RSBBS jump query not fetching the document no in R3

Dear Gurus
With RSBBS transcation jump is given to R3 tansaction FB03. When query is executed and with right click go to option and with display document (FB03) its fetching the document no in DEVELOPMENT server . But when the query is transported to Production its not fetching the document no.
Kindly do the needful at the earliest
Regards,
R.Satish

Hi
You said it is not fetching the doc no. Is it failing and showing some error?
Have all the pre-requisite settings been done via Tcode SICF.
Regards
Nageswara

Similar Messages

Query not fetched the record

Hello,
Could someone help me please ?
I have a listing of my sales orders and I want to make changes in my order by opening the form and fetched with that record. When I click on that particular orderno in my listing of order and call the form to display the details, it calls the form but says "Query could not fetch the record". I do not know why ? Please help me with the solution.
Thanx

Hello,
I think you are passing orderno to called form as a parameter. If you are using parameter list check..
1. If parameter data is getting in form correctly ?
2. Next, have you changed where clause of other block,so that is will display record with passed orderno ?
I am expecting more details from you.
Thanx
Adi

Could not save the document to the repository for the following reason: [repo_proxy 30] DocumentFacade::uploadBlob - Query execute has failed : Error occurred while attempting to reconnect to CMS : Not a valid logon token. (FWB 00003) (hr=#0x80042a70) (WI

Hi, getting Could not save the document to the repository for the following reason: [repo_proxy 30] DocumentFacade::uploadBlob - Query execute has failed : Error occurred while attempting to reconnect to CMS : Not a valid logon token. (FWB 00003) (hr=#0x80042a70) (WIS 30567) amongst lots of other errors when scheduling.
I was logged in as administrator and attempting to schedule a webi document to my self using the email option.
thanks in advance

Hi Trinath,
Could you please confirm if you could save a new report as well or not; or is it specific to scheduling.
If you are unable to save a report also then I think this is due to the path of the Input File Repository Server or its temporary directory are not pointing to the same path, and their locations are set to 2 different hard drives
BOXI3.1 Server must use the same hard drive (local or network share) for the Input File Repository Server and its temporary directory.
- Shahnawaz

RSBBS Jump Query -- Assignment Details

Hi , I went RSBBS Jump Query --> Assignment Details --> InfoObject is Company Code so I (select type "Variable") --> Field Name I tried both Info Object Name("0comp_code")and Variable of Infoobject "0comp_code" is "ZS_CC" Manual entry variable for choosing NYLP OR NYPLP So i tired putting that in Field Name --> Selection Type (E Single Value). But it did not work and reciever query still show me the both NYLP AND NYPLP COMPANY CODE. reason I think of is use of Structure Company code in Receiver query and not the same Variable ("0comp_code")ZS_CC which is used in Sender query. I cannot change the same beacuse of reconicillation issue between two report
Please let me know if I am doing any thing wrong or is there any other way to resolve this quick.
thanks
soniya

I didn't understand your question, i think you can do this way.
RSBBS Assign your Sender Query and receiver query. In Receiver query i think you have company code then create a variable and should be replacement path and specify the sender query In the next screen in the query option. Then you should be getting only those values for that company code. When u drill down. It should work, wait for others opnion.
Regards
Kunal

Report is not fetching the data from Aggregate..

Hi All,
I am facing the problem in aggregates..
For example when i am running the report using Tcode RSRT2, the BW report is not fetching the data from Aggregates.. instead going into the aggregate it is scanning whole cube Data....
FYI.. Checked the characteristcis is exactely matching with aggregates..
and also it is giving the message as:
<b>Characteristic 0G_CWWPTY is compressed but is not in the aggregate/query</b>
Can some body explain me about this error message.. pls let me know solution asap..
Thankyou in advance.
With regards,
Hari

Hi
Deactivate the aggregates and then rebuild the indexes and then activate the aggregates again.
GTR

Could not retrieve the document with the passed obsolete token.

