RSMDCNVEXIT

Hello Gurus,
We are upgrading from BW 3.1 to BI 7.0. When I run the transaction RSMDCNVEXIT and executing "Estimate Preliminary Check/Work", I get an error in the log with an "yellow" sign.
Error text: 430 characteristics found with affected conversion routines
I have no idea about what this means or how to fix it, so any input is useful.
Thanks in Advance,
... Venkat.

Note 447341 contains all the details about ALPHA conversion. Read it first to gain some understanding.

Similar Messages

  • Error Running tcode RSMDCNVEXIT

    Hi All, While running tcode RSRV in BW stage(upgraded to 7.0) to check consistency of infoobject 0RT_SEAYR, I got inconsistency error:
    "There are 1 values with the wrong internal format in the SID table"
    when I run <b>RSMDCNVEXIT</b> to Convert Inconsistent Internal Characteristic Values. I get the below <b>error</b>.
    <b>Data conversion functions are no longer supported</b>
    Both Dev & Stage BW environments have this error. BW producion which is on 3.5 doesn't have this error.
    Kindly help
    PK

    I went back and reviewed the doc on RSMDCNVEXIT as I have been struggling with trying to cleanup our MD before we convert to 7.0.
    The Help for RSMDCNVEXIT says something to the effect that with 3.0, the BW's consistency checks are strict enough that you should have inconsistencies any more.  But there are different things that can still cause MD inconsistencies, such as MD load failures, or a new Note that indicates running MD reorgs can cause problems ( <b>Note 1071894 - Master data inconsistent after master data re-organization</b> recommends not running any MD reorgs until they fix the bug).
    For inconsistencies that can not be corrected via RSRV my only suggestion is to try to the Delete Master Data.  Maybe the inconsistency is for a value that is not in any transactions.  If nothing else a review of the MD Delete log in SLG1 should tell you what the first (and hopefully only) InfoProvider is that it found the SID in question.  From there, perhaps you could perform a Selective Deletion and then reload that transaction witha good SID value.  Maybe you just live with inconsistency if it won't effect user's queries.
    Might be a good question to open a Customer Message with SAP about.   What do they recommend to correct a MD inconsistency.  I'd like to see SAP's response.

  • RSMDCNVEXIT - Warning !

    Hello SDNs,
    How ya all ?
    We are about to Upgrade our <b>BW 3.0B system to 3.5</b> - For this we need to complete the <i>"Converting Inconsistent Characteristic Values with a Conversion Routine"</i> as specified in the <i>"Product-Specific Information for the SAP BW Upgrade" - SAP NetWeaver '04
    Component Upgrade Guide</i>.
    We executed the Transaction <b>RSMDCNVEXIT</b> and found these seetings there.
    <b>System Status : X All Characteristics Have Correct Internal Values (Disabled)
    System is locked (Checked & Disabled)</b>
    Then under <b>Initial Value Check</b> we selected <b>Estimate Preliminary Check/Work</b>. On selecting the DISPLAY LOGS we see an entry with my Username and with YELLOW Signal. Only one line is in WARNING STATUS with the message
    <b>"214 characteristics found with affected conversion routines"</b>
    Then we selected under <b>Initial Value Check</b> -> <b>Check Internal Values a nd Determine Chars. to be Converted</b>. Again on selecting the DISPLAY LOGS we  could see another entry with my Username and with YELLOW Signal. Only one line is in WARNING STATUS with the message
    <b>"214 characteristics found with affected conversion routines"</b>
    The 214 InfoObjects are not shown and its unknown, how to know them ?
    How to proceed from this point ?! What we have to do with these 214 InfoObjects or we shall proceed with warning and Upgrade the BW ?
    Best Regards....
    Sankar Kumar
    +91 98403 47141

    Hi Sankar,
    As far as I can recall, there should be a log file icon, or you can try double clicking on the message to see if it brings you to some other logs.  I thought this transaction allows you to check and execute the changes?
    The transaction is SCC4.  But I suggest that you check with your Basis before making the system modifiable.
    On top of that, note that there should be NO loading etc on the system when it is running alpha conversion.
    Cheers,
    Gimmo

