RSA3: error occured during extraction hierarchy
Hi,
I have created 2 sets using tcode cxsa, ZAAA and ZBBB. Table that used for this set is FIMC and the field is RBUNIT. After that, i create generic hierarchy datasource using tcode BW07, enter the table name and field,then execute (custom data source with name 'ZFIECCS_HIER_CONS_UNIT' created). I don't use option 'Hierarchies of Sets with Compounding' here.
After that i try to use tcode RSA3, enter the datasource = ZFIECCS_HIER_CONS_UNIT, enter HIENAME = ZAAA or ZBBB but i get message error 'Error occured during extraction'.
I try to debug this extractor and find error happen in FM GSBH_HIERARCHY_TRANSFER_SETS, this happen because i_s_hiebas-hclass <> i_s_hiersel-hclass.
Then i try to execute program RSA1HCAT using tcode SE38. I enter my datasource and execute. I found that ZAAA and ZBBB not in list of hierarchy that can be accessed.
Anyone can help my problem?
Regards,
Satria Budiman
Hi,
Go to RSA6 and see if data source is using the correct version or not.you can select the data source and click on chek option on the top and see if its any error.
If it is dump then there is no other option but to retransport it again.
try to see if the extract struture used by this data source is active or not??
See if you are getting the error in the test systems also or not.
Issue could be with the reallignment also where a controlling master data is changed.
Thanks
Ajeet
Similar Messages
-
Errors occured during extraction at RSA3
hi
i am giving these datasource and get data at rsa3, its giving error like error occured during extractions?
can u please let me know what could be the reason?
0CO_PC_PCP_03
0CO_PC_PCP_04Hi,
Check the Log in RSA3, youca n find log and see it and correct it.
Steps:
1. Inastall DS in RSA5
2. Check in RSA6.
3. Extract in RSA3.
Thanks
Reddy -
ERRORS OCCURED DURING EXTRACTION USING RSA3
Dear Folks,
I have an error in production client & that is when i am doing test extraction for standard datasource using RSA3 i am geting following error:ERRORS OCCURED DURING EXTRACTION.
I checked the log and message is extraction program failed as it is called by an invalid infosource or object 0crm_lead_h.
note:0crm_lead_h is the DS
Any help
ThanksHi ,
Please follow below thread , it will solve ur problem.
Errors occurred during the extraction, Message nos. RJ012 & R3009
Hope this will help you...
Thanks,
Jitendra -
0PM_PRM_PLCS_1 error occured during extraction
Dear gurus ,
i have make entry im pm_c05 table and extract the data first time ,it works fine .when i again try to load data it give me error .i have checked in rsa3 and while extraction it is giving error " Error occured during extraction " . our bi is is on 7.0 and erp 0n ehp 6.4 .i have implemented the sap note 0001243299 but again gettinng the same error.please help me outHi Faisal:
I've found a long list of SAP Notes that might be applicable to your environment, even though it is not mandatory to implement all of them to solve the issue you're facing right now, please consider the convenience of installing them on your system to fix some potential problems in advance.
Note 1344048 - "0PM_PRM_PLCS_1: Delta upload does not work as expected"
Note 1285238 - "0PM_PRM_PLCS_1: Errors during extraction, poor performance"
Note 1323965 - "0PM_PRM_PLCS_1: Calculation for services"
Note 1338093 - "0PM_PRM_PLCS_1: Execution factor not taken into account"
Note 1339189 - "0PM_PRM_PLCS_1: Error occurs for alternative indicator"
Note 1340188 - "0PM_PRM_PLCS_1: Revision of the calculation module"
Note 1312783 - "0PM_PRM_PLCS_1: Implementing additional fields"
Note 1314158 - "0PM_PRM_PLCS_1: Incorrect result during extraction"
Note 1356256 - "0PM_PRM_PLCS_1: Poor system performance with strategy plans"
Note 1416214 - "Overlap of records due to key constraints in 0PM_DS07"
Note 1446484 - "Planned costs, costing, ECP: Incorrect message KI 217"
Note 1508442 - "ECP, extractor 0PM_PRM_PLCS_1: error ME024 or ME025"
Regards,
Francisco Milán. -
Error occured during extraction from APO to BI 7.0
Hi Experts,
I am in the process of extracting data from SCM(APO-Demand Planning) to BI .I have selected the relevant planning area 9ADP01 and given Generate Export DS in APO system and replicated the same in BI.But before scheduling the InfoPackage,when i checked for the DS 9A0APO_DP_ORDERANALYTICS_1,it displays "Error occured during extraction".I do have a doubt whether I should activate the DS in RSA5 before replication (but am not able to find the DS under DP in RSA5)
I have checked the forums but solutions mentioned did not resolve my issue.
