RSBOLAP 018 Error In WAD

Hi Experts, i am using BI 7.0. And am trying to execute reports from WAD. However it always gives an error saying
"RSBOLAP 018 Java System Error: An unknown error has occoured during portal communication" while opening the report and
"RSBOLAP 018 Java System Error: Incoming call not authorised" while executing the report.
I read SAP Note 937697 and executed the support tool to receive the following error.
RED: BI Mastersystem
Error: Error while connecting to BI mastersystems via RFC. java.lang.RuntimeException: Native connection to banckend system is broken
Solution: Check connection properties in Portal Systemlandscape category 'Connector' (Systemlandscape / SAP_BW)
I checked on the same...and all seems correct...also the connectivity tests in the BI Portal pass
Please help

Sorry, I forgot to mention that I also solved the problem.
In the case someone else is going to have this issue here some quick hints:
1) If you have an add-in installation AS ABAP+Java with both using the same <SID> you need to recreate the SSO keys with an alternative <SID>. Note that you need to restart the system afterwards.
2) I also needed to manually change the ACL certificate in STRUSTSSO2 to the right client.
3) Finally I had to install a correction mentioned in a note (937697)
I hope this will save some time for the next person with these problems.
In case all my remarks didn't help note 917950 is a good starting point.
Especially have a look at the attached pdf, it is a nice illustration of the required settings.
Regards,
Minima

Similar Messages

Error RSBOLAP 018 WAD 7.0

Hi,
I tried to execute my Web-Template and I always get this error:
RSBOLAP 018 : call FM RSWR_TEMPLATE_PROCESS_PROXY to Progld CHSFSR00070_PORTAL_BW on Host CHSFSR00070 with SSO not authorized: Authentication
What is missing in the Portal configuration? Please Help.
Pascal

HI Pascal,
Read SAP Note 916090 to overcome the error of RSBOLAP 18
Cheers:-)
Vivek

RSBOLAP 018 Java system error in BEx Web Application Designer

Hello,
while doing inside BEX Web Application Designer "validation of webtemplate" with
command "validate on server" I get following error message of WAD :
" Message RSBOLAP 018 description : Java system error : an Unknow Error occured during portal communication"
My procedure till now was ( please see results as screenshots in attachment) :
a) ckecking prerequisites for "Java template installer'" --> result "prerequisites.jng"
b) running "Java template installer" -> " result templateInstaller.jpg"
c) running Bex Web Application Designer as mentioned above results in error
message as mentioned above
d) running Diagnostic & Support Desktop Tool --> "result Diagnostic support desktop tool.jpg"
It says that something is wrong with "BI Mastersystem" because of failed connect to
message server.
Please advice me what I should do.
Thanks in advance
Regards,
Oscar

Hello
It is obvious that the connection between the ABAP and the Java is not working.
There should be a JCo RFC from the portal side to the ABAP stack set up and an RFC from the ABAP stack to the portal.
Check the entries of the table RSPOR_T_PORTAL
The RFC specified here should be the one mentioned above (ABAP - Java)
Check the name of the system should be SAP_BW
Is the parameter icm/host_name_full set on the ABAP stack with the domain name ?
Connect to the BI portal:
http://FQDN:5NN00/irj/portal
Navigate to system administration -> system configuration -> system landscape -> expand "portal content" -> systemlandscape -> SAP_BW
Right click on SAP_BW - Open - Object
Here you need to maintain these:
ITS Description - BW ABAP Logical System Name - Tx SCC4 or BD54
ITS Host Name - FQDN_OF_BW_ABAP:port - You can use the value of icm/host_name_full parameter and retrieve port number from Tx SMICM - Services
ITS Path - /sap/bc/gui/sap/its/webgui
ITS Protocol - Select http
Logical System Name - BW ABAP Logical System Name - Tx SCC4 or BD54
Logon Method -SAPLOGONTICKET
Message server - BW ABAP FQDN
SAP Client - BW ABAP Client Number
SAP System ID (SID) - BW ABAP SID
Server Port - 39NN
Web AS Description - BW ABAP Logical System Name - Tx SCC4 or BD54
Web AS Host Name - FQDN_OF_BW_ABAP:port - icm/host_name_full and retrieve port number from Tx SMICM - Services
Web AS Path - /sap/bw/BEx
If everything is set properly then do a test connection.
Good Luck
RB