  • List of tcode in BW/BI

    Hi
    please let me know list of tcodes in bw/bi

    Hi Suneel,
    MODELING
    RSA1 - Modeling
    RSORBCT - Business Content
    RSORMDR - Meta Data Repository
    Object Maintenance
    RSDMPROM - MultiProvider
    RSISET - InfoSet
    RSDCUBE - InfoCube
    RSDODSD - ODS Object
    RSD1 - Info Object
    Master Data Maintenance
    RSDMD - Master Data
    RSH1 - Hierarchies
    BUSINESS EXPLORER
    RRMX - Analyzer
    Authorizations
    PFCG - Maintain Roles
    RSSM - Reporting Authorizations Objects
    Query
    RSZC - Copy
    RSZDELETE - Delete Object
    RSBBS - RRI targets
    BEx Monitor
    RSRT1 - Query Monitor
    RSRTRACE - Trace Tool
    RSRCACHE - OLAP : Cache Monitor
    SMICM - ICM Monitor
    RSA6 Maintain DataSources
    RSA7 BW Delta Queue Monitor
    RSA8 DataSource Repository
    RSA9 Transfer Application Components
    RSD1 Characteristic maintenance
    RSD2 Maintenance of key figures
    RSD3 Maintenance of units
    RSD4 Maintenance of time characteristics
    RSDBC DB connect
    RSDDV Maintaining Aggregates
    RSIMPCUR Load Exchange Rates from File
    RSISET Maintain InfoSets
    RSKC Maintaining the Permittd Extra Chars
    RSLGMP Maintain RSLOGSYSMAP
    RSMO Data Load Monitor Start
    RSMON BW Administrator Workbench
    RSOR BW Metadata Repository
    RSORBCT BI Business Content Transfer
    RSORMDR BW Metadata Repository
    RSPC Process Chain Maintenance
    RSPC1 Process Chain Display
    RSPCM Monitor daily process chains
    RSRCACHE OLAP: Cache Monitor
    RSRT Start of the report monitor
    RSRT1 Start of the Report Monitor
    RSRT2 Start of the Report Monitor
    RSRTRACE Set trace configuration
    RSRTRACETEST Trace tool configuration
    RSRV Analysis and Repair of BW Objects
    SE03 Transport Organizer Tools
    SE06 Set Up Transport Organizer
    SE07 CTS Status Display
    SE09 Transport Organizer
    SE10 Transport Organizer
    SE11 ABAP Dictionary
    SE24 Class Builder
    SE80 Object Navigator
    RSCUSTA Maintain BW Settings
    RSCUSTA2 ODS Settings
    RSCUSTV*
    RSSM Authorizations for Reporting
    SM04 User List
    SM12 Display and Delete Locks
    SM21 Online System Log Analysis
    SM37 Overview of job selection
    SM50 Work Process Overview
    SM51 List of SAP Systems
    SM58 Asynchronous RFC Error Log
    SM59 RFC Destinations (Display/Maintain)
    LISTCUBE List viewer for InfoCubes
    LISTSCHEMA Show InfoCube schema
    DB02 Tables and Indexes Monitor
    DB14 Display DBA Operation Logs
    DB16 Display DB Check Results
    DB20 Update DB Statistics
    r/3 (bw related)
    SBIW BIW in IMG for OLTP
    BD61 Activate Change Pointers - Generally
    BDLS Convert Logical System Names
    BF11 Application Areas
    RSA2 OLTP Metadata Repository
    RSA3 Extractor Checker
    RSA5 Install Business Content
    RSA6 Maintain DataSources
    RSA7 BW Delta Queue Monitor
    RSA8 DataSource Repository
    RSA9 Transfer Application Components
    RSO2 Oltp Metadata Repository
    RSO3 Set Up Deltas for Master Data
    LO setup table
    OLI1BW INVCO Stat. Setup: Material Movemts
    OLI2BW INVCO Stat. Setup: Stor. Loc. Stocks
    OLI3BW Reorg.PURCHIS BW Extract Structures
    OLI4BW Reorg. PPIS Extract Structures
    OLI7BW Reorg. of VIS Extr. Struct.: Order
    OLI8BW Reorg. VIS Extr. Str.: Delivery
    OLI9BW Reorg. VIS Extr. Str.: Invoices
    OLIABW Setup: BW agency business
    OLIFBW Reorg. Rep. Manuf. Extr. Structs
    OLIIBW Reorg. of PM Info System for BW
    OLIQBW QM Infosystem Reorganization for BW
    OLISBW Reorg. of CS Info System for BW
    OLIZBW INVCO Setup: Invoice Verification
    TSTCT IS THE TABLE WHICH CONTAINS TRANSACTION CODES
    TO GET LIST OF TRANSACTION CODES IN BW
    1.GO TO SE93
    2. PRESS F4
    3. IN THE SEARCH TYPE RS* TO GET THE LIST OF TRANSACTION CODES STARTING WITH RS.
    Here r the some of the transaction codes used by BW developers
    RSBO INFOSPOKE
    RSBOMO2 OPEN HUB MONITOR
    RSBOH1 OPEN HUB MAINTANENCE
    RSBOH2 OPEN HUB MAINTANENCE
    RSBOH3 OPEN HUB MAINTANENCE
    RSBO_EXTRACT AUTHORIZATION CHECK OPEN HUB EXTRACTION
    RSA1 ADMINISTRATOR WORK BENCH
    RSA3 EXTRACTION CHECKER
    RSA5 TRANSFER BUSINESS CONTENT
    RSA6 POST PROCESS OF DATA SORUCES
    RSA7 DELTA QUEUE MONITOR
    RSA8 DATA SOURCE REPOSITORY
    RSA9 TRANSFER APPLICATION COMPONENTS
    RSADMIN MAINTENANCE VIEW
    RSATTR ATTRIBUTE HIERARCHY RUN REALIGNMENT
    RSBBS QUERY JUMP TARGER
    RSD1 MAINTAIN INFO OBJECT
    RSDBC DB CONNECT
    RSDDV AGGREGATE MAINTANENCE
    RSDL DB CONNECT TEST PROGRAM
    RSH1 EDIT HIERARCHY
    RSH3 SIMULATE HIERARCHY
    RSIMG BW IMG
    RSIS1 CREATE INFO SOURCES
    RSISET MAINTAIN INFO SETS
    RSKC MAINTAIN PERMITTED CHARACTERS
    RSMO MONITOR
    RSO2 GENERIC DATA SOURCE
    RSO3 SET UP DELTA FOR GENERIC DATA SOURCE
    RSPC PROCESS CHAIN MAINTENANCE
    RSRAJ START REPORTING AGENT JOB
    RSRT REPORT MONITOR
    RSRTRACE SET TRACE CONFIGURATION
    RSRV ANALYSIS AND REPARI OR BW OBJECTS
    RSSM AUTHORIZATIONS FOR REPORTING
    RSSMQ START QUERY WITH USER
    RSSU53 DISPLAY BW AUTHORIZATION CHECK
    RSZC COPY QUERIES BETWEEN INFO PROVIDERS
    RSZDELETE DELETE QUERY OBJECTS
    RRMX TO GO TO BEX REPORTING FROM RSA1
    SM37 JOB SELECTION/STATUS
    SM38 ABAP EDITOR
    rsa11 InfoProvider
    rsa12 InfoSources
    rsa15 PSA
    RSODS EDIT ODS
    RSD1 EDIT INFO OBJECT
    SU53 CHECKING FOR AUTHORIZATIONS
    RS00 Start menu
    RS12 Overview of master data locks
    RSA0 Content Settings Maintenance
    RSA1 BW Administrator Workbench
    RSA10 Realtime Test Interface Srce System
