RSA1 error

Experts,
I'm trying to implement interactive reporting in CRM web UI (2007).  I'm following the step in RSA1 "u2022     Logical system name has been changed for this system" error and when I ran the same T-code I got you can only work in client 300" The SAP note that is relevant to the step is suggesting to change the client system.
We have copied client is 000 per SAP recommended. Our source client is 300 (dev system)  and reporting client is 600. Can some one clarify on the following?
??? What are the consequences of changing the client. If I change the client back to 300, I'm afraid that it will impact on dev system as I have do the different configurations for report. 
1) It's my understanding that the reporting client is also acting a s BW client.
2) It will fetch the data from source client 300
3) Reporting cleint is only for reporting.

Do I need to give old system as 300 and new system as 600 in ths transaction? I hope this conversion will not messup my development client 300 which is our source system. We have somany projects where we use 300 client for our development work. Please advise
Thanks,
Sri

Similar Messages

  • SAP BIW 3.0B, Getting error in RSA1 " Error activating the ddic "

    IN RSA1 after creation of info source to the master data,when assigning the data source and selecting the Tranasfer Method as "PSA", Iam getting the following error.
    "Error activating the ddic" . The log has the following comments "Table /BIC/B0000104000 must be created in the database"
    The error message displayed is
    Activation of stgructure /BIC/B0000104000 in the dictionary failed
    Message No: RSAR695
    Please can some one help me in solving this problem.
    Thanks&Regards,
    Sudheer.

    sorry, you may be wrong in the forum as this is a BW/DDIC related question/problem.
    suggestion:
    you try se11 with the table name and try to create it.
    if it does not help you: it is time to file a message in service.sap.com/message.
    regards
    Peter

  • RSA1 Error during the retrieval of the logon data stored in secure storage

    Hi Gurus,
    when i go and check Source system the connection is OK, and RFC's from BI to R/3  and R/3 to BI is OK (including Authentication).
    but when i go and check Info provider there one customized object ZDTSYS01 is there when i check and and activate it it is giving error as below.
    All DDIC objects have been activated / deleted
    Post Processing/Checking the Activation for DataStore Object ZDTSYS01
    Creating Export DataSource and dependent Objects
    The creation of the export DataSource failed
    Reading the Metadata of ZDTSYS01 ...
    Creating DataSource 8ZDTSYS01 ...
    Error during the retrieval of the logon data stored in secure storage
    Error during the retrieval of the logon data stored in secure storage
    Error when creating the export DataSource and dependent Objects
    Program ID DC4B105KR4QT1KDW9HD7AXYEO retrieved for DataStore object ZDTSYS01
    Error when activating DataStore Object ZDTSYS01
    Deletion of Unused Dictionary Objects ( 3)
    please help me solve this issue
    Thanks in advance
    venkat

    Hi,
    1). Looks like SM59 Remote user has some issues. Can you check whether the user's are locked ?
    2). You can also correct this is TA STMS. Here you navigate to "System Overview (Shift+F6)".
    On the following screen, you select "Generate RFC DESTINATIONS" which can be found under "Extras".
    3). Please click on source system and restore the BW source system
    Please check the below 2 SAP Notes.
    538052 and 644015.This might solve your problem.
    Thanks,
    Arjun

  • RSA1 error  Logical system name has been changed for this system

    Hello All,
    Earlier the RSA1 was activated for client 300 on our crm 5.2. after that we changed the client to 500 using SE16 -> Type table RSADMINA / Check Colum BWMANDT -> 500.
    But now when we login to client 500 and execute RSA1 it is showing
    Logical system name has been changed for this system"
    In scc4 we have not made any changes. Can you tell what should be done ? in the pop up it is showing following steps
    Change the name of the logical system (table T000) for client back to SIDCLNT300. This enables you to continue working with the system.
    If you really want to change the logical name, than you can, if and when you:
    change the system name back to SIDCLNT300,
    delete all existing connections between this system and other systems,
    delete all transfer structures that still exist, and
    do not use ALE or Workflow.
    Guys do you know how to fix this ? .
    Also do you know Assignment of Source System to Source System ID (table RSSOURSYSTEM) using RSA1 ?
    Edited by: Sahad K on Mar 17, 2008 10:55 AM

