RSA7 after parallel BW and R/3 system refresh

We have refrehed BW qulaity server (BQA) and R/3 quality server (NQA)from production servers of BW (BPN) and R/3 server (NPR) to avoid initialization in BW system.
Refresh process has been completed successfully and i'm able to test connection from BW RSA! to source system (NQA) is working fine. When we checked the delta queue (RSA7) in NQA, it shows us Data source to point to wrong server (BPN instead of BQA).
Pls suggest what could be the resaon of it and how to resolve this problem.
Regards
Amar

Sudheer/Pradip
Thanks for yr reply. I'm getting the folowing message while doing the steps you have mentioned:
(Deltas already loaded for request REQU_41Q82WJLR9AZCE9ZMKQLVG3RG init. selection; no 2. init
Message no. RSM1071
Diagnosis
Deltas have already been loaded for the init. selection of request REQU_41Q82WJLR9AZCE9ZMKQLVG3RG. A second initialization is therefore not possible with these selection conditions.
Procedure
If you want to carry out a new initialization, you have to choose selections that do not overlap.
If you want to repeat the init. for the same selection, you have to delete the delta queue in the source system, and restart the delta process.
Choose the menu entry 'Init. Selections in the Source System' from the Scheduler.)
I have already deleted the delta queue entry from source system. As per my understanding, if i delete the "initialization entry for source system" in Schedular(RSA1 tcode ) in BQN system then we need to do the initialization.
I did data load with this option earlier after deleting the "initialization entry for source system" in Schedular but this is the first time, i'm trying to avoid initialization and would like to run delta.
Pls suggets. I'm not able to get the  the following line as mentioned in help:
Choose the menu entry 'Init. Selections in the Source System' from the Scheduler.)
Could you pls share your email address as i'm getting some problem while the method you descibe me. I'll forward you the screenshot.
Regards
Amar

Similar Messages

  • After updating kernel and ZFS modules, system cannot boot

    Starting Import ZFS pools by cache file...
    [ 4.966034] VERIFY3(0 == zap_lookup(ddt->ddt_os, ddt->ddt_spa->spa_ddt_stat_object, name, sizeof (uint64_t), sizeof (ddt_histogram_t) / sizeof (uint64_t), &hht->ddt_histogram[type][class])) failed (0 == 6)
    [ 4.966100] PANIC at ddt.c:124:ddt_object_load()
    [*** ] A start job is running for Import ZFS pools by cache (Xmin Ys / no limit)
    And then occasionally I see
    [ 240.576219] Tainted: P O 3.19.2-1-ARCH #1
    Anyone else experiencing the same?

    Thanks!
    I did the same and it worked... kind of. The first three reboots it failed (but did not stop the system from booting) producing:
    zpool[426]: cannot import 'data': one or more devices is currently unavailable
    systemd[1]: zfs-import-cache.service: main process exited, code=exited, status=1/FAILURE
    The second boot also resulted in a kernel panic, but as far as I can tell unrelated to zfs.
    After reboot one and three imported the pool manually.
    From the fourth reboot on loading from cache file always succeeded. However, I it takes faily long (~8 seconds) and even shows
    [*** ] A start job is running for Import ZFS pools by cache (Xmin Ys / no limit)
    briefly. Altough I might only notice that because the recent updates sped up oder parts of the boot process. Did you observe a slowdown during boot time, too, kinghajj?
    Last edited by robm (2015-03-22 01:21:05)

  • Parallels 9 and Windows 8 System Requirements?

    I recently purchased Parallels9 and Windows 8 for my Imac Intel (early 2009) and received a message saying the computer wouldn't run this softwre. Is there a  system requirement for this computer that isn't available?

