RSA7 Delta Quere error when reading the data

I am working on BW3.5
I have six datas sources which extracts data from R/3 to BW
one of the datasource is failed. when checked RSA7, selected the failed datasource and executed, throws the short dump error.
I have analysed the error.
The shortdump is creating when it is reading data from the datasource.
There is a problem in the standard RFC table TRFCQOUT and ARFCSSTATE.
The table TRFCQOUT has one record for Payment for the ARFCTIME which is missing in the ARFCSSTATE table.
The table ARFCSSTATE has no record for the payment
When extracting data for the payment data source short dump error is thrown because of mismatch entries in both the tables.
Kindly let me know what exactly the tables are taken into account when the data is moved from R/3 to BW
I think if the data can be deleted from the TRFCQOUT table then if will go fine but I am sure what could be implications
Kindly let me know how best I can resolve the issue.

Hello Pavan ,
You can delete the Records from Deleted from TRFC* and the load will be fine BUT you are not suppose to do that, this simply would mean that we have lost the record , hence this is not advisable.
Instead check and analyse the record there to see if :
1.The record is an old one hence not useful anymore
2.The record has correct values that are suppsoed to be
If the record seems to be obviously redundant or useless we can delete it , else the correction should eb done on the source system side.
Regards,
Tapish

Similar Messages

Error when reading the data of infoprovider

Hello,
I have a problem when excecuting the transaction 'listcube' on a specific infocube. It occurs an error message which complains problem when reading the data of the infoprovider. The message text sounds as follows:
Error reading the data of InfoProvider ZDPPTGR1
Message no. DBMAN305
Diagnosis
Errors occurred while reading a VirtualProvider outside the BI system. Check whether the previous error messages contain any information about the possible cause of this error.
It is possible that the error message cannot be displayed because the error message class does not exist in the BI system. If this is the case, only the name of the error class and the message number are displayed. View the error message text in the specified error class in the source system of the VirtualProvider.
Procedure
Since the error is not necessarily in the BI system, there is no specific procedure for resolving it. With VirtualProviders, problems often occur with the connection to the remote system; these can lead to system termination. If the code for the VirtualProvider is not from SAP, contact the relevant contact person to help resolve the issue.
If an SQL error is listed in the previous message, see the procedure for SQL errors.
Has anybody experience with solving this problem? It sounds like a bigger problem - can somebody confirm this? Or is it a problem which is easy to solve?
Thanks for answering!
Kind regards
Heinz

Hi,
Please follow the below threads. They are similar to the error you are facing and they may help you with the issue ::
Remote cube - uncaught exception
DBMAN350 Error reading MultiCube data over aggregate
Error reading the data of InfoProvider 0TCT_VC01
Regards,
Arpit

Error when reading the access data for the Adapter Engine

We are getting the following error in XI. It started on Jan 22 and resolved on Jan 23 automatically. Nothing has been changed and we don't able to understand how problem started and how it resolved:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.xpd.dbcixpd</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.xpd.dbcixpd</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.xpd.dbcixpd</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Pls suggest if anyone has gone thru same problem.
Regards
Amar

I got the same problem while using RFC lookup.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.tx1.netweaver</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.tx1.netweaver</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.tx1.netweaver</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any idea ,when we get this error usually.

Error when reading the DDIC-data for table

Hi Tobias
We upgraded from DMIS 2011 SP04 to SP07. We are in development system.
To test initial load, we stopped replication for an existing table and then started replication for the same table.
Mass transfer id connects ECC system to BW on HANA system.
Replication errored with the following message:
Error when reading the ddic-data for table MARD (RFC destination DWACLNT010).
Looking for your guidance.
Kind Regards
Kamaljit Vilkhoo

Was able to solve using oss note 1972533.

Error when reading the access data(URL,user, password) for Adapter Engine

Hi,
We are getting this error in production system
"SXMBSysErrorAlerts, Category INTERNAL, Error code: AE_DETAILS_GET_ERROR error text: Error when reading the access data (URL, user, password) for the Adapter Engine".
Please tell what can be the cause of error. Where are the access data (URL, user, password) for the Adapter Engine read from?
Its urgent. We are in support project.
regards,
john

Hi jhon,
please check the following threads to resolve the problem.
AE_DETAILS_GET_ERROR
Error : no_adapter_engine_found: Unable to find Adapter Engine
regards
mahesh.

Read error when reading the master data of 0EMPLOYEE on demand, attribute 0

Hello All,
While loading data for HR data source 0HR_PA_OS_1 i am getting the below error message..
Error 1 in update.
Read error when reading the master data of 0EMPLOYEE on demand, attribute 0COMP_CODE
Please let me know how can it be resolved.
Regards
Rohit Parti

The problem occurs during data load from R/3. It was not occuring before. When I go to check the PSA contents I get a runtime error - GETWA_NOT_ASSIGNED.
Error analysis
    You attempted to access an unassigned field symbol
    (data segment 32821).
This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
    - You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.

Attribute change run fails - "Error when deleting the data record /B05/X.."

Hello,
I get the error message "Error when deleting the data record /B05/X.." on doing the change run.
I have already done RSRV on this objects and found no errors, but still the activation fails.
please give your suggestions ASAP to fix the issue as it is on production system.
Thanks.

