RSCRM: Query date with customer exit variable

Hi All,
Is there any way to run the RSCRM transaction with a query with a customer exit variable for a date characteristic?
The issue is that the query ran ok but the variable is not being updated when the RSCRM query is running with a background job or a process chain.
Thanks in advance
EV

I do not think you can select Customer Exit variable, if you see the type is selected to Char Value Variables and it is not editable.
It would be suggested to go for Customer Exit procesing type for your text variable.
Cheers,
Neel.

Similar Messages

Problem with customer exit variable in BeX Query

Hi All,
We have created a customer exit variable in a query and populated with few patterns in customer exit.
My query has to bring all the records where the address line is containg the patterns passed through customer exit. Here the query is not working as expected.
It is bringing the values where the address line is exactly same as the pattern and not bringing the records where the pattern is part of the address line.
For example: Pattern passed in customer exit = 'HOSPITAL'
The record where address line = 'HOSPITAL' is shown in the rpeort, where the record with address line = 'HOSPITAL ROAD' is not shown in the report.
I would appreciate your help on this.
Regards,
Rakesh

Hi Diogo,
Below is the code I am using in the customer exit.
SELECT * FROM zae_tt_pbuild INTO TABLE gt_pbuild.
      IF sy-subrc = 0.
        LOOP AT gt_pbuild INTO gs_pbuild.
          CONCATENATE '*' gs_pbuild-pbuild '*' into lv_pattern.
          ls_range-low = lv_pattern.
          ls_range-sign = lc_sign_i.
          ls_range-opt = 'CP'.
          APPEND ls_range TO e_t_range.
          CLEAR: ls_range,
                 lv_pattern.
        ENDLOOP.
      ENDIF.
     ENDIF.
I have tried using '%' instead of '*' aswell but the result is same.
Thanks,
Rakesh

Problem with customer exit variable on date range

Hi All,
I have customer exit variable on date range. In the selection screen it has to give the week range as a default (05/21/2009 to 05/27/2009).
Earlier its working fine and from yesterday onwards it is not working properly. yesday onwards default date range was not displaying in selection screen.
Wht would be the problem.
Thanks in Advance

Hi Ashish,
I checked every thing what u told earlier. Every thing is fine.
And another thing is
I have routine in infopackage level. Since day before yesterday it was working fine and yesterday onwards it was not working.
Eg: budat will take the data based on routine for the week. But yesterday onwards it is not picking up the data.however I have the data in datasource for the week.
Wht would be the problem. I debuged the code and its working fine.
Sekhar

Concatination of Two dates in customer exit Variable

HI Expert ,
I am writting customer Exit Variable to get Records from user entered Dates .
Eg. In Variable Screen of Bex report i have 2 Variable LYDate & TY Date both of them are As "Mutiple Single Value" & "Mendetory".
If we give LYDATE and TYDATE Date range as,
LYDate - 01/2013 - 06/2013
TYDate - 01/2014 - 12/2014
So I need ABAP Code which will get Value Range from 01/2013 from LYDATE and 12/2014 From TY DATE . So Query will Get data for 01/2013 TO 12/2014 (2 Years Data).
ZCALYEAR (Cusomer Exit) = LYDATE (01/2013) TO TY DATE(12/2104).
Please provide step by step ABAP Code to Achiev above issue. Points for Sure...
Thanks,
GB

Hi,
Some code like this will solve your issue:
CASE I_VNAM.
   WHEN 'NEWVARIABLE'.
   IF I_STEP = 2.
      READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE WITH KEY VNAM = 'LYDate'.
      If sy-subrc =0.
          CONCATENATE LOC_VAR_RANGE-LOW(4) INTO L_S_RANGE-LOW.
          READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE WITH KEY VNAM = 'TYDate'.
          If sy-subrc =0.
               CONCATENATE LOC_VAR_RANGE-HIGH(4) INTO L_S_RANGE-HIGH.
               L_S_RANGE-SIGN = 'I'.
               L_S_RANGE-OPT = 'EQ'.
          APPEND L_S_RANGE TO E_T_RANGE.
        endif.
      endif.
    endif.
endcase.
Regards
Yasemin...
Just realized that you need the year. Message was edited by: Yasemin ULUTURK

