RSA7 is not getting data.
Hi Experts,
I am working on BW 3.5, everyday i am getting data from 2LIS_03_BF with delta update,till yesterday data was successfully loaded, today load has succeeded but zero records were updated, i have checked in RSA7, there also it is showing zero records, but in R/3 postings have been done, that postings are not updated to RSA7,
in LBWE also 2LIS_03_BF data source is in active version.
what would be the problem,please suggest me to solve my problem,
<removed>,
Thanks in advance,
Venkat
Edited by: Arun Varadarajan on Feb 6, 2009 12:09 PM
Hi......
Update Queue : LBWQ
V3 Jobs...........u hav to schedule the V3 jobs in LBWE.........u can trace them in SM37
Check this Blogs.....
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
Regards,
Debjani.....
Similar Messages
-
Hi all,
i am craeating a dimension and i did the mapping also.i get the data in that dimension table.But i am not able to get the data in the Dimesion (i.e When i right click on the dimesion which i have created,there one option is called Data Viewer,from that i am not getting data)
Can any help me about this.Hi,
Just try with the code given below... hope that helps you out....
also write a break-point statement just before the if statement and check in the debugging mode if it i_mseg table has some values or not...
if i_mseg[] is not initial.
select zzlcno zzlcdt
into i_ekpo from ekpo
for all entries in i_mseg
where ebeln = i_mseg-ebeln.
append i_ekpo.
endselect.
endif.
OR
if i_mseg[] is not initial.
select zzlcno zzlcdt
into corresponding fields of i_ekpo from ekpo
for all entries in i_mseg
where ebeln = i_mseg-ebeln.
append i_ekpo.
endselect.
endif.
Regards,
Siddarth -
Can not get data from database
hi all,
there is a problem , when i write like below :
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
WHERE bukrs = p_bukrs
AND hkont = p_hkont.
p_bukrs , p_hkont are all on the selection screen , and p_bukrs = 1200 another is eq blank. i can not find any data , but with the same condition i can find some data in database , when i debeg i found that p_hkont is initial.
when i write like this :
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
WHERE bukrs = p_bukrs .
this time i can find the data like the database.
so , does someone know where the problem is , why i can not get data ?
kind regards
kevinhi,
if u r using bukrs and hkont as parameters in selection screen then
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
WHERE bukrs = p_bukrs
AND hkont = p_hkont.
this will work.
if u r using then as select-option then the above does n't work.
bcoz select-options work as internal table bcoz of that u have use the query like this
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
WHERE bukrs IN p_bukrs
AND hkont IN p_hkont.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Edited by: Alvaro Tejada Galindo on Aug 15, 2008 5:25 PM -
Not getting data for 1 field in ODS
Hi BW Experts,
I am loading the data from R/3 to BW.I have loaded the data through PSA.The data is available in New data field. After activating the ODS, for 1 field the data is not uploaded and in the report, the values are not displaying.
I have checked the Transformations also. it is mapped correctly.But still i am not getting data for that field.
Thanks,
Siva.Thanks for the Update
1. What is your Service Pack Level?
Service Pack is 0016
2. Are you able to see the data in PSA?
Yes I can see the data in PSA
3. After load, are you able to see the value in New table?
Yes i can able to see the data in New data table
4. Anywhere, are you doing the SORTING of Data Package?
No I have not sorted the data Package.I have not written any coding on this
I have not written any coding in transformation also.
Thanks,
Siva. -
hi,
in my scenario, XI is passing the data back to RFC, but in my program where i call the RFC, the data is not received. what could be the issue.
CALL FUNCTION 'ZFFF' DESTINATION 'XI'
TABLES
INP = aaa
OUT1 = bbb
OUT2 = ccc.
COMMIT WORK.
it was working fine before when i had only OUT1. Later I added OUT2 and then onwards I am not getting data for any of the tables. I have checked in XI, data is being passed out of XI to RFC. No issues in that.
something seems to have gone wrong in the RFC modfication or the RFC call. can anyone please help.
thksHi,
Check the export import parameter declarations & data types in both RFC & XI.
Put a break point in RFC & check whether it is getting triggered.
Best regards,
Prashant -
Not getting data for Null Records.
Hi all,
I am trying to fetch the records where sczuo values are NULL .
DATA : BEGIN OF itab OCCURS 0.
INCLUDE STRUCTURE makz.
DATA : END OF itab.
SELECT * FROM makz INTO TABLE itab WHERE sczuo IS NULL.
