RSECADMIN: Hierarchy node checked can not be interpreted (trace)

Hi there,
Time for me to ask for your help.
When using RSECADMIN for tracing Hierarchy Analysys Authorization I cannot interpreted the hierarchy node that is checked:
- The authorizations found are displayed as a clickable text e.g.  Node 1  and the value can be found below the check
- The hierarchy node checked however is displayed as e.g.  Node 4 1 0 7 1 and I can not translate this node to any existing node in my hierarchy.
[See this picture |http://farm4.static.flickr.com/3172/2978379084_acdf6baba5_o.jpg]that shows an example.
Could anybody help me to find out the checked authorization node?
Thank you!
Kind regards,
Lodewijk

Hi Steve,
Thanks for your reaction, in this case the problem indeed might be something else instead of the ZKLANT node. I will have a look at it rightaway.
Nevertheless I find it very discomforting that these strange node numbers seem to be of no use at all.
Can anyone shine a light on this issue?
Thanks,
Lodewijk

Similar Messages

  • Hierarchy Node Variable is not displaying full list of Hierarchy

    Hi,
    I loaded Hierarchy  to an info object using flat file.
    When i created a test reports and settings to display of MAster Data of Char and executed the report
    The output displays full list of Hierarchy
    Now to have a User Entry on Hierarchy ...created a Hierarchy Node variable and executed the value help of Hierarchy Node variable is not displaying fill list of Hierarchy ...its only displaying first 15 entries in Hierarchy.
    I changed the settings of variable...etc but couldn't get the Hierarchy full list in User entry selection
    How can i fix it...
    Thanks in advance

    If anyone has the same problem, I think I found the reason when transported to production.
    BW7.3 (at least) can not show the hierarchy nodes if there is no transactional data loaded.
    So do your hierarchies only after the data has been loaded..

  • 0GLACCEXT hierarchy nodes description ( text ) not displaying

    Hi Gurus,
    I have uploaded 0GLACCEXT hierarchy from ECC system in to BI 7.0. I can only see the hierarchy nodes in the RSH1 and in the reports as well for 0GLACCEXT.But I am not able to see the hierarchy nodes description like under Expenses > salaries , wages , housing etc .....only its GL accounts is displaying like 700100 , 700200
    I also uploaded Text datasource ( 0GL_ACCOUNT_TEXT ) for 0GLACCEXT , the text is loading without any problem but the changes are not being reflected in the RSH1 and the reports.
    Regards,
    -Neha

    Hi KP,
    Thanks for your reply , the text for 0GL_ACCOUNT is displaying fine , I don't have any issues with 0GL_ACCOUNT , my main concern is I'm using Financial Statement item 0GLACCEXT   for Balance Sheet and P&L Statement (for period accounting) by using Virtual Cube 0FIGL_VC1  the Text is not displaying in the reports as well as in RSH1 , where as for 0GL_ACCOUNT the hierarchies and text are working and displaying fine.
    I'm closing this thread , the problem has been solved
    it was related to mappings in Transfer rules.
    Regards,
    -Neha
    Edited by: Nehabibo on Dec 18, 2010 11:46 AM
    Edited by: Nehabibo on Dec 18, 2010 11:47 AM

  • Hierarchy Node Intial load from R/3 to CRM 5.2

    Hi
    I have this problem when download form R/3 4.6c to CRM 5.2 hierarchy node.
    Can you help me?
    It's very important because we are blocked.
    Thanks
    Best regards.
    we downloaded the following customer hierarchy:
    0002189004
    - 0002199004
    - 0002190509
    - 0002010050
    using the object DNL_BUPA_KNVH.
    In this way the table CRM_KNVH_TEMP has been filled correctly with all
    the structure.
    We executed the BPH_DNL transaction selecting only the hierarchy type
    D,
    and the sales org D468, distr chann 01 , divsion 99.
    After saving the hierarchy we created all the hierarchy structure in
    CRM but there are not any customers linked to the related hierachy node.In particular we found the followng situation:
    table BUT_HIER_NODE, filled with all the hierarchy node
    table BUT_HIER_NODE_D fille with all the descrption of the hiarachy
    node in english language
    table BUT_HIER_STRUCT filled with the structure and the link between
    node
    tables BUT_HIER_TREE,. BUT_HIER_TREE_d filled with all our hiearcy type
    table BUT_HIER_NODE_BP empty
    also:
    the method "assign_bp_to_node" is only executed in the the private
    method
    "change_record" but it is commented in the method "create record" and
    also
    "build_crm_tree".
    In conclusion the method "start_initial_down_load2 (executed int the
    function CRM_BUHI_INITIAL_DOWNLOAD) call the method 2build_crm_tree2,
    but this method never execute "assign_bp_to_node".

