RSDMD 194 error

Hi,
When loading material attributes I am getting the following error
"Value '000000000000000010 ' for characteristic 0MATERIAL is in external
format" shall I have to do any material conversions
?? If so how ?

Hi,
Check the below thread.
Value '1019400000 ' for characteristic 0MAT_PLANT is in external format

Similar Messages

Error RSDMD 194 due to '#" after migration in BI 7

Hi Gurus,
we migrate our server BI in BI 7 and Unicode (from 3.5, non Unicode) and now on 0customer loading we have an error on a few lines RSDMD 194. it seems to be the character '#' is not accepted.
in RSKC we have the customizing ALL_CAPITAL. this load works in BW 3.5.
Do you have any idea for a global solution. because my last possibility is to create a routine to convert the '#' in '-' for example but i want ti understant why it works in 3.5 and not in BI7 with Unicode.
Thanks
CYril

since you have migrated from no-unicode system to unicode some characters may not be permitted. Check whether you have installed the required language packs to support the language you are using. Else you need to use FM or routine to remove the invalid characters.

Master data loading error: RSDMD 194

Hi Experts,
I working on BI7.0,
I have loaded 0Material data upto PSA from R/3 successfuly. When I try
to execute DTP from PSA to 0Material Master data it is giving following error,
but some records loaded successfully from PSA to Target.
0MATERIAL : Data record 1 ('310957 '): Version '310957 ' is not valid     RSDMD     194
Diagnosis
     Data record 1 & with the key '310957 &' is invalid in value '310957 &'
     of the attribute/characteristic 0MATERIAL &.
System Response
     The system has recognized that the value mentioned above is invalid, and
     has processed this general error message. A subsequent message may give
     you more information on the error. This message refers to the same
     value, even though it does not state this explicitly.
Procedure
     If this message appears during a data load, maintain the attribute in
     the PSA maintenance screens. If this message appears in the master data
     maintenance screens, leave the transaction and call it again. This
    allows you to maintain your master data.
Procedure for System Administration
Kindly advise.
Thanks in advance.
Maruthi.

Hi -
I faced the same issue.
Error : 'RSDMD 184'
It was delta load. Initial load went well, but delta failed. I ran the delta after some days after initial load.
The problem was with the source system data. Just check the source data once with R/3 people. Delete data from BW and replicate the data source and activate transfer structure and try loading again.
Tks,
Praveen Tati

Problem while loading master data - Help

Hi
I am using BI-7. I have Customer & Plant compounded in ZMat_Plant. I am trying to load zmat_Plant but getting following error.
I followed the solution as in link,but didnt worked: RSDMD 194: Error Loading 0Material 7.0 using 0SOURSYSTEM as compounding
Looking for your help... Thanks...
Diagnosis
    Data record 1 & with the key '00000000033000100000009 &' is invalid in value '00000000033000100000009 &' of the attribute/characteristic ZMAT_PLNT &.
System Response
    The system has recognized that the value mentioned above is invalid, and has processed this general error message. A subsequent message may give you more information on the error. This message refers to the same value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in the PSA maintenance screens. If this message appears in the master data maintenance screens, leave the transaction and call it again. This allows you to maintain your master data.

I used 'APLHA' conversion routine in infopackage, so the problem has been solved. Thanks...

Error 194 while loading Master Data.

Hi,
I've a custom Info Object which has 0MATERIAL as an attribute. While trying to load master data to this custom info object using DBConnect , I'm getting the error:
RSDMD 194
0MATERIAL: Data record 1('0001003') : Version '1009841' is not valid.
I think it's a problem with conversion exit. But I'm not able to solve this problem. It would be of great help if you could guide me on how to overcome this.
Thanks in advance.
Regards
Hari

Hari,
I'm thinking for DB Connected datasources we have Propose Tab Page and Fileds Tab Page. In the Propose tab Page you can see data type and Format(internal or External or check). select external, put data type of your Material Infoobject Data type in the Propose Tab Page.
all the best.
Note: I'm thinking DB Connected Datasources got Propose Tab page. Please correct me if i'm wrong.
Regards,
Nagesh Ganisetti.
*Assign Points if it helps

Payment block key TEXT loading error

Hi,
When trying to load master data to the info object 0PMNT_BLOCK, I'm getting the error:
<b>Value '# ' for characteristic 0PMNT_BLOCK contains invalid character RRSV     7
0PMNT_BLOCK : Data record 12 ('#E '): Version '# ' is not valid     RSDMD     194</b>
The Payment block key '#' is valid in R/3 for this characteristic
Please help.
Thanks

try to replace "#" in your transformations for master data with space (ABAP code). or edit the PSA for that record.
Message was edited by:
        Manga Paidikondala

Why iam getting this error in while scheduling?

