RSA1 the existing RFC description does not corr. to that of the source syst

Hi,
I have installed SCM and installing SCM best practices.
When I execute RSA1 the message:
"The existing RFC description does not corr. to that of the source system" appears and it is not possible to enter the transaction.
I checked RFCs and authorization, everythink seems to be OK.
Any suggestions.
Best regards
Marty

Thaks Somnath,
RFCUSER is setup in RSCUSTA.
I checked the RFC test autorization, conncetion and remote logon.
It's ok.
Best regards
Martial

Similar Messages

The Dreamweaver client version does not match this version of the BrowserLab client

Cannot use BrowserLab
I have followed the upgrade instructions on this page
http://labs.adobe.com/downloads/browserlab.html
Deleted the MeerMeerDW folder, downloaded and installed the latest MXP files.
But when I try to use BrowserLab from Dreamweaver after program loads error message says
"The Dreamweaver client version does not match this version of the BrowserLab client.
Please download and install the latest version of the Dreamweaver MXPs"
I have tried several times, even tried removing the extensions from Extension Manager, quiting the program,
deleting the MeerMeerDW folder, restarting Extension Manager and reinstalling the MXPs, then starting Dreamweaver
and trying the Preview in Browser>Adobe BrowserLab. Same problem, program loads and then get error message.
Macintosh OS 10.5.8
Dreamweaver CS4
Extension Manager CS4 (2.1.115)

Hello toni7,
I'm sorry to hear you're having problems. Are you prompted to replace the existing extensions when performing the installation? The error message you are receiving when using the service is expected if the new versions of the extensions are not installed.
What is the version number of the extensions displayed in Extension Manager?
Are you deleting the MeerMeerDW folder in the user library prior to installing the new version of the extensions? And just to be sure, are you logged in as the same user? [(user)\Library\Application Support\Adobe\CS4ServiceManager\extensions\MeerMeerDW]
Do you have more than one MeerMeerDW folder at the path above?
Also, be sure that all adobe applications are closed before trying to install the new extensions. I would also make sure that CS4ServiceManager, Extension Manager and Dreamweaver are not running when you delete the MeerMeerDW folder and prior to installing the updated extensions. Go to Applications\Utilities\Activity Monitor and Quit Process on any of those three running prior to installing.
It's critical that the MeerMeerDW folder is manually deleted, rather than removed using Extension Manager before updating the extensions.
Best regards,
Corey

The tag handler gridcolumn does not have a setter for the attribute autoExpand specified in the Tag Library Descriptor.

I recently moved from coldfusion 8 to coldfusion 9 but all the pages with cfgrid: is throwing the following error. Any suggestion would be of great help
coldfusion.jsp.JRunTagLibraryInfo$NoSuchAttributeException: The tag handler gridcolumn does not have a setter for the attribute autoExpand specified in the Tag Library Descriptor.
at coldfusion.jsp.JRunTagLibraryInfo.getPropertyType(JRunTagLibraryInfo.java:627)
at coldfusion.jsp.JRunTagLibraryInfo.buildTagInfo(JRunTagLibraryInfo.java:585)
at coldfusion.jsp.JRunTagLibraryInfo.getTag(JRunTagLibraryInfo.java:267)
at coldfusion.compiler.NeoTranslationContext.findTagName(NeoTranslationContext.java:346)
at coldfusion.compiler.NeoTranslationContext.isKnownTag(NeoTranslationContext.java:222)
at coldfusion.compiler.CFMLParserBase.isKnownTagName(CFMLParserBase.java:589)
at coldfusion.compiler.cfml40TokenManager.TokenLexicalActions(cfml40TokenManager.java:6704)
at coldfusion.compiler.cfml40TokenManager.getNextToken(cfml40TokenManager.java:6586)
at coldfusion.compiler.cfml40.getToken(cfml40.java:11879)
at coldfusion.compiler.CFMLParserBase.isTrivialAngleBracket(CFMLParserBase.java:707)
at coldfusion.compiler.cfml40.jj_3_1(cfml40.java:9392)
at coldfusion.compiler.cfml40.jj_3_2(cfml40.java:9460)
at coldfusion.compiler.cfml40.jj_3R_67(cfml40.java:9500)
at coldfusion.compiler.cfml40.jj_3_86(cfml40.java:8147)
at coldfusion.compiler.cfml40.jj_3R_92(cfml40.java:8584)
at coldfusion.compiler.cfml40.jj_3_85(cfml40.java:8641)
at coldfusion.compiler.cfml40.jj_2_85(cfml40.java:7619)
at coldfusion.compiler.cfml40.cfml(cfml40.java:4215)
at coldfusion.compiler.cfml40.cfif(cfml40.java:311)
at coldfusion.compiler.cfml40.cfml(cfml40.java:4224)
at coldfusion.compiler.cfml40.cfif(cfml40.java:311)
at coldfusion.compiler.cfml40.cfml(cfml40.java:4224)
at coldfusion.compiler.cfml40.cfelse(cfml40.java:442)
at coldfusion.compiler.cfml40.cfelseif(cfml40.java:374)
at coldfusion.compiler.cfml40.cfif(cfml40.java:314)
at coldfusion.compiler.cfml40.cfml(cfml40.java:4224)
at coldfusion.compiler.cfml40.start(cfml40.java:4664)
at coldfusion.compiler.NeoTranslator.parsePage(NeoTranslator.java:667)
at coldfusion.compiler.NeoTranslator.parsePage(NeoTranslator.java:648)
at coldfusion.compiler.NeoTranslator.parseAndTransform(NeoTranslator.java:401)
at coldfusion.compiler.NeoTranslator.translateJava(NeoTranslator.java:343)
at coldfusion.compiler.NeoTranslator.translateJava(NeoTranslator.java:144)
at coldfusion.runtime.TemplateClassLoader$TemplateCache$1.fetch(TemplateClassLoader.java:418 )
at coldfusion.util.LruCache.get(LruCache.java:180)
at coldfusion.runtime.TemplateClassLoader$TemplateCache.fetchSerial(TemplateClassLoader.java :362)
at coldfusion.util.AbstractCache.fetch(AbstractCache.java:58)
at coldfusion.util.SoftCache.get_statsOff(SoftCache.java:133)
at coldfusion.util.SoftCache.get(SoftCache.java:81)
at coldfusion.runtime.TemplateClassLoader.findClass(TemplateClassLoader.java:591)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:80)
at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70)
at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46)
at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:53)
at coldfusion.CfmServlet.service(CfmServlet.java:201)
at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

