RSAR2318 : IDoc type for source system T90CLNT090 is not available

Hi all,
I am working on BI + ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
1. Error:
R7I028
Object could not be activated
2. Error:
RSAR238
IDoc type for source system T90CLNT090 is not available
Error when creating the export datasource and dependent objects
Error RSAR238 : IDoc type for source system T90CLNT090 is not available
I have already checked trx & dtps, but could not find resolution.
Kindly help me with this error.
Thanks and regards,
MS

M Sharma wrote:
But how exactly can I create when T90CLNT is not active? Help please.
Yes, you would need to check with BASIS team how they have created an alternate source system (for debugging) & prepare a RFC b/n these systems. Can you just check the settings in the source system and BI source system...and check the source system for the same BI system. Right click > Check and then do a restore or take the help of basis to fix it. What I think is a possible solution is : RSA1 > Source system > Search System > Right Click > Activate

Similar Messages

  • RSAR238 : IDoc type for source system T90CLNT090 is not available

    Hi all,
    I am working on ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
    1. Error:
    R7I028
    Object could not be activated
    2. Error:
    RSAR238
    IDoc type for source system T90CLNT090 is not available
    Error when creating the export datasource and dependent objects
    Kindly help me with this error.
    Thanks and regards,
    Dhanapal

    Hi,
    Check the same in SDN..
    Object ZDUMMY could not be activatedMessage no. R7I028
    Re: DSO Activation problem
    http://sap.ittoolbox.com/groups/technical-functional/sap-bw/test-cases-for-module-human-capital-management-1425016
    http://sap.ittoolbox.com/groups/technical-functional/sap-bw/idoc-type-for-source-system-t90clnt090-is-not-available-message-no-rsar238-1431565
    Thanks
    Reddy

  • R3 to BW Extraction fails: Non-updated Idocs found in Source System

    We load data from R3 to BW and this process has been successful for the past few days except last night.  The error msg is listed below in between two dashed lines:
    Non-updated Idocs found in Source System
    Diagnosis
    IDocs were found in the ALE inbox for Source System that are not updated.
    Processing is overdue.
    Error correction:
    Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
    I checked the system connection by right click the source system in the Source System page on BW and selecting "Check" and "Customizing for Extractors" from the context menu and find everything works fine.  
    Any idea about the IDOC thing?
    Thanks

    hi Subray/Bhanu,
    With WE05, find some records with yellow status.  How to find some missing data here?
    With BD87, under BW system folder, there are two folders:
    1. IDocs in outbound processing
    2. IDoc in inbound processing
    Under 1st folder, there is one yellow status folder called "IDoc ready for dispatch (ALE service)", continue to expand another folder called CREMAS under it, there is a blue information line which is "Receiver found , Data filtered , No conversion , No version change".
    Under 2nd folder, there is one yellow status folder called "IDoc ready to be transferred to application", continue to expand other two folder under it called "BBPIV" and "RSRQST", find there is a red flash status line which is "No resources, immed. processing not possible: Too few free dialog work" under these two folders.
    I need to go ahead to select these two red flash status lines and then press the Process button at the top bar?
    Thanks
    Message was edited by: Kevin Smith

  • Extraction failure and then picked up due to IDOC setting on source system

    hi All,
    Just give one master data Company Code load as an example.  We run the data load every night around 12 though Process Chain.  When we checked the monitor, find that it ran twice, 1st time, it ran at 12 which was supposed to run, but it failed with red error and the red error msg is:
    "IDocs were found in the ALE inbox for Source System that are not updated. Processing is overdue."
    then it ran again at 07:45:55 which was successful with green light. We guess this problem is caused by IDOC setting on the source system.  Run WE02 on the source system, expend Inbound IDocs folder and then expend RSRQST folder, find status 64 which indicates the yellow status. 
    Can anyone explain here why the extraction failed 1st time around 12am due to IDOC setting on the source system, and then the run was picked up around 7am successfully?
    Thanks in advance!