    Hello,
    Lion needs to be at 10.7.4 at least...
    Parallels Desktop 9 for Mac System Requirements
    To install and set up Parallels Desktop 9 for Mac, you need:
    A Mac computer with:
    An Intel Core 2 Duo processor or better
    At least 2GB of RAM (4GB recommended to run Windows 7)
    At least 700 MB of space available on the boot volume (the volume that has Mac OS X) for Parallels Desktop installation
    Enough free disk space for each virtual machine and its applications (at least 15 GB for each installation of Windows)
    OS X 10.8 Mountain Lion or later, OS X Lion 10.7.4 or later, or Mac OS X Snow Leopard v10.6.8 or later. To identify your computer's processor, memory, and Mac OS X version, choose Apple menu > About This Mac.
    Internet connection required for product activation, select features, and online updates.
    http://kb.parallels.com/en/117047

  • How do I find a serial number after re-formatting and reinstalling? System is claiming I have a trial when I've purchased almost $10,000 worth of Adobe software.

    I purchased Production Premium which includes Photoshop CS5.1 Extended.  Had to reformat hard drive and reinstall software.  Photoshop will open only as a trial.  Says it needs serial number.  The serial number for Production Premium 5.0 and 5.5 don't work. There is no serial number for individual programs, just the entire suite.  Adobe won't provide phone support.  How am I supposed to get a serial number from a forum???

    That's what I did.  I re-installed the entire suite.  Then opened Photoshop 5.1 Extended from Applications.  When I open, it says I'm opening a trial version unless I put in the correct serial number.  I've tried the serial number from the 5.0 suite and the 5.5 suite, both of which we purchased for over $5,000. Neither work and Adobe's telling me they won't provide phone support for anything other than Creative Cloud, and my back office at Adobe verifies I'm using the correct serial numbers.  It's appearing that Adobe's view now is if you aren't regularly renting the latest software from them, they just don't give a damn about your purchases, no matter how extensive. So now where do I go next if Adobe won't support?

  • After uninstalling ITUNES and reinstalling the system, it is not syncing my devices which are IPAD and Ipod Touch.  Please help me out asap.

    Itunes closing out whenever I tried to synce my devices.  Please help me out.  I have uninstalled and reinstalled ITUNES too.

    Use Device Firmware Mode...
    1.     Turn off your ipod To do this, hold the home and sleep buttons for 10 seconds, ignore slide to power off message.
    2.     Release the power button when you see the apple logo (keep holding the home button)
    3.     Keep holding until you see a message.
    Now restore from a backup!
    Alternatively you can wait!

  • Dual Stack BW System refresh

    Hi All,
    We have to perform dual stack BW system refresh from production system to quality system and both are hosted on different hosts.For abap only systems generally we take online backup of production system and restor it to target and follow standard system refresh procedure.
    We have followed same strategy for dual stack systems and perform same stpes as followed in abap only systems but afterwards java was not up and running.
    So we planned to take export of database(ABAP+JAVA) and import it on target server.But since we cannot afford downtime for our BW production system so during export we unmark the option "STop Running System" so as to avoid downtime but our query is that since we are not stopping dual stack BW system then how the database will be in consistent state after import of database.
    Also please suggest if there is any alternate best proceduere that ensures dual stack BW system refresh by ensuirng no downtime of production system.
    Regards
    Joy Garg

