RSA1 - ECC 5.0 Backend "Source System" shows up as a BW System?????

Hello,
I'm working in RSA1 on my development BI system (BID) building a source system connection to our R/3 (ECC 5.0) (DEV) backend system. I've got the logical systems defined and assigned, clients opened, and users built.
Here's the issue:
When I build the connection to the backend ECC 5.0 system, it's coming up as a BIW system (see Message Test below - that' from the log)
My question is - is it seeing it as a BW System, versus an R/3 System, because in ECC 5.0 BIW is integrated / delivered within ECC 5.0?
Cut-and-paste from the log entry where
Message Text
Creating logical Business Information Warehouse on source system PRDCLT100

Hi Ajay,
I first click the scroll note button above "Display Node Log" then see the second message in the log below which says "Creating logical Business Information Warehouse on source system ........"
All messages there are status "green" i.e. informational versus warning or error..

Similar Messages

Whenever I connect to network from datacard. My system show as message "Restart your system.Hold the power button until system turn off"

I have purchased new MAC Book Pro recently. When connect to net using my datacard, net start's working after some time system fire a message saying that "Restart Your System. Hold power button until system turn off". I have configure network setting too even i am facing the problem.
Please suggest me were I am going wrong.
Bug Report Shown as :
Interval Since Last Panic Report: 12616 sec
Panics Since Last Report:          7
Anonymous UUID:                    947C5556-58AF-4B93-886D-6EDB24957F96
Wed May 25 19:55:50 2011
panic(cpu 3 caller 0xffffff80002d11f4): Kernel trap at 0xffffff80002c5330, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000008, CR3: 0x0000000000100000, CR4: 0x0000000000040660
RAX: 0xffffff800c5eac40, RBX: 0x0000000000000008, RCX: 0x0000000001000000, RDX: 0x0000000000000008
RSP: 0xffffff805f753cf0, RBP: 0xffffff805f753cf0, RSI: 0x0000000000000002, RDI: 0x0000000000000008
R8: 0x00000000418df000, R9: 0x0000000000000000, R10: 0x0000000000000000, R11: 0xffffff80004f4e5e
R12: 0x0000000000000008, R13: 0x0000000000000246, R14: 0xffffff805f753d10, R15: 0x0000000000000010
RFL: 0x0000000000010286, RIP: 0xffffff80002c5330, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 3), Frame : Return Address
0xffffff805f753990 : 0xffffff8000204d15
0xffffff805f753a90 : 0xffffff80002d11f4
0xffffff805f753be0 : 0xffffff80002e3f1a
0xffffff805f753bf0 : 0xffffff80002c5330
0xffffff805f753cf0 : 0xffffff80002503c8
0xffffff805f753d10 : 0xffffff7f80852d23
0xffffff805f753f20 : 0xffffff7f8085325c
0xffffff805f753fa0 : 0xffffff80002c84f7
      Kernel Extensions in backtrace (with dependencies):
         com.apple.iokit.IOSerialFamily(10.0.3)@0xffffff7f80850000->0xffffff7f80859fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10J3210
Kernel version:
Darwin Kernel Version 10.7.1: Mon Jan 31 14:55:53 PST 2011; root:xnu-1504.10.48~4/RELEASE_X86_64
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 965216859070
unloaded kexts:
com.apple.filesystems.cd9660          1.4.1 (addr 0xffffff7f80f3c000, size 0x32768) - last unloaded 555132792378
loaded kexts:
com.ZTE.driver.ModemDriverMacEx          1.0.6d1
com.apple.driver.AppleHWSensor          1.9.3d0
com.apple.driver.AGPM          100.12.31
com.apple.filesystems.autofs          2.1.0
com.apple.driver.AppleMikeyHIDDriver          1.2.0
com.apple.driver.AppleHDA          2.0.2f9
com.apple.driver.AppleMikeyDriver          2.0.2f9
com.apple.driver.AudioAUUC          1.53
com.apple.driver.AppleUpstreamUserClient          3.5.3
com.apple.driver.AppleMCCSControl          1.0.17
com.apple.driver.SMCMotionSensor          3.0.1d2
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.1.6
com.apple.driver.ACPI_SMC_PlatformPlugin          4.6.0d12
com.apple.driver.AppleLPC          1.5.1
com.apple.driver.AppleBacklight          170.0.43
com.apple.kext.AppleSMCLMU          1.5.2d6
com.apple.driver.AppleIntelHDGraphics          6.3.0
com.apple.driver.AppleIntelSNBGraphicsFB          6.3.0
com.apple.driver.AppleUSBTCButtons          201.2
com.apple.driver.AppleUSBTCKeyboard          201.2
com.apple.driver.AppleIRController          303.8
com.apple.BootCache          31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.iokit.SCSITaskUserClient          2.6.6
com.apple.iokit.IOAHCIBlockStorage          1.6.3