    I have found a propoer articulation of my problem in SAP note 429423. It goes as follows:
    <i>"No entry exists in one of the queues, but the status in R3AM1 remains 'Running':
    In this case, probably no reply is sent to the CRM Server after the data selection in the source system.If this is the case for an adapter object but not for others, contact the respective application component which can analyze why the source system does not send a reply and correct it.
    If this system response occurs for all adapter objects, create a message for component CRM-MW-ADP."</i>
    However, I am unable to act on the above. Kindly suggest what exactly needs to be done as suggested in the note.

  • BW Hierarchy node Variable - Value help Issue in Crystal Report

    Dear All,
    1. We have created the BW-Query with Hierarchy node Variable .
    2. On the above query we have preapred Crystal Report.
    3. We have published the Crystal Report using BW Publisher ( Through Content Administrator in BW).
    4. Followed the steps as below link.
    http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsandBWquery+elements
    Problem:
    When we are accessing the Crystal Report in the InfoView BW-Hierarchy node variable is not appearing in the value help as a tree structure ( It is appearing as a list ).
    Please suggest me the solution.
    Thanks & Regards,
    Kiran Manyam.

    Classic Crystal Reports and Classic SAP connectivity questions
    Classic Crystal Reports and Classic SAP connectivity questions

  • Insert new hierarchy nodes for key figures

    Hi All,
    In BI 7.0. when you right click on the key figure folder , you get an option called " insert new hierarchy node". Can anyone please explain what is this feature for. Is is just for reporting purpose where you can drill down for a particular key figure for more clarity. Thanks in advance.
    Regards,
    Satish

    Hi,
    This is for reporting purpose.
    For example you have four key figures which consists the "TOTAL DEMAND".
    Suppose TOTAL DEMAND = Purchase Requistion + Planned Order + Purchase Order + Production Order
    We may provide hierarchy on TOTAL DEMAND, so that in display you may expand TOTAL DEMAND. When expanding TOTAL DEMAND it will show all four key figures with the total numbers in TOTAL DEMAND.
    You may refer follwoing document as well.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c6e6ed94-0501-0010-2886-b6944515cfd9
    I hope it will help.
    Thanks,
    S

  • BW-Hierarchy node variable in Crystal Report

    Hi crystal gurus,
    I am creating a report on top of BW-Query Using SAP toolbar. We are having a Hierarchy node variable for WBS Element in our Bw-Query.
    Now that hierarchy node variable is not behaving properly in crystal reports.
    When I execute Query at BW side it Provides me with proper result, say for example if i execute the query for a WBS element "X" and that element consists of other elements inside it like A, B, C etc then at BW side it gives me proper data considering all the WBS elements but in Crystal reports the Data returned is just for the Specified WBS element, i.e it return me data specific to WBS element "X" only.
    Any Ideas why this is happening and how to resolve this?
    Any help will be Appreciated.
    Thanks & regards
    Neeraj

    Hi Debi,
    thank you very much for your reply, but i am afraid that you may have misunderstood my Question.
    Actually I am using a hierarchy node variable, and as usual that hierarchy node has certain level. so when i m executing the report in CR say for node value/level  L1 then it provides me data specific for the node L1 only but logically it should provide me with data of node L1 and all other nodes below L1& that is not happening in my case. while whenever i m executing the same report with same values at BW Side it provides me proper result I.E. it provides me data for node L1 and all other nodes below it.
    Hope this makes my Ques clear.
    Thanks & Regards
    Neeraj

  • W7 PCs on router LAN port can not find Wireless connected OJ Pro 8500A Plus following router upgrade