    RSA11 Calling up AWB with the IC tree
    RSA12 Calling up AWB with the IS tree
    RSA13 Calling up AWB with the LG tree
    RSA14 Calling up AWB with the IO tree
    RSA15 Calling up AWB with the ODS tree
    RSA1OLD BW Administrator Workbench (old)
    RSA2 OLTP Metadata Repository
    RSA3 Extractor Checker
    RSA5 Install Business Content
    RSA6 Maintain DataSources
    RSA7 BW Delta Queue Monitor
    RSA8 DataSource Repository
    RSA9 Transfer Application Components
    RSADMIN RSADMIN maintenance
    RSADRTC70TOADR11 Conversion of table TC70 in ADR11
    RSANWB Model the Analysis Process
    RSANWB_CRM_ATTR Fill CRM Attributes
    RSANWB_EXEC Execute Analysis Process
    RSANWB_IMP Calculation of Importance
    RSANWB_START_ALL Model the Analysis Process
    RSANWB_SURVEY Analysis Process: Create Target Grp
    RSAN_CLTV CLTV Modeling
    RSAN_CLTV1 CLTV
    RSAN_RESP Response Prediction Models
    RSAN_RFM RFM Modeling
    RSAN_SALES_PL_CALL Execute Sales Planning
    RSAN_SURV_SHOW BW Survey
    RSAN_SURV_TG BW Survey: Target Group Management
    RSAN_VERI Analysis Process: Test Monitor
    RSAN_WB_TST IMC Wrapper Transaction for Testing
    RSARCH_ADMIN BW Archive Administration
    RSARFCEX Variant for RSARFCEX
    RSASSIBTCH Schedule Assistant in Background
    RSATTR Attribute/Hierarchy Realignment Run
    RSAWB New AWB
    RSAWBSETTINGSDEL Delete user settings of the AWB
    RSB0 Maintain OLAP authorization object
    RSB1 Display authorization object
    RSB2 Data Marts Generation Center
    RSBBS Maintaining BW Sender-Receiver
    RSBBS_WEB Transaction for the RRI in the Web
    RSBCTMA_AC xCBL Action Codes
    RSBCTMA_DT Mapping of Ext./Int. Document Type
    RSBEB Business Explorer Browser
    RSBMO2 Open Hub Monitor
    RSBO Open Hub Maintenance
    RSBOH1 Open Hub Maintenance
    RSBOH2 Open Hub Maintenance
    RSBOH3 Open Hub Maintenance
    RSBO_EXTRACT Auth Check Open Hub Extraction
    RSBROWSER BW Browser
    RSBWREMOTE Create Warehouse User
    RSCATTAWB CATT Admin. Workbench
    RSCDS Summarization routine
    RSCONCHA Channel conversion
    RSCONFAV Favorites Conversion
    RSCRMDEBUG Set Debug Options
    RSCRMISQ Regis. of Infosets for Target Groups
    RSCRMMDX Edit MDX
    RSCRMMON Monitor Query Extracts
    RSCRMSCEN Regist. Closed-Loop Scenarios
    RSCRM_BAPI Test Program for RSCRM Interface
    RSCRM_REPORT BW Queries with ODBO (to 2nd 0B)
    RSCRT BW Monitor (Near)-Real-Time Loading
    RSCR_MAINT_PUBLISH Maint. of Publishing Variables CR/CE
    RSCR_MAINT_URL Maint. of URL Variables for CR/CE
    RSCUSTA Maintain BW Settings
    RSCUSTA2 ODS Settings
    RSCUSTV1 BW Customizing - View 1
    RSCUSTV10 BW Customizing - View 10
    RSCUSTV11 BW Customizing - View 11
    RSCUSTV12 Microsoft Analysis Services
    RSCUSTV13 RRI Settings for Web Reporting
    RSCUSTV14 OLAP: Cache Parameters
    RSCUSTV15 BW Customizing - View 11
    RSCUSTV16 BW Reporting
    RSCUSTV17 Settings: Currency Translation
    RSCUSTV18 DB Connect Settings
    RSCUSTV19 InfoSet Settings
    RSCUSTV2 BW Customizing - View 2
    RSCUSTV3 BW Customizing - View 3
    RSCUSTV4 BW Customizing - View 4
    RSCUSTV5 BW Customizing - View 5
    RSCUSTV6 BW Customizing - View 6
    RSCUSTV7 BW Customizing - View 7
    RSCUSTV8 BW Customizing - View 8
    RSCUSTV9 BW Customizing - View 9
    RSD1 Characteristic maintenance
    RSD2 Maintenance of key figures
    RSD3 Maintenance of units
    RSD4 Maintenance of time characteristics
    RSD5 Internal: Maint. of Techn. Chars
    RSDBC DB connect
    RSDB_ADD_ID_2_CRM Create External ID for CRM-GP
    RSDB_INIT Initial Download of D&B Data
    RSDCUBE Start: InfoCube editing
    RSDCUBED Start: InfoCube editing
    RSDCUBEM Start: InfoCube editing
    RSDDV Maintaining Aggregates
    RSDIOBC Start: InfoObject catalog editing
    RSDIOBCD Start: InfoObject catalog editing
    RSDIOBCM Start: InfoObject catalog editing
    RSDL DB Connect - Test Program
    RSDMD Master Data Maintenance w.Prev. Sel.
    RSDMD_TEST Master Data Test
    RSDMPRO Initial Screen: MultiProvider Proc.
    RSDMPROD Initial Screen: MultiProvider Proc.
    RSDMPROM Initial Screen: MultiProvider Proc.
    RSDMWB Data Mining Workbench
    RSDODS Initial Screen: ODS Object Processng
    RSDODSD Initial Screen: ODS Proces. (Deliv.)
    RSDPMDDBSETUP Creates a MOLAP Database in MSAS
    RSDPMOLAPDS MOLAP DataSource creation
    RSDPRFCDSETUP Create MOLAP Rfc Tests
    RSDSD DataSource Documentation
    RSDU_SHOWTEMPINCTAB RSDU_SHOWTEMPINCTAB
    RSDV Validity Slice Maintenance
    RSD_ACAT Maintain InfoObject catalog
    RSEDIT Old editor
    RSEIDOCM Variant for RSEIDOCM
    RSENQ Display of Lock Log
    RSEOUT00 Variant for RSEOUT00
    RSFH Test Transaction Data Extractors
    RSFLAT Flat MDX
    RSFREQUPL Frequent upload from source systems
    RSGWLST Accessible Gateways
    RSH1 Edit hierarchy initial screen
    RSH3 Simulate hierarchies
    RSHIER Hierarchy maintenance w/o AdmWB
    RSHIERINT Hierarchy maintenance from AdmWB
    RSHIERSIM Simulate hierarchies
    RSICUBE Maintain/Change InfoCubes (Internal)
    RSIMG BW IMG
    RSIMPCUR Load Exchange Rates from File
    RSINPUT Manual Data Entry
    RSIR_DELTATRACK KPro Delta Tracking
    RSISET Maintain InfoSets
    RSKC Maintaining the Permittd Extra Chars
    RSLDAPSYNC_USER LDAP Synchronization of Users
    RSLGMP Maintain RSLOGSYSMAP
    RSMD Extractor Checker
    RSMDCNVEXIT Conversn to Consistent Intern. Vals
    RSMDEXITON Activate Conversion Routine
    RSMO Data Load Monitor Start
    RSMON BW Administrator Workbench
    RSMONCOLOR Traffic light color in the Monitor