    Hello Hari,
    Both the options you said  cannot be used
    since the logical system SIDCLNT300 is used by client 300 and it cannot be given to client 500.  Also there already exist a logical system SIDCLNT500 which is assigned to client 500.
    I found out the issue. In the table RSBASIDOC  the logical system name that can use rsa1( bw  client )is set as  SIDCLNT300).  Only if we delete that entry and set it to SIDCLNT500 ( 500) we can use it on client 500.
    The solution is specified in /message/3284842#3284842 [original link is broken]
    Let me try the solution 2 and inform you.
    Solution 2:
    You cannot delete the source system. Two cases have to be distinguished:
    The source system still exists.
    Switch to Transaction SM59. Find the destination which has the same name as the logical system of the source system from field SLOGSYS in table RSBASIDOC (see above).
    Such a destination does not exist in Transaction SM59. In this case, you have to create the destination to the source system. Name the destination equal the entry in SLOGSYS from above. Then return to the Administrator Workbench and repeat the deletion.
    The entry exists but a remote login is not possible. Correct the communication parameters.
    Everything works. Change to Transaction SE37, function module RSAR_LOGICAL_SYSTEM_DELETE, Sngl. test. Parameter I_LOGSYS = <log. name of the source system>, I_FORCE_DELETE = 'X'.
    The source system no longer exists or was replaced with another source system with the same IP address.
    Proceed as described in the first case but make sure, that the field 'Target host' contains a not existing server in the maintenance screen of the destination (Transaction SM59). If necessary, change an existing entry. Later when you delete, the system asks you whether you want to delete, although the source system is not available. Select 'Ignore'.
    Incase you have any idea other than this please let me know how to edit the RSBASIDOC table  and change the entry to client 500.
    Edited by: Sahad K on Mar 18, 2008 5:07 AM

  • RSA1 T-Code error

    hi experts,
    while i am running RSA1 T-Code in production system it is going to shotdump(ABAP RUN TIME ERROR). i am unable to do manual loads. how to rectify this problem, pl suggest me.
    thanks in advance
    venkat

    what's the exact error?
    Also Check :
    rsa1 error
    RSA1 error

  • Error BW  "ITAB_DUPLICATE_KEY"

    Hi, when downloading data in the RSA1 error occurs in the system
    Error in the ABAP Application Program                                                         |
    The current ABAP program "SAPLRSAODS" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    An entry was to be entered into the table
    "\FUNCTION=RSAR_ODS_GET\DATA=L_TH_ISOSMAP" (which should have
    had a unique table key (UNIQUE KEY)).
    However, there already existed a line with an identical key.
    The insert-operation could have ocurred as a result of an INSERT- or
    MOVE command, or in conjunction with a SELECT ... INTO.
    The statement "INSERT INITIAL LINE ..." cannot be used to insert several
    |     initial lines into a table with a unique key.     x
    Best Regards,
    EDRS

    Hi,
    Do you have the Logical System Name - TSPREFIX  in RSBASIDOC  ?
    1- Got to SE16 and enter table EDP21, take note to the entries.
    2- Go to WE20 and check whether Partner profile is missing in LS type regarding to EDP21 content.
    If there is any missing, just add Parnter profile with same and save.
    Partner profile Name: LOGBID001 (In your case)
    TYPE: LS
    Give:
    Ty: US
    User: User Name
    Lang: EN
    and Save.
    3- Again re-click on Partner Profile created.
    you will see ,there will be some entries in Inbound & out Bound Tabs.
    Delete the following from outbound:
    1.RSRQST
    Delete the following from inbound.
    1.RSINFO
    2.RSSEND
    and save your partner profile.
    3. now execute - RSA1, it will ask to active Workbench provide it and ReTry Again.
    Check also the Solution 5 in the Note 140276 - Error in source system assignment
    Thanks,
    Arjun

  • Runtime Error in BW, in RSA1 transaction

    Hello Boss,
    Iam getting runtime error while activating the info object in RSA1 transaction.
      I got OSS notes also from our basis consultant, plz give suggestion how to rectify this one.
      Even while executing the program iam getting runtime error.
      In this OSS notes they mentioned while u activating DSO u get this runtime error & solutions r given. iam not activating any DSO, activating info object. plz give ur suggestion.

