RSA5 busiibes  content data source data wen activated

hi dis is anil
my query is when we activate the bussiness conent datasource , in rsa5, the data source will be in ra6, so the activated datasource is having the data with it

Hi Sreeanil,
If it is FI extractors or generic then you can see data,
If it is LO extractors then you have to fill the setup tables.to get the data in TX : RSA3...
hope this will answer your question.
Thanks,
Vijay.
Edited by: vijay m on Jan 8, 2010 4:05 PM

Similar Messages

  • How adding a data source-data destination inside SSIS 2012-SSDT

    Hi,
    I need to see inside a SSIS 2012 project a new SSIS installed component but in the SSDT 2010 I cannot see the SSIS Data Flow Items tab for adding data source/data destination respect to the choose toolbox items pane:
    It seems a SSIS bug.
    Any helps to me, please?
    Thanks

    Hi,
    In SQL 2012 you are no longer required to manually pick the tasks and components you want to use. You have to select from the new custom SSIS Toolbox to use the additional components you need.
    SSIS Tasks Components Scripts Services | http://www.cozyroc.com/

  • Data source is not activated!!!!

    Hi Friends,
    Currently we are workig on BI 7.0 version and trying to upload flat file data. We have created Datasource for Flatfile source system and activated ( 100% sure about activation). But when we trying to give selections for the Fields in the infopackage screen it was saying the above said Datasource is not in Active version ( Even thoug that was activated properly).
    We are wondering about this in the data souce tree it was cleary showing as activated , but in the infopackage it was stating that is not activated.
    Please look into this one and give your valuable suggestions.
    Thanks in advance...

    Solved by own

  • Data Source to get activity type(ActTyp) for service orders.

    Hello friends..
    Could you please provide, with the data source, that can be used to derive activity types (ActTyp),for service orders.
    (Not maintenance activity type (PMACTTYP, in BI))  
    I have checked ZLIS_18_ORDER, where i could find (Maintenance activity type, ILART) but not Activity type.
    Or if we need to create a Genric DS for same, could you ppl please provide me with the table name, to get the Activity type.
    Thank you.
    Raghu

    Thank you Rajesh,
    Could you please lemme know, how can i pick this value, as there is no AUFNR (Order Num) in this table, so that i can pick up using order number.
    Thanks '
    Raghu

  • ODBC data source link to active directory

     Dears:  
        we have ready application using windows ODBC data source to link to active directory how we can do that in windows 7?

    This one may help with that.
    http://msdn.microsoft.com/en-us/library/windows/desktop/ms681571(v=vs.85).aspx
    Something here on Richard's site might also help.
    http://www.rlmueller.net/products.htm
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Data source not in active state in admin workbench in BIW

    Dear all,
    We had created a ZHR datasource  i our source,but when we replicate the same data source in our BW system it is coming in inactive state,can you pls tell what is the issue
    thanks

    Amarinder's comment is true, if it is within development system.
    But when u transport this datasouce from R/3 DEV to R/3 QA, after the replication into BI QA, U should again transport same datasource from BI DEV to BI QA.. Same applies to PRD too.

  • Data Sources , Data Providers to a Single WebI Report

    Hi Guru's ,
    I am a newbie..!!  I am going through the documents related to a creation of WebI Report and got to know that we can combine two or more data sources (or) two data providers(Queries) in creation of a single WebI Report . However,I am still confused with this incoming stuff for creating a WebI Report .
    Could some one explain me what type of combinations can give as an input for creating a WebI report ?
    For example, one can link two or more queries and create a single report by using merge dimension concept !! If so, Will WebI accept data coming from 2 different universes, data coming from 2 or more different data sources like SQL data and SAP ecc ?
    Please explain this as I am new to this !!

    Hi
    Common in the sense relevant data in the two objects with same data type.
    See chapter 24 in the attached pdf more on merge dimension and how it will work in webi.
    http://help.sap.com/businessobject/product_guides/boexir4/en/xi4sp4_ia_desktop_en.pdf

  • Forms clause query data source data block in oracle forms

    Hello experts,
                  I am new in oracle forms.I am using oracle forms 11g with weblogic 10.3.5 at windows 7.Through googaling I know how to create a database block,forms clause data block and stored procedure based datablock in oracle forms.I want to know that as in case of  Database based datablock, could we commit form either on editing records or on insertion or deletion in data block.
    I tried this but got error frm 40501.If we can perform editing and creation in such type of datablock then please tell me how.
    Thank You,
    regards
    aaditya

    When I base my datablock on a query using the "From Clause" property of the block query data source in the oracle Forms 6i,
    I get the strange error
    "ORA-00928: missing SELECT keyword"
    The query I see in the Display Error in Help Menu is
    SELECT DAY_NUMBER,CONSULTANT_ID,EVENT_ID,EVENT_NUMBER,SESSION_NUMBER,HOURS_UNPAID,HOURS_PAID,PAPERWORK FROM (EVENT_ASSIGNED_CONSULTANT) WHERE (CONSULTANT_ID=:1)
    What should I do now?????? Please remove the brackets () from the table name.
    Instead of (EVENT_ASSIGNED_CONSULTANT) use
    EVENT_ASSIGNED_CONSULTANT

  • COPA data source data type changed for BUKRS

    Hi Exp,
    I've created one copa data source with cost based successfully in R/3 system. I've replicated that into BI system bu the problem is for characteristic BUKRS [Company code] the data type showing REF in BI which is non existance and hence i'm unable to activate this data source.
    Coudl anyone plese help...........
    Thanks & Regards,
    Amarnath

    Hi Ramesh,
    Thanks for your reply. It is in internal format only. I changed it to external and selected ALPHA conversion also but it's of no use. I don't know why. Is it the error on BI side or R/3 side?
    Thanks & Regards,
    Amarnath

  • Data Source Data Block (REPORT) property. What for?

