RSEOUT00 failing with "Could not write IDoc to file" TPRI_DEF table

Outbound Idoc processing fail with the following error:
Could not write IDoc to file
Message no. EA299
Diagnosis
The system could not convert data from the data record 000027.
Procedure
Check the port definition of the receiver port.
You can use the "Continue despite conversion error" option to write the IDoc to the file from transaction BD87 with replacement characters.
Short dump indicate that there is a some junk character in th e TPRI_DEF for program SAPLSPRI that it is unable to convert.
I have set the flag on the we21 port to "continue despite conversion error" and that seem to help, but I would like to figure out how to fix the junk characters from coming through from the TPRI_DEF table.
This is what shows up in the short dump after RSEOUT00 is run.
TPRI_DEF                                   / /       : :     00002932
    010GV21            \0\0\0\0\x0006āȂ耀㐱〲\0\0嬇\0ሟ鴂푎眩\x0802儔잏퉓
I do not see any entries for area "GV" in the table, there is one for "GF". which has no user assigned to it and it is of key version 21.
I am not sure if the table is supposed to have an entry with no user assigned?
thank you for looking at this issue .

HI Jurgen,
we have the same issue, chinese charecter is in PO text header. so facing error. If we click unicode format then it works fine as my testing in development.
I just want to knom what is the impact if i clicked directly unicode format ?( with refernce to your reply above " have you set the Unicode format flag directly above in WE21?" )
I doc is going from SAP sytem - (PO information )
Pls adivce..
waiting for your reply..
Thanks in advance

Similar Messages

Could not write to the file. It may have been opened with insufficient ...

Cannot add item to keychain with the above error
Is there a solution?
An error has occured. Unable to add an item to the current keychain.
Could not write to the file. It may have been opened with insufficient access privileges

Is there any more background information that you care to add to help enlighten us?

Bi publisher "Could not write to configuration file"

Running 10.1.3.4.1, Whenever I try to create a new resource I get "Could not write to configuration file" message.
If I look in the WLS log I see Server failed to obtain lock for /Security/principals.xml
If I look in XMLP/Admin/Security, I see principals.xml.lock file with todays date
All files in the xmlpserver folder are owned by the weblogic user

moving the deployment from a nfs mount to a local file system resolved the problem

"Could not write to configuration file" when config Publisher in admin tab

Hi guys,
I have install OBIEE 10.3.3.4 on an RH linux box (with OS user obiee) and Oracle Application Server 10.1.3.1 on the same box (with OS user oraias).
When I want to change some parameter in the admin tab of BI publisher (Administrator/Administrator as the login name/pass) and click "Apply",
I get the error "Could not write to configuration file". After I change the configuration properties to 777 the error is sitll there. And I also try to change the SECURITY MODEL to XDO, but still no use.
I made a test, for example, when I change something in admin--JDBC--Oracle BIEE and then apply, I got the error. If I update xmlp/DataSource/datasources.xml manually, the change can be seen after I reopen the page admin--JDBC--Oracle BIEE. That means I find the correct file and the file access properties is ok.
For other parameters such as Scheduler Configuration, I got the same error when apply. But the "Test connection" and "Install schema" work.
Can somebody give me some advise on this ? Thanks
Scott
Edited by: Typhoon on Mar 20, 2009 12:59 AM

I have install the same version(basic install) on another windows box, everything seems good...
And below is the error log I find in application.log
09/03/19 13:31:53.956 xmlpserver: Servlet error
java.lang.NullPointerException
     at java.util.Hashtable.put(Hashtable.java:396)
     at oracle.apps.xdo.servlet.ui.admin.SchedulerConfigPage.handleSubmit(SchedulerConfigPage.java:248)
     at oracle.apps.xdo.servlet.ui.admin.SchedulerConfigPage.doPost(SchedulerConfigPage.java:166)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:86)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)

XML DB repository/ Could not write to configuration file

I have one problem when I create same JDBC datasource and test connection I get: "Connection established successfully". but when I trying to save it I get: "Could not write to configuration file".
I using Oracle XE 10g database and "system" user for JNDI connection. I tryed with new user witch I gived all database permissions but I get same error message.
Do you have any idea what do I need to configure.
Thanks!

