated wp_ca_adm at 052935A0
M DpShMCreate: allocated appc_ca_adm at 05293A50
M DpShMCreate: allocated comm_adm at 05293F00
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 05314DB0
M DpShMCreate: allocated gw_adm at 05314DF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05314E20
M DpShMCreate: allocated wall_adm at 05314E28
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Dec 27 22:18:04 2007
M ThInit: running on host jagadesh
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.095 (Make PL 0.95)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.095) MaxDB DBSL patch collection 1 2007 (note 1014270)
C (0.082) MaxDB DBSL patch collection 3 2006 (note 991258)
C (0.079) MaxDB DBSL patch collection 2 2006 (note 984406)
C (0.068) MaxDB DBSL patch collection 1 2006 (note 962708)
C (0.051) DB50 perm block defect (note 934194)
C (0.046) ADBC: invalid data when fetching cursor with hold (note 925337)
C (0.045) Signal 11 during creation of BIA index (note 920743)
C (0.038) MaxDB DBSL patch collection 2 2005 (note 908602)
C (0.034) Livecache unicode connect (use SDK 7.6.0 b11) (note 901576)
C (0.028) Disable LVC codepage checking (note 882788)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 002-121-083-965
C SQLDBC Library Version : libSQLDBC 7.6.2 BUILD 014-123-152-175
C SQLDBC client runtime is MaxDB 7.6.2.014 CL 152175
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C
C Thu Dec 27 22:18:05 2007
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:database not running))
[dbsdbsql.cpp 136]
B ***LOG BV3=> severe db error -10709 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:database not running) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10240]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server jagadesh_NSP_00 on host jagadesh (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Dec 27 22:18:05 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10439
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2640) [dpnttool.c 327]
+++++++++++++++++++++++
Regards
JackHi,
BI 7.6 latest trail version i installed after RSA1 activation once system restarted my DISP+WORK.EXE got stopped, please tel me how to resolve when i see log stated below;
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 2560] Thu Dec 27 22:17:56 2007
[Thr 2560] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 94
intno 20050900
make: multithreaded, ASCII, optimized
pid 2556
[Thr 2560] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2556) [msxxserv.c 1824]
[Thr 2560] MsInitAclInfo: acl file D:\SAP\NSP\SYS\global\ms_acl_info.DAT not found, unrestricted access
[Thr 2560] MsGetOwnIpAddr: my host addresses are :
[Thr 2560] 1 : [200.200.200.201] jagadesh (HOSTNAME)
[Thr 2560] 2 : [127.0.0.1] jagadesh (LOCALHOST)
[Thr 2560] 3 : [192.168.0.100] jagadesh.hsd1.nj.comcast.net. (NILIST)
[Thr 2560] MsHttpInit: full qualified hostname = jagadesh
[Thr 2560] HTTP logging is switch off
[Thr 2560] set HTTP state to LISTEN
[Thr 2560] ms/icf_info_server : deleted
[Thr 2560] *** I listen to port sapmsNSP (3600) ***
[Thr 2560] *** I listen to internal port 3900 (3900) ***
[Thr 2560] *** HTTP port 8100 state LISTEN ***
[Thr 2560] CUSTOMER KEY: >R1490247412<
[Thr 2560] Thu Dec 27 22:19:09 2007
[Thr 2560] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from jagadesh_NSP_00 [msxxserv.c 4679]
[Thr 2604] Thu Dec 27 22:19:14 2007
[Thr 2604] MsSExit: received SIGINT (2)
[Thr 2604] ***LOG Q02=> MsSHalt, MSStop (Msg Server 2556) [msxxserv.c 5944]
++++++++++++++++++++++++++++++
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 2564
Thu Dec 27 22:17:57 2007
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2564) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Dec 27 22:18:02 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >jagadesh_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 04F20040, size: 4205552)
DpShMCreate: allocated sys_adm at 04F20040
DpShMCreate: allocated wp_adm at 04F21A28
DpShMCreate: allocated tm_adm_list at 04F232E0
DpShMCreate: allocated tm_adm at 04F23310
DpShMCreate: allocated wp_ca_adm at 052935A0
DpShMCreate: allocated appc_ca_adm at 05293A50
DpShMCreate: allocated comm_adm at 05293F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05314DB0
DpShMCreate: allocated gw_adm at 05314DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05314E20
DpShMCreate: allocated wall_adm at 05314E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( jagadesh) [dpxxdisp.c 11663]
DpStartStopMsg: send start message (myname is >jagadesh_NSP_00 <)
DpStartStopMsg: start msg sent
Thu Dec 27 22:18:03 2007
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Thu Dec 27 22:18:42 2007
ERROR => W0 (pid 2640) died [dpxxdisp.c 14318]
ERROR => W1 (pid 2648) died [dpxxdisp.c 14318]
ERROR => W2 (pid 2656) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9f --> 0x9e
ERROR => W3 (pid 2664) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9e --> 0x9c
ERROR => W4 (pid 2672) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9c --> 0x98
ERROR => W5 (pid 2680) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x98 --> 0x90
ERROR => W6 (pid 2688) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:18:52 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Dec 28 03:18:52 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2640 Ended no 1 0 0
1 DIA 2648 Ended no 1 0 0
2 DIA 2656 Ended no 1 0 0
3 UPD 2664 Ended no 1 0 0
4 ENQ 2672 Ended no 1 0 0
5 BTC 2680 Ended no 1 0 0
6 SPO 2688 Ended no 1 0 0
Dispatcher Queue Statistics Fri Dec 28 03:18:52 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
4
4
2000
4
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 11
wake_evt_udp_now 0
wake events total 7, udp 7 (100%), shm 0 ( 0%)
since last update total 7, udp 7 (100%), shm 0 ( 0%)
Dump of tm_adm structure: Fri Dec 28 03:18:52 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Dec 28 03:18:52 2007
=============================
Slots: 20, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:18:57 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >jagadesh_NSP_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2624) (SOFT_KILL)
Stop icman
killing process (2632) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2624 HANDLE:1636)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:18:58 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2624 HANDLE:1636)
wait for end of icman
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:18:59 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:00 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:01 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:02 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:03 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:04 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:05 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:06 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:07 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:08 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:09 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2632 HANDLE:1644)
DpStartStopMsg: send stop message (myname is >jagadesh_NSP_00 <)
NiIMyHostName: hostname = 'jagadesh'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Thu Dec 27 22:19:10 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11976]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1600 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1600 (pos=2)
SiSelNRemove: removed sock 1600
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/20/7
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 14)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1600
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2564) [dpxxdisp.c 10333]
Good Bye .....