IF sy-subrc EQ 0.
LOOP AT itab.
WRITE : /3 itab-matnr , 20 itab-sczuo.
ENDLOOP.
ENDIF.
I did not getting data any data .But if i write select statement like this
SELECT * FROM makz INTO TABLE itab WHERE sczuo = ' '.
This select statement returns the correct data.
why my first select statement is not working ? how can i use IS NULL?
Thanks in Advance,
MadhuHi,
When we insert a new field to an existing table, NULL values are automatically inserted into the new field by the system for all existing records. However NULL and SPACE are not the same.
The logical expression SQL condition is either "true, false, or unknown". The expression is UNKNOWN if one of the columns involved in the database contains a NULL value and such records could be retrieved by using u201CIS NULLu201D instead of SPACE.
Please note that the NULL value is inserted only for the existing records, by the time the new field is being inserted. For all new records, SPACE or the initial (default) value is inserted.
If the new field is inserted by checking the checkbox u201Cinitial valuesu201D, then the initial values (SPACE in case of characters) are automatically inserted and not the NULL values.
ihope u get the solution...
Thanks
Ashu -
Hi Experts,
i am facing the below critical issue.
i have enhanced 2 fields, item start date and end date to crm data source 0CRM_SRV_PROCESS _I Data Source.
while checking data from RSA3 i have got data for those 2 fields(item start date and end date) in CRM System, but while running Infopackage i am not getting data of those 2 fields to BI PSA table.
i got data from RSA3 in CRM Quality and Production Systems and not getting data in Quality and Production BI Systems at PSA level.
But i am getting data in RSA3 in CRM development system and BI Development system at PSA level.
Means i am facing issue only at Quality and Production BI Systems at PSA level.
Please find below screen shots for reference:
RSA3 Screen shot from CRM Quality System:
PSA Screen shot from BI Quality System:
Thanks & Regards,
Nagaraju KHi Anshu,
i have enhanced almost 20 fields for same data source, among these 20 fields other date fields also there which all are getting fine in dev, qty and production systems.
but only these 2 fields are not getting data to BI PSA level in Quality and productions systems.
Please find below code for reference:
if lt_service_assign is NOT INITIAL.
READ TABLE lt_service_assign into ls_service_assign with key ITEM_GUID = ls_data-item_guid.
if sy-subrc = 0.
CALL FUNCTION 'CONVERT_TIMESTAMP_TO_BP_TIME'
EXPORTING
BP_GUID_32 = ls_data-item_guid
IM_TIMESTAMP = ls_service_assign-BEG_TSTMP
IMPORTING
EX_DATE = lv_start_date.
* EX_TIME =
if sy-subrc = 0.
ls_data-ZZITM_STARTDT = lv_start_date.
endif.
CALL FUNCTION 'CONVERT_TIMESTAMP_TO_BP_TIME'
EXPORTING
BP_GUID_32 = ls_data-item_guid
IM_TIMESTAMP = ls_service_assign-END_TSTMP
IMPORTING
EX_DATE = lv_end_date.
* EX_TIME =
if sy-subrc = 0.
ls_data-ZZITM_ENDDT = lv_end_date.
endif.
endif.
endif. -
Not getting data into 3rd int table
Hi all,
here i ve data in 2 internal tables. this data i want store into 3rd internal table, here am adding with inner join but am not getting data into 3rd one.
plz check my logic.
REPORT ZEXCHANGE_RETES .
TABLES : tcurr, " Exchange Rates
/msg/rabr. " Account (Posting Headers)
DATA : l_date type datum.
TYPES : begin of t_tcurr,
kurst like tcurr-kurst, " Exchange Rate type
fcurr like tcurr-fcurr, " From Currrency
gdatu like tcurr-gdatu, " Date as of which
end of t_tcurr.
TYPES : begin of t_rabr,
OW_WHGNR like /msg/rabr-OW_WHGNR,
bil_dat like /msg/rabr-bil_dat,
abrnr like /msg/rabr-abrnr,
end of t_rabr.
TYPES : begin of t_output,
kurst like tcurr-kurst,
fcurr like tcurr-fcurr,
gdatu like tcurr-gdatu,
OW_WHGNR like /msg/rabr-OW_WHGNR,
bil_dat like /msg/rabr-bil_dat,
abrnr like /msg/rabr-abrnr,
end of t_output.
DATA : it_output TYPE STANDARD TABLE OF t_output WITH HEADER LINE,
wa_output TYPE t_output.