Error in WAD Report

Hi,
We have Report in WAD 3.5.
We are getting below error while navigating the report liek filtering on G/L account. This error occurs only while data loading is taking place in the cube.
Error Message:
'' InfoCube ZABC_GL was compression. Read request cannot be executed''
'' Error while reading data; navigation is possible''
'' Expanded node has no displayed lover-level node, will become leaf''
'' An error has occured during loading. Please look in the upper frame for further information''
Please advise.
Best Regards,
UR

Hi,
Any advise please.
Further information, in case it is relevant. While uploading data, we are creating/deleting indexes and performing Roll-up & Collapse/compress.
Looking forward your advise.
Best Regards,
UR

Error in Wad

hi all
i am getting this error while running the report in WAD
"System error in program SAPLRRS2 and form SELOPT_ASSIGN-01- "
what does this error means and what steps i shuld follow?
shalini

Shalini,
What is the version on which you are working with. This is a program error. It may occur if a query that was already created in 3.x contains one of the variables like 0REQUID..
and further selection option variable for a further char.If more than one value is entered in the selection option variable, the query terminates with the above error message.
Note that you must generate the query again after you have implemented the correction (Transaction RSRT1 > Generate report).
Also check the SP level implemented.
Please refer note number 907533. It may be of some help to you.

Error in WAD Template when no data.

