RSEC_MIGRATION (Analysis Authrization Migration) AUFEX Error

Hi,
When I try to migrate using RSEC_MIGRATION, the following error appears.
AUFEX is not a name for an InfoObject of an InfoSet (not found)
I have tried selecting few users ans still no sucess.
Best Regards,
UR

Dear UR,
Iu2019m going to try helping you,
In my experience in the migration authorization process, I have haven some problem with the program RSEC_MIGRATION. One of them, was you have to select all user; some of reporting authorization object are links through deferent role; ect.
I suggestion look at the following thread:
Error execute report RSEC_MIGRATION
Owe college Andreas suggest one link and set of OSS note.
In my opinion, in the last project we go forward with process migration by manually way.
The strategic was:
u2022     Group the roles by family, create one layout role by each family and the rest make it derivate role.
u2022     Have done BIAUTH as Organizational Level.
u2022     Created analysis authorization by each reporting authorization role.
u2022     Be careful with characteristic and attribute navigational relevant authorization, both are manager like object. (Unlike in 3.X, where the navigational attribute take the setting of characteristic)
u2022     Join each analysis authorization with each role.
u2022     Regenerate all
u2022     Go forward with the test.
I hope these suggestions can help you in your question,
Luis

Similar Messages

Analysis Authorization Migration Question

Analysis Authorization Migration Question
This is detail Question
1) I am testing Analysis Authorization Migration in NW2004s SP9 and have applied all OSS notes that are relevant to SP09 and are coming in SP10.
2) We have 2 Info object flagged as Authorization relevant 0COMP_CODE and 0COSTCENTER
3) We have Object level security set-up in BW 3.x system and for a role we have specified values like 0COMP_CODE has value 1000, 1800. :. In the same role we have specified 0COSTCENTER value 130001 to 180001, : and hierarchy node.
4) When we migrate to Analysis Authorizations, using RSEC_MIGRATION, this program creates 2 Authorizations ZCOCODE00 & ZCOSTCTRH00. Both of them have 0COMP_CODE and 0COST_CENTER Objects.
5) ZCOCODE00 authorization gets value 0COMP_CODE values 1000, 1800. : and 0COSTCENTER Value :.
6) On the same line ZCOSTCTRH00 gets value 130001 to 180001, : and 0COMP_CODE :.
1st Question:
1) Why does it create 2 Authorizations?
2) During Checking it does not pass the authorizations, because it seems to me that it fails in Optimization process.
3) I manually merge the authorizations in ONE object then authorization check passes. In other word if I combine ZCOSTCTRH00 & ZCOCODE00 then Query authorization check passes.
Any one is struggling on this.
Please note, I am doing Migration so that it updates existing Profiles (Roles now from SP9).
Any comments will be very help full.
Pankaj Gupta

Hello Pankaj
There are some basic misunderstandings on your side.
Let me try to clarify:
First we should distinguish between migration of authorizations and of what a query does with them.
You had 2 auth objects before migration (in 3.x).
Of course, they must be migrated to 2 new analysis auths.
There is no general possibility to combine authorizations to a single one as the may appear in different roles and users. Moreover this would kill performance and finally, nobody would recognize the origin.
Only in very restricted cases one could think of a combination of auths which come out of migration. But, then people loose overview about what goes on.
Before the corrections in note "Migration IV" the : had not been inserted but now it is for good reasons.
Now, accept for the moment that you receive 2 auths.
Then, you cannnot (must not) combine the 2 resulting authorizations!
Authorization 1
COMP_CODE : 1000, 1300, :
Cost Center : :
Authorizations 2
Comp_Code :
Cost Center : 3100001-31999999; : plus a Hierarchy Node.
This means that e.g. combination
COMP_CODE 1000
COST_CENTER 3100001-31999999
is not allowed!!! Therefore, they must not be combined!
Also, the query and its optimization is comepletely independent of the migration. And here, during query run time the auths cannot be combined. It is no failure!
Moreover, the merging optimization is just a performance optimizaiton and has nothing to do with whether the query result is authorized or not.
If you combine them manually you have authorized different combinations.
Well, now you may wonder why you get 2 auths at all which leads to a "no auth" result in the query execution.
The reason is, that in 3.x where you got a result with your 2 auth objects the modeling was wrong.
If you want to authorize any combination of characteristic values, you should combine these characteritics together in one auth object, not in 2!
(In BI7.0 it works like that but not in 3.x)
But you defined 2 which may be valid even in several other InfoProviders independently and not even at the same time. Moreover, the auth objects may come from different roles and may be assigend to different users which then have completely different auth content. In general it is not possible to combine different auth objects or to find out those special situations which nevertheless allow for such optimizations. If you re-do a migration with more objects and users you could even receive different results which is also not satisfying.
Therefore, instead, the mechanism was introduced to insert a : auth to those characteristics that are auth relevant (and checked now with 7.0) but not in the currently processed auth object.
In you special case it may have made sense to combine them but not in general. And a migration can only try to work as general as possible.
For your application you may combine the 2 auths manually if you want to allow also the crossover combinations
COMP_CODE 1000
COST_CENTER 3100001-31999999
Best regards
Peter John
BI Development