    RSMONITOR_DB D&B Integration
    RSMONMAIL Mail Addresses for Monitor Assistant
    RSNPGTEST Test Network Plan Control
    RSNPGTEST2 Test Network Plan Control
    RSNSPACE BW Namespace Maintenance
    RSO2 Oltp Metadata Repository
    RSO3 Set Up Deltas for Master Data
    RSOCONTENT Administration of a Content System
    RSOCOPY Copy from TLOGO Objects
    RSODADMIN Administration BW Document Managemt.
    RSOR BW Metadata Repository
    RSORBCT BI Business Content Transfer
    RSORMDR BW Metadata Repository
    RSPC Process Chain Maintenance
    RSPC1 Process Chain Display
    RSPCM Monitor daily process chains
    RSPFPAR Display profile parameter
    RSQ02 Maintain InfoSets
    RSQ10 SAP Query: Role Administration
    RSQ11 InfoSet Query: Web reporting
    RSRAJ Starts a Reporting Agent Job
    RSRAM Reporting Agent Monitor
    RSRAPS Manages Page Store
    RSRCACHE OLAP: Cache Monitor
    RSRCATTTRACE Catt transaction for trace tool
    RSREP BW Administrator Workbench
    RSRFCCHK RFC destinations with logon data
    RSRHIERARCHYVIRT Maintain Virtual Time Hierarchies
    RSRQ Data Load Monitor for a Request
    RSRR_WEB Report-Report Interface in Web
    RSRT Start of the report monitor
    RSRT1 Start of the Report Monitor
    RSRT2 Start of the Report Monitor
    RSRTRACE Set trace configuration
    RSRTRACETEST Trace tool configuration
    RSRV Analysis and Repair of BW Objects
    RSRVALT Analysis of the BW objects
    RSR_TRACE Trace Monitor
    RSR_WEB_VARIABLES Variable Entry in Web
    RSSCD100_PFCG Change Docs for Role Administration
    RSSCD100_PFCG_USER for Role Assignment
    RSSCM_APPL Application settings SCM4.0 and BW
    RSSD Access for scheduler
    RSSE Selection start InfoCube
    RSSGPCLA Maintain program class
    RSSG_BROWSER Simple Data Browser
    RSSM Authorizations for Reporting
    RSSMQ Start Query with User
    RSSMTRACE Reporting Log Authorization
    RSSTARTMON Starting the monitor in parall.proc.
    RSSU53 Display authorization check BW
    RST22 Old Short-Dump Overview
    RSTB Choose Object Name
    RSTBHIST Table history
    RSTG_BUPA Target Group Sel. Business Partners
    RSTG_CUST Target Group Selection Customers
    RSTG_DB Target Group Selection D&B
    RSTG_DB_WEB Target Group Selection D&B
    RSTPRFC Create Destination for After-Import
    RSU0 Update rules overview
    RSU1 Create update rules
    RSU1I Create update rules
    RSU1O Create Update Rules
    RSU2 Change update rules
    RSU2I Change update rules
    RSU2O Change Update Rules
    RSU3 Display update rules
    RSU3I Display update rules
    RSU3O Display Update Rules
    RSU6 Delete update rules
    RSU6I Delete update rules
    RSU6O Delete update rules
    RSU7 Data Extraction: Maintain Parameters
    RSUSR003 Check standard user passwords
    RSUSR200 List of Users per Login Date
    RSWELOGD Delete Event Trace
    RSWEWWDHMSHOW Display Background Job SWWERRE
    RSWEWWDHSHOW Display Work Item Deadline Monitorng
    RSWWCLEAR Execute Work Item Clearing Work
    RSWWCOND Execute Work Item Rule Monitoring
    RSWWDHEX ExecuteWorkItemDeadlineMonitoring
    RSWWERRE Start RSWWERRE
    RSZC Copying Queries between InfoCubes
    RSZDELETE Deletion of query objects
    RSZT Get Test Component
    RSZTESTFB Shortcut Function Test Environment
    RSZV Call up of view V_RSZGLOBV
    RSZVERSION Set frontend version
    RS_AWB_REMOTE Remote AWB Staging
    RS_BCT_BWBEOTYP Maintain BW Backend Object Types
    RS_DS_CHECK Check consistency request
    RS_ISTD_REMOTE Maintain InfoSource
    RS_LOGSYS_CHECK Source System Tool
    RS_PERS_ACTIVATE Activation of BEx Personalization
    RS_PERS_BOD_ACTIVATE Activate BEx Open Pers.
    RS_PERS_BOD_DEACTIVA Deactivate Pers. for BEx Open
    RS_PERS_VAR_ACTIVATE Activate Variable Pers.
    RS_PERS_VAR_DEACTIVA Deactivate Pers. for Variables
    RS_PERS_WTE_ACTIVATE Activate Web Template Pers.
    RS_PERS_WTE_DEACTIVA Deactivate Pers. for Web Template
    SP01 Spool
    RSA1 BW Administrator Workbench
    RSA11 Calling up AWB with the IC tree
    RSA12 Calling up AWB with the IS tree
    RSA13 Calling up AWB with the LG tree
    RSA14 Calling up AWB with the IO tree
    RSA15 Calling up AWB with the ODS tree
    RSA2 OLTP Metadata Repository
    RSA3 Extractor Checker
    RSA5 Install Business Content
    RSA6 Maintain DataSources
    RSA7 BW Delta Queue Monitor
    RSA8 DataSource Repository
    RSA9 Transfer Application Components
    RSD1 Characteristic maintenance
    RSD2 Maintenance of key figures
    RSD3 Maintenance of units
    RSD4 Maintenance of time characteristics
    RSDBC DB connect
    RSDCUBE Start: InfoCube editing
    RSDCUBED Start: InfoCube editing
    RSDCUBEM Start: InfoCube editing
    RSDDV Maintaining
    Aggregates
    RSDIOBC Start: InfoObject catalog editing
    RSDIOBCD Start: InfoObject catalog editing
    RSDIOBCM Start: InfoObject catalog editing
    RSDL DB Connect - Test Program
    RSDMD Master Data Maintenance w.Prev. Sel.
    RSDMD_TEST Master Data Test
    RSDMPRO Initial Screen: MultiProvider Proc.
    RSDMPROD Initial Screen: MultiProvider Proc.
    RSDMPROM Initial Screen: MultiProvider Proc.
    RSDMWB Customer Behavior Modeling
    RSDODS Initial Screen: ODS Object Processng
    RSIMPCUR Load Exchange Rates from File
    RSINPUT Manual Data Entry
    RSIS1 Create InfoSource
    RSIS2 Change InfoSource
    RSIS3 Display InfoSource
    RSISET Maintain InfoSets
    RSKC Maintaining the Permittd Extra Chars
    RSLGMP Maintain RSLOGSYSMAP
    RSMO Data Load Monitor Start
    RSMON BW Administrator Workbench
    RSOR BW Metadata Repository
    RSORBCT BI Business Content Transfer
