RSA3 - Zfield not populating with data.In debugging data is there in BADI

Hello,
Added a new Z field to datasource 0CRM_SRV_PROCESS_H.
Everything Activated in RSA6 and everything is fine.
Code writeen in BADI CRM_BWA_MFLOW.We checked while debugging the field is getting populated when we modified the internal table CT_DATA data.
But when we run the RSA3 and check the data the field is there but data is not coming and its coming is blank.
Everything checked and it looks fine.Request response if someone can guide the reason or the cause that is missed out.
Thanks,
Rahul

Hi,
Please check if OSS 692195 helps.
-Vikram

Similar Messages

A&B schemas are not populated with data after successfull deployment in BCC

Hi all,
Initially I'm able to up the site with the data in my catalog schemas(A & B), But all of sudden the data is deleted in both schemas after performing full deployment and
the data is not populated.
From then, even If I do incremental deployment the data is not populated in targeting schemas. Please suggest me where I've done the mistake.
Please help as soon as possible.
Thanks,
Kushal.
Edited by: 916721 on Jun 5, 2012 11:23 AM

Check the publishing (CA) and production (target) server logs when you start the deployment after setting loggingDebug as true for the following components through dyn/admin.
on CA Server:
/atg/epub/DeploymentServer
on Target site:
/atg/epub/DeploymentAgent
/atg/deployment/DeploymentManager
/atg/commerce/catalog/ProductCatalog_production or /atg/commerce/catalog/ProductCatalog_staging/ (depending upon your configuration)
See if you can find any exception or other error from debug logs.

Infocube and ODS populated with DATA (need to add one more field?)

Hi,
If infocube and ODS have been populated with data for past 3 months. Then we need to add one more field to this cube. What is the impact? Please advise.
The following is my understanding. Please correct me if I am wrong.
1) Need to delete content of ODS and infocube.
2) insert the new field at ODS and infocube.
3) reload the data into ODS and infocube.
Is there a way that the current data need not be deleted.
Just add in this new field and only subsequent month, infocube will have this new field? Please advise what is the best approach without affecting existing data.

Hi,
Siggi is right. You dont need to delete the previously loaded data to CUBE or ODS. The only catch is that, your new field will be empty as far as history is concerned. But so long as you did map it to the datasource and the datasource is able to fill it up, then your new field will now have value for incoming DELTA Updates.
Addition of a field is not that complicated compared to deletion of a field from CUBE or ODS.
--Jkyle

Keynote document saved in icloud not updating with data from Numbers? is icloud the problem

keynote document saved in icloud not updating with data from Numbers? is icloud the problem.
If both files are held locally on the computer it looks like there is no problem however if you try and do it though icloud (ie your docs are saved on icloud) you dont get the "source" oprion besides the graph etc. Is this a but or a broken function due to the new implementation of icloud.

Hi sebnor31,
This is Visual C# forum, but your question seems not related to Visual C# language itself. It most likely related to the bluetooth message transaction protocal or with the device itself.
I'll move your question to [where is this forum for...] forum where the morderator may direct you to the correct forum.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Savevid and keepvid are not working with os 10.7.3-Is there a fix?

savevid and keepvid are not working with os 10.7.3-Is there a fix?
Is anyone else having this problem?

A massive thanks from me too after discovering the problem when I started work this morning at 2.30am - not something you need that time of day! Did exactly as written and bingo, missing tool icons appeared BUT, and there's always a but...
I have THE SAME problem in Quark with some of the static areas in the measurement (F9) bar. Can anyone suggest what might fix this? I have restarted just ONCE after turning on Extension Manager at start-up.
Hardware:
Apple Macintosh MacPro 2x2GHz Dual-Core Intel Xeon
RAM: 6Gb (667MHz DDR2 FB-DIMM)
HDD's (internal): 1x160Gb / 1x500Gb / 2x1500Gb
Software (OS)
OS: Mac OS 10.7.3 (updated to this 06.02.2012)
Problem software: QuarkXPress 8.5
Thanks in advance for any advice / help...
Paul