DATA : it_rabr TYPE STANDARD TABLE OF t_rabr WITH HEADER LINE,
wa_rabr TYPE t_rabr.
DATA : it_tcurr TYPE STANDARD TABLE OF t_tcurr WITH HEADER LINE,
wa_tcurr TYPE t_tcurr.
getting data into 1st itab
SELECT kurst fcurr gdatu
from tcurr into table it_tcurr
where kurst EQ 'M'.
SORT it_tcurr by fcurr GDATU DESCENDING.
delete adjacent duplicates from it_tcurr comparing fcurr.
getting data into 2nd itab
SELECT * FROM /msg/rabr into CORRESPONDING FIELDS OF TABLE it_rabr.
SORT it_rabr BY OW_WHGNR bil_dat abrnr.
getting data into 3rd itab
SELECT t~kurst
t~fcurr
t~gdatu
r~OW_WHGNR
r~bil_dat
r~abrnr
FROM tcurr as t INNER JOIN
/msg/rabr as r on tfcurr EQ rOW_WHGNR into table it_output
WHERE rabrnr BETWEEN '00000000000000800251' AND '00000000000000800300' AND rbil_dat < wa_tcurr-gdatu.
printing output
LOOP at it_output into wa_output.
WRITE: /10 wa_output-kurst,
15 wa_output-fcurr,
25 wa_output-gdatu,
50 wa_output-OW_WHGNR,
60 wa_output-bil_dat,
80 wa_output-abrnr.
ENDLOOP.
here am not getting data into 3rd i tab.
Thanks & Regards,
sudharsan.Hi,
The select command is the most fundamental function of writing ABAP programs allowing the retrieval of data from SAP database tables.
Try filling the 3rd internal table with Loop ... Endloop.
Loop at t_tcurr.
Read table t_rabr with key field1 = t_tcurr-field1.
If sy-subrc = 0.
Move t_tcurr-field1 = itab_final-field1.
Move t_tcurr-field2 = itab_final-field2.
Move t_rabr -field3 = itab_final-field3.
Move t_rabr -field4 = itab_final-field4.
Append itab_final.
Endloop.
Hope this helps you.
Regards,
Ruthra -
On a west Texas highway I believe my old 3G iphone could get data with 3 bars. My new 4S could make phone calls but not get data. An att guy told me it's because there aren't enough 4G towers yet. Other explanations?
Simple solution. Get a real internet service and not a cell phone internet connection service it was never meant to be used as the primary internet service
And how do you lose a home and job and be sued as you claim. What over 10 Gb of data? Give me a break
In my city small claims is $5000.00
And over that amount you can go to a superior court to have your issue settled.
http://www.bbb.org
Good Luck, Elector -
I prepared a GUI user connection application in NebBeans 5.5 accessing mySql database in the company server. The application run very well in desktop.
However, when I post it to the company server web, it gets nothing from the database.
Can any one give advice???
Thank you in advance.
The following is my application
import java.util.Vector;
import java.awt.event.*;
import java.awt.*;
import java.awt.event.*;
public class UserConnection extends javax.swing.JFrame {
//constants for database
private final String userName = "labmanage";
private final String password = "labmanage";
private final String server = "jdbc:mysql://svr.corp.com/labmanage";
private final String driver = "com.mysql.jdbc.Driver";
private JDBCAdapter data = new JDBCAdapter(server, driver, userName, password);
//variables
private String user, pwd;
private Vector<Vector<String>> userTable = new Vector<Vector<String>>();
private Vector<String>colUserNames = new Vector<String>();
* Creates new form UserConnection
public UserConnection() {
initComponents();
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
// <editor-fold defaultstate="collapsed" desc=" Generated Code ">
private void initComponents() {
userLabel = new javax.swing.JLabel();
pwdLabel = new javax.swing.JLabel();
userTextField = new javax.swing.JTextField();
passwordField = new javax.swing.JPasswordField();
submitButton = new javax.swing.JButton();
statusLabel = new javax.swing.JLabel();
jScrollPane1 = new javax.swing.JScrollPane();
statusTextArea = new javax.swing.JTextArea();
changePwdButton = new javax.swing.JButton();
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
setTitle("User's Connection");
setBackground(new java.awt.Color(153, 204, 255));
setCursor(new java.awt.Cursor(java.awt.Cursor.DEFAULT_CURSOR));
setFont(new java.awt.Font("aakar", 1, 12));
userLabel.setText("User Name:");
pwdLabel.setText("Password:");
submitButton.setText("Submit");
submitButton.addMouseListener(new java.awt.event.MouseAdapter() {
public void mouseClicked(java.awt.event.MouseEvent evt) {
submitButtonMouseClicked(evt);
submitButton.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
submitButtonActionPerformed(evt);
submitButton.addKeyListener(new java.awt.event.KeyAdapter() {
public void keyTyped(java.awt.event.KeyEvent evt) {
submitButtonKeyTyped(evt);
statusLabel.setText("Status:");
statusTextArea.setColumns(20);
statusTextArea.setEditable(false);
statusTextArea.setLineWrap(true);
statusTextArea.setRows(3);
statusTextArea.setText("Initial assigned password is \"dime\".");
statusTextArea.setWrapStyleWord(true);
jScrollPane1.setViewportView(statusTextArea);