Hi,
Issue is with the specific report not able to execute when the query is cancelled and getting an error when you are cancelling an already executing query.
Receiving an error message during running one of our report in the
following way:
- Run the Webi report
- Select the value for 8 prompts
- Click on cancel
- try to re-run by clicking on re-fresh and receive an error message.
The error message is the following:
"Could not retrieve the document with the passed obsolete token (Error: RWI 00323) (Error: INF)"
Till now we have made the following changes:
This might be caused by a storage token that identifies a document state, which is no longer available in the storage tokens stack.
In the webi.properties file, increased the value of storage tokens stack size.
1. Edit the webi.properties file found in the following location:
u2022 <Installed dir>\program files\businessobjects\BOenterprise115\Web services\en\dsws_webservice_boe\data\asemble\dsewsBobjJava\src\WEB-INF\classes\webi.properties.
2. Add or change the following variables:
u2022 WID_FAILOVER_SIZE (This sets the maximum number of tokens to keep in memory. It is 10 by default.)
u2022 WID_STORAGE_TOKEN_STACK_SIZE (this sets the maximum number of tokens stored on disk. It is 10 by default.)
u2022 Deleted cookies.
u2022 Add the Java Runtime Parameter value from following path:
Start - > Control Panel-> Java -> Java Applet Runtime Settings
Click on View.
Add the Java runtime Parameter value: Xmx200.
It is not a machine specific issue however it is intermittent.
Please advice.
Regards,
Pradnya Kokil

Hi Pradnya,
Following solutions might help you to resolve the issue.
Solution1:
To achieve optimum performance, the developer should limit the number of new windows that can be opened using the OpenDocument function, particularly if using it within the drill function.
If you must open a new window each time, you can increase the number of document instances available on the system by modifying parameters in the webi.properties file:
1. On the Business Objects server, navigate to the following directory:
C:\Program Files\Business Objects\Tomcat\webapps\businessobjects\enterprise115\desktoplaunch\WEB-INF\classes
2. Open the webi.properties file using a text editor.
3. Uncomment the FAILOVER_SIZE=10 line by removing the # from the beginning of the line.
4. After FAILOVER_SIZE, add the following:
STORAGE_TOKEN_STACK_SIZE=40
5. Save the file.
6. Restart the application server
Solution2:
Do not use Control Key + N or File New from Browser for invoking new instance of Browser
Avoid opening Infoview by Hyperlinks.
Alternatively, by setting logontoken.enabled property in web.xml for desktop.war, will stop users allowing using old token
Locate web.xml file in desktop.war file deployed on your application server
Locate the following string in web.xml:<param-name>logontoken.enabled</param-name>
Change the <param-value> for logontoken.enabled from true to false (forexample, <param-value>false</param-value>)
Save and close the file
Restart the web application server to apply the changes
Regards,
Sarbhjeet Kaur

Invoice hold workflow is not fetching the approver from ame

Hi,
I'm trying to get the next approver(3rd level) in wf process from ame through profile option, but it's not fetching the approver.
my query is
SELECT persion_id||employee_id
FROM fnd_user
WHERE employee_id = fnd_profile.VALUE('MG_AP09_PAYABLES_SUPERVISOR')
other two level approvers (level1 and level 2)I'm getting , which is not through profile but direct join of tables as given below
SELECT 'person_id:'|| rcv.EMPLOYEE_ID
FROM ap_holds_all aph
,po_distributions_all pd
,rcv_transactions rcv
WHERE pd.line_location_id = aph.line_location_id
AND pd.PO_DISTRIBUTION_ID= rcv.PO_DISTRIBUTION_ID
AND aph.hold_id = :transactionId
AND transaction_type = 'DELIVER'
SELECT 'person_id:'|| HR2.attribute2
from ap_holds_all AH
,po_line_locations_all PLL
,hr_locations_all HR1
,hr_locations_all HR2
where pll.line_location_id = AH.line_location_id
AND pll.ship_to_location_id = HR1.location_id
AND nvl(HR1.attribute1,HR1.location_id) = HR2.location_id
AND AH.hold_id = :transactionId
what may be the issue?

Hi Surjith,
Please look at the code I have written in the user exit, which is just for testing purpose. In SPRO I set workflow as 9 for all the release codes.
IF i_eban-werks = '1000'.
actor_tab-otype = 'US'.
actor_tab-objid = 'S_RITESH'.
APPEND actor_tab.
CLEAR actor_tab.
ENDIF.
In PR I am getting the user name in processor coloumn correctly.
please let me know if I am going wrong.
Thank you.

Iam not getting the document in production order

HI,
Iam created a document (cad drawing)in CV01N and this document is assigned to BOM item category D.
created production order and released .here iam not getting the document overview in production order heade details.
Any setting for document?give me solution

Hi Naresh,
You can view the dms documents at purchase order item level not in header. Hope this will resolve the query.
Regards,
Ravindra

I have been working on a document in Pages 4.3 and now it tells me I can not open the document unless I upgrade to Pages 5.2. When I look up Pages 5.2 the App store says "installed" nor can I find a "purchase" or "install" button.