+++++++++++++++++++++++++++++
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Dec 27 22:18:03 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' ...
B Library 'D:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' loaded
B Version of 'D:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' is "700.08", patchlevel (0.95)
B New connection 0 created
M sysno 00
M sid NSP
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 95
M intno 20050900
M make: multithreaded, ASCII, optimized
M pid 2640
M
M kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2640) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 6328 (904)
M DpShMCreate: sizeof(tm_adm) 3605136 (17936)
M DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
M DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm) 528048 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1280)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 04F20040, size: 4205552)
M DpShMCreate: allocated sys_adm at 04F20040
M DpShMCreate: allocated wp_adm at 04F21A28
M DpShMCreate: allocated tm_adm_list at 04F232E0
M DpShMCreate: allocated tm_adm at 04F23310
M DpShMCreate: allocated wp_ca_adm at 052935A0
M DpShMCreate: allocated appc_ca_adm at 05293A50
M DpShMCreate: allocated comm_adm at 05293F00
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 05314DB0
M DpShMCreate: allocated gw_adm at 05314DF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05314E20
M DpShMCreate: allocated wall_adm at 05314E28
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Dec 27 22:18:04 2007
M ThInit: running on host jagadesh
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.095 (Make PL 0.95)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.095) MaxDB DBSL patch collection 1 2007 (note 1014270)
C (0.082) MaxDB DBSL patch collection 3 2006 (note 991258)
C (0.079) MaxDB DBSL patch collection 2 2006 (note 984406)
C (0.068) MaxDB DBSL patch collection 1 2006 (note 962708)
C (0.051) DB50 perm block defect (note 934194)
C (0.046) ADBC: invalid data when fetching cursor with hold (note 925337)
C (0.045) Signal 11 during creation of BIA index (note 920743)
C (0.038) MaxDB DBSL patch collection 2 2005 (note 908602)
C (0.034) Livecache unicode connect (use SDK 7.6.0 b11) (note 901576)
C (0.028) Disable LVC codepage checking (note 882788)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 002-121-083-965
C SQLDBC Library Version : libSQLDBC 7.6.2 BUILD 014-123-152-175
C SQLDBC client runtime is MaxDB 7.6.2.014 CL 152175
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C
C Thu Dec 27 22:18:05 2007
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:database not running))
[dbsdbsql.cpp 136]
B ***LOG BV3=> severe db error -10709 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:database not running) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10240]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server jagadesh_NSP_00 on host jagadesh (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Dec 27 22:18:05 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10439
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2640) [dpnttool.c 327]
+++++++++++++++++++++++
Regards
Jack -
BDLS failing with ASSERTION_FAILED dump
Dear Experts,
We have replaced the existing quality system DF0 with RC0.These both system are quality systems and RC0 has been refreshed from production.
So in BW qulaity system we need to replace the DF0 with RC0 as source system. I have created logical system name LSRC0310 for RC0 in BW qulaity system and ran a BDLS to convert DF0 to RC0. But it is giving a dump ASSERTION_FAILED.
Earlier it failed with error that logical system LSRC0310 name alreday exists.So i deleted the logical system name and ran BDLS but it again failed with same error.I have checked the logs and it just makes an entry in table TBDLS, TBDLST. The logs in BDLSS also says that the conversion went in error with "Error in field of table . Manual correction required."
Thus the source system DF0 is not replaced in RSA1 also i can still see cubes pointing to DF0.
I have referred to Modify source system link but it is failing in the BDLS step so cannot proceed ahead.
Please can you guide and help is solving this issue.
Regards,
KUldeep.Thanks Walter for your reply.