Hi,
Experts,
I am doing plat file data into Bi system scnario i am getting data into PSA but while scheduling i am getting this error which i have mention below:
MATE_NAME : Data record 2 ('Maj '): Version 'Nokia88 ' is not valid RSDMD 194
MATE_ID : Data record 2 ('Maj '): Version 'Maj ' is not valid RSDMD 194
MATE_NAME and MATE_ID are info objects of charecter infocatalog.
pass with good solution.
Thank u,
Shabeer ahmed.

HI,
here are some of flatfile errors:
1.check whether in flat file ur using Uppercase or Lowercase letters.
u sholud use all uppercase letter, or if u want to use lowercase also then while defining info object for that char u should select the check box "lower case".
2. check your attribute length settings and type..may be the chanracter values are not as per the definition of ur infoobject
3. Check whether ur using any spaces or special characters that BI cannot display...if you check in RSA3 for the record in the source system do you also see the space or some other character?
hope this leps u,
Thanks
Sai Chand

Source System Error for 0Material_Attr

Hi Gurus,
I have New BI System, when i m loading 0Material_Attr, the whole data is coming but with the status Red. May b the error is with source system. I checked in PSA maintenance and the error detail in source system is mentioned below.
"Value 'A3000014500L ' for characteristic 0MATERIAL is in external format"
"0MATERIAL : Data record 1 ('A3000014500L '): Version 'A3000014500L ' is not valid RSDMD 194".
for detail error check the link below
https://docs.google.com/document/d/1v4uHeg6Ci29zv0qJ21dOH7gttuQyg_VZsLM2IMfZEuM/edit?hl=en&authkey=CLnd8P4H
can anybody help in this regard.
Thanks in advance.
Regards
Manna Das

Hello Manna Das,
0Material has conversion Exit MANT1 which converts the Material in the external format to internal format of the system.
Can you please check if the Converison exit is there?
Thanks,
Sarat

Error message uploading 0material text and attributes.

Dear all,
i have received an error message when uploading 0material text and attributes.
Error message is as follows:
RSDMD 194
Data record 512 & with the key '000000000000000081T &' is invalid in
value '000000000000000081 &' of the attribute/characteristic 0MATERIAL
The system has recognized that the value mentioned above is invalid, and
has processed this general error message. A subsequent message may give
you more information on the error. This message refers to the same
value, even though it does not state this explicitly.
any help?
thanks

Hi john mcquade,
Your error message says it all!
You have your 0material with wrong info to be loaded, check your PSA the records with error (should begin in record 512) and see what is inserted as 0material (probably you're missing some zeros before the number).
You could compare that record with another one (less than the record 512) to see an example of a material that has the right input and this one that exists here with errors.
Diogo.

Errors In PSA

Hi All
I am getting errors in PSA when Loading Master data
The errors are
1.ZACTPAR : Data record 77 ('000300000089 '):
Version 'Rebserve FM ' is not valid RSDMD 194
2.Value 'Rebserve FM ' for characteristic ZACTPAR
contains invalid characters RRSV 7
Can some body tell me what the prob is and how to solve it
Regards
Vasu

Hi Vasu
You can see this erroraneous value in PSA maintenance RSA1-> PSA and here select your requst and edit PSA.
Please check if the value 'Rebserve FM' is not valid value for your characteristic ZACTPAR. You can get change this value in PSA and then re-load. Prior to this discuss this with R/3 people and get confirmation of this value.
If this issue is with invalid characters (hash like wired characters) then refer to this thread
Re: Regarding Special Characters
Hope this helps
Regards
Pradip

0MATERIAL master data loading error - version not valid

Hi all,
When i am trying to load 0material master data , i get the following error :
0MATERIAL:Data record 1 ('000000000000100001 '): Version '000000000000100001 ' is not valid RSDMD 194
System diagnosis :
Data record 1 & with key '000000000000100001 &' is invalid in value '000000000000100001 &' of the attribute or characteristic 0material &.
System response
The system has recognized that the value mentioned above is invalid, and has processed this general error message. A subsequent message may give you more information on the error. This message refers to the same value, even though it does not state this explicitly.
Procedure
If this message appears during a data load, maintain the attribute in the PSA maintenance screens. If this message appears in the master data maintenance screens, leave the transaction and call it again. This allows you to maintain your master data.
Please help me solve this problem. Will assign points.
Thanks & Regards,

