RSA1 with Enterprise portal

Hi people,
I have a problem when I enter the transaction RSA1 and I want to launch a planning area to jump through the portal and the message in Internet Explorer is that it can not find the page requested. The page to which I was going http://host.domain:8000 .What can i do?
In the enterprise portal I have found Deploy and change label, and there are diferents templates for deploy. In on of them I need to put:
HTTP port of ABAP server:
HTTP port of Message server
How can i know?
More thanks

Solved myself.
The problem was that jco connections are not created. I created them and restart sld and works.

Similar Messages

SAP BW Bex 7.3 Queries not working with Enterprise Portal (EP) 7.3 ABAP stack only

SAP BW Bex 7.3 Queries not working with Enterprise Portal (EP) 7.3 ABAP Stack
Dear Portal Gurus,
we want to integrate SAP BW Bex Queries 7.3 into an Enterprise Portal 7.3 EP ABAP Stack only installation.
1) We have Done SSO between EP And BI System
2) System Object is Created
3) When we trying to create Iview of BEX 7.3 report, its executing that report on BI server, we don't have java stack on BI System
4) We have updated the required table in Bi system for executing the report on EP
5) RFC is OK, System Object Test is OK, Report is working independently from Business Explorer, but not working from EP
There no irj services available on BI system, as it is only ABAP stack.
Can anybody help us in achieving our requirement
Thanks in advance
Michael Wecker

Hi Michael,
To integrate portal with BI you need to perform BI Portal integration steps.
Refer to a document link below for guidance purpose.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a?overridelayout=t…
Ensure that you have performed all these relevant steps.
Hope this helps.
Regards,
Deepak Kori

Process flow - Active Directory integration with Enterprise Portal

Hi
I have seen number of documents/forum discussions on integrating Microsoft Active Directory (LDAP) with Enterprise Portal, but unable to find out the process flow for achieving the same.
I have installed Enterprise Portal 6 (SP13) running on Web AS 640 (J2EE Standalone). The UME is currently configured to use Java database. (i.e datasourceconfiguration_database_only.xml)
I intend to proceed as below for integrating with Active Directory and integrate with Windows authentication:
1) Configure UME to use an LDAP Server as Data Source using Config Tool
http://help.sap.com/saphelp_erp2004/helpdata/en/cc/cdd93f130f9115e10000000a155106/frameset.htm
2) Configure Enterprise Portal UME i.e http://<host name>:50000/irj - System Administration - System Configuration - UM Configuration
<b>Should I configure Data Sources & LDAP Server here as I have already configured these using J2EE Config tool (point no.1).</b>
3) Integrate Windows authentication with EP using IISProxy module.
I hope the above will enable me to logon to Portal without supplying username and password once you are logged on to the PC using your Windows user name and password.
Also, any schema updates required to Activie Directory i.e What additional data is stored in A.D.
I would appreciate your guidance on this.
Thanks in advance,
Chandu

Hi Chandau,
you wanted that some users are not taken into account by the User Management Engine (UME).
This behavior can be established by specifying the
ume.ldap.negative_user_filter property for the LDAP data sources in the data source configuration file. Using this property one can define that all users and accounts that
match the defined conditions are filtered out by the UME API.
A detailed documentation can be found in the SAP Online Help:
http://help.sap.com/saphelp_nw04/helpdata/en/9a/f43541b9cc4c0de10000000a1550b0/
content.htm
In the following example of a data source configuration file for Microsoft Active Directory
Server the attribute userPrincipalName is used as Logon ID of a portal user id (j_user).
Here the user accounts that have one of the following Logon IDs (index_service,
notificator_service and cmadmin_service ) are filtered out.
<dataSources>
</dataSource>
<dataSource id="CORP_LDAP">
<privateSection>
<ume.ldap.negative_user_filter>
userPrincipalName=[index_service,notificator_service,cmadmin_service]
</ume.ldap.negative_user_filter>
</privateSection>
</dataSource>
</dataSources>

Integration of BO reports with Enterprise portal

How can i integrate BO reports with Enterprise Portal.