Thanks Vishu,
We are running Coldfusion 9 and attach is the sample code and error message.:
The tag handler gridcolumn does not have a setter for the attribute autoExpand specified in the Tag Library Descriptor.
The CFML compiler was processing:
A cfgrid tag beginning on line 39, column 18.
The error occurred in E:/Websites/DreData/sobrietytesting/main/Sobrietytesting/Admin/view_users.cfm: line 54
52 :                     hrefkey="member_id"
53 :                     bind="cfc:tabledisplay.browseAccessAcountRequests(,,,)"
54 :                     >
55 :

Hi i am have had a lot of trouble emptying my trash. when i go to put something in there it asks from my password and the item goes off the screen, but this does not clear any space on the hard drive.

Hi i am have had a lot of trouble emptying my trash. when i go to put something in there it asks from my password and the item goes off the screen, but this does not clear any space on the hard drive.

1. Triple-click the line below to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu. An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.

When I am on a Youtube video that is running and I want to switch to another tab, the Ctrl+ tab number does not work, is that intended functionality?

When I am on a Youtube video that is running and I want to switch to another tab, the Ctrl+<tab number> does not work, is that intended functionality?

This can happen when the video player (Flash plugin) has the focus.
In that case the plugin consumes all the key presses.
You will have to click with the mouse elsewhere on the page or in the user interface to make keyboard shortcuts work.

Front page opens works shortly freezes. only yellow green buttons work. I click yellow to minimize normal top bar menu appears I choose new page, opens works normally. The restart saved tabs does not work on that first page.

front page opens works shortly freezes.
only yellow green buttons work. I click yellow to minimize normal top bar menu appears I choose new page, opens works normally.
The restart saved tabs does not work on that first page.

Hi @prdstudio3 ,
Thank you for visiting the HP Support Forums. The Serial Number needed to be removed from your Post. This is From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

Mac user, OSX 10.9.4. CS6, in the new Blur gallery the pin with adjusters does not appear for any of the three blur filters. This may have occurred since taking adobe watermark add-on and updating Bridge. any ideas?

Mac user, OSX 10.9.4. CS6, in the new Blur gallery the pin with adjusters does not appear for any of the three blur filters. This may have occurred since taking adobe watermark add-on and updating Bridge. any ideas?

I am using Mac OSX 10.10.1 (memory 8 GB 1600 MHz DDR3, graphics Nvidia GeForce GT 650M 1024 MB)
and my version of Photoshop is CC.
I ran into the same problem: I am able to place and view Blur Gallery pins but the adjustment wheel or outer control arounf the pin that allows you to tweak the blur value disappeared after being initially available. Additionally, the placed pin or pins appear to flicker on screen (while in blur gallery mode) until committing the change with the OK button. I have tried restarting both the computer and Photoshop, as well as what some other users have suggested such as View>Show>Edit pins turned on. Nothing has helped so far. I am still able to adjust the blur amount from the Blur Tools slider. thank you.

When using panasonic remote2 app, videos shot on iPad appear upside down on the television. This does not happen with videos from other sources. Any suggestions?

When using panasonic remote2 app, videos shot on iPad appear upside down on the television. This does not happen with videos from other sources. Any suggestions?