    My Broadband Supplier has replaced my internet router with a new one with dual N band Wireless and GigE LAN ports. The 8500A printer has been successfully WPA wirelessly connected and works fine with a wireless connected Sony windows 7 laptop and Apple devices.  However neither of the Dell LAN connected windows 7 desktop PCs or the same Sony laptop when connected to a LAN port on the router can find the printer.  I have tried reinstalling the printer software with the latest version from the HP site OJ8500_A910_1315 and the installation fails as network environment checker can not find the printer. I have run the HP network diagnostics with both firewalls in the PC and router disabled with no success. The LAN itself seems to be working OK as the PCs can see each other, exchange files and and can access the internet.  The router has been checked by the broadband supplier technical uupport.  The printer is visible as a network connected device in Windows explorer so you would expect the HP software to see it. Is the only option to fix the printers IP address and use that in the installion procedure or are there other settings I can alter to get the HP network environment checker to work properly?  Thoughts would be appreciated.
    This question was solved.
    View Solution.

    In the router settings look for "wireless isolation", "AP isolation" or the like and make sure it is DISABLED.  This setting disables communication between the wired and wireless clients.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • CRS Can not start instance PRKP-1001

    Hello
    I have a 2 node database and on the first node I can not start the instance using srvctl start instance it gives the following error: PRKP-1001 : Error starting instance htdb1 on node telepin1. When I start it using sqlplus it is ok.
    Can someone please explain?
    Thanks

    Do you also see CRS-0215? There's a known problem , when parameter sqlnet.inbound_connect_timeout is set in sqlnet.ora, it should be unset. Unfortunately the error is a little bit generic, if this parameter is currently not set, you have another problem.
    Werner

  • Master Data load does not extract Hierarchy nodes in BPC Dimension ACCOUNT

    Hi Experts,
    I am performing master data load through standard DM package with Filter selection as:
    1. Chart of Accounts
    2. Hieararchy selection has 4 hierarchy names
    3. Selected Import Text nodes
    4. Selected Set Filters by Attribute OR Hierarchies
    I have run this DM package for a set of data and selections a week ago and it worked fine.
    However when i run it now, it is giving issues,
    It extracts any new GL maintained in the BI system however it does not extract any hierarchy nodes at all! (Have tested this by deleting the hierarchy nodes and tried to run the master data load)
    I am running the DM package in Update and have selection as External.
    Any sugestions for checks / has anyone encountered this issue earlier?
    Regards,
    Shweta Salpe

    Hi Guyz,
    Thanks.
    I found that the issue was with the transformation file where i was maintaining the RATETYPE.
    When i removed the mapping of RATETYPE this works fine. (Pulls the nodes of hierarchies)
    however now i do not have Ratetype populated in the system.
    my rate type mapping is:
    RATETYPE=*IF(ID(1:1)=*STR(C) then *STR(TOSKIP);ID(1:1)=*STR(H) then *STR(TOSKIP);ID)
    and in conversion file i have TOSKIP     *skip
    I have to skip the ratetypes for the hierarchy nodes and my hierarchy nodes start with C and H.
    So now that i have removed the mapping for RATETYPE can anyone suggest me a correct way to achieve this? (Note the above mapping formula was skipping all of the hierarchy nodes starting with C and H)
    Regards,
    Shweta Salpe

  • Hierarchy Node not summing  properly in Bex Analyzer

    Hi Folks,
                      I am facing an issue in my report where the Hierarchy node is not summing up numbers properly.  Just a simple example
               Char 1   Value
               123        10.1
                231         2.1
                122        -2.1
    Node 1 -
                            10 (instead of 10.1)
    I have tried NODIM functional already and also tried exception aggregation (since I can't use "Calculate result as" option in a heirarchy) for my keyfigues. Please help as I can't think of any other solution. It seems like the node is ignoring the rounding of values which is done by bex for leafs automatically and is only bringing result priod to rounding. This is my assumption. Looking forward to suggestions. Thanks
    Regards,
      Asad

    Asad,
        Check the no of decimal places you have set for the key figures. Change it to the required no of decimal places.