My OS is 10.9.3.I've been working on a document in Pages 4.3. Now is says I can not open the document unless I upgrade to Pages 5.2. The Pages 5.2 page in the App store says "installed" nor can I find a "purchase" or "install" button. How do I get Pages 5.2?

If you have already updated to Pages 5.2 on your Mac, you may be trying to open the file with a previous version of Pages. If this is the case, you have two versions of Pages on your Mac & are trying to open Pages 5 documents with Pages 4. Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there then right-click on the Dock icon & select Options > Keep in Dock.
Installing new versions of iWork has never replaced existing versions. This is nothing new. The only thing new is that the '09 apps are moved to an iWork '09 folder if they were purchased from the Mac App Store. If they were installed from disk they should already be in a separate folder in Applications.

Error - Could not place the document 'IMG_1664.MOV' because no parser...

I am trying to open a video to edit within Photoshop CS6 x64. I am getting the following message:-
Could not place the document ‘IMG_1664.MOV’ because no parser or file format can open the file.
The video was shot on my iphone 4S and ive even tried converting to other formats yet Photoshop still gives the same error. I have checked through Bridge and I have no option to send to Photoshop on the right click menu. Can anyone help as Im desperate to try out the new features of CS6 for video editing.
I am running a 27" iMac with 12gb RAM and 1gb of Video RAM. Any help would be very much appreciated as im at a complete loss and there seems to be very little about this problem on the net at the moment. I am also running Lion if that helps.
Thanks
James

I was getting the same error message when trying to instal a simple brush in CS6 64bit, I saved my work and backed out of the program and opened the regular (i'm guessing 32 bit) program and tried to instal them there. It worked no problem. That would be my suggestion to you to see if it is an error in both formats of CS6 and if it works, it might be something to let adobe know is an error that needs be fixed or at least addressed to the general public as to why it won't work. I beleive you should have received both version with your install. I did anyways.
Best wishes

An error has occurred: Could not find the document.

I get the "An error has occurred: Could not find the document." error when trying to open a URL using OpenDocument. The URL is as follows:
http://:<myserver>8080/BOE/OpenDocument/opendoc/openDocument.jsp?iDocID=AZjCUhaL3c9Is.YxtGMc7K4&sIDType=CUID
I am certain the value of iDocID is correct, and I am also certain that I can get an OpenDocument to work on the server. In fact, I tried the same URL using a different iDocID for a Webi report in a different folder, and it works. For some reason, it appears as though the report in this folder won't open though.
Any thoughts on this would be greatly appreciated. I've been working on this for a couple of days an am completely stumped. Also, I'm relatively new to Business Objects. Is there a log file that I can view that might give me more details regarding the error?
Thanks in advance for your help!

May be that the user who is accessing the report does not have sufficient rights to view it.
Check whether you are able to view the document as an administrator.
Regards,
Niraj

Why is this query not using the index?

check out this query:-
SELECT CUST_PO_NUMBER, HEADER_ID, ORDER_TYPE, PO_DATE
FROM TABLE1
WHERE STATUS = 'N'
and here's the explain plan:-
1
2     -------------------------------------------------------------------------------------
3     | Id | Operation | Name | Rows | Bytes | Cost (%CPU)|
4     -------------------------------------------------------------------------------------
5     | 0 | SELECT STATEMENT | | 2735K| 140M| 81036 (2)|
6     |* 1 | TABLE ACCESS FULL| TABLE1 | 2735K| 140M| 81036 (2)|
7     -------------------------------------------------------------------------------------
8
9     Predicate Information (identified by operation id):
10     ---------------------------------------------------
11
12     1 - filter("STATUS"='N')
There is already an index on this column, as is shown below:-
     INDEX_NAME INDEX_TYPE     UNIQUENESS     TABLE_NAME     COLUMN_NAME     COLUMN_POSITION
1     TABLE1_IDX2 NORMAL     NONUNIQUE     TABLE1      STATUS     1
2     TABLE1_IDX NORMAL     NONUNIQUE     TABLE1     HEADER_ID     1
So why is this query not using the index on the 'STATUS' Column?
I've already tried using optimizer hints and regathering the stats on the table, but the execution plan still remains the same, i.e. it still uses a FTS.
I have tried this command also:-
exec dbms_stats.gather_table_stats('GECS','GEPS_CS_SALES_ORDER_HEADER',method_opt=>'for all indexed columns size auto',cascade=>true,degree=>4);
inspite of this, the query is still using a full table scan.
The table has around 55 Lakh records, across 60 columns. And because of the FTS, the query is taking a long time to execute. How do i make it use the index?
Please help.
Edited by: user10047779 on Mar 16, 2010 6:55 AM