Jude, have you done this already. This is because i have checked the files for IK but it's not too specific on things like configuring the system for BO in SAP EP or where to do the things. I am stuck on configuring the area of the visor for the system that will connect to BO i already typed the domain url to leave it able to SSO but no for the visor. If anyone knows how to do this.

Configuring Standalone Proxy with Enterprise Portal Application

Hi All,
I am attempting to set up a standalone proxy DC for use inside of an enterprise portal application DC (deployable). I successfully created the standalone proxy and I created an API public part as well as an SDA public part, both of which contain all of the classes from the standalone proxy. In my deployable portal application, I have included both of these public parts in the Used DCs. At compilation, everything is fine, and NWDS recognizes the API and does not give any errors with references to the proxy classes while coding or building the application. However, after deploying and running the application, I receive a NoClassDefFound error for the proxy classes at runtime. I have worked with using APIs/SDAs a lot in other types of DCs (EARs, WebDynpro, etc.), and simply including the SDA as part of the used DCs has always worked fairly simply, however I am still relatively new to using Portal Application DCs, so I am not sure if I am doing something incorrectly in this situation. Any light you could shed on the situation would be a great help. Thanks.

Hello-
I believe you need to do the following. In your standalone DC, create two public parts, one for compiliationand one for assembly (the two radio buttons on the first screen when you create public part wizard).
Then in your PAR Standalone DC, reference both public parts as used DCs. The jar file from the Standalone Proxy DC will be packaged into the EP Build results and deployed with the PAR file.
Let me know if this works for you.
Thanks,
Marty

Urgent !!! - 'Advance with Dialog' option with Enterprise Portal - Reg

Hi Gurus,
I have the following requirement. My system is Ecc 6.0 When the user rejects an expenses report, he/she needs to put the comments for which i have a custom method to pop-up a box for entering the comments. I have this task with 'Advance with Dialog' option. This works fine. But, when the workitem is executed through Enterprise Portal, the 'Advance with Dialog' option is not working and the user is receiving a separate witem(after refreshing his UWL) for this task. This is not what i want.
Can anybody tell me how to do it, IF it is POSSIBLE.
I went through SDN and found Raja sekhar's blog below where it was told this option is not available as in Dec, 2005.
I was just wondering if anybody can tell if this option still doesn't work in E.P ?
If not, can you tell me anyother way to get this functionality work. I need some pop-up for entering the reasons for rejection.
See below for the blog that i referred to :
Advance with Dialog - is not working in E.P.
As this is very urgent, your immediate response is highly appreciated and rewarded.
Thanks in advance,
venu

Hi Venu,
the later versions UWL supports a property called UserDecisionNote for the UserDecisionHandler action: http://help.sap.com/saphelp_nw2004s/helpdata/en/7a/df014b037141ca9afc6433ed42b519/frameset.htm
With this functionality, you can achieve what you need (= UWL asks for the rejection reason immediately after clicking on Reject).
Hope this helps,
Mikko

How can I integrate Visual Composer applications with enterprise portal

Hello All,
I have a requirement to show BI reports built from webapplicaoins and Visual Composer to present on the Enterprise Portal 7.0
Can anybody suggest me the procedure to do the same.
Thanks

Hi Agarwal
When you create and deploy a VC application, the deployed iView/s are automatically created in the portal under the folder that you have specified (in VC Tools> Compiler options>portal deployment), or by default under Content Administration>Portal Content>Visual Composer folder.
Check this for your BI, VC and Portal requirement:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad182ac7-0a01-0010-4fb8-8a4d217b19c1">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad182ac7-0a01-0010-4fb8-8a4d217b19c1</a>
You can then use these iViews with your role, page, etc.
Manoj

Integrating Oracle 10GAS with Enterprise Portal

Has anyone ever hooked up Oracle 10GAS to the Enterprise Portal as a portlet?
We are looking into integrating a warehousing application into our EP 6.0 SP2 portal. This is a custom warehousing application based on Oracle forms using Oracle Application Server that we use in concert with our core R/3 system. We are considering use of the portal as a "front door" and are looking for some information / guidance on whether there might be existing content or frameworks to enable this integration. We are also interested in how single sign-on might be accomplished with this product.