How do I view Migrate Data errors - Access 2003 - Oracle 10g

I'm trying to use the SQL Developer to migrate data from an Access 2003 database to an Oracle 10g database. I followed the instructions found here:
http://www.oracle.com/technology/tech/migration/workbench/files/omwb_getstarted.html
I was able to complete every step except the actual data move. I exported the xml for the Access database, I captured the export and then ran the generation scripts on my target Oracle database (I'm using the same schema for the migration repository and the actual data). It created the tables with only one or two errors which I resolved.
Now, when I select Migration->Migrate Data, I get the dialog that appears to start 4 or 5 threads and attempts to migrate each table. They all error and do not transfer any rows. I can see that there's one error per table, but I can't see the error text. I just know that an error occurred. Is there a log somewhere or is the error displayed somewhere else? How do I know what's gone wrong?
Thanks.

I too receive unexplained error counts using the Migrate Data menu selection and unexplained failures using the Generate Data Move Scripts menu selection. Permissions granted by role or direct grants should not be a problem, but a Migrate Data error appears in the Migration Log panel at the bottom of the SQL Developer window, "Failed to disable constraints: ORA-00942 ... ". No further details available on what constraints or why the error. No other errors were detected while following the instructions found in the Oracle SQL Developer Migration Workbench Getting Started guide. SQL Developer never migrates the data from the existing Access 2000 mdb file to the newly created schema objects in Oracle 10g using either method. The following roles and privileges have been granted to both the repository owner and the target schema owner:
GRANT RESOURCE TO MIGRATE_USER WITH ADMIN OPTION;
GRANT CONNECT TO MIGRATE_USER WITH ADMIN OPTION;
ALTER USER MIGRATE_USER DEFAULT ROLE ALL;
-- 25 System Privileges for MIGRATE_USER
GRANT CREATE ROLE TO MIGRATE_USER;
GRANT ALTER TABLESPACE TO MIGRATE_USER;
GRANT ALTER ANY SEQUENCE TO MIGRATE_USER;
GRANT INSERT ANY TABLE TO MIGRATE_USER;
GRANT SELECT ANY TABLE TO MIGRATE_USER;
GRANT CREATE ANY TABLE TO MIGRATE_USER;
GRANT UNLIMITED TABLESPACE TO MIGRATE_USER WITH ADMIN OPTION;
GRANT DROP TABLESPACE TO MIGRATE_USER;
GRANT CREATE ANY TRIGGER TO MIGRATE_USER;
GRANT ALTER ANY ROLE TO MIGRATE_USER;
GRANT CREATE VIEW TO MIGRATE_USER WITH ADMIN OPTION;
GRANT DROP USER TO MIGRATE_USER;
GRANT CREATE TABLESPACE TO MIGRATE_USER;
GRANT GRANT ANY ROLE TO MIGRATE_USER;
GRANT CREATE ANY SEQUENCE TO MIGRATE_USER;
GRANT ALTER ANY TABLE TO MIGRATE_USER;
GRANT DROP ANY TRIGGER TO MIGRATE_USER;
GRANT DROP ANY ROLE TO MIGRATE_USER;
GRANT DROP ANY SEQUENCE TO MIGRATE_USER;
GRANT UPDATE ANY TABLE TO MIGRATE_USER;
GRANT ALTER ANY TRIGGER TO MIGRATE_USER;
GRANT COMMENT ANY TABLE TO MIGRATE_USER;
GRANT DROP ANY TABLE TO MIGRATE_USER;
GRANT CREATE PUBLIC SYNONYM TO MIGRATE_USER WITH ADMIN OPTION;
GRANT CREATE USER TO MIGRATE_USER WITH ADMIN OPTION;
-- 1 Tablespace Quota for MIGRATE_USER
ALTER USER MIGRATE_USER QUOTA UNLIMITED ON USERS;
Operating system for both Access 2000 and Oracle 10g is Windows XP PRO SP2.
Oracle SQL Developer is version 1.1.2.25 build MAIN-25.79 on Windows XP PRO SP2. All three are on the same PC.
Since only the last step failed, I created a User DSN with the ODBC administrator. Then, linked the newly created Oracle table to Access via ODBC using the DSN created. Next, I created an append query with the source being the Access table and the target being the Oracle table. I moved the data by pressing the red exclamation mark.