    RSORMDR BW Metadata Repository
    RSPC Process Chain Maintenance
    RSPC1 Process Chain Display
    RSPCM Monitor daily process chains
    RSRCACHE OLAP: Cache Monitor
    RSRT Start of the report monitor
    RSRT1 Start of the Report Monitor
    RSRT2 Start of the Report Monitor
    RSRTRACE Set trace configuration
    RSRTRACETEST Trace tool configuration
    RSRV Analysis and Repair of BW Objects
    SE03 Transport Organizer Tools
    SE06 Set Up Transport Organizer
    SE07 CTS Status Display
    SE09 Transport Organizer
    SE10 Transport Organizer
    SE11 ABAP Dictionary
    SE18 Business Add-Ins: Definitions
    SE18_OLD Business Add-Ins: Definitions (Old)
    SE19 Business Add-Ins: Implementations
    SE19_OLD Business Add-Ins: Implementations
    SE21 Package Builder
    SE24 Class Builder
    SE80 Object Navigator
    RSCUSTA Maintain BW Settings
    RSCUSTA2 ODS Settings
    RSCUSTV*
    RSSM Authorizations for Reporting
    SM04 User List
    SM12 Display and Delete Locks
    SM21 Online System Log Analysis
    SM37 Overview of job selection
    SM50 Work Process Overview
    SM51 List of SAP Systems
    SM58 Asynchronous RFC Error Log
    SM59 RFC Destinations (Display/Maintain)
    LISTCUBE List viewer for InfoCubes
    LISTSCHEMA Show InfoCube schema
    WE02 Display IDoc
    WE05 IDoc Lists
    WE06 Active IDoc monitoring
    WE07 IDoc statistics
    WE08 Status File Interface
    WE09 Search for IDoc in Database
    WE10 Search for IDoc in Archive
    WE11 Delete IDocs
    WE12 Test Modified Inbound File
    WE14 Test Outbound Processing
    WE15 Test Outbound Processing from MC
    WE16 Test Inbound File
    WE17 Test Status File
    WE18 Generate Status File
    WE19 Test tool
    WE20 Partner Profiles
    WE21 Port definition
    WE23 Verification of IDoc processing
    DB02 Tables and Indexes Monitor
    DB14 Display DBA Operation Logs
    DB16 Display DB Check Results
    DB20 Update DB Statistics
    RSA1 BW Administrator Workbench
    RSA11 Calling up AWB with the IC tree
    RSA12 Calling up AWB with the IS tree
    RSA13 Calling up AWB with the LG tree
    RSA14 Calling up AWB with the IO tree
    RSA15 Calling up AWB with the ODS tree
    RSA2 OLTP Metadata Repository
    RSA3 Extractor Checker
    RSA5 Install Business Content
    RSA6 Maintain DataSources
    RSA7 BW Delta Queue Monitor
    RSA8 DataSource Repository
    RSA9 Transfer Application Components
    RSD1 Characteristic maintenance
    RSD2 Maintenance of key figures
    RSD3 Maintenance of units
    RSD4 Maintenance of time characteristics
    RSDBC DB connect
    RSDCUBE Start: InfoCube editing
    RSDCUBED Start: InfoCube editing
    RSDCUBEM Start: InfoCube editing
    RSDDV Maintaining
    Aggregates
    RSDIOBC Start: InfoObject catalog editing
    RSDIOBCD Start: InfoObject catalog editing
    RSDIOBCM Start: InfoObject catalog editing
    RSDL DB Connect - Test Program
    RSDMD Master Data Maintenance w.Prev. Sel.
    RSDMD_TEST Master Data Test
    RSDMPRO Initial Screen: MultiProvider Proc.
    RSDMPROD Initial Screen: MultiProvider Proc.
    RSDMPROM Initial Screen: MultiProvider Proc.
    RSDMWB Customer Behavior Modeling
    RSDODS Initial Screen: ODS Object Processng
    RSIMPCUR Load Exchange Rates from File
    RSINPUT Manual Data Entry
    RSIS1 Create InfoSource
    RSIS2 Change InfoSource
    RSIS3 Display InfoSource
    RSISET Maintain InfoSets
    RSKC Maintaining the Permittd Extra Chars
    RSLGMP Maintain RSLOGSYSMAP
    RSMO Data Load Monitor Start
    RSMON BW Administrator Workbench
    RSOR BW Metadata Repository
    RSORBCT BI Business Content Transfer
    RSORMDR BW Metadata Repository
    RSPC Process Chain Maintenance
    RSPC1 Process Chain Display
    RSPCM Monitor daily process chains
    RSRCACHE OLAP: Cache Monitor
    RSRT Start of the report monitor
    RSRT1 Start of the Report Monitor
    RSRT2 Start of the Report Monitor
    RSRTRACE Set trace configuration
    RSRTRACETEST Trace tool configuration
    RSRV Analysis and Repair of BW Objects
    SE03 Transport Organizer Tools
    SE06 Set Up Transport Organizer
    SE07 CTS Status Display
    SE09 Transport Organizer
    SE10 Transport Organizer
    SE11 ABAP Dictionary
    SE18 Business Add-Ins: Definitions
    SE18_OLD Business Add-Ins: Definitions (Old)
    SE19 Business Add-Ins: Implementations
    SE19_OLD Business Add-Ins: Implementations
    SE21 Package Builder
    SE24 Class Builder
    SE80 Object Navigator
    RSCUSTA Maintain BW Settings
    RSCUSTA2 ODS Settings
    RSCUSTV*
    RSSM Authorizations for Reporting
    SM04 User List
    SM12 Display and Delete Locks
    SM21 Online System Log Analysis
    SM37 Overview of job selection
    SM50 Work Process Overview
    SM51 List of SAP Systems
    SM58 Asynchronous RFC Error Log
    SM59 RFC Destinations (Display/Maintain)
    LISTCUBE List viewer for InfoCubes
    LISTSCHEMA Show InfoCube schema
    WE02 Display IDoc
    WE05 IDoc Lists
    WE06 Active IDoc monitoring
    WE07 IDoc statistics
    WE08 Status File Interface
    WE09 Search for IDoc in Database
    WE10 Search for IDoc in Archive
    WE11 Delete IDocs
    WE12 Test Modified Inbound File
    WE14 Test Outbound Processing
    WE15 Test Outbound Processing from MC
    WE16 Test Inbound File
    WE17 Test Status File
    WE18 Generate Status File
    WE19 Test tool
    WE20 Partner Profiles
    WE21 Port definition
    WE23 Verification of IDoc processing
    DB02 Tables and Indexes Monitor
    DB14 Display DBA Operation Logs
    DB16 Display DB Check Results
    DB20 Update DB Statistics
    Hope this helps
    Regards
    Hemant Khemani