    Hi Srinivas,
    We are trying to follow the same procedure,i have doene everything from scrap as per your recommendation but while importing and at step of entering export dump location i.e. Migration Depot screen on entering export dump location it is throwing error:
    You entered: /oracle/BWT/sapdata19/export_dualstack/JAVA Found the label SAP:JMIG:700::: but need the label SAP:MIG::EXPORT(1/::*
    Also please note that during export, a directory pack gets created in SDM home of source system and we have not transfer any of its file to export dump:
    euxc54:bwcadm 112> cd pack
    euxc54:bwcadm 113> ll
    total 2419644
    -rw-r-----   1 bwcadm     sapsys     506116963 Aug 22 13:21 packedOrigin_com.adobe.jar
    -rw-r-----   1 bwcadm     sapsys     727762223 Aug 22 13:20 packedOrigin_sap.com.jar
    -rw-r-----   1 bwcadm     sapsys      423957 Aug 22 13:21 packedSCAs.jar
    -rw-r-----   1 bwcadm     sapsys     4535940 Aug 22 13:21 sdmrepository.sdc
    euxc54:bwcadm 114> pwd
    /usr/sap/BWC/DVEBMGS01/SDM/program/pack
    ================================================================================
    Also please note that structure of export dump generated is as :
    euxc54:bwcadm 115> cd /oracle/BWT/sapdata19/export_dualstack
    euxc54:bwcadm 116> cd JAVA
    euxc54:bwcadm 117> ll
    total 48
    drwxrwxr-x   5 bwcadm     sapsys          96 Aug 22 13:24 APPS
    drwxrwxr-x   6 bwcadm     sapsys          96 Aug 22 13:07 DB
    drwxrwxr-x   2 bwcadm     sapsys          96 Aug 22 13:08 JDMP
    -rw-rw-r--   1 bwcadm     sapsys          19 Aug 22 13:07 LABEL.ASC
    -rw-rw-r--   1 bwcadm     sapsys          14 Aug 22 13:07 LABELIDX.ASC
    drwxrwxr-x   2 bwcadm     sapsys          96 Aug 22 13:22 SDM
    -rw-rw-r--   1 bwcadm     sapsys         193 Aug 22 13:07 SOURCE.PROPERTIES
    drwxrwxr-x   2 bwcadm     sapsys          96 Aug 22 13:18 TOOLS
    =================================================================================
    Database is Oracle 10g while OS is HP UX and note that ABAP syetm on refreshed is running fine.
    Please suggest.
    Regards
    Joy garg
    Edited by: Joy Garg on Aug 22, 2011 3:53 PM

  • System refresh - SMQ1 and RSA7

    Could someone please explain what I should do with SMQ1 and RSA7 after a system copy?
    I assume I would delete all queues which are pointing to old sid.?
    thanks
    Jexun Wikdfire

    Hi,
    SMQ1 : outbound queue for qRFC Monitor. this transaction is used  to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
    For the details please see the link below..
    http://help.sap.com/saphelp_nw2004s/helpdata/en/76/e12041c877f623e10000000a155106/frameset.htm
    RSA7: In R3 it's show the delta queues for all data sources in the same source system.
    For like  Data sources in R/3 will have their delta queues in R/3 and hence these will be displayed in RSA7 in R/3.
    The main purpose to use RSA7 is to maintain the BW delta queue, it will generally show the status and the data source having the delta mode active .
    You have to first  check the data source in the delta mode which are not getting populated in the RSA7 t-code .
    Check the following link for the details..
    http://help.sap.com/saphelp_nw04/helpdata/en/6f/66bca6ae43744283d74f1e456ff6c0/content.htm
    Regards
    Bhuban

  • I keep getting this message after closing Firefox and attempt to reopen-Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

    I keep getting this message after closing Firefox and attempt to reopen-Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

    See:
    * http://kb.mozillazine.org/Recovering_a_missing_profile
    * http://kb.mozillazine.org/Profile_in_use

  • Is there any way that I can get back my iPhoto?  After having hard disk replaced (no backup) and the operating system has been updated to Lion (no disc) I am wondering if iPhoto can be reinstalled with my Leopard discs?

    Is there any way that I can get back my iPhoto?  After having hard disk replaced (no backup) and the operating system has been updated to Lion (no disc) I am wondering if iPhoto can be reinstalled with my Leopard discs?

    As Niel pointed out, yes.  The disk probably will look like the MBP disk (4) in this screenshot;
    OT

  • After several years of use very satisfied with Firefox, recently loaded version (4.0.1) severely slows my browsing, and even my system, especially when there are pictures or videos. I said that this was not the case before and my system is Windows XP SP3.

    After several years of use very satisfied with Firefox, recently loaded version (4.0.1) severely slows my browsing, and even my system, especially when there are pictures or videos. I said that this was not the case before and my system is Windows XP SP3.

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • I disabled my Macbook  Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

    I disabled my Macbook  Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

    How do you disabled it if running the same?