Email Migration Tool Error

Hi,
I get an error by using the Email Migration Tool Error with OCS Release 2 on a Linux RH AS 2.0 single box server:
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/mail/migration/migrate/Migrate
Command:
$ORACLE_HOME\bin\migrate.sh
Please help.
Bob de Leeuw

I had an 9.2 database already installed on my laptop. I installed the migration tool in c:\oracle\ora92\oes\migration and set ORACLE_HOME=c:\oracle\ora92.

Project Server 2013 migration workspace error

Project Server 2013 migration workspace error
Hello all,
I have just completed my Project Server 2010 to 2013 migration. All look OK until I tried using Project Professional 2013 and opening a project with about 25
Users (Enterprise Resource) . Opening took about 7 min. I tried creating a new project with 5 users and still took longer then is should.
I decided to run the below command and I received a lot of errors about missing workspace. Please help if anyone can.
Thank you in advance !!!
Test-SPProjectWebInstance -Identity http://XXXXXXXX.XXXXXX | Format-Table -Wrap -AutoSize | Out-File -FilePath c:\
Rule
TimeStamp Message
Microsoft.Office.Project.Server.HealthRules.ProjectBICenterExistenceHealthRule 4/16/2014 12:05:57 AM
The following ProjectBICenters
have missing lists:
(/projectserver/ProjectBICenter,
Reports).
Microsoft.Office.Project.Server.HealthRules.ProjectWorkspacesExistenceHealthRule 4/16/2014 12:05:58 AM The following projects are
missing the workspace webs: 'cf8f
0345-c4b5-e311-a4d0-0019b93bec52'
, '52babaa6-c4b5-e311-a4d0-0019b9
3bec52', '37ff2ac5-37bc-e311-b0a9
-0019b93bec52', '17fe20c2-38bc-e3
11-b0a9-0019b93bec52', 'b7faad6a-
39bc-e311-b0a9-0019b93bec52', 'c9
a70e95-a3b3-e311-b36f-0019b93bec5
2', 'fdf3c3f9-86ba-e311-b3d2-0019
b93bec52', 'ee95175e-f4bc-43f6-a9
c9-02837b5791bc', '5e2cbc54-4114-
4f24-af05-03e024c85046', 'bfd9e49
5-2a42-405c-9035-04e51f4afb2b', '
e381d24d-e82d-452b-b1ae-04f74e215
fd8', 'b85dc99a-0989-4fe1-af0a-05
c6b9448991', 'f2e1c579-2493-4ffd-
99a0-072b7f5f527f'

All,
Bulk update and post up gradation tasks was completed at time of migration.
I did notice that when opening Project Professional 2013 and unselecting
Load Resource Assignments, everything opens and runs as it should. Not sure why ? So I think for now, I'll run Project Professional 2013 without Load Resource Assignments until I find a fix.
As for (The following projects are missing the workspace webs) error, still getting them.
Thanks all for the Quick Reply's.
JBAE