    Hi Kevin,
    this is really a strange behaviour. What I could imagine: it could be temporary network issue or performance issue or system unavailability on the r/3 source system side. maybe you could check if other processes/jobs on R/3 were canceled, or if there is any system log available at the time concerned.
    Lilly

  • Confusion on IDOC types for creation of PO

    Hi,
    Requirement is sending PO from sendin SAP system to receiving system.
    For sending am using-
    Processing code ME10
    On serching forums and tutorials,  i came across IDOC type- ORDERS05 but this idoc type is for both PO and SO.
    PORDCR04 idoc type for creation of PO only.
    Some post says PORDCR04 doesnt create PO header text.On the other hand,For inbound processing of PO idoc ( using ORDERS05 ) processing code is not available.
    I will be thankful if somebody can guide me which of these idoc types is preferable.
    Thanks.
    Edited by: Sanjay_lnt on Jan 8, 2011 3:49 PM

    Hell Sanjay
    Outbound ORDERS (= Purchase Order) and inbound ORDERS (= Sales Orders) are like siblings which reflect the customer / supplier relationship.
    In case of the PORDCR04 IDoc it is somewhat different because does it make sense to have the same purchase order in different system?
    In our case a POS (= point of sales) system is used to create a purchase order (for replenishment) which is then converted (via SAP-PI) into an inbound PORDCR04 IDoc in the ERP system. Out of this purchase order a replenishment delivery (for the shops) is created.
    Regards
      Uwe

  • Error in code page mapping for Source System

    Hi All,
    We are Loading data into BI system from MDM System.
    It was loading fine but Yesterday we got an error " Error in code page mapping for Source System"
    Message Class: RSDS_ACCESS 13.
    We alreday tried to Search any IDOCs with error/unprocessed , but there isn't any.
    Any pointers for this error will be Helpful.
    Regards,
    Mayank

    Our SP currently SAPKW70019 , the SAP note mentioned above required to apply SP for 13, which we already beyond that...unfortunately we still face the same problem .. almost every day ..
    any advice.. ?
    Edited by: Edi Erwan  Abu Talib on Jun 22, 2009 8:22 AM

  • Error in codepage mapping for source system

    Hi Experts,
    I am getting the following error while loading data from ECC only for Account COPA datasource.
    Error in codepage mapping for source system. Error text:
    Message no. RSDS_ACCESS013
    Regards,
    Sandeep Sharma

    Hi Sandeep,
    This is a issue related to idocsRFC connections from teh sourcesystem....
    U can contact ur BASIS team to solve this...
    From their end they have to chk the unprocessed/errored idocs in BD87...
    They have to run a report:RBDAGAIN to process the errored idoc's in the source which are in STATUS:'02'.
    This is a solution for temporarilrly basis...
    If this occurs regularly they have to change the settings in SM59 which is so important...
    Refer exact note for this: 784381
    The SAP note 613389 may also be relevant for the error message "Could not find code page for receiving system", please check the information given in the note and see if you can use it to resolve the problem.
    Regards,
    Marasa.

  • IDOC type for interface between SAP ECC and SAP F&R

    Hi Experts,
    I need SAP standatd IDOC type for interfacing between SAP ECC and SAP F&R [SAP Forecasting and Replenishment] using message type u201CFRE_LOC_SITEu201D.
    Please help me in finding the idoc type?
    Regards,
    Krishan

    Hi Denish,
    You have 2 ways of loading data from R/3 to APO.
    1. R/3 to BW cube to APO-BW cube to APO planning area
    or
    2.  R/3 to APO-BW cube to APO planning area   
    BW can be a enterprise BW system ( independent) or you can use the BW inbuilt in APO also referred to as APO-BW.
    The only difference between the 2 BW systems is APO-BW can not take the load of reporting where as the enterprise BW can.
    Unless your company policy requires the enterprie BW system, I suggest using 2nd way.
    You can load the data from R/3 to APO-BW cube using extractors either generic or standard depending on your data. You need to have a RFC connection setup between APO-BW and R/3. ( This is not CIF).
    When you load the data into the APO-BW cube, you just have to load the data from the cube to APO planning area using the transaction /sapapo/tscube.
    Refer to [DP Data Mart|http://help.sap.com/saphelp_scm50/helpdata/en/13/5ada58309111d398250000e8a49608/frameset.htm] for more information about the data transfer between APO-BW and APO.