  • SAP SCM 5.0 Upgrade

    Starting a forum thread for those of us who are upgrading to SCM 5.0    Please comment on the scope and/or challenges of your project.    Please post any advice.  
    Our upgrade project begins in January.   We will migrate from SCM 4.0 SP 18 to 5.0.    Integrated with R/3 4.6C and NetWeaver BI.  
    I expect our primary challenges will be the evaluation of existing customer exit logic.   Also we plan for several waves of integration tests.
    Regards,
    Mike

    We have just completed the prepare for 3.1 to 5.0.  I have taken my notes from a 3.0-4.1 upgrade and the most recent notes I have found and compiled them into the plan below.  So, basically... this is my best guess.  Good luck!!
    Pre-Upgrade     
    1) SAP GUI must be upgraded to 640 Patch 21     
    2) Run /SAPAPO/ADV_UPGRADE_50 program to check macro compatibility     
    PREPARE STAGE
    3) All transports in APQ must be released     Verification Only
    4) Run RSRV to check number ranges     Run RSRV
    5) Check number range for infoobject 0REQUID - OSS 961512
    6) Execute RSMDCNVEXIT Conversion to Consistent Internal Values - OSS 447341
    ALL STEPS IN PREPARE PROGRAM  - /SAPAPO/OM_LC_UPGRADE_50     
    7) Create number range interval for object IB_SYM_ID in 000 and 001 (SNRO - see note 203446)
    8) Allow multiple values for CDP data in 000 and 001     o1cl - see note 699162
    9) Run /SAPAPO/OM_CDP_41_PREP_CHECK     
    10)Run /SAPAPO/OM_CDP_41_PREP     
    11)Run /SAPAPO/PPM_UTC_PREPARE_DATA02 and convert all PPM's in 000 and 001     
    12)Run /SAPAPO/PPM_UTC_PREPARE_DATA01 and set status (yes) in 000 and 001     
    13)Backup DP Planning Area's
    14)Validate Planning Area backups
    15)Check SNP, DP, and PPDS job streams to make sure they completed successfully     
    16)Run consistency checks     OM17, /SAPAPO/TS_LCM_REORG & /SAPAPO/TS_LCM_CONS_CHECK
    UPGRADE
    17)Enter DDIC user for the RFC connection to BW     OSS 961512
    Basis performs upgrade     
    18)START CIF QUEUES     
    19)Check that user exits are active
    20)call transaction SPAU to adjust modifcations to repository objects     
    21)Regenerate IMG     click on binoculars in IMG and refresh
    22)Run /SAPAPO/RCIFRESTART to restart stuck queues     
    23)Run CIF_DELTA for some same plant \ prod's     
    24)Live Cache VALIDATION (Orders and Inventory) -  STO, Sales Orders Spot checking data against R/3 data
    25)Run program /SAPAPO/SCC_WORKAREA_ACTIVATE     OSS 621192 - Select "retain work area"
    26)Adjust \ recreate variants /SAPAPO/RLCDEL,  /SAPAPO/TS_PAREA_INITIALIZ     
    27)Adjust PA datasources - /SAPAPO/TS_PAREA_EXTR_DS_CHECK OSS 684929
    28)Activate delivered objects - /SAPAPO/TS_D_OBJECTS_COPY     OSS 684929
    29)Activate Infocubes - run report RSDG_CUBE_ACTIVATE     OSS - 588986 Choose Object Version D in section Infocube: Options.
    30)In Transaction SE11, check whether the 'Initial value' indicator is set for the MAINTPROG and USERAPP fields of the RSTSODS table - if it is not set, proceed as described in Note 914536.     OSS 906789
    31)run the RSSM_HASH_ENTRIES_CREATE report for all requests (using the corresponding parallel processing).     OSS 906789
    32)run the RSSTATMAN_CHECK_CONVERT_DTA and RSSTATMAN_CHECK_CONVERT_PSA reports (also using sufficient parallel processing). OSS 906789
    33)Activate update rules and transfer rules     use program RS_TRANSTRU_ACTIVATE_ALL for transfer rules
    34)Validate that R/3 and APO partner profile agreements are active (WE20)      
    35)Change partner profiles status to A (Active) in Classification tab(WE20)     
    36)Validate Remote infocube system assignments     RSA1
    37)Recreate Indexes and Stats on DP Planning Area backup infocubes RSA1
    38)Repair sourcesystems in APO and BW     RSA1
    39)Activate macros by running ZZZ_MACROS_CONS_CHECK     OSS 768433
    40)Validate validity dates for Time Horizon on the Storage Bucket Profiles, Resources, Planning Areas and Calendars     
    41)Delete timeseries on DP planning Area's
    42)Deactivate DP MPOS's     Taking Demand Planning Down
    43)Ensure that the fixing and locking functionality is set correctly for the DP planning areas before starting the restore
    44)Activate the Master Planning Object Structure (MPOS's)     
    45)Build Indexes and Stats for MPOS's     
    46)Re-build the variants for creating CVC's     
    47)Generate the CC's based off of the backup cubes     
    48)Build Indexes and Stats for MPOS     
    49)Create Time Series objects for PA (initialize planning area)      
    50)Turn off Livecache logging     
    51)Load DP planning area's from backup infocubes     
    52)Run planning area consistency checks,  /SAPAPO/TS_LCM_CONS_CHECK, /SAPAPO/TS_LCM_REORG     
    53)Turn on Livecache logging     
    54)Deactivate compatibility mode for macro books with yellow lights SCM 5.0 Upgrade Guide
    55)Convert the note anchor tables- /SAPAPO/TS_NOTES_CONVERT_40 with 'Check Note Anchors' option. OSS 588986
    56)If inconsistencies are found on the step above, then this program needs to be executed. /SAPAPO/TS_GEN_DOCTAB_CHECK      OSS 588986
    57)Run upgrade report for Lifecycle Planning /SAPAPO/RMDP_FCST_LC_UPGRADE     OSS 588986
    58)Create Variants for Proportional Factor Jobs, then execute the program and validate that they were created correctly.     
    59)Adjust existing planning board profile for PPDS      OSS 644295
    60)Update TLB - run /SAPAPO/TLBPRF_TRANS     OSS 707828
    61)Modify infoobjects 9AMATNR and 9ALOCNO to include med txt instead of short txt     RSA1

  • What is the impact of R/3 upgradation from 4.7 to ECC 6 on BI

    Dear all,
    Can any one tell me what will be the impact of R/3 Upgradation on BI... as we are shortly going to upgrade our R/3 from 4.7 to ECC 6.
    Do we need to take any precautions in R/3 and aswell as BI
    Please give the information...points will be given 
    Regards
    venu