SAP DEV migration process error

Hi all,
SAP DEV migration process error.Error Details:
Source system
SAP ECC6.0 SR2
DB: DB2.9.1.4
OS: AIX 5.3
Target system
SAP ECC6.0 SR2
DB: DB2.9.1.4
OS: SUSE 10 64 Bit
ERROR 2008-11-13 07:41:06
 CJSlibModule::writeError_impl()
CJS-30023 Process call '/usr/sap/DEV/SYS/exe/run/dipgntab -rwr40 -srctt DDNTT -srctf DDNTF -dsttt DDNTT -dsttf DDNTF -ttonly TT' exits with error code 126. For details see log file(s) dipgntab.log.
TRACE [iaxxejsbas.hpp:460]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2008-11-13 07:41:06 [iaxxgenimp.cpp:731]
 showDialog()
FCO-00011 The step adjustNametab with step key |NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_DB6|ind|ind|ind|ind|5|0|adjustNametab was executed with status ERROR .
TRACE [iaxxgenimp.cpp:719]
 showDialog()
<html><head></head><body>An error occurred while processing service SAP ERP 2005 Support Release 2 > Additional Software Life-Cycle Tasks > System Copy > IBM DB2 for Linux, UNIX, and Windows > Target System > Central System > Based on AS ABAP and AS Java > Central System Installation. You may now<ul> <li>press Retry to repeat the current step.</li> <li>press the View Log button to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul>Log files are written to /tmp/sapinst_instdir/ERP/LM/COPY/DB6/SYSTEM/CENTRAL/AS/.</body></html>
TRACE [iaxxgenimp.cpp:1155]
 showDialog()
waiting for an answer from gui
dipgntab.log
/usr/sap/DEV/SYS/exe/run/dipgntab: /usr/sap/DEV/SYS/exe/run/dipgntab: cannot execute binary file

Hi,
1. please check if /usr/sap/DEV/SYS/exe/run/dipgntab exists or not ?
2. Does it have executable permissions?
3. Does your user have authorization to execute it?
4. if you executed dipgntab manually, does it work ?
Regards,
Vincent

OBIEE answers Analysis new view socket error

Hi all
We are currently using OBIEE 11.1.1.7.131017. We are using Essbase as a source to develop reports and receive the following error when we create a pivot View (or any other view) using an existing Analysis result set in Analytics.
Odbc driver returned an error SQLFetchScroll. State: HY000. Code: 10058. [NQODBC][SQL_STATE: HY000][nQSError: 10058] A general error has occurred. [nQSError: 12002] Socket communication error at call=recv: (Number=10054) An existing connection was forcibly closed by the remote host. (HY000)
The results section only contains a few records and returns the results within a few seconds. It is when a new view is created from the Analysis' result that the error occurs.
Does anyone have any ideas on how to resolve this?
Thank you.
Johan
South Africa

Hi,
Lets try like this,
Open your rpd in online mode and double click on ur connection pool and enter the data base user name and password.
and check the consistency and save the online changes.
Now go to ur answers tab and create a report and view the data..
May be its resolves ur issue.
Please mark if its helps you...
Thanks......

Migration Assistant - Error Connecting to Network of sending MAC to new Mac

Migration Assistant - Error Connecting to Network of sending MAC to new Mac
So I doing the network Migration Assistant and its keeps giving me a ERROR connecting to Network of sending MAC to new MacBook Air... help...

The local path needs to be written as the "volumes". It's the Windows equivalent of using a Network Drive letter. If you have not set up the volume in the Mac Finder you will run into issues. DW was originally intended to have all files locally on your computer with a different testing server and different web server. The fact that you have the "d$" name suggests to me that these are Windows servers that are you connecting to. This article should help you map a drive that reconnects ( http://osxdaily.com/2012/05/04/automatically-connect-to-network-drive-mac-os-x/ ).
As far as the remote, for this DW should be allowing a network address because it is never assumed that the testing server is local on the computer. This may end up being a bug, but let's see if we can correct one problem at a time.

Migration Assistant Error Some files from ".journal" could not be transferred?