com.apple.driver.AppleSDXC          1.0.2
com.apple.driver.AppleUSBHub          4.2.0
com.apple.driver.AppleSmartBatteryManager          160.0.0
com.apple.driver.AppleFWOHCI          4.7.3
com.apple.driver.AirPort.Brcm4331          429.10.1
com.apple.iokit.AppleBCM5701Ethernet          3.0.2b8
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleAHCIPort          2.1.6
com.apple.driver.AppleUSBEHCI          4.2.0
com.apple.driver.AppleACPIButtons          1.3.6
com.apple.driver.AppleRTC          1.3.1
com.apple.driver.AppleHPET          1.5
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.3.6
com.apple.driver.AppleAPIC          1.4
com.apple.driver.AppleIntelCPUPowerManagementClient          142.4.0
com.apple.security.sandbox          1
com.apple.security.quarantine          0
com.apple.nke.applicationfirewall          2.1.11
com.apple.iokit.CHUDUtils          364
com.apple.iokit.CHUDProf          366
com.apple.driver.AppleIntelCPUPowerManagement          142.4.0
com.apple.nke.ppp          1.5 - last loaded 520102234363
com.apple.iokit.IOSCSIBlockCommandsDevice          2.6.6
com.apple.iokit.IOUSBMassStorageClass          2.6.6
com.apple.driver.AppleThunderboltDPOutAdapter          1.1.1
com.apple.driver.AppleThunderboltDPInAdapter          1.1.1
com.apple.driver.AppleThunderboltDPAdapterFamily          1.1.1
com.apple.driver.AppleThunderboltPCIDownAdapter          1.0.5
com.apple.driver.DspFuncLib          2.0.2f9
com.apple.driver.AppleProfileReadCounterAction          17
com.apple.driver.AppleProfileTimestampAction          10
com.apple.driver.AppleProfileThreadInfoAction          14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction          10
com.apple.driver.AppleProfileCallstackAction          20
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.AppleThunderboltNHI          1.1.9
com.apple.iokit.IOThunderboltFamily          1.2.2
com.apple.iokit.IOFireWireIP          2.0.3
com.apple.iokit.IOSurface          74.2
com.apple.iokit.IOBluetoothSerialManager          2.4.3f1
com.apple.iokit.IOSerialFamily          10.0.3
com.apple.iokit.IOAudioFamily          1.8.3fc2
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleHDAController          2.0.2f9
com.apple.iokit.IOHDAFamily          2.0.2f9
com.apple.iokit.AppleProfileFamily          41.4
com.apple.driver.IOPlatformPluginFamily          4.6.0d12
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.0
com.apple.driver.AppleSMC          3.1.0d5
com.apple.iokit.IONDRVSupport          2.2
com.apple.iokit.IOGraphicsFamily          2.2
com.apple.driver.BroadcomUSBBluetoothHCIController          2.4.3f1
com.apple.driver.AppleUSBBluetoothHCIController          2.4.3f1
com.apple.iokit.IOBluetoothFamily          2.4.3f1
com.apple.driver.AppleUSBMultitouch          207.5
com.apple.iokit.IOUSBHIDDriver          4.2.0
com.apple.driver.AppleUSBMergeNub          4.2.0
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.6
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.6
com.apple.iokit.IOCDStorageFamily          1.6.1
com.apple.driver.XsanFilter          402.1
com.apple.iokit.IOAHCISerialATAPI          1.2.5
com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.6
com.apple.iokit.IOUSBUserClient          4.2.0
com.apple.iokit.IOFireWireFamily          4.2.6
com.apple.iokit.IO80211Family          320.1
com.apple.iokit.IONetworkingFamily          1.10
com.apple.iokit.IOAHCIFamily          2.0.5
com.apple.iokit.IOUSBFamily          4.2.0
com.apple.driver.AppleEFIRuntime          1.4.0
com.apple.iokit.IOHIDFamily          1.6.6
com.apple.iokit.IOSMBusFamily          1.1
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          6
com.apple.iokit.CHUDKernLib          365
com.apple.driver.DiskImages          289
com.apple.iokit.IOStorageFamily          1.6.3
com.apple.driver.AppleACPIPlatform          1.3.6
com.apple.iokit.IOPCIFamily          2.6.1
com.apple.iokit.IOACPIFamily          1.3.0
Model: MacBookPro8,1, BootROM MBP81.0047.B04, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f96
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.10.1)
Bluetooth: Version 2.4.3f1, 2 service, 19 devices, 1 incoming serial ports
Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
Serial ATA Device: MATSHITADVD-R   UJ-8A8
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x8509, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0245, 0xfa120000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd110000 / 3
Thanks,