    Hi
    Please Refer this as this vll give u the Pros and Cons for upgrade.
    Refer
    http://wiki.ittoolbox.com/index.php/Upgrade_BW_to_Netweaver_2004s_from_v3.0B
    This Wiki contains Rob Moore's ( BW Manager, Edwards Limited) team’s experiences in upgrading Business Warehouse System from 3.0B to BW 7.0.
    Contents
    1 Upgrading from BW 3.0B to BW 7.0 (Netweaver 2004s)
    2 Introduction
    3 Overview & Scope
    4 Drivers
    5 Environment
    6 Resource & Timescales
    7 High Level Plan
    8 Summary Task List
    8.1 #Support Pack Hike
    8.2 #Plug-in installation
    8.3 #PREPARE process
    8.4 #Dbase upgrades
    8.5 #System Upgrade
    9 Lessons Learnt
    10 Issues & Fixes
    10.1 Unfixed Issues
    10.2 Fixed Issues
    11 Regression Testing Process
    11.1 Introduction
    11.2 Set up
    11.3 Actions
    11.4 Security
    12 Transport Freeze
    13 Web Applications
    13.1 Dashboards
    13.2 Internet Graphics Server (IGS)
    14 Detailed Task Lists
    14.1 Support Pack Hike (detail)
    14.2 Plug-in installation (detail)
    14.3 Dbase upgrades (detail)
    14.4 PREPARE Process (detail)
    14.5 System Upgrade (detail)
    Upgrading from BW 3.0B to BW 7.0 (Netweaver 2004s)
    Introduction
    This Wiki contains my team’s experiences in upgrading our Business Warehouse System from 3.0B to BW 7.0.
    Hopefully it will be useful to anyone else who's about to embark on this. If there's anything I've missed or got wrong, then please feel free to edit it or contact me and I'll try to explain.
    Rob Moore - BW Manager, Edwards Limited.
    Overview & Scope
    This was to be a technical upgrade of BW only. The new BW 7.0 web functionality & tool suite which requires the Java stack rather than the ABAP stack was out of scope. We had heard that the latter was where most of the problems with the upgrade lay. Our plan is to wait for this part of BW 7.0 to become more stable. Also it has a big front end change and the business didn't have sufficient resource to cope with that much change management.
    Drivers
    3.0B at the end of its maintenance
    Opportunities to do better reporting
    Options to utilise BI Accelerator
    Environment
    Our R/3 system was at 4.6C and was not going to be upgraded. We have APO at version SCM4.0.
    Our BW system is approximately 300 GB, with 125 global users. It was at version 3.0B SP 18
    We have Development, Acceptance and Production environments.
    Resource & Timescales
    The Project ran for 3.5 months from Feb to May 2007. We used the following resources. The percentages are the approx. amount of their time spent on the project.
    Project Manager * 1 – 70%
    BW technical team * 3 – 50%
    ABAP coder * 1 – 10%
    SAP Systems Development expert * 1 – 20%
    Basis * 1 – 25%
    High Level Plan
    These are the basic areas. We planned to complete this process for each environment in turn, learning our lessons at each stage and incorporating into revised plans for the next environment. However we did the Support Packs and Plug-Ins in quick succession on all environments to keep our full transport path open as long as possible.
    Upgrade BW to the minimum support pack.
    Install R/3 Plug-ins PI 2004.1
    Run PREPARE on BW
    Dbase upgrades (Database & SAP Kernel upgrade)
    System Upgrade
    Summary Task List
    This list contains all the basic tasks that we performed. A more detailed check list is shown below for each of the headings.
    #Support Pack Hike
    We moved only to the minimum acceptable SP as this seemed most likely to avoid any problems with the 3.0B system prior to the upgrade.
    Apply OSS 780710 & 485741
    Run Baseline for Regression tests
    Full Backup
    Apply SP's (we were at SP18, going to SP20)
    SPAU list review
    Regression testing
    #Plug-in installation
    Apply SAP note 684844
    Import and patch Basis plugin PI 2004.1
    SPAU list review
    #PREPARE process
    BW Pre-Prepare tasks
    BW - Inconsistent Data fix
    Run PREPARE
    Review of results
    Any showstoppers from PREPARE?
    #Dbase upgrades
    Database Upgrade (FixPak)
    SAP Kernel Upgrade
    #System Upgrade
    Reverse Transport of Queries
    Reconnect DAB & SAB to AAE
    Run Baseline for Regression tests
    Full Backup
    Run the Upgrade
    SPAU list review
    Regression testing
    Lessons Learnt
    Testing is all! We picked up on a lot of issues, but would have picked up more if we'd had a full copy of our production environment to test over.
    Our approach of doing a full upgrade on each environment before moving to the next one paid dividends in giving us experience of issues and timescales.
    Write everything down as you go, so that by the time you get to upgrading production you've got a complete list of what to do.
    We succeeded because we had people on our team who had enough experience in Basis and BW to be able to troubleshoot issues and not just read the manual.
    The SAP upgrade guide is pretty good, if you can understand what they're on about...
    Remember the users! The fact that the loads have been successful doesn't count for anything unless the users can see the data in Excel! There's a tendency to get caught up in the technology and forget that it's all just a means to an end.
    Issues & Fixes
    I've listed the main issues that we encountered. I have not listed the various issues where Transfer rules became Inactive, DataSources needed replication or we had to reinstall some minor Business Content.
    Unfixed Issues
    We could not fix these issues, seems like SP 13 will help.
    Can’t delete individual request from ODS
    After PREPARE had been run, if we had a load failure and needed to set an ODS request to Red and delete it, we found that we could not. We raised an OSS with SAP but although they tried hard we couldn't get round it. We reset the PREPARE and still the issue persisted. Ultimately we just lived with the problem for a week until we upgraded production.
    Error when trying to save query to itself
    Any query with a re-usable structure cannot be saved (more thsan once!)
    OSS 975510 fixed the issue in Dev and Acc, but NOT in Production! SP 13 may solve this once it's released.
    Warning message when running some queries post-upgrade
    Time of calculation “Before Aggregation” is obsolete. Not a big issue so we haven't fixed this one yet!
    Process Chain Scheduling – Timing error
    Process chains get scheduled for the NEXT day sometimes and has to be manually reset.
    See OSS 1016317. Implement SP13 to fix this. We will live with it for now .
    Fixed Issues
    Duplicate Fiscal Period values in Query
    If you open up a drop down box ("Select Filter Value") for Fiscal Year/Period to filter your query, you are presented with duplicate entries for Month & Year.
    Due to Fiscal Year Period InfoObject taking data from Master Data not InfoProvider. Thus it picks up all available periods not just Z2.
    Auto-Emails being delayed
    Emails coming from BW from process chains are delayed 2 hours on BW before being released
    Due to userids that send these emails (e.g. ALEREMOTE) being registered on a diffferent timeazone (i.e. CET) from the BW system (i.e. GMT)
    “Pgm_Not_Found” short dump
    Whenever a query is run via RRMX or RSRT
    Call transaction RS_PERS_ACTIVATE to Activate History and Personalisation
    Characteristics not found
    When running a query the warning message Characteristic does not exist is displayed for the following: 0TCAACTVT, 0TCAIPROV, 0TCAVALID
    We activated the three characteristics listed and the warnings stopped. NO need to make them authorisation-relevant at this stage.(also did 0TCAKYFNM)
    System generated Z pgms have disappeared
    Post-upgrade the system Z-pgms ceased to exist
    Discovered in Development so we compared with pre-upgraded Production and then recreated them or copying them from production.
    Conversion issues with some Infoobjects
    Data fails to Activate in the ODS targets
    For the InfoObjects in question, set the flag so as not to convert the Internal values for these infoobjects
    InfoObject has Conversion routine that fails, causing load to fail
    The routine prefixes numeric PO Numbers with 0’s. SD loads were failing as it was not able to convert the numbers. Presumably the cause of the failure was the running of the Pre-Prepare RSMCNVEXIT pgm.
    Check the Tick box in the Update rule to do the conversion prior to loading rather than the other way round.
    Requests fail to Activate on numeric data
    Request loads OK (different from above issue) but fails to Activate
    Forced conversion within the update rules using Alpha routine. Deleted Request and reloaded from PSA.
    Database views missing after pre-PREPARE work
    Views got deleted from database, although not from data dictionary
    Recreated the views in the database using SE14.