Hello, world.
A few days ago I replaced my the 97% full 100GB hard drive in my Dad's Core Duo 2.0GHz Macbook Pro with a 500GB but I received an ominous error at the end of the Migration Assistant transfer. Here are the steps I took:
1. Replaced physical drive.
2. Booted up from OS X Snow Leopard disc.
3. Formatted new drive as OS X Journaled using Disk Utility.
4. Installed OS X Snow Leopard on the new drive.
5. When prompted by OS X Installation, I selected transfer data from another volume.
6. Placed the old drive in an enclosure and connected via USB.
7. At this point I let Migration Assistant take over.
It took an hour and a half or more to transfer the data and everything SEEMS fine. However, at the end I received the following error message from Migration Assistant:
Errors and Warnings:
- 2013-11-02 16:15:49 -0400 Some files from ".journal" could not be transferred
- 2013-11-02 16:15:49 -0400 Some files from ".journal_info_block" could not be transferred
I have searched around but I've been unable to find any information on this. In other instances of these warnings, people seemed to be pointing the finger at moving from PowerPC macs to Intel Macs but this was Intel-->Intel.
I did find someone suggest one other thing in another thread:
"My reading of those error messages indicates that there's something wrong with the journaling files on the PB. I suggest that you disable and reenable it on the PB"
However, I do not know how to enable or disable journaling without reformatting the drive from scratch as journaled or non-journaled.
(post found here: https://discussions.apple.com/message/8675337#8675337)
Question: Should I be worried and does anyone know specifically what this error indicates? Is it possible that my dad's old hard drive was NOT formatted for journaling and MA was looking for these journal related files and unable to find them?
Thank you all in advance for your help,
Nick

What options did you select for Migration Assistant to transfer? For instance, did you select network & computer settings?
"Opt" sounds like the name of a folder, not a file type. On your 13" MacBook, do you have any folder by that name, especially in your home folder?
Also, have you run Disk Utility's *verify disk* check on the MacBook's drive?

TDMS - System Analysis Phase completed with errors

Hi All,
We are running TDMS copy, currently running at System Analysis phase, however we encountered status message "completed with error" within sub-step "Generation of Run-Time Objects for Data Transfer". When we checked the tasks, we found below error messages...
Error while generating runtime objects for ZJ_3RFREP_VALFMT_01W
Syntax error in function module /1CADMC/OLC_950000000614930
Error message: Type "DECFLOAT16" is unknown
We tried re-executing the step several times but no success.
Can anybody suggest how to fix the issue. Thanks.
Regards,
Philip

Hi experts,
We opened an OSS incident regarding this issue, and SAP responded to exclude the migration object J_3RFREP_VALFMT from the current transfer using the troubleshooter.
However, while we execute the troubleshooter, message prompt "Activity 'Troubleshooting for Migration Objects' execution 0003 in package 9002D, phase 'System Analysis' has been aborted ." appears.
In the Phase Overview of the System Analysis, step "Troubleshooting for Migration Objects" is added, which has an aborted status. Checking the logs of that steps we found below.
Skip Migration Objects from Current Transfer
I EQ J_3RFREP_VALFMT
Destination to the central system is not created yet
We checked all the RFC connections and all seems working fine.
Can anyone share how to fix this or what to check further.
Regards,
Philip

Web Analysis Report Migration from 9.3.1. to 11.1.1.3

Hi All,
We are migrating from 9.3.1 to 11.1.1.3 we have couple of web analysis reports running on the old server 9.3.1 and now i have to migrate those reports on the new server 11.1.1.3. Reports in 9.3.1 are in windows servers and it should me migrated to 11.1.1.3 which is on a solaris server. please let me me know if you have any ideas regarding this issue.
Thanks,
Ram.
Edited by: KRK on Sep 29, 2009 8:56 AM
Edited by: KRK on Nov 6, 2009 12:53 PM

Hi Vijay,
I have checked migration utility inversion 9.x basically this migration utility is compatible for reports from version 7.x to 9.x and it is not supported for reports from 9.x to 11.x ....
So i have finally fallowed a procedure.
I have exported the reports from 9.x and imported in 11.x .
Then after exporting i have pointed database connections to new 11.x version server.
Now I was facing a issue when i open a reports in read only mode (i.e as a business user) iam getting a screen where it asks for database details ( I have assigned business user read access to essbase)
Basically this reports are pointing to my old essbase server i.e version 9.x server.
Please let me if iam missing something while exporting and importing reports.
Thanks,
Ram.