I had already written a book and I did not want to bombard people with more information, but in my previous research I did come across the major issues with the NVIDIA card. I also was well aware that Apple offered a replacement program that ended in December of 2012. I was going to add that in my original post, but I discounted that theory because I put my faith in the so called "Apple Genius" when I made my second trip to the Apple Store. I brought the NVIDIA card issue to his attention and asked him if he thought that may be the problem, but he said no. He said if it was the NVIDIA card that the screen would be completely black and there would be no startup chime. When I experienced the screen issues I thought it was a problem with the NVIDIA card or the logic board. I asked myself, how can a flawed hard drive cause the screen to act funny.
nbar and Rick Warren, I thank you both for your help and insight; people like you are the real "Apple Geniuses." I was hoping there was a way I could wipe the hard drive before I dumped the computer or attempted to sell it. I guess I will look into purchasing a new machine when I have the funds. Again...thank you both!

Create a Support Message in Production system showing up in Solution Manage

Has anyone setup the link between creating a support message (under help) in a production system (like ECC) and SAP's Solution Manager.
I understand that it uses BADI SBCOS001 with the interface method PREPARE_FEEDBACK_BO, but when I try to run it, it tells me that Customizing for feedback functionality missing. What functionality is missing? And how to I correct this? And how do I ensure it shows in SAP Solution Manager under a solution or project?
Thanks
Paul