changePwdButton.setText("Change password");
changePwdButton.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
changePwdButtonActionPerformed(evt);
org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(getContentPane());
getContentPane().setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.addContainerGap()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(userLabel)
.add(pwdLabel)
.add(statusLabel))
.add(35, 35, 35)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.add(submitButton)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(changePwdButton))
.add(passwordField, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 230, Short.MAX_VALUE)
.add(userTextField, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 230, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.TRAILING, jScrollPane1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 230, Short.MAX_VALUE))
.addContainerGap())
layout.setVerticalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.addContainerGap()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(userLabel)
.add(userTextField, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(pwdLabel)
.add(passwordField, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(statusLabel)
.add(jScrollPane1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.add(15, 15, 15)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(submitButton)
.add(changePwdButton))
.addContainerGap(27, Short.MAX_VALUE))
pack();
}// </editor-fold>
private void submitButtonKeyTyped(java.awt.event.KeyEvent evt) {
if(evt.getKeyCode() == KeyEvent.VK_ENTER) {
submitButton.doClick();
submitButton.requestFocus();
changePwdButton.requestFocus();
private void changePwdButtonActionPerformed(java.awt.event.ActionEvent evt) {
String command = evt.getActionCommand();
if(command.equals("Change password")) {
passwordField.setText("");
//Get connection to the changing password panel
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new ChangePassword().setVisible(true);
private void submitButtonActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
String command = evt.getActionCommand();
if(command.equals("Submit")) {
user = getUser();
pwd = getPwd();
data = new JDBCAdapter(server, driver, userName, password);
data.executeQuery("SELECT * FROM USERTABLE");
colUserNames = data.getColumnNames();
userTable = data.getDataTable();
if(colUserNames.elementAt(0).equals("")) {
statusTextArea.setText("Can not connect to database");
boolean checkUser = false;
int i = 0;
while(!checkUser && i<userTable.size()) {
if(user.equalsIgnoreCase((String) userTable.elementAt(i).elementAt(0))) {
//Find the user in database
checkUser = true;
//Check user's password
if(pwd.equals((String)userTable.elementAt(i).elementAt(1))) {
//Check for initial default password. The user is requested
//to change his password
if(pwd.equals((String) "dime")) {
statusTextArea.setText("You are requested to change your " +
"initial assigned password. Click 'Change password' please.");
else {
//Set UserConnection Panel to invisible
setVisible(false);
dispose();
//Get connection to the table
if(userTable.elementAt(i).elementAt(2).equals("0")) {
//Get connection to non-editable table
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
PVRackReportNonEdit rackReport = new PVRackReportNonEdit();
rackReport.createAndShowDialog();
else {
if(userTable.elementAt(i).elementAt(2).equals("1")) {
//Get connection to editable table
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
PVRackReport rackReport = new PVRackReport(user);
rackReport.createAndShowDialog();
//PVRackReport rackReport = new PVRackReport();
else statusTextArea.setText("You do not get approval for viewing data. " +
"Please contact the administrator for details.");
else {
passwordField.setText("");
statusTextArea.setText("Please enter corrected password or" +
"the administrator for details.");
i++;
if(!checkUser) {
passwordField.setText("");
statusTextArea.setText("Not find such user's name." +
"contact the admistrator for details.");
private void submitButtonMouseClicked(java.awt.event.MouseEvent evt) {
// TODO add your handling code here:
* @param args the command line arguments
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new UserConnection().setVisible(true);
public String getUser() {
return userTextField.getText();
public String getPwd() {
return passwordField.getText();
// Variables declaration - do not modify
private javax.swing.JButton changePwdButton;
private javax.swing.JScrollPane jScrollPane1;
private javax.swing.JPasswordField passwordField;
private javax.swing.JLabel pwdLabel;
private javax.swing.JLabel statusLabel;
private javax.swing.JTextArea statusTextArea;
private javax.swing.JButton submitButton;
private javax.swing.JLabel userLabel;
private javax.swing.JTextField userTextField;