Web Analysis 9.3.1: Error occured while opening document. Document ID = {0}

Hi Experts,
I am having an issue while opening a web analysis dashboard report. When I try opening it, web analysis runs for about 15 mins & then throws following error:
Error occured while opening document. Document ID = {0}
The report opens with its header having company log & two buttons, but data grid remains empty.
The source of Grid is Essbase. The tunning parameters in Essbase.cfg file are in place.
Could anyone please through more observation on this issue. Let me know if any further information is needed!.
Kindly suggest me any way to resolve it.
Thanks,
Krishan

The isapi (if you use one) timeout setting might be smaller than the time essbase needs to retrieve te information.
but most probably the analysis applicationserver jre heapsize is either to small or needs to much time to allocate it. Be sure to increase heapsize and set max equal to min (try 800mb, if your hardware has that resource)

OS-DB Migration [ Import Error ]

Hello,
We are doing the OS-DB Migration and on the last stage of the import...
We had 38 processes,out of which 37 are completed successfully... SAPAPPL0 is giving error...
Kindly please suggest...
trying to restart import ###
(RIM) WARNING: unable to drop table "/BDL/LOCK"
DbSlExecute: rc = 107
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
restart finished ###
#START: 20080616221834
TAB: [HEADER]
FIL: /sapexport/DATA/SAPAPPL0.001 #20080616221834
EOT: [HEADER]
(GSI) INFO: dbname   = "P4520080614110639                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "SAPTR10                                                         "
(GSI) INFO: sysname = "SunOS"
(GSI) INFO: nodename = "SAPTR10"
(GSI) INFO: release = "5.9"
(GSI) INFO: version = "Generic_122300-15"
(GSI) INFO: machine = "sun4u"
(CS) ERROR: cannot build CREATE statement for "/BDL/LOCK"
        not enough parameters for all items of the template
#STOP: 20080616221834
Thanks,
RaHuL...

Hello,
Thanks for the Reply...
CREATE TABLE template from the DDLINF.TPL [ as we are migrating from Informix] file
cretab: CREATE TABLE &tab_name
        ( /{ &fld_name &fld_desc /-, /} )
        IN &location
        EXTENT SIZE   &init
        NEXT SIZE     &next
        LOCK MODE ROW ;
        REVOKE ALL ON &tab_name FROM PUBLIC ;
        GRANT SELECT ON &tab_name TO PUBLIC
Corresponding table definition for /BDL/LOCK out of the SAPAPPL0.STR file
tab: /BDL/LOCK
att: APPL0 0 PA T all    /BDL/LOCK~0                    APPL0 0
fld: CATEGORY                       CHAR    12     0   0 not_null 1
fld: TASKNAME                       CHAR    40     0   0 not_null 2
fld: ID                                     CHAR    10     0   0 not_null 3
Latest Error is :
restart finished ###
#START: 20080617122529
TAB: [HEADER]
FIL: /sapexport/DATA/SAPAPPL0.001 #20080617122529
EOT: [HEADER]
(GSI) INFO: dbname   = "P4520080614110639                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "SAPTR10                                                         "
(GSI) INFO: sysname = "SunOS"
(GSI) INFO: nodename = "SAPTR10"
(GSI) INFO: release = "5.9"
(GSI) INFO: version = "Generic_122300-15"
(GSI) INFO: machine = "sun4u"
(IMP) TABLE: "/SAPDMC/LSCRULET"
TAB: /SAPDMC/LSCRULET
FIL: /sapexport/DATA/SAPAPPL0.001 #20080617122529
EOT: /SAPDMC/LSCRULET
(IMP) DATA: 34 rows in table "/SAPDMC/LSCRULET" #20080617122529
#Trying to create primary key "/SAPDMC/LSCRULET~0"
(IMP) PRKEY: "/SAPDMC/LSCRULET~0"
(IMP) ERROR: CREATE statement failed for object "/SAPDMC/LSCSTEPS"
        (CREATE TABLE "/SAPDMC/LSCSTEPS" ( "STEPNR" VARCHAR2(3) DEFAULT '000' NOT NULL ,
"STEPTYPE" VARCHAR2(3) DEFAULT ' ' NOT NULL , "FUNCNAME" VARCHAR2(30) DEFAULT ' ' NOT NULL ,
"X_MAINSTEP" VARCHAR2(1) DEFAULT ' ' NOT NULL , "X_VISIBLE" VARCHAR2(1) DEFAULT ' ' NOT NULL ,
"X_INACTIVE" VARCHAR2(1) DEFAULT ' ' NOT NULL , "X_READGENRLV" VARCHAR2(1) DEFAULT ' ' NOT NULL ,
"X_CONVGENRLV" VARCHAR2(1) DEFAULT ' ' NOT NULL , "DESCRPTN" VARCHAR2(50) DEFAULT ' ' NOT NULL
) TABLESPACE PSAPSTABD STORAGE (INITIAL 16384 NEXT
0000000040K MINEXTENTS 0000000001 MAXEXTENTS 0000000300
PCTINCREASE 0000 ))
DbSlExecute: rc = 106
(SQL error 955)
error message returned by DbSl:
ORA-00955: name is already used by an existing object
Regards,
RaHuL...