  • Outbound output type & Idoc type for MIRO (Invoice Posting)

    Hi Gurus,
    I have requirement like , I want to send the outbound IDoc to a external system containg the invoice detials after Saving in MIRO.
    I am not able to find any output type & Idoc type for the same.
    By going through varios threads , I found that there tell there is no Idoc type & output type for sending Idocs after MIRO.
    Kindlt let me know, if it so, or how this req can be fullfiled by other ways.
    Thanks
    Amresh

    Hi,
    Create Custom Idoc type with required fields,custom output type and assign it to partner profiles.(If there is no std idoc type or output type)
    Use Funtion module MASTER_IDOC_DISTRIBUTE to generate Idocs while saving MIRO, for this you need to find exit or implement implicit enhancement while saving MIRO.
    Regards,
    Ashok.

  • IDOC Type for Tcode CC01 and CC02 (Create / Change Change Numbers)

    We are trying to integrate Change Master from a 3rd party system to SAP R/3 4.72.What is the IDOC Type for Tcode CC01 and CC02 (Create / Change Change Numbers)

    Thanks...
    We have looked at this IDOC Type. However we are not very sure how the components (Material/BOM etc.) will be mapped into E1AEEFM segment in the IDOC.

  • Non-updated Idocs found in Source System

    Hi Experts,
    I am getting an error Non-updated Idocs found in Source System
    Plz help me to resolve this issue.

    Hi
    BD87 Update Idocs manually.
    1. When you look in the Monitor screen for the first time on a day you mostly will see some Loads that have yellow traffic lights. When you click on the lowest line of the Load (with the time of Load start) you will get the next popup screen:
    2. Here you can click on the "Yes" button. The Load specification window (right side of the screen) will now be filled with data.
    3. You can now start the manual processing of the IDocs. You go to the "Details" tabpage of the right window. You right click on the line with the red traffic light stating "Request IDoc : IDoc ready to be transferred to application" on the "Details" tab page of the Load. In the option menu that appears choose the option "Update manually in OLTP" (click it).
    4. You will get to the next screen (which is in fact a transaction in the source system (SAP R/3) where you can update the IDoc that is send by the source system)
    5. Now click the "Excecute" button on the left of the screen (or press the F8 button on your keyboard). You will get to the next screen:
    6. This states that the IDoc has been passed through to BW. You return to BW by clicking the "Back" button (or pressing the F3 button on your keyboard) twice. After the first time you will see the previous screen and after that the Monitor screen again.
    7. You will now see that the Status of the Load has turned to yellow or green. When it is yellow you will have to wait a little time (the execution of the Load in BW is still running) and by clicking "Refresh Details" button on the left upper side of the screen (or pressing the F8 button on your keyboard) you will see the Load turn green.
    Hope it helps

  • WMMBID02 idoc type for 313 movement

    Hi,
    I want to integrate two step movement (313-315) in a third party system to SAP. Now we are using WMMBID02 idoc type for stock transfers but when I tested movement type 313 I got an error  ""you have entered a movement type that has not been defined for this transaction/event.
    Does it mean that WMMBID02 idoc type is not used for 313 stock movement?
    Which idoc type should we use?
    Thank you

    Hi,
    Problem is happening becuase of Transaction code used in IDOC header segment, try checking the tcode used and whether its valid for the mvt 313 (u can check this in transaction code OMJJ),
    if i can guess it right, u should try using MIGO  in your idoc, if it doesn't work try using MB1B,
    IF you are in version 4.6c or below, then MB1B will work (MIGO is allowed for transfers only after 4.7 and above)
    hope this helps
    Reg
    Dheeraj