  • PO DELETED AFTER MADE GRN AND PAYMENT----SYSTEM ALLOWED

    Dear friends
              In our company the user deleted the purchase order after done GRN and made payment.
    The question is how the system allowed to do it?
    i checked the system message to stopit but i couldn't found it.so could anyone let me know is there configure need to do or any user exit need to activate?
    Thanks &Regards
    S.Anbalagan

    06 115 is only pulled when received quantity is unequal to invoiced quantity. if both are equal, then the PO can be deleted.
    ...... and this is designed this way.
    A deletion is just part of the life cycle of a purchase order, and it is just a required step in the preparation for archiving.
    So you cannot prevent it except by a user exit, but this one will as well stop you from archiving later on, (except you code it in a way that you allow deletion if it is carried out by traxaction e.g. SARA )

  • I am receiving an error message "Error: 150:30" after having my computer serviced. Repair shop completely stripped down my machine and reloaded Operating system, Yosemite 10.10.1. tried to download a Licensing update, but can't get that to open.????

    Adobe Photoshop CS4
    I am receiving an error message "Error: 150:30" after having my computer serviced.
    Repair shop completely stripped down my machine and reloaded Operating system, Yosemite 10.10.1.
    I tried to download a Licensing update, but can't get that to open.????
    My machine had originally been a clone of another Mac. Not it looks like a brand new computer.
    Possibly there is something in system preferences to change? I turned off Firewall and allow downloads from all parties.
    Thank You for you help!
    joe

    150:30 means the licensing failed. Photoshop can't be moved like other programs from another drive or from backup.
    I would suggest a reinstall to fix it. Anytime you move Photoshop from from drive to another, it breaks licensing. A install is the quickest way. to fix it.
    When you are done with the install, apply all CS4 updates.  Product updates
    Gene
    (Remember to mark the answer that solved your issue by clicking on “correct”. This indicates the question is answered and credits those who took time to help you or followup if there are further questions)

  • After Effects CS6 and Premiere Pro CS6 not available for installation for 32-bit systems

    After Effects CS6 and Premiere Pro CS6 require a 64-bit operating system and processor to be installed and run.
    If you subscribe to Creative Cloud but use a 32-bit computer system, you will not be able to download and install Premiere Pro CS6 or After Effects CS6.
    This issue primarily affects users on the Windows operating system, since all supported versions of the Mac OSX operating system are able to run 64-bit applications.
    See this document for details:
    "64-bit Windows required for After Effects and Premiere Pro CS6"
    In general, you can only download and use applications for which your computer system meets the minimum system requirements.
    Premiere Pro system requirements
    After Effects system requirements

    Who's says that Microsoft can't debug?
    I used msconfig, first disabling startup items, -same result.
    Enabled all startup items, disabled all non-microsoft services - AE worked!
    I re-enabled each service in turn until AE crashed.
    The fault was related to an item for a video streaming device I have in my house.  It was Monsoon-multimedia's Vulkano Service.  Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen.  It does load a couple of virtual devices in device manager, and uses a proprietary codec.
    I uninstalled the vulkano streamer application and rebooted the external Vulkano device.  I reinstalled the Vulkano and verified it connected to the device and could stream.  Once it did, I tried AE again and IT WORKED!
    I wonder if simply rebooting the Vulkano would have fixed it.  Its like opening the garage door to turn on the refridgerator.
    Thanks for the help!
    Jim

  • I installed updates for i photo and the computer restarted for the successful installation . But after the restart was done , the system was been frequently restarting??

    HI,
    NEED URGENT HELP !!
    I installed the updates for i photo as suggested by the software updates and then restarted as displayed on the screen for successful installation . But after the restart was done , the system again displayed a grey window that says to restart in different language. I'm worried and could not understand that why this is happening as i only update what mac recommended .Moreover , I'm new to mac book and therfor i'm finding few things difficult to understand. Any help or suggestion is welcomed and much appreciated.Please reply !!

    Troubleshooting: My computer won't turn on
    Mac doesn't boot

Maybe you are looking for