Thanks,
MeeraHi,
The issue is resolved...
Regards,
Meera -
Errors occurred during extraction of the existing UDC Connect sources
HI ALL,
I try to create a DataSource with UD Connect on BW 3.5,
i choose a RFC destination, but after of to choose UD connect source appear the next error message "Errors occurred during extraction of the existing UDC Connect sources".
The RFC destination is OK.
In the CCMS Monitor the Java Connectors and Enterprise Java Beans are available.
Help me please!
regards!Hi, me again, I change some parameters and now is working but wrong!!!!! when I try to select a UD connect, in the match code i get the next list:
6B偡浡彏啔䐠#############
#########彏啔###########
#############偡浡彏啔偡浡彏啔
please if anyone knows what is going on help me...!!
tnx -
Errors occurred during extraction of UD Connect object field- table not fou
Hi,
In BI 7.0 system I can't select any UD Connect source object on the "Extraction" tab page of the DataSource maitenance screen. If I type the table name (which is "UDITEST") into it and then hit the "Proposal" tab page, I get the following error:
Errors occurred during extraction of UD Connect object field-list: Errors occurred during extraction of UD Connect object field-list: UDCADAPTERROR::RSSDK|200|Table: uditest not found|
Message no. RSDS_ACCESS036
Analysis:
1) We have tested the BI JDBC Connector using the URL:
http://xxxabcdev03:50000/TestJDBC_Web/TestJDBCPage.jsp
We got the list of tables displayed (UDITEST table is also displayed)=> connector is configured properly.
2) When we are trying to configure the Source system in rsa1->modelling->source systems-> UD connect -> create,
a) RFC Destination: We are using an RFC Connection that is already in place of type 'T' between the J2EE engine and BI ABAP engine. We tested this connection from SM59 -> TCP/IP connections and it is working fine.
How do we test whether the RFC between J2EE engine and BI ABAP engine is a 2 way RFC connection?
b) Logical System Name: We have manually typed in free text 'UDC_local'. Could you please clarify do we need to type in manually or select the logical system name from the F4 help?
Which logical system name should we enter here exactly.. pls clarify.
Do we have a seperate logical system name for the J2EE server...?
c) Type of Connector : JDBC
d) name of connector: SDK_JDBC
e) Source system name: SDK_JDBC
f) Type and Release : blank
Thanks to any answers in advance!
Best regards,
SyamHi,
Tried to give the Logical System Name in uppercase ie: UDC_LOCAL.
Now, when I click on the F4 of 'UD Connect Source Object' in Extraction tab, I get the message as below:
"Extraction of existing UD Connect data source objects".
But no list of tables is being displayed. When I entered the table name (UDITEST) manually, it gives the same error as :
" Errors occurred during extraction of UD Connect object field- table not found"...
Could you please specify from where is the UD Conenct source object fetched from?
Rgds
Syam -
Hi-
I am trying to activate Data Source 0FI_AP_50, however, I noticed on the BW side when I tried to pull in data nothing would come back. I stated tracing backwards and looked at Extraction via RSA3 in source system. At that time I received the error: "Errors occurred during the extraction" Message no. RJ012. The data source is active and data is available in the corresponding tables.
Any suggestions?
Thanks,
MarkHi Mark,
Unfortunately I do not have SAP_ALL in my system for me. But as far as I remember you should follow below path:
Goto Tcode SFW5:
Expand second node - scroll down and choose ENTERPRISE_BUSINESS_FUNCTIONS - FIN_REP_SIMPL_1 - Reporting Financials - check it and Activate changes
Then you might have to relogin again.
One more important thing: try this in Development System only first. Also really important to contact your FI team for impact analysis.
As far as I know these business functions are not possible to revert back
Thanks
Amit -
Error occured during extraction
Hello Experts,
I am using datasource 0HR_PY_PP_1 to load data into DSO 0PY_PP_C1.while loading data into DSO, I was getting error.