We still have a few openings for talks directed towards DBAs.
Please email me directly if you are interested in participation.
Thanks,
I. Michael Snyder
President, MAOP
[email protected]
www.maop.org
Atlantic Oracle Training Conference
Leveraging Your Oracle Investment
December 8 - 9, 2005
George Washington University
Cafritz Conference Center
Washington, DC

Web Based Application Single Sign on With Enterprise Portal

Good day Developers,
My question is really a two part question so forgive me in advance for asking in one post as I think they are relative to each other. My project is currently exlporing the creation of functionality that will allow the following:
1. We want to allow a secure Web Based application possessing the abilitiy to auithenticate the user into Enterprise Portal and by passing the login screen to get to a landing page/iview in our Enterprise Portal instannce.
2. We want the abilitity to perform a check of the user and create the user in the enterprise portal on the fly if they do not already exist.
So far in my research I've come across tools and white papers mentioning the use rof oAuth and OpenID. Is that the right way to tackle these two items. Thanks for your help in advance.
JD

Hi
1. You can do SSO between you application and portal using Verisign or third party authentication tool. I am not pretty sure how landing page and all will work as you mentioned.
As portal is web based, you can deply your application in portal server. So that you will not need any other authentication tool.Also you can save effort , cost.
2. By deploying application in portal also you do not have to concentrate on User management, which is itself a huge effort you have to put. Else you can go for third party tools like Identity management or ADS.
-Yogesh

Error when configuring Web Dispatcher for SSL with Enterprise Portal

We are in the process of configuring the Web Dispatcher using SSL to connect to our Enterprise Portal (the Web Dispatcher will be in the DMZ). We have followed all of the help.sap.com guides and now have SSL listening on the EP side (port 8103). We are now receiving this strange certificate error when we start the Web Dispatcher:
[Thr 5332] Tue Mar 20 00:36:23 2007
[Thr 5332]   MatchTargetName("<FULLY QUALIFIED HOSTNAME>", "CN=XXX, OU=XXX, O=XXXX, C=XX") FAILS
[Thr 5332]   SSL socket: local=<IPADDRESS>:4742 peer=<IPADDRESS>:8103
[Thr 5332] <<- ERROR: SapSSLSessionStart(sssl_hdl=009D7670)==SSSLERR_SERVER_CERT_MISMATCH
[Thr 5332] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-30): SSSLERR_SERVER_CERT_MISMATCH [icxxconn.c 2005]
[Thr 5332] *** ERROR => IcmConnClientRqCreate() failed (rc=-14) [icrxx.c      4919]
[Thr 5332] *** ERROR => Could not connect to SAP Message Server at <FULLY QUALIFIED HOST NAME>. URL=/msgserver/text/logon?version=1.2 [icrxx.c      2301]
[Thr 5332] *** ERROR => rc=-1, HTTP response code: 0 [icrxx.c      2302]
[Thr 5332] *** ERROR => see also OSS note 552286 [icrxx.c      2303]
We have gone through the trouble shooting note 552286 as listed in the error above. Any assistance is appreciated.

Hello, did you receive any resolution for this problem? We are receiving a similar error and I am unsure of how to resolve.