    Hi,
            check in ST22 what exactly is message.. Ask basis to check server space and bg process.
    Abhi

  • Error while trying to access RSA1 in SAP NETWEAVER 2004 S

    HI friends,
                i am working on SAP NETWEAVER  2004s  and have created a few open hub destinations in this and when i tried to delete a  few , system is showing an error " Destination Type is not Supported"  when ever i am trying to access RSA1 .
               i will be glad if you could let me know how to overcome this,
    thanks and regards,
    sasdihar gunturu
    points will be awarded***

    Hi Gunturu,
    Do you know what sp level are you working with ?
    Here you´ll find a detail of sp level and his corrections, see the 22 page. Maybe that help you.
    https://websmp207.sap-ag.de/~sapidb/011000358700004483762006E
    Regards,
    Natalia.

  • CRM Interactive reporting, error while running RSA1

    Hello Experts,
    I had configured CRM 7 with BI 7 system for reporting. Now I am trying to implement CRM interactive reporting using a different client (as reporting client) of the same CRM system.
    While my CRM - BI scenario is working perfect, I am not able to configure the CRM interactive reporting using 2 different clients of the same system, When I am trying to run tx RSA1 from CRM reporting client, I get error "Logical system name has been changed".
    Can anyone help me in this?

    Hi Vicky,
    There must be some error in your logical system assignment.
    I request you to run these reports  Z_OLTP_CONFIG_CHECK ( In CRM Client ) and     Z_OLTP_CONFIG_CHECK_BI( Reporting Client) in order to resolve the errors. These reports will clearly point out the errors.
    Have a look at Note 1263075 - CRM Interactive Reporting Configuration Check for the reports.
    Regards...
    Arup

  • RSA1 going to shortdump, ERROR: Invalid GUI input data: Message no. 00123

    dear experts,
    while executing RSA1 going to short dump, ERROR: Invalid GUI input data: Message no. 00123 in sap-bi 7.0
    plz need help,
    regards.

    John,
    Those are the specs of the Software Components, the backend... As we mentioned before, download the latest SAPGUI version and install it in your PC...
    The latest SAPGUI can be downloaded from https://websmp204.sap-ag.de/support, go to Downloads, then "Browse the Navigation Area", on the left click "A-Z Index", then click on "G" and you'll see the "SAP GUI FOR WINDOWS" option, click on it...
    You can download it from here... Please notice your OSS user needs authorization to do so... Probably need to check with your Basis guys for this...
    Hope this helps.
    Luis

  • Error when creating SAP source-system in RSA1

    hi,
    we have a new bi-installation. the bi-system is running in the SAME system as our erp 2005-system is running.
    the bi-client is 700, our source-system (FI/CO) client is 101. I want to create a source-system in RSA1. at the end i get the following error message:
    <b>Name D01MAND700 of client 700 is not the same as the name D01MAND101 of the Warehouse
    Message no. R3225
    Diagnosis
    In order to guarantee error-free communication between the source system and the SAP Business Information Warehouse, the logical system names must be known to both.
    The system has established that the selected source system name D01MAND101 in the SAP Business Information Warehouse is not the same as the logical system name D01MAND700.
    System Response
    Processing has been terminated and all changes undone.
    Procedure
    Create the source system under the name D01MAND700 in the SAP Business Information Warehouse or change the logical system name for client 700 to D01MAND101 in the ALE customizing screen of the source system.
    Note that the logical system name for client 700 may already be being used for other ALE scenarios. If this is the case you are not able to change the name.</b>
    i don't understand this error ? is it because the BI-system and the erp-system is the SAME system ?
    reg, Martin

    mr. kapadia,
    there is one entry in table rsbasidoc, and it looks like that:
    SLOGSYS     D01MAND700                            
    RLOGSYS     D01MAND700                                                                               
    OBJSTAT     ACT                                   
    BIDOCTYP    ZSCA017                               
    TSIDOC3X    0                                     
    TSPREFIX    CA                                    
    SRCTYPE     M                                     
    SAPREL      700                                   
    TSTPNM      D78358                                
    TIMESTMP    20.070.622.093.042                    
    SBWBCRL     700                                   
    RBWBCRL     700                                   
    looks strange, right ? what should i do ? delete this entry ? how can i do this, it is a customizing table, i cant delete it via SE16 ?!?
    reg, Martin