BW Master Data for Customer Exit Variable Reference

Good day Experts,
I have several queries that I would like to remove the hard coding of values on to prevent yearly maintenance. In these queries there are two conditions each condition is on different key figures that is amount by year. The query is only to report on data that for the two amounts (separated by year) is greater than the specified values. I want to change the condition so the value is no longer hard coded so the query will role automatically as the time period changes. The year amount values that the condition will need to reference are not currently stored in our BW system. I would like to create master data that is maintained directly in the BW system for the amounts that a variable for the condition in the query can then access.
I know it can be set up as master data and then referenced through a customer exit variable but when I set up the master data if I do the Amount as a key figure I cannot maintain the key figure value for the master data manually in BW, if I set the Amount up as a numeric characteristic then I canu2019t directly use a decimal. Am I missing something in the key figure setup then referencing the key figure as an attribute of the year value or do I need to do it as a characteristic and use a conversion routine or something for data manipulation?
Can someone please give me some guidance to what the best way to do this is?
The data necessary master data for storage in BW is the YEAR and a single dollar value:
For Example:
Year          Amount
2009           101.50
2008          207.80
2007          807.40

I figured out that I can use an amount in the master data and maintain the amount manually as long as I use the amount with a currency instead of setting the currency in the key figure.

Problem with customer exit variable that is input ready as well

Hello all,
I'm facing an issue with a customer exit variable that again has been defined as input ready. I'm not sure why it is working incorrectly and I#m wondering if this is a bug or if I do s.th. stupid.
The problem is that in the exit program ZXRSRU01 this varibale does not go into the program code I have prepared for this variable. I have added entry points for all three i_step values 1,2,3, but the code will never be touched and in debugging I can see that it simply pypasses the code for this variable.
I have tried to enter a value or to leave it blank, no difference.
When I run another test by just using a customer exit variable w/o input ready capability, then I have no issue, the exit does exactly what I have coded.
Does this mean, that a customer exit variable along with input readiness dows not work ?????
You may ask why I need this variable. Well, my intention is to use the input value of this variable A to derive other values for a complete different variable B. Afterwards I want to erase the input given into variable A to have it blank.
Any comments are appreciated
Thanks

Hi Heiko,
I assume A & B variables are defined on different Characteristics. If you wish to derive B based on A, you can create the Query Characteristic Restriction on B & have a dummy RKF restricted on A whose processing is by Manual Input; where processing of B is by Customer Exit. In istep 2 you can check for B, read A & derive B. There would not be a need to blank out A since the Query would not be restricted on A - you can hide the dummy RKF from showing in the output. Just a thought.
--Priya

Authorization (rsecadmin) with customer exit variable

Hello,
I need to maintain authorization on 0CALMONTH with a customer exit variable.
0CALMONTH is "authorization relevant"
I created a variable of type "customer exit" : ZVAR001 (this variable is OK, I checked its value in a query)
I created a new authorization object with 0CALMONTH = $ZVAR001.
When I run my query I have a message due to authorization error.
If I change my authorization object by replacing my variable ($ZVAR001) by a constant value I have no authorization problem.
I don't understand why...
Error logs don't help me to solve my problem : I have the following message "Message EYE007: You do not have sufficient authorization" and system just says I have "0CALMONTH I EQ $ZVAR001 " but doesn't precise values under variable ZVAR001
Thanks for your help

Indeed problem was in costumer exit because I used condition with "I_STEP". Since I have delete my condition I have no authorization problem with my variable....