When I checked data in extractor for 0HR_PY_PP_1, I got error messange "Errors occurred during the extraction"
what would be an issue? do i need to do any setup before extracting data from extractor.
Regards,
Nirav ShahHI,
Actually the data source you are talking about have some functional intricacies concerned with it , so if you could go through the below link for more information on it.
[http://sap.ittoolbox.com/groups/technical-functional/sap-bw/extraction-error-for-0hr_py_pp_1-1376478]
Check weather a valid source system exist for the concerned extractor RSA13 (Monitor icon), try replicating the data source again for the possible error conditions include specification of DataSources unavailable in the source system and changes in the DataSource setup or the extraction process that have not yet been replicated to the SAP BW system.
Extractor checker will only let you check for the extraction of specific values in rsa3, try reactivating the extractor or check "For the short dump error if any" may be there is an "Enhancement of data source " while the extractor is not properly activated.
Hope this will be expedite.
Thax & Regards
Vaibhave Sharma -
Errors occurred during extraction
Dear Friends,
I have Multiprovider "Sales Margin Multi-Provider New Requirement- ZZRT_C01", which gets data from "Article- ZZRT_C01" and "Store/Article/Day - Sales Margin- ZZRPA_C01".
The corresponding data source for ZZRPA_C01 is "0RT_PA_TRAN_CONTROL", when checked for data from the extractor checker using tcode RSA3 gives message "Errors occurred during the extraction".
What could be the cause of the same and how do we correct the same.
Is this failure the cause of incorrect data in the data target? If not what is the cause & How do we correct the same?
All suggestion is welcome.
KSDear All,
There is note in the SAP.help.com which say for 0PRA_C01:
The volume of data is very high for data retention at store/article/day level. We recommend that you restrict your data retention period to a maximum of three months.
How do we retain data for the period mentioned above?
Is it thru datatarget archieving?
If No
Do we move the data from the day level to week level than to the month level, and then delete the data after three months at the day level datatarget?
Also is the error due to data retained in the datatarget fro more then 3 months?
All answers are welcome!!!
K S -
Hi All,
i am activate the bussiness content RSA5 : 0job_attr & ojob_text, but check in RSA6 warning error occur. check the data in RSA6 found : Errors occurred during the extraction.
Check in log found that :The application program for the extraction of data was called up using
the invalid InfoSource/invalid InfoObject 0JOB_ATTR.
another error i am found : shortext medium text longtext non maintain language 'E'
Regards
PriyaHi,
This problem is relted to HR Module ?
RSA6 Delete the object. Again go to RSA5 bussiness content select 0JOB_ATTR ;> transfer datasource. before goto RSA5 , inform to the Functional consultant they maintain the shortext medium text longtext non maintain language 'E' for 0JOB_ATTR. becuse DE is maintain for the object before.
Regards
Sangram sutar -
Error occurred during extraction in r/3 ( loans data sources)
Hi,
for Data source 0CML_Delta
Iam getting 0 records when i check the extraction checker in RSA3. i have used Delta Update mode.
Even in BI it shows 0 records for delta load.
i have done the change pointer activation and even updated the dynamic infosource as suggested in SDN threads.
but still shows 0 records.
For full load iam getting 'Error During Extraction'.
Is there any specfic procedure to follow for this?
Can any one suggest me the correct procedure?
regardsHi
Try Extracting data in debugging mode and check whether there is nay data getting filled in the tables. If not then probably check out the logic written once again,it is also possible that there may be no new data.
Regards
Raj -
Errors occured during extraction - Production issue
Hi Friends,
I have a production issue occured last night and I was hoping, I would get some help around this issue...
Two extractor loads failed last night with short dumps..I see Total column in RSA7 has numbers in it.But when I display the record, it is leading to a short dump.Both extractors are standard extractors.
2LIS_02_SGR and 2LIS_03_UM.I tried with RSA3, it also failed.