Problem with Enterprise Portal

Hi SAP gurus,
I am having a peculiar problem with my E-portal.
The system is up and running and when i check through jcmon, all my processes are running OK.
When i go the portal link, the login page also opens(sometimes immediately/sometimes takes a bit of time).
However, when i try to login with any user ID or j2ee_admin/admininstrator,it takes ages.
I have found some errors in /usr/sap/DP1/JC06/j2ee/cluster/server0/log/system/.
#1.#005056852BFA0020000000A100006A0500048BD06E067656#1279627222218#/System/Server#sap.com/irj#com.sap.portal.prt.runtime.broker#Guest#0##n/a##4cf09f8093f611dfb766005056852bfa#SAPEngine_Application_Thread[impl:3]_17##0#0#Error#1#/System/Server#Plain###[PortalServiceItem.startServices] service initialisation failed:com.sap.ip.bi.web.unifiedrendering|mainservice#
#1.#005056852BFA0020000000A300006A0500048BD06E069373#1279627222225#/System/Server#sap.com/irj#com.sap.portal.prt.runtime.broker#Guest#0##n/a##4cf09f8093f611dfb766005056852bfa#SAPEngine_Application_Thread[impl:3]_17##0#0#Error#1#/System/Server#Plain###[PortalServiceItem.startServices] service initialisation failed:com.sap.ip.bi.webdynpro.alv.pdf|exportpdfservice#
#1.#005056852BFA00280000001200006A0500048BD07D750118#1279627481121#/System/Server#sap.com/tcmonitoringsysteminfo#com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer#Guest#0##n/a##d87b207093f611df9096005056852bfa#SAPEngine_Application_Thread[impl:3]_14##0#0#Error#1#com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer#Plain###application [sap/monitoring] Cannot parse JSP /CrashesList.jsp
The error is: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingException: Error while executing the compilation process: [/usr/sap/DP1/JC06/j2ee/cluster/server0/apps/sap.com/tcmonitoringsysteminfo/servlet_jsp/sap/monitoring/work/jsp_CrashesList1279627480225.java:253: processName is already defined in _jspService(javax.servlet.http.HttpServletRequest,javax.servlet.http.HttpServletResponse)
                String processName = request.getParameter("processName");
                       ^
1 error
Exception id: [005056852BFA00280000001100006A0500048BD07D74FF7E]#
security.0.log:
#1.#005056852BFA00280000009600006A0500048BD0F98EF80B#1279629563197#/System/Security/Audit/J2EE#sap.com/irj#com.sap.engine.services.security.resource.audit#Guest#0##n/a##d311609093fb11df8ee6005056852bfa#SAPEngine_Application_Thread[impl:3]_14##0#0#Error#1#com.sap.engine.services.security.resource.audit#Java###ACCESS.ERROR: Authorization check for caller assignment to J2EE resource [ : : : ].#4#keystore-view.TicketKeystore#entry-actions#READ_ENTRY#ALL#
I am not quite getting if these are the reasons of the problem.
If anybody has faced this issue, kindly help.
Regards,
Santosh Bhat

I did a research of this issue, and I found a know issue on portal 7.0 SP16 that this message throws. The solution on this case is upgrade your system to sp17.
Your exception also say that your string "String processName = request.getParameter("processName");" Already exist before. so maybe this can be caused also for some custom code, this is a pssibility?
jsp_CrashesList1279627480225.java:253: processName is already defined in _jspService(javax.servlet.http.HttpServletRequest,javax.servlet.http.HttpServletResponse).
Just to let you know the error of the know issue I referred is exacly:
The error is:
com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingExce
ption: Error while executing the compilation process:
[D:/usr/sap/HGE/JC04/j2ee/cluster/server0/apps/sap.com/tcmonitoringsys
teminfo/servlet_jsp/sap/monitoring/work/jsp_CrashesList1222431016884.jav
a:253: processName is already defined in _jspService
(javax.servlet.http.HttpServletRequest,javax.servlet.http.HttpServletRes
ponse)
#String processName = request.getParameter
("processName");
What I can recomend you is:
1) If you are on SP16, please evaluate upgrade your system to sp17.
2) Make suren this issue are not caused for any custom code.
3) try to go to last path level for the componente that are available on Market Place:
Obs: Just remember that Paths is not a a SP level, so has just corrections.
For Example:
For EP-PSERV component access:
http://service.sap.com/swdc >>
support packages >>
Support Packages and Patches - Entry by Application Group
SAP NetWeaver and complementary products
SAP NETWEAVER>
SAP NETWEAVER 7.0
Entry by component >>
EP Core
PORTAL 7.00
EPPSERV18P_8-10003474.SCA
For EPBC component access:
http://service.sap.com/swdc >>
support packages >>
Support Packages and Patches - Entry by Application Group
SAP NetWeaver and complementary products
SAP NETWEAVER>
SAP NETWEAVER 7.0
Entry by component >>
EP Core
PORTAL CORE SERVICES 7.00
EPBC18P_3-10003473.SCA
For EPBC2 component access:
http://service.sap.com/swdc >>
support packages >>
Support Packages and Patches - Entry by Application Group
SAP NetWeaver and complementary products
SAP NETWEAVER>
SAP NETWEAVER 7.0
Entry by component >>
EP Core
PORTAL FRAMEWORK 7.00
EPBC218P_4-10003489.SCA
Regards,
Fabio