Hi All!!
I'm working with BW 7 SP 15
I have a query that has the characteristic 0FISPER in the Columns side, above the key figures, so the query displays the data per month.
The problem is when I include this query into a WAD Template and I set the property "new lines" to 1, when this template is executed and the result is empty the following error appears (only when there're no data to display and only when 0FISPER is above key figures, when I put 0FISPER on rows side, It does it correctly):
Invalid state: Section I is valid, but neither II nor III.
java.lang.RuntimeException: Invalid state: Section I is valid, but neither II nor III.
at com.sap.ip.bi.webapplications.ui.items.analysis.virtualmatrix.impl.VirtualMatrixBlockMerge.init(VirtualMatrixBlockMerge.java:137)
at com.sap.ip.bi.webapplications.ui.items.analysis.control.AcPivotTableExport.validateRendering(AcPivotTableExport.java:510)
at com.sap.ip.bi.webapplications.ui.items.analysis.control.AcPivotTableInteractive.buildUrTree(AcPivotTableInteractive.java:325)
at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:33)
at com.sap.ip.bi.webapplications.ui.framework.base.composites.UiRootContainer.iterateOverChildren(UiRootContainer.java:40)
Query String (Current Browser Request) BI_COMMAND=&BI_COMMAND-BI_ADVANCED=DLG_VARIABLE_DropdownVariants&BI_COMMAND-BI_COMMAND_TYPE=PASSIVE_VALUE_TRANSFER&BI_COMMAND-PASSIVE_ID=DLG_VARIABLE_DropdownVariants_combobox&BI_COMMAND-PASSIVE_VALUE=&BI_COMMAND-TARGET_DIALOG_REF=DLG_VARIABLE&BI_COMMAND_1=&BI_COMMAND_1-BI_ADVANCED=DLG_VARIABLE_VAR_1_INPUT&BI_COMMAND_1-BI_COMMAND_TYPE=PASSIVE_VALUE_TRANSFER&BI_COMMAND_1-PASSIVE_ID=DLG_VARIABLE_VAR_1_INPUT_inp&BI_COMMAND_1-PASSIVE_VALUE=1&BI_COMMAND_1-TARGET_DIALOG_REF=DLG_VARIABLE&BI_COMMAND_2=&BI_COMMAND_2-BI_ADVANCED=DLG_VARIABLE_VAR_2_INPUT&BI_COMMAND_2-BI_COMMAND_TYPE=PASSIVE_VALUE_TRANSFER&BI_COMMAND_2-PASSIVE_ID=DLG_VARIABLE_VAR_2_INPUT_inp&BI_COMMAND_2-PASSIVE_VALUE=10&BI_COMMAND_2-TARGET_DIALOG_REF=DLG_VARIABLE&BI_COMMAND_3=&BI_COMMAND_3-BI_ADVANCED=DLG_VARIABLE_VAR_3_INPUT&BI_COMMAND_3-BI_COMMAND_TYPE=PASSIVE_VALUE_TRANSFER&BI_COMMAND_3-PASSIVE_ID=DLG_VARIABLE_VAR_3_INPUT_inp&BI_COMMAND_3-PASSIVE_VALUE=009.2009-009.2009&BI_COMMAND_3-TARGET_DIALOG_REF=DLG_VARIABLE&BI_COMMAND_4=&BI_COMMAND_4-BI_ADVANCED=DLG_VARIABLE_VAR_4_INPUT&BI_COMMAND_4-BI_COMMAND_TYPE=PASSIVE_VALUE_TRANSFER&BI_COMMAND_4-PASSIVE_ID=DLG_VARIABLE_VAR_4_INPUT_inp&BI_COMMAND_4-PASSIVE_VALUE=v1&BI_COMMAND_4-TARGET_DIALOG_REF=DLG_VARIABLE&BI_COMMAND_5=&BI_COMMAND_5-BI_COMMAND_TYPE=OK&BI_COMMAND_5-TARGET_DIALOG_REF=DLG_VARIABLE&REQUEST_ID=1
Query String (Current Server Request) BI_COMMAND-BI_COMMAND_TYPE=UPDATE
Query String (Initial Browser Request) DUMMY=0&TEMPLATE=ZIP_WCO003_NOSIRVE
RTL false
Request URL http://achmexdvw1.mx.achfood.com:50200
SAP_BW_IVIEW_ID pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex
SAP_EXTERNAL_SID FMZuPSJbo1ORoV1*1wciywSsHHVBVUbgIy5fjefoHQTA
THEME_NAME captest
TRACE false
TRAY_TYPE PLAIN
Template (Main Object) BTMP ZIP_WCO003_NOSIRVE
Template (Main) ZIP_WCO003_NOSIRVE
Template Parameters <parameterList>
<param name="BODY_ONLY" value="X"/>
<param name="CHECK_POPUP_BLOCKER" value="X"/>
<param name="DATA_MODE" value="NEW"/>
<param name="DOCUMENT_SAVE_LEVEL" value="0"/>
<param name="ERRORS_VISIBLE" value="X"/>
<param name="INFORMATION_VISIBLE" value="X"/>
<param name="ITEMS_STATELESS" value="false"/>
<param name="MELT_VARIABLES" value="X"/>
<param name="REPORT_REPORT_DISPLAY_TARGET" value="X"/>
<param name="RRI_OPEN_MODE" value="OPEN_IN_SEPARATE_WINDOW">
 <param name="OPEN_IN_SEPARATE_WINDOW" value=""/>
</param>
<param name="START_STATELESS_INTERVAL" value="0"/>
<param name="STATELESS" value="false"/>
<param name="SYSTEM_MESSAGES_VISIBLE" value="X">
 <param name="SYSTEM_MESSAGES_DISPLAY_MODE" value="ALWAYS"/>
</param>
<param name="TEMPLATE_VERSION" value="1"/>
<param name="USE_CONTEXT_MENU_SNIPPETS" value="X"/>
<param name="USE_LAYERED_WINDOWS" value="X"/>
<param name="USE_SPECIFIC_VARIANT_CATALOG" value="X"/>
<param name="WARNINGS_VISIBLE" value="X"/>
<param name="WINDOW_MODE" value="modal"/>
</parameterList>
com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error while generating HTML at com.sap.ip.bi.webapplications.ui.items.UiItem.render(UiItem.java:365) at com.sap.ip.bi.webapplications.runtime.rendering.impl.ContainerNode.render(ContainerNode.java:63) at com.sap.ip.bi.webapplications.runtime.rendering.impl.PageAssemblerRenderingRoot.processRendering(PageAssemblerRenderingRoot.java:52) at com.sap.ip.bi.webapplications.runtime.impl.Page.buildRenderingTree(Page.java:4080) at com.sap.ip.bi.webapplications.runtime.impl.Page.processRenderingRootNode(Page.java:4135) at com.sap.ip.bi.webapplications.runtime.impl.Page.processRendering(Page.java:3796) at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:3756) at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2661) at com.sap.ip.bi.webapplications.runtime.impl.Page.doServerRedirect(Page.java:3438) at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:3662) at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2661) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:978) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:864) at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:488) at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:22) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215) at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753) at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240) at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524) at java.security.AccessController.doPrivileged(Native Method) at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)Caused by: java.lang.RuntimeException: Invalid state: Section I is valid, but neither II nor III. at com.sap.ip.bi.webapplications.ui.items.analysis.virtualmatrix.impl.VirtualMatrixBlockMerge.init(VirtualMatrixBlockMerge.java:137) at com.sap.ip.bi.webapplications.ui.items.analysis.control.AcPivotTableExport.validateRendering(AcPivotTableExport.java:510) at com.sap.ip.bi.webapplications.ui.items.analysis.control.AcPivotTableInteractive.buildUrTree(AcPivotTableInteractive.java:325) at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:33) at com.sap.ip.bi.webapplications.ui.framework.base.composites.UiRootContainer.iterateOverChildren(UiRootContainer.java:40) at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:36) at com.sap.ip.bi.webapplications.ui.advancedcontrols.bridge.AcItemBridge.iterateOverChildren(AcItemBridge.java:61) at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:36) at com.sap.ip.bi.webapplications.ui.unifiedrendering.controls.FlowLayoutItem.iterateOverChildren(FlowLayoutItem.java:63) at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:36) at com.sap.ip.bi.webapplications.ui.unifiedrendering.controls.FlowLayout.iterateOverChildren(FlowLayout.java:69) at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:36) at com.sap.ip.bi.webapplications.ui.framework.base.composites.UiRootContainer.iterateOverChildren(UiRootContainer.java:40) at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.process(CompositeBuildUrTreeTrigger.java:36) at com.sap.ip.bi.webapplications.ui.framework.base.impl.CompositeBuildUrTreeTrigger.start(CompositeBuildUrTreeTrigger.java:59) at com.sap.ip.bi.webapplications.ui.framework.base.impl.ExtendedRenderManager.triggerComposites(ExtendedRenderManager.java:69) at com.sap.ip.bi.webapplications.ui.framework.base.impl.BICompositeManager.renderRoot(BICompositeManager.java:79) at com.sap.ip.bi.webapplications.ui.items.UiItem.render(UiItem.java:363) ... 46 more
Thnks for your help!!!
Yolanda.