Hi Stefen,
Thanks a lot for your input.. It has solved my problem as well.
10 points from me
Thanks a lot.
Regards
Dolly

Error loading from flat file

Hello Everyone,
I loaded an InfoObject from a flat file. This infoobject has 3 attributes. The order of the fields in the file is in sync with Communication structure. I am getting the following errors for data of one attribute.
'Lowercase' indicator is checked for the ZDES attribute.
Value 'IndCp' for characteristic ZDES contains invalid characters: RRSV 7
ZDES: Data Record 1 (A123): Version 'IndCp' is not valid: RSDMD 194
'A123' is the value of the first records of the parent infoobject.
We are on BW 3.0B. SP 18.
Thanks.

Hi Sachin :
SAP Note :681084
Initial value '#' for attribute not saved
Symptom
Transaction RSDMD, select infoObject. In the maintenance screen,
select multiple records and click on change. Set the value of an attribute to initial ie '#'. The '#' value is taken as the value of the attribute. If we try to save the data with '#', the RSDMD 194 and RRSV 007 messages are thrown. For eg. "Value '#' for characteristic ZUS_ATTR1 contains invalid characters". The correction instructions number for
this fix is 307536.
The same symptom is found when the LIST->CHANGE ALL RECORDS option is
selected. The error messages RSDMD 194 and RRSV 007 are thrown when we
try to save the data with the '#' value. The correction instruction
number for this fix is 610014.
The same problem is noticed when a new entry is created using the
RSD1 transaction with an '#' value. The correction instruction number
for this fix is 335642.
Check this Note.,
Hope this helps,
Sudh

Error loading master data attr and text for 0material

Hi gurus,
I am new to BI, I am getting an error RSDMD- 194 when i am loading 0MATERIAL_ATTR and TEXT.
It is showing for nearly 100 records in the error stack.
Can anyone explain some basics,
1) why do we need to add 0MATERIAL to a particular Info area to start loading its ATTR and TEXT
2) Are the info objects that appear in the attributes tab of 0MATERIAL the same as the fields of 0MATERIAL_ATTR datasource, basically what i don't understand is are we mapping the 0MATERIAL_ATTR datsource fields to the info objects appearing in the attributes tab of 0MATERIAL info object.
3) Also when i added 0MATERIAL to my Info Area , there were some extra info objects that got in, are there any dependent objects that get added ?
<removed by moderator>
Edited by: Siegfried Szameitat on May 19, 2009 11:53 AM

Hi,
"Error RSDMD- 194 when i am loading 0MATERIAL_ATTR and TEXT.RSDMD- 194"
Please check if there is any external characterstic in those 100 records, correct it and load again.
1) why do we need to add 0MATERIAL to a particular Info area to start loading its ATTR and TEXT
It does,t matter where the 0Material is. Info area in kind of Folder to easily locate and put the all the related objects at one place.
2) Are the info objects that appear in the attributes tab of 0MATERIAL the same as the fields of 0MATERIAL_ATTR datasource, basically what i don't understand is are we mapping the 0MATERIAL_ATTR datsource fields to the info objects appearing in the attributes tab of 0MATERIAL info object.
If it is a business content infosource, it will automatically map the attribute to data source field. If you are modifying or creating your own object, you should map it manually based on field name and description.
3) Also when i added 0MATERIAL to my Info Area , there were some extra info objects that got in, are there any dependent objects that get added ?
If you will move any objects all the compounded objects will also come to the info area.
Regards,
Kams

