Rsa5 datasources

hi
what is main use of 2lis_03_s832 and 2lis_07_s516

Hi Suneel,
Check below threads:
List of data sources and extract structures in LO
Diff. between Last Goods issue date and Last consumption date
Regards,
KK.

Similar Messages

  • RSA5 DataSource Activation

    Hi Experts,
      I was trying activation of 0TCTAUTH Datasource from rsa5.
    I clicked on it and pressed Activate Datasource.
    It got activated.I can see the records in rsa3.But when I replicate it, I cant see the Datasource in BW.
    Am i missing any step?
    Thanks,
    Senoy

    Hi
    http://help.sap.com/saphelp_nw70/helpdata/EN/43/5fc0680a876b7de10000000a422035/content.htm
    in Source System,
    1).RSA5 0TCTAUTH Datasource ACTIVATE the dataosurce.
    2).RSA6 which is post processing Data Sources,select 0TCTAUTH Datasource and press trasport button to release from source system.
    3)RSA3 which was extractor checkor to check the data
    In BW,
    1).Goto RSA1 >Select Source System>and say replicate meta data/data source --->> after you gets msgs states like
    all tree data structures are refreshed in bw.
    2)refresh the screen in BW side and i thk you can find the your 0TCTAUTH Datasource from source system .
    I think this will solve you.
    mahesh

  • ECC 5.0 / BI - RSA5 Datasources

    Hi,
    Can anybody please tell me the difference between datasources found on RSA5 on ECC side and on BI side.
    Thanks,
    JB

    Hi,
    Standard datasources available in RSA5, whatever required datasources first u will check in RSA6 of src system , if it is not there then u have to activate in RSA5.
    Replicate to BW after activating, these datasources u will assign to infosources.
    Best Regards,
    SG

  • Everything Blank in NRSA6 of QA environment.

    Hi All,
           We need to load all the data from R/3 QA dev to BW Dev, and we all the data sources in NRSA5 but in NRSA6 , there is nothing , everything is blank. Now If I'm trying to see all that I have in nrsa5(of QA) in Nrsa6 , what should I be doing??
    Thanks in advance.

    Hi Smily,
    RSA5 = Datasources delivered
    RSA6 = Datasources active in your system.
    If you see everything in RSA5 but nothing in RSA6, it means that they have not been activated. If this is the QA system, then we generally transport the datasources from Dev, rather than activating in QA.
    Hope this helps...

  • How to load hierarchies

    Hi sdn
    How we can load hierarchie in BW if customer had created new one in r/3 side
    related to cost centre
    I'm not able to find it out in rsa6 and rsa5 datasource for that hierarchy is we need to generate data source for the hierarchy
    rubane

    HI,
       to load hierachy if u do, not find the datasource go to
    rso2 create a datasouce with table/view name as hieracht table and save it
    now replicate it to bw.
    now u can create transformation bt source and target and load data.
    regards

  • 0MAT_VEND_ATTR

    Hi Gurus!
    Why I couldn't find in RSA5 DataSource 0MAT_VEND_ATTR? Your prompt reply will be greatly appreciated.
    Many thanks!

    Try expanding the following nodes in the same sequence ->
    RSA5 -> SAP - R/3 -> MM -> MM-IO and under this node you should be able to find the data source. If you dont have MM under SAP R/3, try transferring the application component hierarchy using the t-code RSA9. Hope this helps.

  • Error while trying to activate R/3 datasource from BI with T-Code rsa5

    hi all,
    i want to activate a particular datasource in R/3 through BI.iam following the below steps.
    RSA1-->source system>select source system>right click>connection parameters>remote logon>rsa5-select datasource.
    when iam trying to activate from rsa5 its giving error like "No valid application component hierarchy exists".when iam trying continue in next window its showing a tree "NONODESCONNECTED" and iam unable to see tree "SAP".
    actually am i following the right procedure, if not guide me. please guide me how to solve this issue.
    thanx&regards
    Vamshi D Krishna

    Hi Vamshi,
                    Just carry on with your dats source. Ignore warning messages.
    hope this will help you......
    Thanks,
    Vijay.
    Edited by: vijay m on Jun 8, 2009 6:45 PM

  • Unable to find the list of datasources in RSA5

    Hi All,
    I am not able to see the list of datasources in RSA5, Ours is a new system and we are in process of implementing the SD and MM modules.
    I wanted to activate the datasources related to SD and MM. When I went into t-code RSA5 I am getting a message  "No valid application component hierarchy exists".
    Can you please let me know how can I get the datasources in RSA5.
    Thanks,
    VC

    Yes, You will get the hierarchy. SBIW is the main program where in you can do many things related to data source.
    -- Pravin

  • In RSA5 I did not find 0BATCH  Datasource.

    Hi,
    I have a doubt in MM,
    In Material Master , Batch is there ,
    I want to know BATCH is a Master Data or not,
    If it is a master data, how to load this batch (0BATCH )
    In RSA5 I did not find any BC Datasource.
    Thank you

    Hi shaik,
    From RSD1 --> 0BATCH I do not see any flag for Master Data, so probably you do not have any DataSource.
    If you want to upload Atrributes or Text for this IO you must first check corresponding flag in RSD1 for this IO and then create your custom DataSource.
    Ciao.
    Riccardo.