Hi Paul
The only way is to use the IMG. I have just completed this via the IMG info. BUT, it is not that simple.
Make sure your RFC's are trusted and that you have SAP ALL during config.
I hope this will help:
Setup Service Desk
Steps to follow while configuring support desk.
1) Implement the note 903587 .
2) Create all the relevant RFC objects in the satellite system and add the appropriate logical components using transaction SMSY.
3) Check all the objects in the table BCOS_CUST using transaction SM30.
Appl : OSS_MSG
+ :W
DEST :BACK RFC NAME (for solution manager system keep this field as 'NONE')
+ :CUST 620
+ :1.0.
*4) Check whether the BC sets are activated or not using the transaction SCPR20.If the BC sets are not activated then implement the note 898614.The steps to activate the BC sets are described below
4.1) Activate SOLMAN40_SDESK_BASICFUNC_000 BC Set.
4.2) Activate this in expert mode with option u201COverwrite everythingu201D.
4.3) Activation of the following components has to be done by replicating the previous steps
3.1) SOLMAN40_SDESK_TPI_ACT_AST_001
3.2) SOLMAN40_SDESK_ACTIONLOG_001
3.3) SOLMAN40_SDESK_ACT_ADVCLOSE_001
3.4) SOLMAN40_SDESK_TEXTTYPES_001
*Depends upon the number of inactive BC set objects that we have after the upgrade.
4.4) if the actions mentioned in 4.3 are not listed while executing the transaction SCPR20, then implement the note 898614.In the source client 000 of the solution manager system create a transport request using transaction SE09, unpack the file 'PIECELIST_SERVICE_DESK_INIT.ZIP' from the attachment of the note. Copy the contents of the file 'PIECELIST_SERVICE_DESK_INITIAL.TXT' to the transport request. And activate the actions. Use transaction SCC1 to import the transport request to the solution manager client. If any short dump occurs during the activation, implement the note 939116.
5) Check whether the number range is set correctly. If not set the number ranges of basic notification (ABA) and the support desk message (Service transaction SLFN).To be able to use the same number ranges for both message types, the internal number range for basic notification (ABA) must correspond to the external number range for the support desk message.
Number ranges for ABA notifications
5.1) create an internal and external number range using transaction DNO_NOTIF.
5.2) assign number range intervals to groups internal and external.
5.3) SLF1 is the internal number range group
5.4) SLF2 and SLF3 is the external number range interval
5.5) Use transaction DNO_CUST01 to assign message categories to the number range.
5.51) Go to transaction DNO_CUST01
5.52) From the GOTO menu select the menu item DETAILS
5.53) Now you can assign the number range of basis notification (ABA) into the notification type.
The number range for ABA notification is 12 characters in length and to make it compatible with the CRM service transaction insert 2 ZEROES at the beginning.
Number ranges for Support Desk notification
5.54) Use transaction CRMC_NR_RA_SERVICE, and define the internal and external number ranges. Intervals must correspond to the intervals of the basic notifications (ABA notification).
5.6) Then assign both the external and internal numbering
5.61) Go to SPRO and then to SAP Solution Manager
5.62) Then select General Settings and then select Transaction types
5.63) Select the transaction type SLFN and then select the menu item DETAILS from the GOTO menu.
5.64) In the Transaction Numbering block, assign the internal and external number range. The Number Range object should be CRM_SERVIC.
5.7) To view the priorities use transaction DNO_CUST01 and select the notification type as SLF1 and then select priorities from the left pane of the screen. The priorities of the first four cannot be deleted, but new priorities can be added.
6) Check the Action profiles for ABA Notifications (Action profiles are used for synchronization of ABA notification with the CRM Service transaction).
6.1) To check the action profiles use the transaction SPPFCADM and select the application type DNO_NOTIF then select u2018DEFINE ACTION PROFILE AND ACTIONSu2019.
6.2) Select the item u2018SLFN0001_STANDARD_DNOu2019 and then from the menu GOTO, select the menu item DETAILS.
7) The Action profile u2018SLFN0001_STANDARD_DNOu2019 has to be assigned to the message category SLF1 (ABA notifications) using the transaction DNO_CUST01.
8) The action profile for the support desk message can be set to u2018SLFN0001_ADVANCEDu2019.
8.1) From SPRO select SAP Solution Manager then Scenario Specific Settings.
8.2) Select the item Service Desk and then to general settings.
8.3) Execute the category u2018Define Transaction Typesu2019.
8.4) Select the transaction type as SLFN
8.5) From the GOTO menu select the menu item u2018DETAILSu2019 and assign the action profile as SLFN0001_ADVANCED .
9) Activate the partner/ Organization
9.1) Go to CRM->MASTER DATA->BUSINESS PARTNER->INTEGRATION BUSINESS PARTNER ORGANIZATION MANAGEMENT->SET UP INTEGRATION WITH ORGANIZATIONAL MANAGEMENT.
9.2)Find the entries starting with HRALX
HRALX-HRAC WITH VALUE 'X'.
HRALX-OBPON WITH VALUE 'ON'.
HRALX-PBPON u2018ONu2019.
HRALX-MSGRE u2013 u20180u2019.
9.3) If entries are not found create it.
10) Generate Business partner screens
10.1) Go to transaction BUSP.
10.2) Execute the report with the following parameters
CLIENT - Client in which business partners should be created (solution manager client)
APPLICATION OBJECT-
SCREEN - *
Generate all/ selected screens - All screens.
delete sub screen containers -
11) implement SAP note 450640.
11.1) Go to transaction SA38 and select the report CRM_MKTBP_ZCACL_UPDATE_30.
11.2) Execute it with test mode box unchecked.
If a new relationship is to be created then steps 12 and 13 has to be followed
12) To create a relationship category
12.1) Go to transaction BUBA
12.2) Select the entry CRMH00: Undefined relationship
12.3) click on copy
12.4) Rename CRMH00 to ZCRMH00.
12.5) CREATE A RELATIONSHIP CATEGORY.
IN GENERAL DATA FILL LIKE ' FROM BP1 : HAS THE ACTIVITY GROUP '.
' FROM BP2 : IS A PART OF ATTUNE
13) Add the relationship category to the support team partner function
13.1)Use SPRO
IMG GUIDE->SAP SOLUTION MANAGER->SCENARIO SPECIFIC SETTINGS->
-> SERVICE DESK->PARTNER DETERMINATION PROCEDURE->DEFINE PARTNER FUNCTION.
13.2) FIND THE PARTNER FUNCTION SLFN0003 (SUPPORT TEAM).
13.3) In the field relation ship category, Select the newly created relationship category and save.
14) Steps 12 and 13 should be repeated for various business partner types like sold-to-party, message processors if new relationship is to be created for the respective business partner types.
15) Create a new access sequence for the support team determination