MESSAGE_TYPE_X and code SY 097
This is message in the short dump
Module LRSC2U01
Select TID block from STATE table
SELECT * INTO TABLE L_T_STATE
FROM ARFCSSTATE FOR ALL ENTRIES IN L_TH_TID_IDX
WHERE ARFCIPID EQ L_TH_TID_IDX-TID-ARFCIPID
AND ARFCPID EQ L_TH_TID_IDX-TID-ARFCPID
AND ARFCTIME EQ L_TH_TID_IDX-TID-ARFCTIME
AND ARFCTIDCNT EQ L_TH_TID_IDX-TID-ARFCTIDCNT
ORDER BY PRIMARY KEY.
Consistence check
DESCRIBE TABLE L_T_STATE LINES L_LINES.
IF L_LINES NE L_BLOCK_SIZE OR
L_LINES EQ 0.
MESSAGE X097(SY). <=== Error Here
ENDIF.
Thanks
PriyaAfter debugging the standard extractor's source code, found out that In the internal table of 2LIS_03_UM, an entry was made from 2LIS_02_SGR Extractor and Internal Table for 2LIS_02_SGR extractor, an entry was made from 2LIS_03_UM .
The issue occurred last night because both Transactions were made at the same time and all other primary key fields has same entries and these are the fields the code is executing on.
Basically ARFCSSTATE has duplicate entries on First 4 fields of the table, where as the actual data is only for one record and there is a mismatch while reading internal table which is leading to the short dumps
Ex: In RSA7 has 20 entries and ARFCSSTATE has 21 records( One entry is a duplicate record from the other extractor)
Does anyone encountered this kind of problem before?
Thanks
Priya -
Errors occurred during the extraction for CFM data sources in RSA3
Hi Friends,
When i try to execute the datasource's in Extractor Checker (RSA3) using the datasources given below:
0CFM_DELTA_POSITIONS
0CFM_INIT_POSITIONS
I'm getting the error message saying that "Errors occurred during the extraction"
This is my frist error and the the second error what i'm having is:
When i try to execute the the datasources given below:
0CFM_RDB_AN_1
0CFM_RDB_AN_2
0CFM_RDB_AN_3
0CFM_RDB_AN_4
0CFM_RDB_AN_5
0CFM_RDB_AN_6
It is asking "Portfolio Hierarchy" in RSA3 selections, even though i've activated portfolio hierarchy, i can't able to get that hierarchy in Extractor Checker Selections (RSA3), unless i get that hierarchy, i can't be able to excute any datasource in extractor checker.
Awaiting for your inputs with curiousity.
Thanx in advance,
BalajiReddyHave a look at the following OSS Notes :
1029605
808387
995660
594272 -
"Errors occurred during the extraction" when run RSA3 of EBP datasource 0DO
"Errors occurred during the extraction" when run RSA3 of EBP datasource 0DOC_NUMBER_ATTR.
What would be the reason and how to resolve this problem?
ThanksHi Kevin,
Generally the installed DS also comes under RSA5 nodes, not only in RSA6.
Have you activated it earlier before extraction?
If DS is already active, please try to follow all the steps once more, and check, and let us know if still the same error comes.
Cheers!!!!!!!!!!!
Maybe you are looking for
-
Welcome to the Meego & Maemo board
Welcome to the board dedicated to all things Meego (&Maemo)! This section is meant for discussing Nokia products such as the Nokia N9 and N900. Here you can meet other owners of these phones from around the world and discuss using and troubleshooting
-
Error: [..\..Src\Time.cpp-105]
Using Procoder 3: I used: MPEG2 - DVD - NTSC (mastering quality) preset. I have two files m2v and .wave that I tried to import into Encore CS3. It does not like my video. I get this error: Adobe Encore has encountered an error. [..\..Src\Time.cpp-105
-
ABAP code for custom OLAP variables
Hi experts, We have a custom variant set as customer exit that I have just added to an infopackge for the data selection of 0FISCYEAR infoobject via 7-OLAP Variant. When I click on the magnifying glass under the "details for Type" column, the "Use Va
-
Com.sapportals.portal.prt.service.soap.SOAPRuntimeContext
Is there any class like com.sapportals.portal.prt.service.soap.SOAPRuntimeContext (which only works in the context of the portal) that can be used from an EJB environment? Basically, from inside an EJB, I want to get the authenticated IUser object th
-
How to imbed image from XPAAJ into PDF livecycle form
We are having a very hard time trying to add an image to a dynamic XML PDF created in livecycle Designer 8. Basically we have a letter document and we are importing data into the PDF as XML. We need to insert an image of the users signature to appear