// End of variables declaration
Here is my JDBCAdapter
package rackdemo2;
* This is an adaptor which transforms the JDBC interface
* to the PVRackTableDialogue
import java.util.Vector;
import java.sql.*;
import javax.swing.table.AbstractTableModel;
import javax.swing.event.TableModelEvent;
public class JDBCAdapter {
Connection connection;
Statement statement;
ResultSet resultSet;
Vector<String> columnNames = new Vector<String>();
Vector<Vector<String>> rows = new Vector<Vector<String>>();
ResultSetMetaData metaData;
public JDBCAdapter(String url, String driverName,
String user, String passwd) {
try {
Class.forName(driverName);
connection = DriverManager.getConnection(url, user, passwd);
statement = connection.createStatement();
catch (ClassNotFoundException ex) {
System.err.println("Cannot find the database driver classes.");
System.err.println(ex);
catch (SQLException ex) {
System.err.println("Cannot connect to this database.");
System.err.println(ex);
public void executeQuery(String query) {
if (connection == null || statement == null) {
System.err.println("There is no database to execute the query.");
return;
try {
resultSet = statement.executeQuery(query);
metaData = resultSet.getMetaData();
int numberOfColumns = metaData.getColumnCount();
// Get the column names and cache them.
// Then we can close the connection.
for(int column = 0; column < numberOfColumns; column++) {
columnNames.addElement(metaData.getColumnLabel(column+1));
// Get all rows.
while (resultSet.next()) {
Vector<String> newRow = new Vector<String>();
for (int i = 1; i <= columnNames.size(); i++) {
String tempString = resultSet.getString(i);
if(!tempString.equals("null")) {
newRow.addElement(tempString);
else {
newRow.addElement("");
rows.addElement(newRow);
//Modify dataTable to add empty row to separate chassis
if(numberOfColumns>1) {
int nRow = rows.size();
Vector<String> row = new Vector<String>();
for(int i=0; i<numberOfColumns; i++){
row.add("");
if(nRow>0 || numberOfColumns>0) {
//Adding blank row to separate chassis
int i = 0;
while(i<nRow) {
if(!rows.elementAt(i).elementAt(0).equals("")) {
if(i>0) {
rows.add(i, row);
i++;
nRow = rows.size();
i++;
close();
catch (SQLException ex) {
System.err.println(ex);
public void close() throws SQLException {
resultSet.close();
statement.close();
connection.close();
// MetaData
public Vector<String> getColumnNames() {
return columnNames;
public Vector<Vector<String>> getDataTable() {
return rows;
public int getColumnCount() {
return columnNames.size();
// Data methods
public int getRowCount() {
return rows.size();
}Thank you for your answer.
I'm very new to mySql as server. When I was assigned
to write the application, the administrator has set
up mySql database in the company web server for my
application. My program runs very when using my
workplace desktop with java web start or with java
web start in netbeans (all paths should be link to my
desktop hard disk, i.e. users/application/). I can
not run the application at home because I can not
access to the company intranet server (for security
purpose). The problem happens when I post the
application in the company web page (I have to modify
all paths in jnlp file to the company web address).
The program then runs without exception except it
seems that it gets no data from the database (for
example, when I type my username, it returns that
"There is no such user name. contact.." as what I
code in the application for not correcting user name)
It happens for not only using my company desktop but
also for others.
Please help me.
Thank you in advance.And all this could have been answered yesterday, in your other thread, when I asked you "Is the DB configured to allow that user to connect to the DB from where that user is attempting to connect from?"
Seeing as how you get that error, the obvious answer was, "No." At which point we could have continued.
Configure the needed users into the DB, without forgetting to allow them access from the machines from which they are going to access from.
Although, I agree with Rene, that you should set up a server of some sort, located on the same machine as the DB, for communicating with the DB. -
Not getting data in OBIEE report while pulling columns from different DB
Hi All,
I am creating a report in OBIEE 11g which uses Table A and table B which are joined in both physical layer and BMM layer. But somehow I am not getting any data in the report where as data is actually present for the matching joining columns. However when I made one of the tables (Table A ) as a driving table, I am getting data but only with a filter applied in the report which restricts the data to few records. If the filter is removed, I get an error which is " A Drive Table join exceeded the limit of XXX backend database queries".