Need logic to find Year to Date for customer exit variable

Hi to all,
I am creating customer exit variable for query .
query should display data according to current system year from jan till current system date.
here senario is like that user never enter year and query will automatically will fetch the data according to current year starting from jan to current system date.
example.
current year 2010 and today is system date is sep 29 2010, so query will display data from jan 2010 to current data sep 29 2010.
please can any one provide me logic for that.
any code .
regards
pavneet rana

Hi,
You need to create the characteristic customer exit variable of type select-options. Restrict your keyfigure based on this variable.
In the logic in CMOD,
write as below
i_step =2.
case i_vnam.
When 'exit variable'.
temp = sy-datum+0(4).
concatenate temp '0101' into temp1.
l_s_range-low= temp1.
l_s_range-sign = 'I'.
l_s_range-opt = 'BT'.
l_s_range-high= sy-datum.
append APPEND l_s_range TO e_t_range.
endcase.
For any further help on customer exit based variable, please refer below article.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20f119d9-922d-2c10-88af-8c016638bd90?quicklink=index&overridelayout=true
Edited by: Rahul K Rai on Sep 29, 2010 3:09 PM

Text Variable replace with Customer Exit Variable

Dear Experts,
I created a text variable based on replacementh path (instead of customer exit). The reference characteristic is same that as my customer exit Variable and replace it by Key.
I want to replace it with already Existing Customer Exit Variable but it is not displaying in the List Box even though existing variable option is mandatory.
Can any one Suggest me the answer for this.
Regards
Supraja.K

I do not think you can select Customer Exit variable, if you see the type is selected to Char Value Variables and it is not editable.
It would be suggested to go for Customer Exit procesing type for your text variable.
Cheers,
Neel.

Authorization with customer exit variable (CP, BT, EQ)

Hi SDN-Experts,
I have a question concerning the new authorization concept.
I created an authorization for 0COSTCENTER which also contains the 3 special characters 0TCAACTVT, 0TCAIPROV and 0TCAVALID. I inserted a customer exit variable for 0COSTCENTER. The exit reads datasets from a db table which contains authorizations for the actual user. The authorizations have different formats, e.g. "1000", "1000;1200", "25*" etc.
The internal table e_t_range is filled as followed in the exit:
i   eq   1000
i   bt   1000   1200
i   cp   25*
This does not work. It works if I only use "eq" OR "cp". But not both at the same time.
How can I achieve to use the different authorizations in the db table for the bi authorization?
Thanks in advance...
Joerg

Hi Olivier.
Yes, the variable is defined as selection option and I did also try to use "EQ" instead of "CP".
I tested again with another variable which is "ready for input" and is not used in an authorization. The Variable is filled in the customer exit. This is the code:
WHEN 'ZJGR_COSTCTR_TEST'.
l_s_range-sign = 'I'.
l_s_range-opt = 'BT'.
l_s_range-low = '0000001000'.
l_s_range-high = '0000001200'.
APPEND l_s_range TO e_t_range.
l_s_range-sign = 'I'.
l_s_range-opt = 'CP'.
l_s_range-low = '0000002*'.
APPEND l_s_range TO e_t_range.
The result in the variable screen in BEx Analyzer is the following:
1000 - 1200;0000002*;
And it still does not work. It seems that you could not mix EQ, BT and CP. But this is exactly what I have to do with the authorization variable...
Do you have any other tipps that I might try out?
Thanks,
Joerg

Problem with customer exit variable

HI i have created a customer exit variable to rread a table based in user input and pass it to my variable , every thing works fine but i get a waring message in my WAD saying
RANGE-LOW for customer exit variable ZVSO_PRM corrected to # BRAIN 746
Does any one have any idea why is it comming
my code is as follows
WHEN 'ZVSO_PRM'.
IF I_STEP = 2.
DATA: BEGIN OF ZPROD_MODEL OCCURS 0,
I_PROD LIKE ZCURR_PM_T-/BIC/ZPRODMOD,
END OF ZPROD_MODEL.
DATA: BEGIN OF ZREGIO_TABLE OCCURS 0,
REGION LIKE ZCURR_PM_T-/BIC/ZREGION,
END OF ZREGIO_TABLE.
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZREG02'.
CLEAR L_S_RANGE.
ZREGIO_TABLE = LOC_VAR_RANGE-LOW.
APPEND ZREGIO_TABLE.
ENDLOOP.
LOOP AT ZREGIO_TABLE.
SELECT /BIC/ZPRODMOD FROM ZCURR_PM_T INTO TABLE ZPROD_MODEL WHERE /BIC/ZREGION = ZREGIO_TABLE-REGION.
APPEND ZPROD_MODEL.
ENDLOOP.
SORT ZPROD_MODEL.
CLEAR L_S_RANGE.
LOOP AT ZPROD_MODEL.
L_S_RANGE-LOW = ZPROD_MODEL-I_PROD.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'EQ'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDLOOP.
ENDIF.