Attribute change run could fails due to 2 reasons-
(1) attribute xchange run is already runnnig for any toher object(monitor lock) (check by thi prog-RSDDS_CHANGERUN_MONITOR)
(2) data is loading deleting from the object on which attribut changerun is running.(go in a manage tab and check)
check this two conditions and rerun the attribute changrun again from program - RSDDS_AGGREGATES_MAINTAIN and give the master data name in the selection.
Hope it helps you.

Error when updating the data from DSO to cube

Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
Annie

Hi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha

Error when reading the ID of the business system from the SLD

Hi,
I am working on a scenario JDBC - XI - BW (ABAP Proxies). I configured all the steps required to connect XI & BW systems. The SLDCHECK transaction is all green. I was able to connect to SLD from BW using SXMB_IFR tcode too. I was able to look at all the XI Repository interfaces from SPROXY tcode in BW. Created a new ABAP proxy (class interface and method) for the message interface in XI from BW (SPROXY Tcode). Created all required config in XI Directory. Got the message from JDBC adapter, mapping done successfully, and the message failed in the CALL Adapter Step.
The error is "Error when reading the ID of the business system from the SLD for system BWS and client 100."
What could have gone wrong. Thanks in advance.
Srini

Hi,
:::::::One Should Have the Following Roles AS A XI Developer With Out Admin Rights ::::::
1) SAP_XI_Developer_ABAP +
2) SAP_XI_Developer_J2EE +
3) SAP_XI_MONITOR_ABAP +
4) SAP_XI_MONITOR_J2EE +
5) SAP_SLD_ADMINISTRATOR +
6) SAP_XI_BPE_MONITOR_ABAP +
7) SAP_XI_DEMOAPP
8) SAP_XI_DISPLAY_USER_ABAP +
9) SAP_XI_DISPLAY_USER_J2EE +
Regards
Sesh

KP06 Cost Center Budget Planning System error when locking the data records

Hi,
While updating Cost Center Planning system(KP06) its giving the below error:
System error when locking the data records.
Message no. KI502
Diagnosis
The lock to protect the data records being processed could not be set. The
probable reason for this is that the SAP locking table is full and no more
entries can be added.
Procedure
Inform your system administrator immediately
No planning data has been changed
Message no. K8038
Diagnosis
You used Post. While preparing the data for posting, the SAP System
determined that no changes were made in the available databank values.
System Response
A posting activity price is not necessary
Please help me how can we rectify the above error..
Thanks
VS Rao

Hi,
check the locking entries (t-code SM12).
http://help.sap.com/saphelp_erp2004/helpdata/en/37/a2e3ae344411d3acb00000e83539c3/frameset.htm
Best regards, Christian

MSS 60.1.19 - Salary Development iView - Internal error wh reading the data

Hi guys!
I face the problem of an iView Salary Development. I get error: Internal error while reading the data. I found a thread with the same problem, but there is no solution. Did anyone of you solve this problem?
Thanx for answers!
Peter

HI Peter
I have the ivew salary development wroking more or less. There are some problems with totals from wage types including IT14 & 15 which I have reported and waitnig for response frmo SAP..... but at least IT0008 is working ok on it.
I didn't get this message so let me know how to help...! Ha<ve you done the config for the iview yet?
helen

Error when loading the data from PSA to ODS......

Hi BW guru's,
i am facing one problem while loading the data from PSA to ODS.so please help me in this regard.
Please give a step by step guidelines for me...
the error while loading the data from PSA to ODS is "There are no PSA tables for these selection criteria","An error occurred when reading PSA data".
thanks in advance,
ashok.

hi ashok,
u can push data from psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
or
In ods > delete the failed request>goto the processing tab-->select 3rd option " psa and then subsequentially to data targets ", --> schedule the infopackage.
bye
sunil

I am getting an error when reading the preview cache and the program shuts down.

I had to reload Lightroom on a new computer and after I did that it gives me an error when reading from its preview cache and then it shuts the program down. How can I fix this problem?

Delete the preview cache ... it is a folder whose name ends with Previews.LRDATA in the same folder as your catalog file.

Error when Activating the data store object

Hi All,
I have to get the following below errors when i was activating the ods.
Transfer structure prefix for source systemt T90CLNT is not defined
Error when creating the export datasource and dependent objects
could anyone help me on this issue.
Regards,
Naveen.
Edited by: naveen naveen on Feb 2, 2009 6:35 AM

Hi Naveen,
Check the Source System connection and Run program RS_TRANSTRU_ACTIAVATE_ALL in SE38 and give your Source system ID and Infosource. If you have infosource. or replicate your datasource.
and also Check the BW self System whether it is active or not. then try activating DSO
hope this helps
Regards,
Daya Sagar
Edited by: Daya Sagar on Feb 2, 2009 11:13 AM

Error in Reading the data when double quote(") is present.

Hi all,
We are trying to read the delimited data of below type: using file adapter
00|ABC   |00|          |ZZ|ABC      |ZZ|               |090914|above data works fine ..but when we have data of the below form:double quote after pipe symbol
00|"ABC   |00|          |ZZ|ABC      |ZZ|               |090914|
{code}
when a double is present at the begininng of the pipe sysmbol the message is getting rejected...but when we have other symbol's like single quote or plus sign at the beggining the its working fine.
can anyone help me wat the issue is...im using soa 10.1.3.4

any help.

RSA7 Delta Quere error when reading the data

Similar Messages

Maybe you are looking for