Error in starting dbconsole

Hi,
Actually I have gone through many posts based on this thread. but no one really have a proper solution for it ...I have a situation like this,
I have a 2 node cluster on 10RAC. I was able to access respective oem url's from both the nodes before. But now somehow I am not able to access the OEM url from the first node. I can still access the OEM url from other node. When I tried to troubleshoot, I noticed that it is dbconsole problem. I am getting error while starting the dbconsole as follows,
oracle10g>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.1.0.4
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://rac01:5500/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ............................................................................................. failed.
Logs are generated in directory oracle/app/product/10.1.0/rac01_abc1/sysman/log
you have mail in /var/mail//oracle
When I looked into emdctl.trc, i can see following error message is repeating.
2006-09-06 16:43:05 Thread-1 WARN http: snmehl_connect: connect failed to (racnyc01:5500): Connection refused (error = 146)
2006-09-06 16:45:36 Thread-1 WARN http: snmehl_connect: connect failed to (racnyc01:5500): Connection refused (error = 146)
2006-09-06 16:48:08 Thread-1 WARN http: snmehl_connect: connect failed to (racnyc01:5500): Connection refused (error = 146)
in emagent.trc i am getting following errors.
2006-09-06 16:50:34 Thread-192 WARN http: snmehl_connect: connect failed to (racnyc01:5500): Connection refused (erro
r = 146)
2006-09-06 16:50:34 Thread-192 ERROR pingManager: nmepm_pingReposURL: Cannot connect to http://racnyc01:5500/em/upload
/: retStatus=-32
2006-09-06 16:50:34 Thread-192 WARN http: snmehl_connect: connect failed to (racnyc01:5500): Connection refused (erro
r = 146)
2006-09-06 16:50:34 Thread-192 ERROR pingManager: nmepm_pingReposURL: Cannot connect to http://racnyc01:5500/em/upload
/: retStatus=-32
2006-09-06 16:50:37 Thread-194 ERROR upload: Error in uploadXMLFiles. Trying again in 300.00 seconds.
2006-09-06 16:50:50 Thread-196 ERROR upload: Error in uploadXMLFiles. Trying again in 300.00 seconds.
2006-09-06 16:51:04 Thread-197 WARN http: snmehl_connect: connect failed to (racnyc01:5500): Connection refused (erro
r = 146)
2006-09-06 16:51:04 Thread-197 ERROR pingManager: nmepm_pingReposURL: Cannot connect to http://racnyc01:5500/em/upload
/: retStatus=-32
2006-09-06 16:51:04 Thread-197 WARN http: snmehl_connect: connect failed to (racnyc01:5500): Connection refused (erro
r = 146)
2006-09-06 16:51:04 Thread-197 ERROR pingManager: nmepm_pingReposURL: Cannot connect to http://racnyc01:5500/em/upload
/: retStatus=-32
emagent.log says
2006-09-06 16:22:27 Thread-1 Starting Agent 10.1.0.4.0 from /orasw/app/oracle/product/10.1.0 (00701)
2006-09-06 16:22:32 Thread-1 EMAgent started successfully (00702)
emdb.nohup shows following error message
----- Wed Sep 6 16:53:10 2006::DBConsole exited at Wed Sep 6 16:53:10 2006 with return value 7. -----
----- Wed Sep 6 16:53:10 2006::Restarting DBConsole. -----
----- Wed Sep 6 16:53:10 2006::Console Launched with PID 18803 at time Wed Sep 6 16:53:10 2006 -----
06/09/06 16:53:24 Error starting ORMI-Server. Unable to bind socket: Address already in use
~
If anyone has solved this type of problem, then please guide me in this.
Thanks in advance !!!

Replies Here:
Re: Error in starting dbconsole

Skillbuilder modal page 2.0 causes a javascript error in APEX 4.2

After installing the Skillbuilder's modal page 2.0 plugin in APEX 4.2, the following javascript error is shown.
Line: 194
Error: Object doesn't support this property or method
Using IE8 debugger the following code seems to be at fault.
function(){apex.jQuery(document).apex_modal_page({
   "transition":"fade",
   "draggable":true,
   "initialHeight":100,
   "initialWidth":300,
   "overlayOpacity":.5,
   "scrolling":true,
   "loadingImageSrc":""
(function(){apex.da.initDaEventList();})();
(function(){apex.da.init();})();
The modal page work flawlessly in APEX 4.1.
Any help will be greatly appreciated.
Thank you,
Del

Check your popup page. You probably have an after-processing branch defined which will redirect to your original page. That is not necessarily bad, although i usually set it to redirect to the same page when using a popup. What will probably not work for you is the success message selector. If you defined "#success-message" as the auto-close selector, this means that the plugin will look for an element on the page in the popup for an element which matches this selector.
- What did you define for auto-close selector
- And on the page you redirect to after-processing of the form, how is the success message defined there
If (IF) you have set #success-message as the auto-close selector, and the popup is not closing, then this would mean that the popup message on the page does not match this selector!

RSDMD 194 error

Similar Messages

Maybe you are looking for