Could it be that the code doesn't find any value in ZCURR_PM_T table for the specified input region?

Error With Customer Exit Variable

Hi,
I need To Create Customer Exit For Text Variable based on Two Input Variable values.
can any one correct my code Code is written below based on quarter and Fiscalyearvarient.
I have to get calmonth Text value.
I am getting the error as : "I_T_VAR_RANGE" is a table without a header line and therefore has no
Component Called "0PERIV".
DATA : l_s_range TYPE rsr_s_rangesid,
        loc_var_range LIKE rrrangeexit.
IF i_step = 2.
CASE i_vnam.
   WHEN 'ZTXT_CML' .
      CLEAR: l_s_range.
      LOOP AT i_t_var_range INTO L_S_VNAM WHERE vnam = 'ZQUAR' AND vnam = '0periv'.
        IF i_t_Var_range-0PERIV = 'IE'.
          IF i_t_var_range-ZQUAR = '1'.
            l_s_range-low = 'APRIL'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ELSEIF i_t_var_range-ZQUAR = '2'.
            l_s_range-low = 'JULY'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ELSEIF i_t_var_range-ZQUAR = '3'.
            l_s_range-low = 'OCTOBER'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ELSEIF i_t_var_range-ZQUAR = '4'.
            l_s_range-low = 'JANUARY'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ENDIF.
        ELSEIF i_t_var_range-0PERIV = 'K4'.
          IF i_t_var_range-ZQUAR = '1'.
            l_s_range-low = 'JANUARY'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ELSEIF i_t_var_range-ZQUAR = '2'.
            l_s_range-low = 'APRIL'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ELSEIF i_t_var_range-ZQUAR = '3'.
            l_s_range-low = 'JULY'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ELSEIF i_t_var_range-ZQUAR = '4'.
            l_s_range-low = 'OCTOBER'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ENDIF.
        ENDIF.
          APPEND l_s_range TO e_t_range.
      ENDLOOP.
ENDCASE.
ENDIF.

Hi Supraja,
You would have to declare I_T_VAR_RANGE internal table as the table with an header line.
This you will find in data declaration segment.
ie
DATA : I_T_VAR_RANGE type <table name> WITH HEADER LINE.
or
Create a work area like l_s_var_range.
Use work area while performing operations in your code and later append the record to the table i_t_var_range.
DATA : L_S_VAR_RANGE type i_t_var_range.
Also, i_step = 3 is the right one, because you are processing the customer exit based on the values of the user input of two variables.
Modified code below.
DATA : l_s_range TYPE rsr_s_rangesid.
DATA : L_S_VAR_RANGE type i_t_var_range,
loc_var_range LIKE rrrangeexit.
IF i_step = 3.
CASE i_vnam.
WHEN 'ZTXT_CML' .
CLEAR: l_s_range.
LOOP AT i_t_var_range INTO l_s_var_range WHERE vnam = 'ZQUAR' AND vnam = '0periv'.
IF l svar_range -0PERIV = 'IE'.
IF l_s_var_range -ZQUAR = '1'.
l_s_range-low = 'APRIL'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIF l_s_var_range -ZQUAR = '2'.
l_s_range-low = 'JULY'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIF l_s_var_range -ZQUAR = '3'.
l_s_range-low = 'OCTOBER'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIFl_s_var_range -ZQUAR = '4'.
l_s_range-low = 'JANUARY'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ENDIF.
ELSEIFl_s_var_range -0PERIV = 'K4'.
IF i_t_var_range-ZQUAR = '1'.
l_s_range-low = 'JANUARY'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIF l_s_var_range -ZQUAR = '2'.
l_s_range-low = 'APRIL'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIF l_s_var_range -ZQUAR = '3'.
l_s_range-low = 'JULY'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIF l_s_var_range -ZQUAR = '4'.
l_s_range-low = 'OCTOBER'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ENDIF.
ENDIF.
APPEND l_s_range TO e_t_range.
ENDLOOP.
ENDCASE.
ENDIF.
Hope it helps,
Best regards,
Sunmit.