Support Desk Integration with Enterprise Portal

Hi Experts,
We have a scenario to Implement Service desk with portal.
can any buddy tell me the procedure to achieve this scenario.
thanks in advance.
BK

Hi
Are you taking about web based service desk
this is standard called workcenters in solution manager
https://websmp210.sap-ag.de/~sapdownload/011000358700000776062009E/Howto_ServiceDesk.pdf
https://websmp210.sap-ag.de/~sapdownload/011000358700000150572007E/How_to_use_IC_WebClient.pdf
Regards
Prakhar

Multiple Userbase with Enterprise Portal

Hello Xperts,
We have a requirement where we need different users to be stored at 2 different location (LDAP and Portal database)
I am not sure if this is possible or not.
If anyone has any idea, please share it with me.
Appreciate your response.
-Ashutosh

Hi Ashutosh,
You can configure the UME to use a read-only LDAP. Then any new users you add from the user admin UI will be added to the database of the AS Java. You then have to manage your LDAP users with the LDAP tools. If you have the LDAP as read-write, you are going to have to add any users you need in the database before you configure the LDAP as data source.
-Michael

Integration with Enterprise Portal and Cognos System

Hi Gurus,
I want to display the report from Cognos System, but i want to take up the Snapshot of the report in backend and while in displaying in Portal an image of the particular report should be displayed, what's the report running.
If anyone tell how to get the snapshot.If anycoding block , that more helpful to me.
Awaiting for the reply..
Best Regards
Ganesh

Hi Ram,
One of the ways to do it is described in the following blog:
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1334 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Regards,
Sridhar

Scheduled Crystal Report with Enterprise Portal

Hi all,
I want to Schedule that Crystal Report which is retrieving data from EXCEL. For that I have followed the following Steps.
Login into CMCApp.
Select the required rpt file and clicked the Schedule.
It opens the Schedule Screen.
In that I have specified the Recurrence Parameter as Hourly. Every 5 min the data is updated and Scheduled For as administrator.
Initially the portal display the saved data in the crystal report. If I click the refresh button manually, then only it displays the updated Data.
The status of object is Success, while seeing the History of the Object. If I click the View Latest Instance in CMCApp, It shows the updated data(Refreshed Data).
Whether I am following the Correct Steps? Other than this What I have to do for scheduling?
How can I retrieve the data from View Latest Instance? Is it possible? or by default Portal displays the saved data ?
Help me in this regard
Thanks & regards,
Hemalatha J

Hi all,
I have referred the following link.
[Creating Crystal Report iViews |http://help.sap.com/saphelp_nw04/helpdata/en/36/d4a94076b63713e10000000a155106/content.htm]
I have given view type as Last Instance.
But still it display the old data. But in view latest instance of InfoView displays the latest data.
What may be the problem?
Thanks & Regards,
Hemalatha J

RSA1 with Enterprise portal

Similar Messages

Maybe you are looking for