If the cardinality is really as skewed as that, you may want to look at putting a histogram on the column (sounds like it would be in order, and that you don't have one).
create table skewed_a_lot
as
   select
      case when mod(level, 1000) = 0 then 'N' else 'Y' end as Flag,
      level as col1
   from dual connect by level <= 1000000;
create index skewed_a_lot_i01 on skewed_a_lot (flag);
exec dbms_stats.gather_table_stats(user, 'SKEWED_A_LOT', cascade => true, method_opt => 'for all indexed columns size auto');Is an example.

Could not save the document to the repository for the following reason

Hi,
Some of the Scheduled reports are getting failed because of the following Error.
Could not save the document to the repository for the following reason: [repo_proxy 30] InfoStore::ObjectExport::commit - (Helpers::InfoStore::ObjectExport::commit) File Repository Server error : Failed to put the file to file server: frs://Output/a_242/027/084/5512178/aduu8vtfkntmvyv8lsnntas.wid already exists.(hr=#0x80042a4a)(Error #-2147210678 (WIS 30567)
i have searched about this but no use no information on the same.
So Pls let me know why this problem will occur and how to resolve this,I am new to this forum if any this is wrong pls let me know
Thanks in advance,

HiShwetabh Suman
Thanks a lot for immediate response,
Please go through the following
From the logs I see a difference in the execution steps as below:
[2014-03-31 10:24:15,364] [TID:13] [INFO ] [child.RunStatusTimerTask.run():17]: calling checkRunStatus
[2014-03-31 10:24:31,887] [TID:3168] [INFO ] [child.ChildImpl.request():23]: request: [GetLoad]
[2014-03-31 10:24:31,888] [TID:3168] [INFO ] [child.ChildImpl.request():25]: response: [1]
[2014-03-31 10:24:37,879] [TID:3153] [ERROR] [webi.PublishingSubsystem.run():93]: Throwable exception caught:
com.businessobjects.rebean.wi.ServerException: Could not save the document to the repository for the following reason: [repo_proxy 30] InfoStore::ObjectExport::commit
- (Helpers::InfoStore::ObjectExport::commit) File Repository Server error : Failed to put the file to file server:
frs://Output/a_165/024/084/5511333/aqew_jeqdcjcrukoadjdtk0.wid already exists.(hr=#0x80042a4a)(Error #-2147210678 (WIS 30567)
Can you please help us understand the reason why the child.runstatustimertask.run() is called in the case where we get the failure. Because upon noticing the difference in the steps of execution I see that this method is called and after that the failure is occuring.
Also, few other findings are that :
1. The error occurs from both the nodes adaptive job servers randomly.
2. The IFRS and OFRS of one of the node is not being used at all for any file transfers (though the configurations are exactly same).
Please advise and help us get rid of the said error.
Can u give any permanent solution for us

Getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

Without knowing anything about your system, your image file, your working document and so on nobody can even begin to guess. The file could be damaged, there could be color management issues at play and what have you...
Mylenium

Depreciation Run Error "Not all the documents in the last posting run were

Hi,
When I tried to run depreciation, I found the error message as below.
"Not all the documents in the last posting run were posted"
How do I solve the problem?
Please advise me..
Thank you for your help..
Jake

Hi,
For an Update termination you need to go into the System Log to check the real cause of the termination.
My guess is that the document number has already been used. It has happened to me and I found no cause for that.
I did the following then:
I checked the highest used document number in that number range and corrected the from number of the number range.
Then I went into the TABA table and corrected the entries there that they corresponded to the number range.
Then I did a manual reconcilliation between AA and GL. In my case they matched, If they don't you would need to post manually to the GL to get them to match.
Then I ran recalculation of asset values. and finally an unplanned depreciation run.
For me it solved the problem.
Br
Cricke

RSBBS jump query not fetching the document no in R3

Similar Messages

Maybe you are looking for