  • Error in module RSQL of the datasource inter face + RSA1

    Hi All,
    We have installed a fresh BIW server on MSSQL database 2005. We have selected components like as ABAP.JAVA,EP,EP Core ,BI Java. While replicating the datasource  using tcode RSA1 from R/3 Retail Server we are getting an error Error in module RSQL of the datasource inter face .
    Details of Support package level-:
    SAP_ABA     700     0016     SAPKA70016     Cross-Application Component
    SAP_BASIS     700     0016     SAPKB70016     SAP Basis Component
    PI_BASIS     2006_1_700     0007     SAPKIPYM07     Basis Plug-In (PI_BASIS) 2006_1_700
    SAP_BW     700     0018     SAPKW70018     SAP NetWeaver BI 7.0
    BI_CONT     703     0008     SAPKIBIIP8     Business Intelligence Content
    Please suggest us the solution.
    Note: we are not getting any dump in st22. we have already checked the note 1162821
    Regards,
    Dushyant

    Thanks a lot ,we got the solution.
    Regards,
    Dushyant

  • Error in launching RSA1

    Hi,
    I have installed BIW 3.0 it got installed with clients 000,066 .
    I created user "test1"  in client 000 with all administration rights .When I try to launch RSA1 it gives the below error.
    Message no. BRAIN010
    Diagnosis
    Clients 000 and 066 are clients reserved by SAP. Therefore, it is not possible to work in these clients.
    Procedure
    IF you have not yet worked with the SAP BW then you should define another default client.
    If, however, you have already worked in client 000, then copy the client as described in OSS note 116520.
    I then created  client 800 copied from client 000 using SAP_ALL and created another user "test2" in it .When I try launching RSA1 from client 800 I get the below message.
    You must only work in Client 000
    Message no. BRAIN009
    Diagnosis
    Your SAP-BW System is working in client 000. If you work in another client, then the whole System will be destroyed.
    Procedure
    Please log on in client 000.
    I am in catch 22 situaltion am I going wrong somewhere during client creation or are the client profiles wrong somewhere?? Please advise ...
    Regards
    Arnab

    Hi.
    Currently I am working with SPM (Service Parts Management) solution.
    I had the same problem described above and now I can execute transaction RSA1 but I have a question:
    In my screen appears the following data:
    DataSource (OSOA) 9ADP01
    does not exist in BI system
    How do you want to create the object in BI?
    a) as DataSource (RSDS)
    b) as 3x DataSource (ISFS)
    c) this and following 12 as datasource (RSDS)
    d) this and following 12 as 3x Datasource (ISFS)
    What Option do I need to choose or what does (a, b, c & d) mean?
    Thanks in Advance.

  • In  RSA1 transaction, I written SELECT QUERY while compile It shows error

    Hi All,
                   While compile my SELECT query in RSA1 trans, ENDROUTINE, It show error...
                Select single MAX( date )
                         from dbtable
                         into W_DATE
                        where DOC_NUMBER = w_itab-DOC_NUMBER
                          and S_ORD_ITEM = w_itab-S_ORD_ITEM
                          and Plant     = 'number'.
    ERROR
    E:Unknown column name " date ". not determined until runtime, you
    cannot specify a field list.
    help me please
    reward

    Hi,
    make sure the column 'date' exists in your dbtable. If that is the case, you may be need to take out the spaces in ( date ).
    regards
    Siggi

  • Program Error in accessing RSA1

    Hi!
    I just finished installing SAP NetweaverS for BI7 system with SP level 9 on these components:
    ABAP, Basis, PI_Basis, BW and SP Level 2 for components ST-PI and BI_Cont.
    After Supp pack update, I run tcode RSA1 to access BW Workbench but
    unfortunately I get this error:
    Syntax error in program "SAPLRSAC ".
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLRSAS" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "SAPLRSAC " in include
    "CL_RSBC_FILTER================CU " in
    line 94:
    "Method "IF_RSBK_TPL_OPTIONAL~MERGE_VERSION" is not declared or inherit"
    "ed in class "CL_RSBC_FILTER" - - - - - - - - - - -"
    The include has been created and last changed by:
    Created by: "SAP "
    Last changed by: "SAP "
    The Error is rather too many to be placed here so if you need the complete log kindly give me where I could sent the whole data.
    Appreciate your immediate response.
    regards,
    Monico

    Hi Monica,
    Sounds like my favourite OSS note, 957823 or 967505.
    Cheers,
    Pom

Maybe you are looking for