Hi Steve
worldweary wrote:
Thanks again. I tried channel 13 and it seemed to work better, with less dropouts (albeit not perfect) but sadly my slightly ageing laptop wouldn't recognise the network at all with the Hub set to that channel, so I had to switch it back to 11!
Will try the factory reset at some point to see if that improves things.
I have the same issue with my iPad when streaming videos...like the issue posted on ‎25-04-2014 18h36 by Steve.
Steve - Can you kinldy clarify how you resolved the problem finally.
I was infact planning to change the iPad or sell it off due to this recurring problem.
Thanks and regards
Siva

I created a script to add logos to photos at a club and now when I run the script, the script runs but does not actually place anything on the photo itself. What's going on?

I created a script to add logos to photos at a club and now when I run the script, the script runs but does not actually place anything on the photo itself. What's going on?

He meant post it here, of course, Louie! How on Earth would you post it "on Photoshop" ?
Thank you for the belly laugh.

I have an iPod and an Ipad and want to use FaceTime calling from the iPod to the Ipad but it does not work. I use the same iCloud acount.

I have an iPod and an Ipad and want to use FaceTime calling from the iPod to the Ipad but it does not work. I use the same iCloud accountedge

Did you set up different email addresses for each device?
iOS: Using FaceTime
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems

When I turn on my ipad2 the volume box appears and does not go away until i hit the volume button on the side and the increase volume button does not seem to funtion only the lower section does?

I need help. I got an ipad 2 for Christmas and the volume box appears every time I turn it on and it won't go away until I hit the side volume button. I also realized that the upper portion of the volume key does not seem to work properly. Any solutions?

i face totally similar problem so i think its a software flaw. but mine got on quite a long time.
what should i do, i dun like going to the store in exchange for a refurb one

HT204266 Iphone 5 The power down button does not power down it locks the keys how do I make that go to power down?

My iPhone 5 power down button does not power down it sounds like its taking a picture the locks everything up. The power down button and the home button. I want to smash this phone!!

hello WallyWalsh, if this warning is showing up you might have to reset the homepage to the version that is used in firefox 4 & above (the old homepage will show the warning you have referenced). to change it go to firefox > tools > options > general & reset the homepage to the default (that's '''about:home''').
to set up sync between your pc and the tablet, go to ''firefox > tools > sync'' & create a sync account - for detailed information about it please refer to [[How do I set up Firefox Sync?]]

Is it possible to load pictures directly from your computer to your ipad. When I loaded the camera pictures onto the computer, re ordered them and fixed some, I then tried to move them to the ipad. It does not allow me to paste the copied file.

Is it possible to load pictures from a computer to your ipad. When modified my camera pictures and reordered them, I was unable to load them to the ipad. I could copy but not paste. If I reinstalled them on the memory card, the ipad did not recognize them.

The iPad can be pretty picky.
One way, if you sync your iPad to your computer, is to use iTunes to 'sync' the photos onto the iPad. Of course that has the downside of if you sync them on you have to use iTunes to sync them off.
Or you can download the iCloud control panel and use photostream to put the photos onto your iPad. WHen you install the iCloud panel and enable photo stream it'll put a folder on your computer. Import photos into that folder and they'll go onto your iPad (they do transfer via wifi so it's not exactly an instant thing, might take a few minutes depending on your network and file size.
Or, if you have a few, you can e-mail them to yourself, open that mail on your ipad and save them from there.
Or, to use the camera kit, you can import htem onto your iPad, but the camera connection kit requires a very specific naming protocol. There must be a folder named DCIM on your memory card, and then all files on that card must be in that folder and have a name of 8 characters. If you follow the naming convention, once you plug the memory card in the iPad will see it and allow you to import the photos.
there are also third party photo apps I just dont' have any to recommend.
One more thing to bear in mind, even if you rename the files, the ipad persists in organizing the photos by date, so I'd experiment and make sure it doesn't totally rearrange your files before you spend a lot of time on it. (third party apps may respect the name of the photo and organize it that way rather than by date first, then name)

I have a new ipad and I am trying to set it up thru my itunes account. I opened itunes and connected the ipad but itunes does not seem to be recognizing the ipad. Can someone please advise? Thank you.

I tried to register my ipad thru the Apple website but it won't let me register because I do not have the exact purchase date. This was a gift and I do not know the exact date. So frustrating because I am excited and anxious to use my new ipad!

Try making up a date. something relatively recent. See if that allows you to go forward

The "save as" option does not show up when selecting the "file" selection

Recently installed OS X 10.9.2 When using Numbers the "Save As" option no longer is displayed under "File". The help screen indicates that it should. Any suggestions?

AS,
Thte Save As... command is an optional command in the File menu. To reveal this command, press the Option/Alt key while viewing the File menu.
Jerry

RSA1 the existing RFC description does not corr. to that of the source syst

Similar Messages

Maybe you are looking for