  • Hierarchy Node Variable search (find) option not working

    Hi Experts - I have created a hierarchy node varibale on a fixed hierarchy. When user run the report and click on hierarchy node variable selection option , A new window will pop up which has all the nodes.
    As the list is quite big and has many levels , On the same pop up , we have find option , when we enter any node in the find box , its always give a ABAP Dump , It never works for me...
    Is node find/search in not working in Bi 7.0 .
    Thanks
    R

    Hi Rohan,
    We can restrict the hierchey level at property of of the hiearchey enabled characteristic.
    Hope this hels...let me know if u require any further info on this..
    Best Regards,
    Maruthi

  • Exclude a hierarchy node by using exit variable (not in query designer)

    Hi gurus!!
    I have a hierarchy for the infoObject 0COSTELMNT. Depending on the user who executes the report, the node '0599ADJUSTMENTS' must be displayed or not.
    I am trying to solve it by using an exit variable:
    Varible Type: Hierarchy Node
    Processing : Exit
    On the exit, I have entered the following code:
          IF ( sy-subrc = 0 ).
              l_s_range-sign = 'E' .
              l_s_range-opt  = 'EQ' .
              l_s_range-low = 'AJUSTES'.
              APPEND l_s_range TO e_t_range.
         ENDIF.
    But unfortunately does no work!!
    Any ideas?
    Thanks in advance
    Regards.
    Carmen Rodríguez

    Hi,
    Check the below link gives good knowledge on variables:
    http://help.sap.com/saphelp_nw04s/helpdata/en/cf/579b3c494d8e15e10000000a114084/content.htm
    Reg
    Pra

  • Hierarchy node variable - successor node data not displayed

    Hello,
    I have a query with a hierarchy in the ‘rows’ section. This hierarchy is restricted by a hierarchy node variable with the following settings: variable type ‘hierarchy node’; customer exit; single value; mandatory; not ready for input; cannot be changed in query navigation.
    The customer exit correctly supplies the node. However, only data for THIS node is displayed in the query results. And data for successor/underlying nodes is NOT displayed.
    I tried several things, including:
    - rightclick ‘Rows’ > ‘Display as a Hierarchy’
    - customer exit variable: multiple values instead of single value; optional instead of mandatory
    In the ‘Hierarchy Attributes’ for the hierarchy, nothing is checkmarked, except for Root/Totals Item Appears Above’ and ‘Drilldown start level = 00’. The hierarchy and its nodes are valid from 01.07.2005 to 31.12.9999.
    I have a feeling in what area the solution can be found, but I have no clue what to do further on with it. As a test I replaced the customer exit variable with a user entry variable. If I then execute the query, I can select either the ‘node’ or the ‘value’ (both with the same technical value!). If I select the node, I get all data, including data for successor nodes. If I select the value, I only get the data for the node, not the underlying successor nodes. For some reason, the customer exit variable behaves like the latter and not like the first. I do not know how to solve this.
    I would greatly appreciate if you could help me out of this issue here.
    Kind regards,
    Frank

    Hi,
    no, it doesn't. It just returns the data for the node and not for the underlying nodes.
    Frank

  • Hierarchy node Variable: F4 Help - Not showing Master data values

    Hi,
    We're having some problems trying to display the F4 help of a hierarchy node selection variable, to show the master data values so that it would look more complete for the users during report execution.
    In the RSD1 setting for the info object, under 'Business Explorer' tab, the 'Query Execution Filter Val. Selectn' is set to 'Only Posted Values for Navigation'.
    I thot that we could overwrite this setting at the Query Designer level, but it does not seem to work.
    Even tho in the Query Designer, we have already specified the 'Filter Value Selection During Query Execution' to 'Values in Master Data Table', it does not seem to display the master data values.
    There is no difference in the F4 values being displayed for the hier node variable, before and after the change in Query Designer.
    Could anyone share some tips on other possible solutions to get a hier node selection variable's F4 help to show the master data values, without changing the RSD1 setting at the info object level please ?
    Thanks in advance for your help.
    Regards,
    Femmie.

    Hi,
    Could you please share the steps you have taken to fix the problem?
    We do have a similar problem and for some reason the newly added hierarchy node for 0Profit_ctr is not showing up in the variable selection screen F4 (input selection for query execution). However we can see this node when we display that hierarchy in RSA1. I did try applying the changes recommened by Jerome but unfortunately it didn't work.
    Any help on this would be greatly appreciated.
    Thanks,
    Krish

Maybe you are looking for