This error happens, when the file permission is missing.
or the file got corrupted, change the permission to Admin folder.
Check the folder permission to this oc4j\j2ee\home\applications\xmlpserver\xmlpserver\WEB-INF

Could not write the AIF file (session error)

I receive the error "Could not write the AIF file (session error)" when trying to record to Sound Track using any of my USB input microphones. Does anybody know how to resolve the problem?
Also, does anybody have any suggestions about what product to use to produce good multi-track audio files. I am interested in both a hardware and a software solution. It seems that using the standard Apple software that comes on the new G5s does not offer any good solutions.

Update to Snow Leopard then update Final Cut Studio. Chances are your problem will have been fixed.
In my experience, in previous iterations of STP there were a number of serious bugs related to saving files. Running everything up-to-date, however, I am no longer having those problems (knock on wood).

SQL Server Installation failing saying 'Could not write values to registry key \SOFTWARE. Verify you have sufficient access or contact support personnel'

Hi,
I am trying to install SQL server 2012/SQL Server 2014 and I constantly keep getting this error and the Management Tools fails to install.
'Could not write values to registry key \SOFTWARE. Verify you have sufficient access or contact support personnel'
Tried installing even SQL Server 2008 and still get the same error.
Below is the log i get from C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140705_151943\sql_ssms_Cpu64_1.log
MSI (s) (FC:D8) [15:22:55:746]: Executing op: RegAddValue(Name=SQLPath,Value=C:\Program Files (x86)\Microsoft SQL Server\110\Tools,)
MSI (s) (FC:D8) [15:22:55:746]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE,,BinaryType=0,,)
MSI (s) (FC:D8) [15:22:55:746]: Executing op: RegAddValue(,,)
MSI (s) (FC:D8) [15:22:55:746]: Note: 1: 1406 2: 3: SOFTWARE 4: 5
MSI (s) (FC:D8) [15:22:59:434]: Product: SQL Server 2012 Management Studio -- Error 1406. Could not write value to key \SOFTWARE. System error . Verify that you have sufficient access to that key, or contact your support personnel.
Error 1406. Could not write value to key \SOFTWARE. System error . Verify that you have sufficient access to that key, or contact your support personnel.
MSI (s) (FC:D8) [15:23:03:435]: User policy value 'DisableRollback' is 0
MSI (s) (FC:D8) [15:23:03:435]: Machine policy value 'DisableRollback' is 0
Action ended 15:23:03: InstallFinalize. Return value 3.
Just not able to figure out what the problem is, can someone help?
Thanks

Hi,
Thanks for providing log
Following is in the log.
01) 2014-07-09 11:08:53 Slp: Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel.
(01) 2014-07-09 11:08:58 Slp: Watson bucket for generic failure has been created
(01) 2014-07-09 11:08:58 Slp: Error: Action "Install_sql_ssms_Cpu64_Action" failed during execution.
(01) 2014-07-09 11:08:58 Slp: Completed Action: Install_sql_ssms_Cpu64_Action, returned False
(01) 2014-07-09 11:08:59 Slp: ----------------------------------------------------------------------
(01) 2014-07-09 11:08:59 Slp: Running Action: Install_sql_tools_Cpu64_Action
(01) 2014-07-09 11:08:59 Slp: Sco: File 'D:\Softwares\SQL2012\DeveloperEdition\x64\setup\x64\sql_tools.msi' does not exist
(01) 2014-07-09 11:07:00 Slp: Sco: File 'D:\Softwares\SQL2012\DeveloperEdition\x64\setup\x64\sql_ssms.msi' does not exist
(01) 2014-07-09 11:07:00 Slp: Checkpoint: PREINSTALL_SQL_SSMS_CPU64_ACTION
(01) 2014-07-09 11:07:00 Slp: Sco: Waiting for service 'msiserver' to accept the stop request.
(01) 2014-07-09 11:07:00 Slp: Sco: Attempting to open SC Manager
(01) 2014-07-09 11:07:00 Slp: Sco: Attempting to open service handle for service msiserver
(01) 2014-07-09 11:07:00 Slp: Invoking QueryServiceStatus Win32 API
(01) 2014-07-09 11:07:00 Slp: Sco: Attempting to close service handle for service msiserver
(01) 2014-07-09 11:07:00 Slp: Sco: Attempting to close SC Manager
(01) 2014-07-09 11:07:00 Slp: Target package: "D:\Softwares\SQL2012\DeveloperEdition\x64\setup\sql_ssms.msi"
(01) 2014-07-09 11:07:57 Slp: MSI Error: 1406 Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel.
(01) 2014-07-09 11:08:38 Slp: InstallPackage: MsiInstallProduct returned the result code 1603.
(01) 2014-07-09 11:08:38 Slp: Using MSI error code to detect the retry option: 1406
(01) 2014-07-09 11:08:38 Slp: No retry-able MSI return code detected.
(01) 2014-07-09 11:08:38 Slp: Watson Bucket 2
Original Parameter Values
From above it seems client tools component is missing from Installation or may be problem with Windows installer but I guess this is not issue with windows installer . Can you re download SQL Server package and run again.
Edit: For further analysis can you also post log from below location on skydrive
C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140709_104804\sql_ssms_Cpu64_1.log
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Install of SAP HANA Studio Dev Ed v1.00.80 fails with "Could not create the Java Virtual Machine"