15.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide ->
SAP Solution Manager -> Configuration ->
-> Scenario Specific Settings ->Service Desk -> Partner Determination Procedure ->
->Define Access Sequence
15.2) Click on New Entries
15.3) Define a new access sequence with sequence name as u2018Z001u2019 and description u2018NEW BP RELATIONSHIP ACTIVITY GROUPu2019
15.4) Create an new Individual Access with the following value:
u2022 Batch Seq: 10
u2022 Dialog Seq : 10
u2022 Source : Business Partner Relationship.
u2022 Detail on the source:
u2022 Partner Function : Reported By (CRM)
u2022 Mapping/restrictions
u2022 Flag Mapping/definition for partner being Searched
u2022 Partner Function in Source: Support Team (CRM).
Save it.
This Access Sequence will give us the Partner which has the relationship assigned
to the Support Team in the Reported By partner data.
16) Adapt the partner determination schema/Function
16.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide ->
SAP Solution Manager -> Scenario Specific Settings ->Service Desk ->
-> Partner Determination Procedure -> Define Partner Determination Procedure.
16.2) The two options to adapt partner determination schema are
16.21) Adapt the standard Procedure (SLFN0001) or to create a new one by copying the standard one.
16.22) select the line starting with SLFN0001 or the newly created procedure.
16.23) Double Click on Partner Function in Procedure.
16.24) Select the Partner Function "Support Team", and click Details.
16.25) in the detail view only change the Partner Determination/access Sequence to
the one we've just created. Save your entry.
17) Create a root organizational model.
17.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Configuration-> Scenario Specific Settings ->Service Desk -> Organizational Model ->Create a Root Unit for Your Organizational Structure.
17.2) creating an organizational unit by entering the data in the BASIC DATA tab.
17.3) enter the organizational unit, the description and save it.
18) Create the support team organization
18.1) go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Scenario Specific Settings ->Service Desk -> Create Organizational Objects in the Organizational Structure. Or use transaction (PPOMA_CRM).
19) Create the business Partners.
19. 1) Key users- End user (Business Partner General) ,Address should be specified.
19.2) go to the transaction BP.
19.3) create a new Person, Select the role: Business Partner (Gen).
For Identification of the key user
19.31) click on the identification tab
19.32) enter a line in the identification number formatted as follows
IDTYPE : CRM001.
Identification number : <SID><INSTALL NUMBERS><CLIENT><USERNAME>
eg: USER NAME : USER1.
CLIENT : 100.
SID : ER1.
INSTALL NUMBER : 123456789.
IDENTIFICATION NUMBER : ER1 123456789 100 USER1.
20) Message Processors- Support Team members .
20.1) they should be created first as the users in the corresponding client of the solution manager.
20.2) As business partners they will have the role 'EMPLOYEE'.
20.3) Go to transaction BP .
20.4) Create New Person with the role employee.
20.5) In the Identification tab you should enter the user name in the employee data/User Name.
eg: username: proc1
enter proc1 in the field User name.
21) Organizational Business Partner- Organizational BPS have the same country in there main address tab. They should be created through the organizational model. Business partner corresponding to the root organization have the role 'SOLD TO PARTY'.
22) Assign the business partners (Message Processors) to the previously created support team.
22.1) Go to transaction PPOMA_CRM.
22.2) Select the support team 1.
22.3) Click on create
22.4) select position
22.5) call it 'MPROC_T1/Message Processors for team 1
22.6) Replicate it for the other support teams.
22.7) Select the position MPROC_T1/Message Processors for team1 and click assign,
choose owner/Business Partner find and select the business partner
22.8) Validate and Save it.
22.9) If the assignment of business partner is not possible then implement the note 1008656
Or 997009
23) Create the iBase component
23.1) IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Basic Settings -> Standard Configuration of Basic Settings -> Solution Manager -> iBase -> Initially Create and Assign the Component Systems as iBase Components.
23.2) or use the transaction IB51 to create the installed base.
23.3) it is also possible to create the SOLUTION_MANAGER, select the solution and go to menu Edit -> Initial Data Transfer for iBase.
24)Assign Business Partners to iBase Components
IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Basic Settings
-> SAP Solution Manager System ->ServiceDesk-> iBase -> Assign Business Partners to iBase Components.
*--optional--
If you want to be able to assign the System Administrator: Go to the IMG: SAP Solution Manager Implementation Guide -> Customer Relationship Management -> Basic Function -> Partner Processing -> Define Partner Determination Procedure.
Select the entry "00000032 Installed Base/IBase" and double click on Partner Functions in Procedure.
Then copy the Entry "Contact Person (CRM)" to a new entry with the partner Function "System Administrator (CRM)" , save it.
Go back to transaction IB52, select a component, and Goto -> Partner, you should be able
now to assign the partner Function "System Administrator".
25) Assign the SAP Standard Role to the user. Message Creator should have the role : SAP_SUPPDESK_PROCESS.
26)Define the transaction variant for the message processors
Go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Configuration -> Scenario Specific Settings ->Service Desk -> General Settings -> Specify User Selection Variant.
Here we will create variants for the central message processing transaction CRM_DNO_MONITOR.so that the user will have direct access to there dedicated message.
27) Go to transaction PFCG
27.1) Enter the role name as Z_MSG_PROCESSORS and choose single role.
27.2) Give a description Message Processor role and save it.
27.3) Go to the menu tab and choose add report
27.4) select the report type : ABAP Report
27.5) And in the report enter the report name as 'CRM_DNO_SERVICE_MONITOR'.
27.6) Enter the previously created variant.
27.7) flag the skip initial screen box.
27.8) flag the SAPGUI for windows.
27.9) Create a new transaction with tcode starting with Y or Z.
27.10)Display this transaction and check the values at the bottom of the screen
in the subscreen Default Values, you should have the following parameters:
u2022 D_SREPOVARI-REPORT = CRM_DNO_SERVICE_MONITOR
u2022 D_SREPOVARI-VARIANT = MY_TEAM_MSG
u2022 D_SREPOVARI-NOSELSCRN = X
And also all the user should have the correct role.