  • Idoc Type for Billing

    Hi
    I need some help in knowing which Idoc type is to be used for sending invoice to external system and what is the method of finding the Idoc type for this purpose
    Manu Seth

    Hi,
    Use transaction code WE60.
    In the basic type field enter INV* and click on the drop down button.
    The system will display list of IDOCS starting with INV.
    The IDOC types used for Invoice/billing documents are INVOIC01/INVOICO2 (Incoming/Outgoing).
    You can get the documentation in the same transaction code c-header and HTML format buttons.
    You can also check the link [EDI -IDOC interface|http://help.sap.com/printdocu/core/print46c/en/data/pdf/SDEDI/SDEDI.pdf] for details.
    Regards,

  • Error in code page mapping for Source system whil loading the data from ECC

    HI Gurus,
    I am working in a implementation project, Recently our BI sand box is up, when i am doing my load from 0comp_code_attr it is throwing an error "Error in code page mapping for source system"(This is my first load from ECC).
    In details tab it is showing as the data is sent from the source system but the data is not reaching to the PSA.
    Please let me know if there are any settings needs to be made.
    Many thanks in Advance
    Jagadeesh

    HI V,
    Thanks for your quick response. I did it but it didn't resolve the issue. since the system id which i am having is 3 digits(LEC) but there it is taking only 2 digits, so i clicked on the button called Propose system ids, it has praposed LE, but the issue is stil there.
    Do we need to do any settings in LBWE??
    Thanks and Regards
    Jagadeesh

  • Initialisation option for source system in schedular tab

    What initialisation option for system in schedular tab signifies? Does it acts as pointer and points to the last record loaded in cube or ods?

    Hi....
    Welcome to SDN..........
    Initialisation option for source system in schedular tab........
    shows to you all the init you made for a specific datasource/sourcesystem...if you find a row here, it means that the init channel is active and you can load delta for that specific flow.....
    Initialization may with data transfer or without Data Transfer.......If you do with data transfer it will set the init flag............as well as it will fetch the data from set up table...........if you do without data transfer it will only set the init flag.....it will not fetch any records.........As soon as this init flag get set.......delta queue will get generated in the source system........after that any changes or new records will go to the delta queue.............So initialization load will be followed by delta load......
    When you have to reinit, first of all you have to delete this row and then request a new initial load, otherwise the system cannot allow to perform a new init (with overlapping condition) if you don't deete the previous one....
    Hope this helps
    Regards,
    Debjani.......

Maybe you are looking for

  • IPod Nano 3G - dead as soon as taken off charger - new battery fitted

    A couple of years ago my girlfriend won a 4gb iPod Nano 3G in a raffle. As we both had other iPods, it has been sitting in a drawer ever since. The other day I found it, and thought it would be useful for using in my car. It was still sealed in the b

  • How to find out the table for Posting Key and A/R & A/P Document types

    hi folks, can you let me know which TABLE is used to Posting key and also which TABLE is used for Account Receivables and Account Payables. Thank you in advance.

  • Index of the Headings in the Table - Group row number 1. 1.1

    I need to see the data as below in the grouping table Index of the Headings in the Table. 1  Heading 1.1 Sub Heading 1.1.1 Detail Heading1 1.1.2 Detail Heading2 etc.. kindly help me on the expression ShanmugaRaj

  • Handling 2-D arrays

    I have this 2-D array: private int[][] board = {{0,5,0,0,0,0,0},                          {0,0,0,0,0,0,0},                          {0,0,0,0,0,0,0},                          {0,0,0,0,0,0,0},                          {0,0,0,2,0,0,0},                  

  • Flash CS5 Greeter.cs HelloWorld.fla text type Dynamic not an option? ActionScript 3

    Learning to program in ActionScript 3 for Flash CS5 Pro, http://help.adobe.com/en_US/as3/learn/WS5b3ccc516d4fbf351e63e3d118a9b90204-7fdf.html The tutorial says that the text box, should be text type Dynamic, but the only choices are TLF and Classic S