Hello,
Scope: JVM error during initial install of SAP HANA Studio Developer Edition v1.00.80, Win86/32bit
Source: installation files pulled from HANA Studio tab at https://hanadeveditionsapicl.hana.ondemand.com/hanadevedition/, which is a link from the main HANA site of http://scn.sap.com/community/developer-center/hana. zip folder: "sap_hana_win32_studio_rev80"
Targeted O/S: Windows 7, 32-bit, local Java is SE 7, update 67.   Java environment has been confirmed via checks provided at http://www.java.com/en/download/manual.jsp
Actions taken:
Attempted to update the installation's eclipse.ini file by reducing the -Xmx value; see details below.
Read thru postings such as http://scn.sap.com/thread/3390626 and the threads it recommended.
Checked OSS (ie Note 1859686 - HANA Studio does not start)
Description of installation error:
Shortly after executing "hdbinst", it fails with the error "Could not create the Java Virtual Machine". I've verified that there is nearly 3G of memory free. What I did notice, as shown in the attached files, is that Eclipse is part of this installation and it's pre-loaded with the "eclipse.ini". I firmly believe the solution could be to reduce parameter "-Xmx1024m" to "-Xmx512m" but it's a catch-22 because even after updating eclipse.ini (in installation folder C:\Program Files\SAP\hdbstudio\tmp_p2director2014.08.13_13.36.44\director), the install program requires that the "hdbstudio" folder to be empty upon restarting it.
Since the installation is basically a package with a lot of .jar files, there is no eclipse.ini file available in the source install folder; otherwise, updating it there would be the easiest solution if that option were available. The file is only available in the targeted deployment folder above.
If you have encountered this same error and were able to resolve it, I would be grateful to know of your solution. Thanks very much.
FYI: the HANA Client installed with no issues.
Jim Cleek
FYI: the images below reflect the sequence of images produced during the installation.
after clicking OK above, the screen below gets updated (see the "is not empty" msg).
Below is the eclipse.ini file located in the deployed/target folder:
Message was edited by: Jim Cleek
FYI: Using information from the SAP HANA Database - Studio Installation and Update Guide, I tried to override the installation's use of its eclipse.ini file by passing my own modified version (with "-Xmx512m") of that file that was placed in a separate folder. The cmd used via DOS window was "hdbsetup.exe -a studio --configfile=C:\Users\Admin\Downloads\eclipse.ini" and even though it successfully launched the SAP HANA Lifecycle Management gui, it failed on the first step with the same JVM create error as above because it appears to have used its own eclipse.ini file, which has "-Xmx1024m".

Update: a message was opened with SAP but unfortunately they could not provide a resolution for this particular scenario. They admitted that the eclipse.ini file cannot be updated since it is bundled as part of the installation package. One point to make that I did not make before was that this was being attempted on an Oracle VirtualBox (4.3.10); the SAP HANA contact said he assumed that SAP has not tested this particular scenario, thus it could not be supported.
Resolution: the end result was to abort trying to install SAP HANA Client and Studio on the Oracle VirtualBox but to install it locally on my own desktop, which runs on Windows 7 Enterprise 64-bit with 8G of memory. The SAP HANA files below were downloaded, extracted and installed successfully in the order shown.
FYI: the Studio installation detected that a 64-bit version of Java was not installed so I installed that and then adjusted the User environmental variable JAVA_HOME to point to that new path, leaving the System variable still pointing to the pre-existing 32-bit Java path.
SAPCAR 7.20 -> Windows on x64 64bit: SAPCAR_315-20010453.EXE
IMDB_CLIENT100_80_0-10009664.SAR   Revision 80 for SAP HANA CLIENT 1.00
Support Package SAP HANA CLIENT 1.00 Windows on x64 64bit
IMC_STUDIO100_80_0-20007647.SAR   Revision 80 for SAP HANA STUDIO 1.00
Support Package SAP HANA STUDIO 1.00 Windows on x64 64bit
jre-7u67-windows-x64.exe - http://www.oracle.com/technetwork/java/javase/downloads/jre7-downloads-1880261.html
Jim Cleek
HP Enterprise Services

PDF download in 3.1 fails with "could not open" error

Just created a couple interactive reports and was truly dazzled by the functionality. But when I try to download to PDF, Acrobat Reader 8.1.1 errors with msg "... could not open <file> because it's either not a supported file type or because the file has been damaged...."
No problem with CSV download.
Is there some special Acrobat plugin that's needed?