Help with Customer exit variable

Hi Guys,
     I need your urgent help. I have a requirement where I need to create a variable (on CALDAY) in a report which should use the input value given for another variable (created on CALMONTH). To put in words more clearly, CALMONTH is a variable that is mandatory for input but the CALDAY variable should not appear on the selection screen. I was told that I should write a customer exit to make this happen. So can someone please explain me the process of creating a customer exit and give me the code.
WHEN CALMONTH values are selected to be 07/2006 - 08/2006... CALDAY values should be 07/01/2006 to 08/31/2006.
CALMONTH is user entry, mandatory, range and multiple selection variable.
Early reply is highly appreciated and duely rewarded. Please let me know if I am not clear about the requirement. Thanks a bunch in advance.

Let us say, user enters multiple ranges for the month, you would want corresponding date ranges for the same, right?
data : w_date like sy-datum.
case I_VNAM.
when 'ZCALDAY'. " Calday var
loop at i_t_var_range into LOC_VAR_RANGE
     where iobjnm = 'ZCALMONTH'.
WA_RANGE-SIGN = 'I'.
wa_date+2(6) = loc_var_Range-low.
wa_date+0(2) = '01'.
wa_range-low = wa_date.
if loc_var_range-high eq space.
    WA_RANGE-OPT = 'EQ'.
else.
    wa_range-opt = 'BT'.
    wa_date+2(6) = loc_var_range-high.
    wa_date+0(2) = '01'.
    wa_date = wa_date + 31.
    wa_date+0(2) = '01'.
    wa_date = wa_date - 1.
    wa_range-high = wa_date.
   endif.
   append wa_range to e_t_range. clear wa_range.
endloop.
endcase.
This should do.

Query - Replacement Path for a Customer Exit Variable

Hi
New to the field and the board. Any and All help is greatly appreciated.
I have created a query which runs based on a date selection. The query have few customer exit variables whose values are set in ABAP. All Key Figures in the query are brought depending on the date ranges that each of the CE returns. Ex - one column is sales for first 10 days, 2nd for second 10 days, 3rd for first quarter, 4th for 2nd quarter and such. There are about 20 - 25 columns with KF in the query and all are Customer Exit date driven.
The challenge:- Each column heading should have the name of the month. I tried using Replacement Path. But it works when the selection is based on a constant value but not on value based on variable which is a customer exit. Ex - If I say restrict Cal/Month for July 2013, the replacement path for the Col Heading works fine. But if I say restrict Cal/Month for "ZVAR_SecondQtr_First_Month" the replacement path doesn't work.
Help Please
Thanks
Vidya

In the text variable that you are using , i guess you have a replacement path. In this instead of using your characteristic for specifying how the value has to replace, use the variable option and give the variable name there
http://help.sap.com/saphelp_nw70/helpdata/EN/43/565cd22fc95f6ce10000000a1553f6/content.htm
Hope it helps
Regards,
Rathy

Variable with customer exit

Hello,
I have created a query with customer exit variable.this variable calculates cumulative month from the beginning of the year. this variable depends on another regular variable 0PCALMON (single value, mandatory). i also use this variable in the query to show the month itself.
<b>the problem is as follow:</b>
until yesterday the 0PCALMON variable pop up normally, but now the variable doesn't pop up at all!
Does anyone have an idea?
Thanks,
Maya

Hi,
The variable may be personalized with some value.
<b>To remove the personalization for a user:</b>
Step 1: RSA1 -> Search for ODS 0PERS_VAR
Step 2: Manage -> Contents ->selective deletion
Step 3: Put the user to remove the personalization
http://help.sap.com/saphelp_nw04/helpdata/en/01/42c73c13b0ce5be10000000a114084/content.htm
Regards
Happy Tony

RSCRM: Query date with customer exit variable

Similar Messages

Maybe you are looking for