I used to use SpeedBit Video Downloader with Mozilla Firefox, but suddenly a problem happened, I can not download with it now at all as there is an code error appears in the bar of SpeedBit like "XML Parsing Error: unclosed token Location: chrome://browse

I used to use SpeedBit Video Downloader with Mozilla Firefox, but suddenly a problem happened, I can not download with it now at all as there is an code error appears in the bar of SpeedBit like "XML Parsing Error: unclosed token Location: chrome://browser/content/browser.xul Line Number 1, column 8702:....................."
I did evrey thing, but the same problem
reinstall SpeedBit, reinstall Mozilla Firefox.
So what can I do!
== This happened ==
Every time Firefox opened
== 4 days ago

look people, i may have a solution for this. This happened to me a few times before and resolved alone, but last time it happened was when i turned off my router and back on while my comp was running and appeared when i tried opening firefox after that. so wat i did was i shutdown the computer and the router and tried turning both on again, and it resolved.
Therefore, Summary: Shutdown computer then turnoff router then turn both back on
Hope this helps anyone.

HT1338 My G5 PowerPC still works great, but what is the latest OS that is possible. I just bought a new HP Printer and it is not compatible with OS 10.4. Is there any hope?

My G5 PowerPC still works great, but what is the latest OS that is possible. I just bought a new HP Printer and it is not compatible with OS 10.4. Is there any hope?

A PPC G5 cannot run any version of OS X beyond Leopard 10.5.8.
You should be able to find a Leopard retail (black) install disk on eBay. A grey update disk is machine specific and won't work.

A 305- S6825 will not start with the battery and charger. There's no light, no noise on fan or HDD

PC will not start with the battery and charger. There's no light, no noise on fan, hard drive and CD writer. The hard drive, fan and charger are new. But I was havingproblems and sudden blackouts System 32. Try several times to install theoperating system but the pc turned off suddenly and restarted until I stop working completely. Now it does nothing and no light. I hope it can help me I need torespect and love very much this notebook.
Thanks in advance
Jose Echevarria
[email protected]

Turn off your laptop, unplug all wires, remove the battery, and hold the power button for thirty seconds. Afterwards, reattach the battery and connections. If it still won't start, remove the battery and start with just the AC power. Next try without the AC power and just the battery.
- Peter

Data not populating with the Lookup code

Hi All,
Currently I am facing the problem in Production. Somebody has written the below ABAP code in Field routine.
While loading transaction data, they was a lookup in the field routine to get data from Master data.
Select /BIC/YOTLT_TYP INTO RESULT
FROM /BIC/PZCUSTSLS
WHERE /BIC/ZCUSTSLS = SOURCE_FIELDS-KUNAG
and distr_chan =
SOURCE_FIELDS-VTWEG
and division = SOURCE_FIELDS-SPART and salesorg =
SOURCE_FIELDS-VKORG.
ENDSELECT.
But data is not picking properly with the above ABAP Code. Even though the data in the field KUNAG and Info object ZCUSTSLS is same, it is not picking the correct data.
Can you please help why the info object /BIC/YOTLT_TYP is not getting correct data?
Please suggest.
Thanks.

hi,
Check, is there any syntax error for above code ?
if not try below code :
Select single /BIC/YOTLT_TYP INTO RESULT
FROM /BIC/PZCUSTSLS
WHERE /BIC/ZCUSTSLS = SOURCE_FIELDS-KUNAG
          and distr_chan = SOURCE_FIELDS-VTWEG
          and division = SOURCE_FIELDS-SPART
          and salesorg = SOURCE_FIELDS-VKORG.
Thank-You.
Regards,
VB