Its true its not required, but the instructions for deploying the war file advise you to use enterprise manager console, which you won't have if you have just got XE or if you have installed a database without Enterprise manager.
Ideally we need a method of deploying the war file directly
Step 1: Installing the WAR file
Place the fop.war file (located in apex_install_directory/utlities/fop) in an accessible location on your local machine. You then follow the directions below or can view the process by running this viewlet.
Navigate to your OC4J Oracle Enterprise Manager Console eg: http://localhost:8888/em/
Select the Applications Tab
Select Deploy Button
On the "Deploy: Select Archive" page use the option "Archive is present on local host. Upload the archive to the server where Application Server Control is running." Use the file browse to select the fop.war file and click "Next" button
On the "Deploy: Application Attributes" page set the "Application Name" option to "fop" and clear the "Context Root " option and click "Next" Button
On the Deploy: Deployment Settings click the "Deploy" button Message was edited by:
Keith Jamieson

Configuring OS X Server 3.1.2 : server.app fails with "Could Not Connect to the Server"

Hi All,
I am trying to install OS X Server using server.app 3.1.2. but after installation when i try to connect it is giving "Could Not Connect to the Server" error. is there any way to find out the logs or debug this problem. Since the error isn't giving any indication of the reason of the failure.

Hi Linc,
Thanks for you prompt reply, below are the logs....
9/15/14 7:56:58.229 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:57:28.287 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:57:58.315 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:58:24.653 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 7:58:28.379 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:58:58.428 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:59:13.752 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 7:59:28.496 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:59:58.568 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:00:06.460 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 8:00:16.854 AM Console[369]: setPresentationOptions called with NSApplicationPresentationFullScreen when there is no visible fullscreen window; this call will be ignored.
9/15/14 8:00:28.567 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:00:58.623 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:01:16.101 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 8:01:28.668 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:01:53.596 AM WindowServer[95]: CGXGetConnectionProperty: Invalid connection 42003
9/15/14 8:01:53.752 AM ocspd[84]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7fa6c9e102a0> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:01:53.954 AM com.apple.serveralertproxy[386]: ApplePushService: APSConnection being used without a delegate queue
9/15/14 8:01:58.666 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:02:14.303 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 8:02:28.669 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:02:58.697 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:03:10.186 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 8:03:28.699 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:03:58.726 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:04:06.022 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 8:04:28.782 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)

Workflow Manager - Add-WFHost fails with "Could not load file" error

Hello! I'm not sure that its Sharepoint related topic but..
I'm trying to install Workflow Manager using Powershell. I'm successfully created ServiceBus farm, create namespace, Add-SBhost etc. Also, i created WF Farm using New-WFFarm.
Now i'm got SB Configuration and try to add my first host to WF Farm using standard cmdlets:
$SBClientConfiguration = Get-SBClientConfiguration -Namespaces 'WorkflowDefaultNamespace'
(it successfuly gives me some endpoint definitions)
Add-WFHost -WFFarmDBConnectionString $WFFarmDBConStr -RunAsPassword $ServiceAccountPassword -EnableFirewallRules $true -SBClientConfiguration $SBClientConfiguration -CertificateAutoGenerationKey $CertificateAutoGenerationKey
where
$WFFarmDBConStr is typical connection string, i also used this to Get-WFFarm with no errors.
$ServiceAccountPassword and $CertificateAutoGenerationKey are secure strings.
But trouble appears with SBClientConfiguration, cmdlet returns error:
"Cannot validate argument on parameter 'SBClientConiguration'. Could not load file or assebly 'Microsoft.ServiceBus, Version=1.8.0.0, Culture=neutral, PublicKeyToken=<SomeTokenSymbolsHere> or one of its dependencies. The system cannot
find the file specified."
What file it tries to load? I've installed all WorkflowManager binaries with
webpicmd /Install /Product:WorkflowManagerRefresh key and don't know, what can be cause.