Analysis Services Processing Task - Error processing

Hi all,
I have a SSIS package containing an Analysis Services Processing Task. In case it fails, I want to insert the error messages in a table. I have create an SSIS package that fails because of dimension values that are not in the fact table. The package fails and
shows a number of errors in the debug window:
Error: 0xC1000007 at Create Cube, Analysis Services Execute DDL Task: Erreur interne : L'opération n'a pas abouti.
Warning: 0x811F0001 at Create Cube, Analysis Services Execute DDL Task: Erreurs dans le moteur de stockage OLAP :
Clé d'attribut introuvable lors du traitement de : Table : 'dbo_SSIS_DATA', Colonne : 'PRODCODE', Valeur : 'HUME'. L'attribut est 'PRODCODE'.
SSIS package "Step 2 - Create Cube.dtsx" finished: Failure.
However in the error list window there are 0 errors and 0 warnings.
So, why doesn't it show an error message in the error list when the package clearly fails. And how can I get the error messages from the log into a table? Thanks in advance.
Hugo

Error list does not reflect what is getting to be logged, it is more for package validation.
But the same errors will show up in the status, and the output window.
Furthermore, if your log is table bound (e.g. the sysssiserrorlog) and in the log config you chose to log the OnError events then these will be captured automatically.
Arthur
MyBlog
Twitter

10g Migration Problem: error shown when trying to call a report from form

Dear Friends,
I am working on migrating developer 2000 forms to 10g forms. I am using migration tool for this. Everything is going fine except calling report from a form.
Say, in the original form I had the following:
RUN_PRODUCT(REPORTS,’ C:\test1.rdf’,SYNCHRONOUS,RUNTIME,FILESYSTEM,pi_id,NULL);
After migration its has become:
rp2rro.rp2rro_run_product(REPORTS, ’ C:\test1.rdf’,SYNCHRONOUS,RUNTIME,FILESYSTEM,pi_id,NULL);
Then, I have kept the report ‘test1.rdf’ in the ‘OraHomeAS\reports\samples\demo\’ location and changed the above code into:
rp2rro.rp2rro_run_product(REPORTS,'test1.rdf',SYNCHRONOUS,RUNTIME,FILESYSTEM,pi_id,NULL);
Now the form runs fine on application server but it can’t call the report. While attempting to call the report, it shows the following error:
ORA-06508
FRM-40735
Please note that the report ‘test1.rdf’ individually runs fine on the application server and at the time of migration I provided all the information (e.g. report server name) correctly. If I am missing any package, please tell which package I am missing and where should I paste it.
Please help me because I am very close to the deadline!
Rgds,
Luther

Hi,
The conversion to use the rp2rrp call needs a library to resolve the call which I think is called rp2rro.pll.
It seems that this library is not being found at run time, which is what the ora-06508 error often means.
I guess that you have compiled the form and must therefore have the pll to compile, so it is the forms_path setting in the app server run time that might not be set.
Look at the environment file (default.env is the original name for this, if you haven't created a custom one) for the entry FORMS_PATH. Is the location of your library specified in the path ?? If not put the directory in, then stop and restart the app server.
rgds
Tony

RSEC_MIGRATION (Analysis Authrization Migration) AUFEX Error

Similar Messages

Maybe you are looking for