This note is already present in the system and still BDLS fails with this message.
I hope my approach is correct.
Currently source system is DF0 and we want to convert to RC0. So running a BDLS will convert all the logical source system names for all the transfer structure and DTPs and transformations.Then after BDLS step i can restore the source system in RSA1.
Please confim if my this is feasible.
Regards,
Kuldeep. -
Cannot create source system in RSA1
Hi,
I have a BI System:
Netweaver 7.0 unicode
BI_CONT 7.03
Windows 2003 server
SAP_BASIS: 700_016
SAP_BW: 700_18
I have an ECC 6.0 system:
Netweaver 7.0 non-unicode
Windows 2003 server
SAP_BASIS: 700_015
I go into RSA1 on my BI system
Click on Source Sytems
right-click on SAP and choose Create
I then fill-in the necessary ionformation and click on the Green check.
I am asked to login as an admin user.
I receive a popup sating that user already exist in source system, I choose Continue.
I receive a popup saying RFC destination already exists in source system. I choose USE.
I get this error at this stage: Error in source system JCB275.
So, I check RFC conenctions, they all work fine.
I finally find an error in SM21 in my ECC 6.0 system:
Run-time error "DYNPRO_SEND_IN_BACKGROUND" occurred
short dump generated.
So, I go into ST22 and try to get more info on the short dump (I only copy/pasted some info):
Runtime Errors DYNPRO_SEND_IN_BACKGROUND
Date and Time 06.02.2009 09:56:18
The current ABAP program "SAPLSTRD" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
During background processing, the system attempted to send a
screen to a user.
Current screen: "SAPLSTRD " 0351.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DYNPRO_SEND_IN_BACKGROUND" " "
"SAPLSTRD" or " "
"SYSTEM-EXIT"
Client.............. 700
User................ "BRUNEERI"
Transaction......... "RSA1"
Call Program........."SAPLRSAC"
Function Module..... "RSAP_BIW_CONNECT"
Call Destination.... "JCB275"
Source Server....... "svr60dbw_DBI_11"
Source IP Address... "10.16.33.3"
I search SDN and SAP notes to no avail.
Note that this ECC 6.0 system is also connected to another BI system and it works fine on that other system.
thanks to allsolution found:
config needs to be opened on source system ,if not, a popup tries to tell you that config needs to be opened, but it cannot because the frontend is not active on this connection. -
Business Content tab is empty in RSA1
Hi all :
I have installed Netweaver 2004s, with BI_CONT 702 SP4.
When I execute the transaction RSA1, in the tree do not appear the BUSINESS CONTENT pushbutton, if I click in others pushbuttons, appear BUSINESS CONTENT button, but under it, there is nothing.
Now, if I go to the menu: GOTO --> Install Business Content, I recieve a DUMP.
How I can to solve this problem?
Thanks.
PD: Other components have SP7(SAP_ABA700, SAP_BASIS700,SAP_BW700, PI_BASIS_2005_1_700)Hi
This a basis related issue, ask basis guide, get the SU53 dump
Thank
Samit -
Error in module RSQL of the datasource inter face + RSA1
Hi All,
We have installed a fresh BIW server on MSSQL database 2005. We have selected components like as ABAP.JAVA,EP,EP Core ,BI Java. While replicating the datasource using tcode RSA1 from R/3 Retail Server we are getting an error Error in module RSQL of the datasource inter face .
Details of Support package level-:
SAP_ABA 700 0016 SAPKA70016 Cross-Application Component
SAP_BASIS 700 0016 SAPKB70016 SAP Basis Component
PI_BASIS 2006_1_700 0007 SAPKIPYM07 Basis Plug-In (PI_BASIS) 2006_1_700
SAP_BW 700 0018 SAPKW70018 SAP NetWeaver BI 7.0
BI_CONT 703 0008 SAPKIBIIP8 Business Intelligence Content
Please suggest us the solution.
Note: we are not getting any dump in st22. we have already checked the note 1162821
Regards,
DushyantThanks a lot ,we got the solution.
Regards,
Dushyant
Maybe you are looking for
-
Officejet Pro 6830 Won't Print!!
Hi, I have recently purchased an HP Officejet Pro 6830 and after being set up it just doesn't want to print. I can't print a test page on it's own but with the HP Print and Scan Doctor it prints test pages. It can't print from any Microsoft Office 2
-
Error in webdynpro(ABAP) application development
Hi, I am very new in webdynpro (ABAP) application development. I want to create some application based on webdynpro ABAP for few Z- Report. What is the prerequisite to develop a application based on webdynpro( ABAP ) .Because when I am trying
-
Firefox 15.0.1 gives an error message when trying to log into my account @u.boisestate.edu
I'm at student at Boise State. When I try to log into my broncomail account, or when I try to access broncomail through the Firefox Mail, I get the following message. The page isn't redirecting properly Firefox has detected that the server is redirec
-
Help I can no longer access my I tunes from my computer. It comes up with the message MSVCR80.dll is missing. Can anyone give me very simple instructions as to how i can fix this. I am not very computer literate.
-
Stop ending call with power button
Is there any way I can turn this feature off?