Backend Source of Supply not supported for Direct Material in SRM

Hi ,
When creating S/C or PO in SRM for Direct Material , backend Source of Supply ( i..e Purchasing Info Record or Backend Contracts ) not availble to select as a sourc of supply .
In our case, we are planning to maintain the sourc of supply (PIR or Contracts) in back end MM system only , then how can pick up the same ?
Can anyone please suggest on this .
Regards
NAP

NO Prashanta,
It is still pending for me . i just raised OSS message to SAP ...but SAP saying that
" I checked and found that in the classic scenario , Direct Materials cannot use backend contracts. The behavior described above is in accordance with the system design. Only local sources of supply (local contracts and interlinkages) can be
used in the direct material scenario, as well as as in the extended classic scenario . Therefore the above error message which you get "Specify a valid contract" is valid."
I replied with the doubt that "Thanks for reply but we are not convenience, since what we learnt from
different SAP Blogs, Below SAP help and SRM Experts discussion forum
is, for Ext Classic Scenario (since for direct materials it always
tales by default Ext Classic Scenario, although we implemented Classic)
Local SRM contract and Supplier List are the possible Source of Supply.
As per SAP help documentation for Self-Service Procurement (Extended
Classic) on below link
http://help.sap.com/saphelp_srm70/helpdata/en/e0/f6be5157a24340bf7b1279854a52e1/frameset.htm u201CYou can assign the sources proposed by the
system to items automatically (for example, if there is a single
contract for the item being procured) or manually in the case of a
quota arrangement, contract, or supplier from a supplier listu201D
As per SAP help documentation for Sourcing Using Supplier Lists on
below link,
http://help.sap.com/saphelp_srm70/helpdata/en/d8/33ec56f17f4404806072749f7e764f/frameset.htm u201CIn supplier lists, you can also manually allocate
back-end contracts from specific systems. This enables more effective
sourcing for back-end contractsu201D
In the Supplier List there is facility to enter the ECC Contract
Number. Supplier List donu2019t support local SRM contract. It supports
only ECC Contract /item.
As per your reply, do you mean to say that Source List is not a valid
Source of Supply for Direct Material in Classic Scenario (i.e. Ext
Classic scenario)? If not, then why the backend ECC Contract displays
as a Source of Supply, when we check the u201COrder as direct Materialu201D?
Kindly suggest"
Lets see.what SAP now replies.
Simultaniously I'm looking some enhancment
If you have nay update/soultion then please share with me.