Checkbox item renderer populated with data from 2 sources

I have a list object that has a check box and a label (using an inline item renderer). The list itself is populated with an array of objects and whether the checkbox is selected takes those objects and adds them to another list (for outbound purposes). Since the selected list can change elsewhere in my app how do I keep the binding of selections consistent? The dataprovider for my checkbox list is the first array of objects and is binded, but the second one (selected array) is not. What would be the best way to provide that binding to make sure the selected is consistent when the second array changes. Some of the code is below to better show...
<cms:HilightList
     id = "distributorList"
     width = "100%"
     height = "100%"
     drawHighlight="{ViewUtils.drawHighlightIndicator}"
     drawSelection="{ViewUtils.drawHighlightIndicator}"
     dataProvider="{pmDistributors.distributors}">
     <mx:itemRenderer>
          <mx:Component>
               <mx:HBox>
                    <mx:CheckBox
                                       selected = "{outerDocument.isSelected(data)}"
                           change = "{outerDocument.handleSelectedChange(event)}"/>
                    <mx:Label text="{data.name}"/>
               </mx:HBox>
          </mx:Component>
     </mx:itemRenderer>
</cms:HilightList>
public function isSelected(item:Object):Boolean
     var partner:Partner = item as Partner;
     var selected:Boolean = false;
     for each(var schedPartner:Partner in scheduleAssets.partners)
          if(schedPartner.id == partner.id)
               selected = true;
     return selected;
public function handleSelectedChange(event:Event):void
     var partner:Partner = event.currentTarget.parent.data as Partner;
          if(event.currentTarget.selected)
               addPartnerEvent(partner);
          } else {
               removePartnerEvent(partner);

Hi Aakcse,
In this condition, you need to make use of both the Precedence Constraint between Control Flow Tasks and the Conditional Split Transformation. Supposing you get the value in the flat file and store it in a variable via Script Task, you can create two Data
Flow Tasks, and connect the Script Task to the two DFTs.
For the Precedence Constraint between the Script Task and the Data Flow Task 1, set the “Expression and Constraint” expression to @[User::vEntryStatus]=="Y". And for the Precedence Constraint between the Script Task and the Data Flow Task 2, set the “Expression
and Constraint” expression to @[User::vEntryStatus]=="N".
In Data Flow Task 1, add a Conditional Split Transformation with this expression [Entry]==”YES”, and direct this output to the destination component. In Data Flow Task 2, also add a Conditional Split Transformation with expression [Entry]==”NO”, and direct
the output to the destination component.
Regards,
Mike Yin
If you have any feedback on our support, please click here
Mike Yin
TechNet Community Support

Datagrid itemrenderer list rowcount not changing with data

I have a datagrid with an itemrenderer. the itemrenderer is a list component. I populate the list with different values for each datagrid row. this works fine. However, I want the list to reset the rowcount for each datagrid row. This is not happening. if the first datagrid row list box is 3 rows every list box in that column is 3 rows no matter what i do. here's my code:
<mx:List xmlns:mx="http://www.adobe.com/2006/mxml" rowCount="1">
<mx:Script>
<![CDATA[
   import mx.utils.ObjectProxy;
   import mx.collections.ArrayCollection;
   import mx.utils.ArrayUtil;
   [Bindable] private var arr:Array;
   override public function set data( value:Object ) : void
    super.data = value;
    if(value != null && value.MEET is ArrayCollection)
     var len:Number = value.MEET.length;
     arr = new Array();
     for each (var obj:ObjectProxy in value.MEET){
      arr.push(obj.DAYS);
     this.dataProvider = arr;
     //labelField = "DAYS";
     this.rowCount = len;
    else if (value != null && value.MEET is ObjectProxy )
     this.rowCount = 1;
     this.dataProvider = value.MEET;
     this.labelField = "DAYS";
    else
     this.rowCount = 1;
]]>
</mx:Script>
</mx:List>

Hello !
This trick makes my application freeze...
I've just an advancedDatagrid populated with arrays, and a list as renderer on some of its columns... I've got exactly the same problem (rowCount that is always the same, for all of my renderers instances), but your solution doesn't work it out...
Any idea ?
thanks a lot