  • Package Name while activating Datasource in RSA5

    Hi there, I want to know what Package Name or what to choose or how to create a package to transfer datasource from r3 to BW while activating Datasource in RSA5 for finance 0fi_gl_4 it ask for package name what to choose there. is that something basis team need to create to connect r3 to bw or I can create it as BI team
    please help
    Thanks
    soniya

    Hi:
    Package name is not to connect to BW. That is used for Transporting your daa sources from R/3 DEV --> R/3 QAS.
    To move Data Sources to BW, you call it Replication. Once you Activate Data Sources in R/3, go to BW, RSA1, Source Systems, select R/3 Source System, Replicate Data Sources. This will bring them to BW.
    You have to do the same in BW QAS AFTER you transport R/3 Data SOurces from R/3 DEV --> R/3 QAS.
    Coming to Packages in R/3, its just a grouping to move transports within R/3 System. Because the data sources are BW related, we usually have a package called ZBW. This is just a name, doesn't mean it moved them to BW.
    Ram C.
    Message was edited by: Ram Chamarthy
    Message was edited by: Ram Chamarthy

  • Component Hierarchy RSA9 and DataSources RSA5

    Hi Gurus,
    I'm a little confused about configuration of source system...
    In development ERP I have activated Component Hierarchy using RSA9 and also installed Business Content Extractors - RSA5 - All works fine.
    But Now I want to transfer this settings to the Quality Assurance ERP system and I do not know how... ?
    When transferring component hierarchy and installing datasource in dev system didn't ask me about transport request, I did not defined any requests for this operations... how can I transfer now all this settings to the other QA system??
    Looking forward for reply.
    I don't hesitate adding points

    I called the RSA9 again  - system asked "Transfer Component Hierarchy" i clicked "YES" and message appeared "The application component hierarchy was transferred from the Content". There was no chance to defined transport request.
    I rsa6 i have choosen exactly one datasource and then the button "Object directory". Window appeared with the package name and I pushed the button "Save" and also no chance to define TR. The window just disapeared

  • RSA5 active datasource,get this error switch to package ******* is off

    Hi, expert.
    When I use TCODE RSA5 to active datasource in R3,in the end I got this error:
    DataSource 0WBS_ELEMT_USR_ATTR; switch to package PS_IS_EHP3_SFWS_SC is off
    Message no. R8371
    my R3 and BW are the same client.
    I don't know how to correct it. PLZ help me, thank you very much.
    Edited by: Bruce Wang on Dec 22, 2009 9:36 AM

    Hi
    I think u need to install package related to EHP3.
    For more details :
    http://sap.ittoolbox.com/groups/technical-functional/sap-basis/installation-of-ehp3-3136634
    http://www.google.co.in/search?hl=en&q=EHP3inSAP+R%2F3&btnG=Search&meta=&aq=f&oq=
    Regards
    Ram.

  • Datasources in RSA5 & RSA6

    Hi 
    RSA5 & RSA6
    RSA5 is the place where are the Business Content (SAP Delivered) Data sources are available
    RSA6 is the Place where all the Activated Business Content, Enhanced & Generic Data Sources are available
    My understanding is If we Install and Activate a Business Content data sources then it will be available in RSA6u2026..
    I had a data source in RSA6 which is enhanced to include ZZ fieldsu2026
    But when I check the same data source in  RSA5 there also I can see the ZZ fields in the extract structure of the Data source
    Why is it appearing in RSA6 as well
    Thanks

    Thanks for all updates
    So if i enhance the delivery content data source after activation in RSA6.....
    The Changes (Enhancement) made to the extract structure in RSA6 will be repliacted to the content version (rsa5) as well
    But in our system when i checked the enhanced content version data source for a particular ZZ field in extract structure
    The settings in Data source Selection option is checked and HIDE option is unchecked
    But when i check the same data source in RSA5 the HIDE option is checked
    and also
    What happens if i reinstall/reactivate the data source in RSA5 again.....
    As the extractstructure is already enhanced with ZZ fields my newly installed Datasource (rsa6) will avaliable with ZZ fields or
    SAp Delivered content will be installed
    Thanks

  • Activation of Datasource in RSA5

    Hi ,
    I am tyring to activate the datsource in RSA5, then i am getting the below message.
    a. Generating the datasource " Dastsource name "
    b. object request is currently locked by user " xxxxxxxx".
    So anybody got the same message while activating the datsource.
    Help me out.
    Thanks,
    Lasya.

    Hi,
    It was locked by another user or by u (check if u opened any sessions with that DS)
    goto SM12 and remove appropriate lock
    and comback to RSA5 and activate DS
    Thanks

  • Can't find the datasource from RSA5

    Hi,
    I am working with 0AFMM_C02. When I display the InfoProvider Characteristics tab I see only about 7 infoObjects on the left hand side, but when I displayed the InfoCube data content, I see more than 7 characteristics. When I tried to check the datasource 2AF_MM_INV_3 from RSA5, I couldn't find it. I alos tried RSA6 but it was not there.
    How can I resolve this?
    Thanks,
    Will

    Hi:
    <i>I just realized that I have not yet loaded the master data yet. I am trying to get the transaction data loaded and didn't remember to load the master data.</i>
    <i>I have one question though, I checked my structure and there was data for the other InfoOjects on the R3 side,</i>
    You mean you checked in RSA3 right.
    <i>so would loading the master data will resolve this issue?</i>
    Try it and see.
    <i> And that it is not necessary I have to see the physical data from the InfoCube data content becaue they are NV Attr.?</i>
    What happens is that just because you have fields in R.3 doesnot mean they will be in CUBE. Go to Transfer RUles and make sute all the fields from R/3 and mapped in InfoObjects in BW. THen, go to Update Rules and see if all the Infoobjects in InfoSOurce are infact mapped in Update Rules.
    Then, let me know the differences. This is where some will be missed.
    Loading Master Data before Transaction data is a good practice. many reasons including faster Transaction Data laods, data consistence if you are deriving Characteristics from Master Data, etc.
    Also, if you have Nav. attributes in CUBE, you need to laod Master Data to find that info.
    SO, try it and let me know if you are still missing data.
    Good luck,
    Ram Chamarty

Maybe you are looking for