B2B with ECC 6.0 backend error

Hi,
I receive the error "No customer found with customer number" when I try to checkout, with my shopping cart.
This is an internal POC. I've configured the UserManagement as 'R3_SU01User'. I've configured r3standardpitrex in B2B XCM configuration. I've maintained Shopadmin as well.
I know the problem has to do with "security". I've created a user on SU01, but if I add a customer number (KNA1) to the Goto>References button, I can not log onto B2B. It gives me the following error:
- A serious system error has occured
- The shoplist read from buffer if empty
-Contact the administrator
If I remove the KNA1 entry, I can log onto the shop. I am able to browse my catalog & add to the shopping basket...I just can't create a sales order because I'm not associated with a customer.
ECC 6.0 Backend
NetWeaver Java 7.0
Thanks for any help!

Please check note [1303890|http://service.sap.com/sap/support/notes/1303890]
Regards
Mark
Edited by: Mark Foley on Aug 20, 2010 4:31 PM
Edited by: Mark Foley on Aug 20, 2010 4:31 PM

In J1IFR-List subcontracting challans, system showing Zero Quantity pending although Qty is pending

In J1IFR-List subcontracting challans, system showing Zero Quantity pending although Qty is pending at MASOP vendor. After reconciliation of challan, the Qty sent=250 , Qty received= 113. system must show Qty pending = 137. But when we check in J1IF12, Qty sent=250 and Qty received=113. Why J1IFR report is showing incorrect output.
I am facing this problem after Ehp7 upgrade in SAP ECC 6.0 version.
Thanks & Regards,
Neeraj.

Are you using the same number ranges for different series group. This can cause inconsistency. Also check table J_1IGRXSUB whether right material documents are attached to your Challan.
Also refer to these notes which is only applicable for EHP6.
1753000 - Wrong output displayed for status in report selection-
J1IFR
and
1674607 - Duplicate entries while displaying Annexure IV in
J1IFR
Regards
Binoy

ECC Customer Ship to party not showing in BP relationship in CRM

Hello Experts,
The sold-to party 1111 and ship-to 100 are downloaded to CRM 6.0 from ECC 6.0
We have maintained this SHIP to PARTY - 100 for a sold-to party 1111 in ECC in the partner function tab in XD02. In this case BDoC got generatedin CRM, it is showing GREEN also, but still the ship-to 100 is not showing in the RELATIONSHIP button of BP - 1111 in CRM.
Please advice what will be the reason? Any note, web blog , any specific settings to be checked?
Regards

Hi
Yes, the BDoC type is BUPA_REL and it shows fully processed (showing in GREEN) in CRM system.
But still the relationship (ship-to party) is not shown in RELATIONSHIP for BP in CRM.
Any pointers?

Oracle Data Source not showing proposal fields

Hi, I need to create a DB Connect - Oracle Data Source. I go to the table / view matchcode, and I find the view we created for this data source, and in Proposal it doesn't bring any fields. I press the refresh button, and nothing happens.
Any idea what this could be??
Tanks in Advance
Manuel.-

HI
Change the data in the Flat file for Date field in the format YYYYMMDD. Then try viewing the Preview.
If it still shows error message like your system format does not match, Check the System date format, you can check in SU01-->defaults tab, change the data in the flat file with your system format and check.
Hope this helps,
Aparna Duvvuri

The System shows an Error while creating an Inhouse Repair Order

Hi Experts,
I am facing a problem related to An Inhouse repair Order. when i create an order the system shows me two errors
1. An error occurred in system during account assignment
2. An error has occured in the system while copying the document
What could be the possible problem with the order....
any help will be highly appreciated.....
Thanks in Advance.....