Hi Yolanda,
it´s as you already figured out - 0FISCPER is the problem.
When you want to create new lines, there can not be a dynamic characteristic in the columns. Each column has to be defined with single values.
Try to create restricted key figures for the periods you need to show.
regards
Cornelia

Bi exceotion error on WAD

hai all,
    here is the error i got while publishing a webtemplate on portal..
HELP ME PLEASE...
        while publishing the web template on the portal (WAD)...I get the bi exception error as described below..
     some times report is opening fine on portal ,when i make some selection from the dropdwn also it works ,,but at one point of time on the dropdown selection i get the
error. so i refresh, it works .again i navigate the report.. then i get the same error so again refresh ....
       when i do the same again and again the frequency of getting these error becomes more ....at one point of time the report itself is not opening on
portal..And everytime i get different error message as follows..
1.Message:
Error while generating HTML
2.Message: No connection possible to BI master system DB7CLNT800 3.Message: Error while executing function module: RSBOLAP_BICS_STATISTIC_INFO    4.message
Concurrent call. Connection currently used in another thread.
Message: 5.JCo exception thrown when connecting to system "DB7CLNT800"                      ...............................................................
The detailed error:
1. Exception in BI runtime
Initial cause
Message:
CPIC-CALL: CMSEND on convId: 24803423LOCATION    CPIC (TCP/IP) on local host with UnicodeERROR       connection to partner 'blade07.wipro.com:3300' brokenTIME        Mon Mar 03 10:05:28 2008RELEASE     700COMPONENT   NI (network interface)VERSION     38RC          -6MODULE      nixxi.cppLINE        3797DETAIL      NiIWriteSYSTEM CALL WSASendERRNO       10054ERRNO TEXT WSAECONNRESET: Connection reset by peerCOUNTER     30
Stack trace:
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: CPIC-CALL: CMSEND on convId: 24803423LOCATION    CPIC (TCP/IP) on local host with UnicodeERROR       connection to partner 'blade07.wipro.com:3300' brokenTIME        Mon Mar 03 10:05:28 2008RELEASE     700COMPONENT   NI (network interface)VERSION     38RC          -6MODULE      nixxi.cppLINE        3797DETAIL      NiIWriteSYSTEM CALL WSASendERRNO       10054ERRNO TEXT WSAECONNRESET: Connection reset by peerCOUNTER     30     at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)