    Hi,
    I've seen this property in the report object, but I've never seen it used anywhere.
    It lets you chose one of your blocks, but I have no idea what use is this and online help doesn't help, as it goes with this description:
    For report/form integration, specifies the data block to be used as the source of the report as either Null or a block name.
    What is this for?

    Thanks, but, could you elaborate a bit?
    Supose I've got an emp tabular form. Then I have a report with this feature. What do I "see" from the report side?

  • Data source activated in RSA5 but error in RSA3

    Hi,
      I have activated data source 0CRM_OPPT_H in transaction RSA5 in our CRM system and can view this in RSA6. However when I run the extractor checker RSA3, the system generates error ( "Errors occurred during the extraction    Message no. RJ012").
      Upon debugging I found that this is caused by not having entry in table SMOXHEAD_S for this data source.
    Also when I go to transaction BWA1 I am not able to display this data source. Other master data sources that I activated earlier are working fine. Its the transaction data source 0CRM_OPPT_H or 0CRM_OPPT_I that are having issue.
      Please let me know any other steps that I may not be doing after activating the Business content data source in CRM system using transaction RSA5.
      Thanks
    Arunava

    Bhanu,
      Thanks again for your super fast reply. This really solved my issue.
      However for may days I have been trying to understand this BWA transaction ( BWA1 and BWA5) and figured out some fact( Like BWA5 puts the same entry of smxhead table to snmxhead_s table to make the whole thing work, Also we can extend the mapping in the BWA1 to include additional custom object with out the badi coding( is it possible?) .
      But this area still is a mystery and I would like to have a comprehensive article on this adapter layer and BDOC relationship. Is this possible for you to help here.
    I would really really appreciate.
    Thanks
    Arunava

  • Activation of Data sources RSA5 for PP

    Hi BW Gurus,
    I am Activating the Business content Data sources in RSA5 while activation i am getting errors for Master data 0Prodorder_attr and Text
    0workcenter_attr and text and hierarchy the data sources are not activating.
    It displays the error msg "Request/task QLTK901816 can only be changed in client 320"  currently i am working on 330 client for R3.
    Please provide the solution for this.
    Regards,
    Syed

    Hi Shahid,
    I think the transport request under which you are trying to capture the activated DS is in client 320. Create a new request in your current client (330) and provide this development class and transport request while activating. That should solve your problem. Hope it helps.
    Thanks and Regards
    Subray Hegde

  • Unbale to find data sources in RSA5.

    Hi there,
    I am unable to find the business content data sources in RSA5, but I can find the same data sources in RSA3 (extract checker).
    I need these data sources to be replicated to BW and take it up further.
    Any light on the above issue will be of great help.
    Thanks in advance.
    Regards.

    hi,
    user tcode rsa6 explode all the nodes and then used find icon to find your required data source. This tcode gives you the list of data source which are active.
    User tcode rsa5 to list out the data source which is delivered by sap.
    Hope this should helps!!!

  • Data Source 0HR_PA_0 Syntax Error in the start routine while activating

    Hi All,
    I have migrated the Business content for the data source 0HR_PA_0
    While activating the transformation-2 there is errors like:
    Start Routine: Syntax error in routine
    Rule (target: 0HDCNT_LAST, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0AGE_KYF, group: 01 Standard Group): Syntax error in routine
    .................... etc
    I need help to resolve this issue.
    Thanks & Regards,
    Savitha

    Hello Jurgita,
    When Data Source was migrated the codes related to COMM_STRUCTURE was missing in the start routinue.
    Following codes (in bold) with regard to COMM_STRUCTURE added and then got activated
    4.     *--
    5.         COMM_STRUCTURE   type tys_sc_1__rule_25,
    6.         l_subrc          type sy-tabix,
    7.         l_abort          type sy-tabix,
    8.         ls_monitor       TYPE rsmonitor,
    9.         ls_monitor_recno TYPE rsmonitors.
    10.     
    11.       REFRESH:
    12.         MONITOR.
    13.     
    14.     * Runtime attributs
    15.         SOURCE_SYSTEM  = p_r_request->get_logsys( ).
    16.         move-corresponding SOURCE_FIELDS to COMM_STRUCTURE.
    17.     
    18.     *  Migrated update rule call
    19.       Perform routine_0011
    20.       using
    21.         COMM_STRUCTURE
    22.       CHANGING
    Regards,
    Savitha
    Edited by: Savitha  Ravi on Jun 19, 2009 6:34 AM

  • Warning while activating data source 0BBP_TD_CONTR_2

    Hi Friends,
    We are installing some business content data source from SRM system and while activating the data source of purchasing contracts (0BBP_TD_CONTR_2) we are getting the below warning message
    "The even-numbered length of the DEC field PS_TH_AVAIL_AMT can lead to problems".
    We have checked the field PS_TH_AVAIL_AMT and found its having the length of 20. Also it seems to be an standard field its not allowing us to change the size
    Though we can consider its an warning we have received only 0 records in the extractor (RSA3) even  the data source is in active state in RSA6..  Data is not being fetched due to the above warnings?
    Please suggest and help us on this if someone have faced the similar kind of issue..
    Regards,
    Saravanan.M

    That warning not causing as of now.
    Ask your source team to maintain some data and later do the extraction at RSA3.
    But in future it may cause if your field PS_TH_AVAIL_AMT value  is more length than defined.
    So ask your source team and find what is the maximum length of that value going to use/enter at source side.AS i know source team may enter the value as per the limits. But if you fill that field thru any calculations that may causes you.
    Even there itself it mentioned SAP note. so please go thru that and use it in future if caused field PS_TH_AVAIL_AMT length.

Maybe you are looking for