Could anyone tell me what can be the issue? Other than using driving table, is there any alternate method to resolve the issue?
Thanks In Advance,
AnjuThe error is due to the setting MAX_QUERIES_PER_DRIVE_JOIN in the database features table that controls and tunes driving table performance. Also, try to follow these blogposts to do cross-database joins/federated queries: http://oraclebizint.wordpress.com/2008/03/19/oracle-bi-ee-101332-cross-database-joins/ and http://www.rittmanmead.com/2007/10/reporting-against-multiple-datasources-in-obiee/
Please assign points if helpful/correct. -
Not getting data in cube from PSA.
Hi Xperts,
we r loading the data to our cube for some material code.but when i am checking for that material code with PSA as i am not getting the material codes in PSA.(the material code of PSA and Cube r totally different,some of the material code is matching which should not be happen.)
But as per my knowledge what ever the data in PSA we will get only that data in our cube.
now my question is why i am not getting all the records in my cube and How can i get this?Hi,
Check in ECC - RSA3 data and then load to BW and chcek in PSA and Cube do like this.
1.Check in RSA3.
2. Load upto PSA only.
3.Check the data PSA Vs ECC.
4. Then load data from PSA to Cube
5. Then check PSA vs CUbe.
In this way find where the error. Take only wrong/few records then check it is easy.
Thanks
Reddy -
Not getting data in cube from lookup DSO
Hi guys,
I have a transformation with source DSO and the target Cube. In which I have a look-up from another DSO to the cube in this transformation, end routine. But I am not getting the records I needed in the cube, which are supposed to flow from another DSO. Any ideas would be appreciated.
regards...Hi,
When we do look-ups in end routine, we don't have active rules for the transformation.
By default transformation's "Update behaviour of end routine change" is set to
Only target fields with active rules
all target rules(independent of active rules)
So, we have to change to
All target rules (independent of active rules) in order to get the look-up data independent of active rules.
In old software, we used to make an infoobject constant,.
"Update behavior of end routine change " was not available.
check it once because it happened to me before.
Hope it works.... -
BW Statistics Cube is not Getting Data
Hi All,
I have installed BW statistics first time and every thing goes fine , it activated succesfully.
But when i checking in the indivisually in every cube, not getting any request, as well as none of the Technical contained query giving Out put,
But I can trace it in the ST03.
So please let me know where i made mistake during installation of BW statistics.
Regards
PremHi Premanshu;
You can do the Init manually this way you will also see if the data load is working or not...and in the process chain infopackage include it for delta laod.
The frequency of the data load for stat cube depends on your systems and how much the accuracy the users wants from the RSDDSTAT* table. We have the process chain to load the stat cube on weekly basis...this should be enough.
Assign the points if these answers helps.
thanks.
BK -
Hi,
I want to fetch a query but when i click Find Data button, i am not getting query option there to enter my query and search it.
Pls help me how to get it.
Thanks in advance.
Regards,
RafiHi Rafi,
did you get services instead of the queries? If so then you have to modify your system connection to a SAP_BW system.
For more information read my weblog:
<a href="/people/marcel.salein/blog/2007/03/14/how-to-create-a-portal-system-for-using-it-in-visual-composer:///people/marcel.salein/blog/2007/03/14/how-to-create-a-portal-system-for-using-it-in-visual-composer
Best Regards,
Marcel
Maybe you are looking for
-
Best practices for office 365 SHARED CALENDAR for whole school / organization
hi we need guidance on best practice for setting up SHARED CALENDAR on Office365 exchange server for entire organization (school)of150 staff. Requirements + all staff should have read only / reviewer permissions on calendar +handful staff should have
-
Returning a row of data in a stored procedure
Please help me remember how to return a row or rows from a pl/sql query in a stored procedure. I am having a major brain fart.
-
How to handle the exception in AWT-EventQueue-0?
This is my code: import javax.swing.JFrame; public class MainFrame extends JFrame { public MainFrame(){ init(); public void init(){ setSize(100,100); import java.awt.event.ActionEvent; import java.awt.event.ActionListene
-
I know that the lockbox program matched the customer using the MICR and the invoice using the invoice number to apply payments. My client would like to be able to match not only the invoice but also the sales order, customer purchase order, etc. That
-
Hello. I need help! I can't install adobe flash on my macbook pro.. What do I do?