Hi,
I recommend you to implement the following Note:
1045008 RRK_LIST_OPEN: CX_SY_REF_IS_INITIAL UNCAUGHT_EXCEPTION
It seems this as the typical case that the Abap-Java Communication
was not restarted perfectly. We have for this purpose
various notes in order to help here:
917950: SAP NetWeaver 2004s: Setting Up BEx Web (Overview)
888687: Java BEx Web: Analysis of Communication / logon problem's
937697: Usage of of BI SAP NetWeaver diagnostics & Support Desk
Tool (Dump Comm. Settings plus traces)
Further notes:
https://bis.wdf.sap.corp/twiki/bin/view/Sapinternal/BISuiteNotes
If the error still exists, please run the support desk tool as per note
937697, in the systeminfo.txt file you will see outlined the issues
Try to solve the issues using notes 917950, and 888687.
If useful please allocate some points.
Regards,
Suman Raju

Error in WAD 7.0

I am getting an error "unable to generate entry" when i try to save a template in WAD 7.0
How do i solve it?

Hi,
check it, whether it solves the problem.
/people/prakash.darji/blog/2006/07/26/troubleshoot-the-sap-netweaver-2004s-bi-frontend-installation
/thread/237662 [original link is broken]
Regards,
Senthil Kumar.P

Error in WAD - CL_RSR_RRK0_ATTR_C and form CHECK_ALVL-01

Hi,
I'm trying to publish a Business Content web template. but I get the following error :
System error in program CL_RSR_RRK0_ATTR_C and form CHECK_ALVL-01- (see long text).
- I've checked the query and it runs successfully.
- This is a business content template and all components are installed
- there was an error on an exception which was created - I corrected this.
- there was a warning as a hierarchy which was specified didn't exist so I removed this.
- I regenerated the query in RSRT before rerunning it from WAD
- When I execute the query from RSRT by clicking ABAP Web, it runs.
So the error message seems to point to the Web template but when I open this it says only template text can be edited, it doesn't show me the actual template. Any ideas how I can troubleshoot this?
Thanks
Sue

Hi,
Other web templates are able to display without issues so I don't think its the configuration causing the problem. I've checked through the note you suggested and all config seems correct.
Regards
Sue

Java.lang.UnsupportedOperationException Error in WAD Template

Hi Frnds,
My WAD Template and the default template to execute Query is working fine for all the Query. But there is only one Query For which when am trying to execute it in portal it's working fine for some selection(when there is no data) and for some selection criteria it's showing "500 Internal Server Error - java.lang.UnsupportedOperationException" error. But the Query is working fine in the TCODE-RSRT.
500 Internal Server Error
Information for Administrator:
To avoid this exception see the steps below. To help SAP better investigate this issue, you will need to provide the diagnostic information from these steps.
1. Most likely, the issue you are experiencing has already been corrected. Please make sure that the most recent patch level is deployed on your system according to notes 1033246 and 1011241. Starting with SAP NetWeaver 7.0 Support Package Stack 16 patch level 30, BI Java is delivered according to the synchronized delivery process described in the note 1164789.
2. Please ensure that NetWeaver Business Intelligence Diagnostics & Support Desktop Tool does not report any issues on your server according to note 937697. You can start it by clicking here (administrator permissions are required).
3. When opening any customer message on this issue, please attach:
Support Desktop Tool support info ZIP file according to note 937697,
Required information for reproduction according to note 948490.
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause:
The initial exception that caused the request to fail was:
java.lang.UnsupportedOperationException
java.lang.UnsupportedOperationException
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.selection.ComponentList.getSingleMembers(ComponentList.java:987)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.MemberAccessComparator.prepare(MemberAccessComparator.java:91)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.resultset.RsAxisTupleElementComparator.prepare(RsAxisTupleElementComparator.java:43)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QvSorting.prepareForTupleElementSorting(QvSorting.java:317)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.resultset.RsAxis.sortTuples(RsAxis.java:2013)
So please help

Hi,
please implement the ABAP correction of note:
1413377 : java.lang.UnsupportedOperationException
Import Support Package 22 for SAP NetWeaver 7.0 BI Java into your
BI system.
The Support Package is available when Note 1404367 "SAPBINEWS 7.0
BI JAVA Support Package 22", which describes this Support Package
in more detail, is released for customers.
In urgent cases, you can implement the correction instructions by
applying BI Java patches:
Apply the BI Java patch Support Package 20 Patch 30 for SAP
NetWeaver 7.0 BI Java to your BI system.
Support Package 20 Patch 30 is available when Note 1404370
"Released - NW 7.0 Support Package Stack 20 Patch 30 note for BI
Java", which describes this patch in more detail, has been
released for customers.
See Note 1033246 for the planned delivery dates of all BI Java
patches.
Regards,
Venkat
Edited by: Venkadesh S on Sep 23, 2011 5:12 PM