Hi vickee.sehgal ,
Can u please provide inhouse repair configuration settings in crm 7.0. I have requirement on this,i am not able to find relevant best practices.
Thanks & Regards
kishore kumar

In MD05 system show message "The MRP element no longer exist".

Hi Guru,
Need some help .
In MD04 transaction contain Purchase order, when I double click purchase order,It will get open . But when I open same purchase order in MD05 system show message u201CThe MRP element no longer exist".
Please help me , if any know the solution or any input. Open purchase order in system.
Regards
PNU

PNU,
I don't believe this is the same Purchase order.
Review closely order number/item number/schedule number. I believe you will see that the old entry (MD05) no longer exists, and has been replaced with a similar item.
Best Regards,
DB49

I have mid 2009 Mac Book Pro running 10.9.1. The hdmi mini port no longer supports sound on the Sony TV. This is apparently a change. It no longer shows as an option in system preferences/sound.Any ideas?

I have mid 2009 Mac Book Pro running 10.9.1. The hdmi mini port no longer supports sound on the Sony TV. This is apparently a change. It no longer shows as an option in system preferences/sound.Any ideas?

The 2009's didn't support sound on HDMI. That came in 2010. Are you sure it ever worked?

Creating Source systems in two same logical BW systems from single R/3 sys

Hi All,
We are facing an issue while creating Source systems in two same logical BW systems, from single R/3 systems. Our Basis team is telling that if we want to connect the single R/3 system into 2 BW systems with same logical name, we will need to delete the source systems from one BW systems and create in another system. Also they told by doing so it will delete all the transfer rules and PSA table existing in the current BW system, which has the source system connectivity with the R3 system now.
Is this anyway to create the same source systems in two same logical BW systems, from single R/3 systems without deleting the transfer rules?. Also please help us to get anu OSS note or document explaining this in details.
Regards.
Muruganand.K

Hi Muruganand,
I dont think it is possible as connecting one R/3 Source System to two BW Systems.
If you could get the possible solution, please do reply to the post.
Regards,
Kiran

Trying to load a Dreamweaver CS5 extension called Image Show Pro to mac operating system 10.9.2. Trial version worked fine, but when I try to load full version, Adobe Extension Manager crashes. I have downloaded new Extension Manager for CS5. and still c

Trying to load a Dreamweaver CS5 extension called Image Show Pro to mac operating system 10.9.2. Trial version worked fine, but when I try to load full version, Adobe Extension Manager crashes. I have downloaded new Extension Manager for CS5. and still crashes. Anybody else experience this? email:[email protected]

Hi bigd_bud,
Can you see if the solutions in this post help?
Re: Adobe Extension Manager crashes on mac 10.8
Thanks,
Preran

While updating 4.0 version to 5 version system shows sim card is not valid. My iphone is not working .Please help me

while updating 4.0 version to 5 version system shows sim card is not valid. My iphone is not working .Please help me

I would imagine your iPhone was hacked to make it work on your local carrier.
Updating the iOs to 5.xx will lock it back to the original carrier .The carrier holding the lock are the only
entity able to authorise the unlock .You will have to contact them and see if they unlock and the terms the apply

Push button ijn appraisal showing in backend but not showing inn portal

Hi Expert,
I would like to ask that push button in appraisal while configuring ESS/MSS package.
It is showing in backend, but not showing in portal.
Request you to give your inputs to bring push button on to the portal.

Hi,
are you using the same user to access backend and portal?. In backend, did you try from transaction PHAP_CHANGE with that user?. If you try with transaction PHAP_ADMIN in backed you are accessing as administrator, so you cannot compare the behaviour in PHAP_ADMIN and portal.
Regards,
Ana

RSA1 - ECC 5.0 Backend "Source System" shows up as a BW System?????

Similar Messages

Maybe you are looking for