Can Not Remove "with" Data from Calendar Event Details

I currently have a Palm Tungsten|E2. For a short time I used to sync it with my work computer; this was before they replaced the computer (lease was up) with a new one where it was locked down and I could not reinstall the Palm desktop. Since then I have been syncing it with my home computer that runs MS Vista. Just recently I have noticed that when I create new Calendar events on my Palm, they all get a new "With:" data line (and a user from my old job) after sync'ing with my home computer. Selecting this "With:" entry brings me to a screen that allows me to select from a list of people I may "Done", "Reply", or "Reply All" to; although selecting either reply only causes a fatal error that requires a soft reset (button on back of machine). Looking at the event through the desktop software shows no data point so that it may be cleaned.
I would like to know why my desktop software is adding this person to a "With:" data point to all new entires I create on the Palm hardware, how do I turn it off and keep it from doing it in the future.
Steve
Post relates to: Tungsten E2
This question was solved.
View Solution.

Are you sync'ing the new device to the same username in Palm Desktop as an older device?
If you are, this will cause problems on the new device. When you sync the device, it saves the device settings, 3rd party apps, preferences, etc. in the backup folder in the username folder on the PC. When you sync the new device it copies the contents of the backup folder for the old device to the new device. This will cause corruption in the settings for the new device thus causing erratic behavior of the new device.
The best way to preserve your data is to export the data in each category in Palm Desktop to a seperate folder on your PC.
Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
Make sure you select all for the range in the export window.
With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
Looks like you may need to hard reset your device and rename your backup folder. Go to http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887 and follow the directions to do a hard reset. Next before you hotsync your data back over you will need to rename your backup folder, to do that go here;
XP
C:\program files\palm or palm one\[hotsync username]\ and rename your backup
folder to backup.old
Vista
Start-->documents\Palm OS Desktop\[hotsync username]\ and rename your backup
folder to backup.old
Then hotsync to your current hotsync name and all your contacts, calendar,
tasks, and memos will come back over.
Show file extensions for XP or Vista
XP
If you can not view file extensions on your PC I would like you to open a
folder go to Tools-->Folder Options--> View (tab) and under show hidden
files and folders uncheck hide file extensions for known file types.
Vista
Open control Panel go to Folder Options--> View (tab) and under show hidden
files and folders uncheck hide file extensions for known file types.
Post relates to: Palm i705

Dashboard content is not populated with Planned Cost and Actual Cost

Hi
We are working in cProjects 4.0 + ECC 6.0 implementation. I could not get the data for columns in Planned Cost and Actual Cost in cProjects Project Dashboard. I have properly mapped the config settings and created and assigned a Project in PS
Has anybody got this data in the Dashboard?
Kindly suggest the solution
with regards,
K Rama Krishna
9394712743

Hi Rama,
It is difficult to say, where the problem is.
but typically, the causes of the problem are
customizing is set incorrectly or the evaluation is not carried out.
You can run the the evaluation DPR_EVE_BATCH_DPO additionally, please untick the flag 'check the last changed date'.
Hope, it helps.
Kind regards,
Zhenbo

Table in XMLP not populating with all rows

I am creating a letter template with a table using XMLP where a table should be populated with an employee's current benefit elections. An employee could have between one and three rows of data. For each employee I can get the first row of data to populate, but if they have more than one row it is populated on the next page causing one employee to have between one and three letters. Can anyone give me some advice as to how I can get all of the rows to populate on one employee's letter? Thanks!!

Have you forgotten how to [use code tags|http://forums.sun.com/thread.jspa?threadID=5231522]?
db

Podcast not downloading with dates

My new MBPro and iTouch ( 2+ years old) have the latest software. iTouch does not download podcasts with dates, so my podcasts show up on the iTouch in aphabetical order. When syncing the date of the iTouch podcast are all 12/30/00 in my Mac Book Pro.
When I download Podcasts on the MacBook Pro and sync with iTouch the dates are correct and the podcass are sorted by dates.
Please help - every night I have to

you can delete podcasts by swiping right to left over the podcast episode title.

RSA3 - Zfield not populating with data.In debugging data is there in BADI

Similar Messages

Maybe you are looking for