Errors from WAD when using template

Question 1
How can the following errors be fixed or removed from WAD when the template 0ANALYSIS_TEMPLATE is retrieved. All objects have been activated:
E260 Template Include Item HEADER_TEMPLATE unresolved or empty. Close and reopen template.
E260 Template Include Item FOOTER_TEMPLATE unresolved or empty. Close and reopen template.
W155 Width of Object item:CONTAINER_LAYOUT_ITEM:CONTAINER_LAYOUT_CONTENT is very small (1)
Question 2
According to OSS note 1048857:
Import Support Package 14 for SAP NetWeaver 7.0 BI (BI Patch 14 or SAPKW70014) into your BI system
Is is this referring to using SNOTE for this particular problem? SP 14 has not yet been released.
What is it referring to?
Question 3
How do I get to the portal system and get to the PCD? Is there some sort of authorizations that should be set to get to the protal as the EP user Admin.
null

Please activate all BEx Web templates (BTMP) that begin with '0'. Please activate all Reusable Web items (BITM) which' begin 'with '0'. After this you should restart the J2EE Engine. This will solve your problems.
Regarding the note - It means that the issue "Object 'BTMP:0ANALYSIS_PATTERN' refers to the invalid object 'QU:" can be ignored now. This error message will not come in SP14 (whenever its released).

Error at WAD

Please use an appropriate title - you have mentioned WAD but your post talks about report designer
in WAD i am trying to get report designer, i am getting belwo error, please let me know how can i resolve
W392 Element REPORT_ITEM_1 requires a mandatory descendant parameter 'REPORT' in path 'bi:REPORT_ITEM/'.
Edited by: Arun Varadarajan on Mar 20, 2009 12:32 PM
Edited by: Arun Varadarajan on Mar 20, 2009 12:33 PM

Hi Suneel,
Please add below line to your Report web Item.
 <bi:REPORT value="DEFAULT" text="" />
Example,
<bi:REPORT_ITEM name="REPORT_ITEM_1" designheight="500" designwidth="500" >
<bi:REPORT value="DEFAULT" text="" />
 <bi:REPORT_DATA_BINDING_LIST type="ORDEREDLIST" />
 </bi:REPORT_ITEM>
Basically, you have to assign a report designer report at this tag.
Regards,
-Vj

ABEND RSBOLAP (000): error in class SAPMSSY1 method - after report move Pro

Hi Guys,
We recently moved a report to production and got the following error (500 Internal Error) when executing from Query designer
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
I saw in one of the threads to run the Program RSPOR_SETUP and see if all the 12 steps are ok and they are not but they are not ok in Dev and Qua as well where its running fine. Appreciate if somebody can advise.

Hi,
Check your Query in RSRT properties tab and make necessary settings.
Do OLAP check in RSCRM_BAPI t-code. It will show the inconsistencies in your query.......
Regards,
Suman

BI EXCEPTION ERROR ON WAD

hai ,
    when i am executing a web template on portal on WAD,
i am getting a BI EXCEPTION RUNTIME ERROR ....some times i could see the report on portal .but further when i navigate through some web items like dropdown and checkbox etc, i am getting the same error...
               can anyone help me please...
THANKS AND REGARDS,
         siva

Hi,
BI EXCEPTION ERROR is common error message..please check the detailed log.there you can get some hint to resolve the issue.Please check run the support desk tool as per note 937697 and ensure that the BW-Portal configuration is correct.Execution of WAD in portal requires correct config of BI-EP.
Rgds
Manoj Kumar

Error in WAD 7.10 (Release 2004S)

We are trying to open the existing Web Templates (created in 3.0B) in WAD 7.10 but we cannot do so. It is not showing anything under the 'Roles' tab and
it does not get any objects when we search using 'Find'. But if we use
the WAD (SAP BW 3.x) we can still see them.
Has anybody faced this problem before?
Thanks,
Rajib

Hi Rajani,
Am i right in saying that BEx Web Applications in which certain customer-specific enhancements (e.g. Table Interface, custom Java-Script) were made cannot be automatically converted with SAP NetWeaver 2004s BI WAD. Manual adaptation might be necessary to ensure the proper behavior of the web application. Thanks for the information.
Regards,
Anil

RSBOLAP 018 Error In WAD

Similar Messages

Maybe you are looking for