Hi lehus,
According to your description, my understanding is that you got an error when you configured Workflow Manager using PowerShell.
Please try to use the following PowerShell command, compare the result:
Add-WFHost -WFFarmDBConnectionString $WFFarmDBConStr -RunAsPassword $ServiceAccountPassword -EnableFirewallRules $true -SBClientConfiguration $SBClientConfiguration
–EnableHttpPort -CertificateAutoGenerationKey $CertificateAutoGenerationKey
-Verbose
Check your process as:
http://lennytech.wordpress.com/2013/06/02/configuring-workflow-manager-1-0-using-powershell/
In addition, whether you could install and configure Workflow Manager with Workflow Manager Configuration Wizard. Please have a try as:
http://prabathf.blogspot.com/2013/02/installing-and-configuring-workflow-for.html
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Win 8.1 Pro, iTunes install fails with "could not open key"

Have tried complete uninstall as required by "Remove and reinstall" Did not work.

Okay ... although you've got a Windows 8 (rather than a 7 or a Vista), let's try the following user tip:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\[LongStringOfLettersAndNumbe rs]" error messages when installing iTunes for Windows

Adding secondary ADFS server to farm fails with Could Not Load Assembly error

Hi all,
I have two servers running Server 2012 R2.
There are two AD sites, in site 1, I have the primary ADFS server running on a member server. In site 2 I have a secondary ADFS server running on the only DC in the site. There will be WAP servers publishing these servers in either site.
I successfully set up the first ADFS server in site 1, and this is working ok. However, when I set up the server in site 2 I get the following error during the prerequisite checker:
Could not load file or assembly 'System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' or one of its dependencies. Access is denied.
Unable to retrieve configuration from the primary server. Could not load file or assembly 'System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' or one of its dependencies. Access is denied.
I ran this as my domain admin account and also as domain\administrator which is seldom used.
When I run the resulting PowerShell script, I get errors relating to the GSMA, so not sure if that is where my issue lies. Here is the script:
# Windows PowerShell script for AD FS Deployment
Import-Module ADFS
# Get the credential used for performaing installation/configuration of ADFS
$installationCredential = Get-Credential -Message "Enter the credential for the account used to perform the configuration."
Add-AdfsFarmNode `
-CertificateThumbprint:"Thumbprint Here" `
-Credential:$installationCredential `
-GroupServiceAccountIdentifier:"DOMAIN\STSSvc`$" `
-PrimaryComputerName:"machine.domain.net"
I tried using the FQDN of the ADFS server as well as the common name of sts.domain.net, neither worked.
Any suggestions?
Andrew Hodgson

Hi,
Thanks for your post.
According to the error message, it is more about permission issue.
Please refer to this artile about how to resolve the error "Could not load file or assembly or one of its dependencies. Access is denied"
http://blogs.msdn.com/b/sayanghosh/archive/2007/04/21/solution-to-could-not-load-file-or-assembly-or-one-of-its-dependencies-access-is-denied.aspx
Regards.
Vivian Wang

Could not write the Aiff file (session error)

When I put Soundtrack Pro into record I get this error message. Anyone had this happen? Did you solve it?

Update to Snow Leopard then update Final Cut Studio. Chances are your problem will have been fixed.
In my experience, in previous iterations of STP there were a number of serious bugs related to saving files. Running everything up-to-date, however, I am no longer having those problems (knock on wood).

Failed to install ms sql 2012, it shows 1406 Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel. error

Hi friends,
i have tried to install ms sql 2012 on windows 8.1 pro 64 bit but it got failed due to the following error 1406 Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel..
I had run the set up file as administrator. I have ony one user account on my laptop. I have seen in the regestry about permission of user. There is full control to the user. I have also tried the solution related to this issue that are available in
this forum and other.
I have also attache the detail.txt log file here
So i am heartily requesting you guys if you have the solution then please post your solution as soon as possible.
Thanks in advance!!!

Looks like this is a permission issue with account you logged in in your operating system or account if any you chooses to run you SQL Server installation . Or for executing setup file try using run as administrator.
http://www.sperrysoftware.com/kb/questions/7/How+to+Troubleshoot+a+%22Error+1406%3A+Could+not+write+value...%22+or+%22Error+1406%3A+Could+not+write+InstanceIndex+to+key...%22+error+message
http://support.microsoft.com/kb/913559
Raju Rasagounder Sr MSSQL DBA

RSEOUT00 failing with "Could not write IDoc to file" TPRI_DEF table

Similar Messages

Maybe you are looking for