    Workbook role assignations lost
    We lost a few thousand workbook assignments when we transported the role they were attached to into Production
    The workbooks did not exist in Development, thus they all went AWOL. We wrote an ABAP program to re-assign them in production
    Regression Testing Process
    Introduction
    We were limited to what we could do here. We didn't have a sandbox environment available. Nor did we have the opportunity to have a replica of our production data to test with, due to lack of disk space in Acceptance and lack of sufficient Basis resource.
    Set up
    We manually replicated our production process chains into test. We didn't have any legacy InfoPackages to worry about. We asked our super-users for a list of their "Top 10" most important queries and did a reverse transport of the queries from Production back into test (as we do not generally have a dev/acc/prodn process for managing queries, and they are mostly created solely in prodn). We made sure every application was represented. In retrospect we should have done some Workbooks as well, although that didn't give us any problems.
    Actions
    Prior to the various changes we loaded data via the Process chains and ran the example queries to give ourselves a baseline of data to test against. After the change we ran the same queries again and compared the results against the baseline. We tried to keep R/3 test environments as static as possible during this, although it wasn't always the case & we often had to explain away small changes in the results. After upgrading BW Development we connected it to Acceptance R/3, so that we had pre-upgrade (BW Acceptance) and post-upgrade (BW Development) both taking data from the same place so we could compare and contrast results on both BW systems. We did the same thing once BW Acceptance had been upgrading by connecting it (carefully!) to Production R/3. To get round the lack of disk space we tested by Application and deleted the data once that Application had been signed off. Once we got to System test we involved super-users to sign off some of the testing.
    Security
    We chose to implement the new security schema rather than choosing the option to stick with old. For us, with a relatively small number of users we felt we could get away with this & if it all went wrong, just temporarily give users a higher level role than they needed. Our security roles are not complex: we have end user, power-user and InfoProvider roles for each BW application, together with some common default roles for all. In the event we simply modified the default "Reports" role that all our users are assigned, transported it and it all went smoothly. Apart from the fact that everyone's workbooks are assigned to this role and so we "lost" them all !
    Transport Freeze
    Once you've upgraded Development you've lost your transport path. We planned around this as best we could and when absolutely necessary, developed directly in Acceptance or Production, applying those changes back to Development once the project was complete. Depending on what other BW projects you have running this may or may not cause you pain!
    Web Applications
    Dashboards
    We had various dashboards designed via Web Application Designer. All these continued to function on the upgraded system. However there were various formatting changes that occurred e.g. Bar graphs were changed to line graphs, text formats on axes changed etc. SAP provides an upgrade path for moving your Web applications by running various functions. However we took the view that we would simply re-format our dashboards manually, as we didn't have very many to do. Plus the external IGS (see below) powered all our environments and needs upgrading separately as part of the SAP method. Thus we couldn't have tested the SAP path in Development without risking Production. Sticking with manual mods was a lower risk approach for us. We did find we had to re-activate some templates from BC to get some of the reports to continue to work.
    Internet Graphics Server (IGS)
    We had an external IGS server with v3.0B. Post-upgrade the IGS becomes part of the internal architecture of BW and thge external server is redundant. We found no issues with this; after the upgrade BW simply stops using the external IGS and no separate config was needed.
    Detailed Task Lists
    Support Pack Hike (detail)
    Apply OSS 780710 & 485741
    Communicate outage to users
    Warning msg on screen
    Stop the jobs which extract data into delta queues
    Clear the delta queues by loading into BW
    Check RSA7 in PAE that delta queues are now empty
    Run Baseline for Regression tests
    Stop Delta queues
    Lock Out users
    Full Backup
    Apply SP's
    Upgrade the SAP kernel from 620 to 640
    SPAU list review
    Apply OSS Notes 768007 & 861890
    Unlock Test users (inc. RFC id's on R/3)
    Regression testing
    Regression sign-off
    Remove warning msg
    Unlock users
    User communication
    Plug-in installation (detail)
    Communicate outage to users
    Warning msg on screen
    Apply SAP note 684844
    Lock out users
    Full Backup
    Empty CRM queues
    Import and patch Basis plugin PI 2004.1
    SPAU list review
    Apply OSS 853130
    Switch back on flag in TBE11 (app. BC-MID)
    Remove warning msg
    Unlock users
    User communication
    Dbase upgrades
    Dbase upgrades (detail)
    Communicate outage to users
    Warning msg on screen
    Run Baseline for Regression tests
    Stop the Data extract jobs
    Full Backup
    Lock Out users
    Apply FixPak13SAP to DB2 database
    Upgrade the SAP kernel from 620 to 640
    Apply OSS 725746 - prevents RSRV short dump
    Unlock Test users (inc. RFC id's on R/3)
    Regression testing
    Regression sign-off
    Remove warning msg
    Unlock users
    User communication
    PREPARE Process (detail)
    Pre-PREPARE Process
    RSDG_ODSO_ACTIVATE
    Repair Info objects and recreate the views
    Communicate outage to users
    Warning msg on screen
    Run Baseline for Regression tests
    Stop the Data extract jobs
    Lock Out users
    Full Backup
    Run RSMDCNVEXIT Using BSSUPPORT ID
    If there conversion process runs longer delay the regular backup
    Re-run Baselines and sign off
    If there conversion process Fails repeat the steps on Sunday after the regular backup
    BW work
    Back up customer-specific entries in EDIFCT (note 865142)
    Activate all ODS objects
    Execute report RSUPGRCHECK with flag "ODS objects" (note 861890)
    Check Inconsistent InfoObjects - Upgr Guide 4.4; OSS 46272; Convert Data Classes of InfoCubes - Upgr Guide 4.3
    Execute report SAP_FACTVIEWS_RECREATE (note 563201)
    Make sure Delta queues are empty (RSA7)
    Basis Work
    Full Backup of BW
    Lock users
    Unlock id's RFC id's and designated test users
    Confirm backup complete OK
    Apply OSS 447341 Convert Inconsistent Characteristic Values - Upgr Guide 4.5
    Confirm OK to PREPARE
    Run PREPARE
    Review of results
    System Upgrade (detail)
    Communicate outage to users
    Process errors from PREPARE
    Check disk space availability for PAB
    Warning msg on screen
    Reverse Transport Queries from PAB to SAB & DAB
    Change BW to R/3 connection
    Get backup put on hold, for Ops to release later
    Ensure Saturday night backup is cancelled
    Final run of PREPARE
    Run Baseline for Regression tests
    Clear Delta Queues
    Delete Local Transports
    Remove process chains from schedule
    Lock Out users (with some exceptions)
    Confirm to Ops and Angie that we're ready
    Full Backup
    Incremental backup of Unix files
    UPGRADE "START"
    Back up kernel
    Unpack latest 700 kernel to upgrade directory
    Check ids required for upgrade are unlocked
    Check no outstanding updates
    Turn off DB2 archiving
    Open up the client for changes
    Stop saposcol, & delete from exe directory
    Run the Upgrade
    Execute the saproot.sh script
    Perform the database-specific actions
    Perform follow-up activities for the SAP kernel
    Reimport additional programs
    Import Support Packages
    Call transaction SGEN to generate ABAP loads
    Transport Management System (TMS)
    Handover to BW Team
    SPAU list review
    Apply OSS Notes from SPAU
    Process Function Module XXL_FULL_API (part of SPAU)
    Restore table EDIFCT (if required)
    Transport Fixes from our BW Issue list
    Convert the chart settings - manually
    Perform activities in the Authorization Area
    Activate hierarchy versions
    Update the where-used list
    Execute the conversion program for the product master
    Transport New roles to PAB
    Unlock selected users
    Regression testing
    Regression sign-off
    Go / No Go decision
    Restore if required
    Remove warning msg
    Tell Ops that the CR is now complete
    Lock down PAB
    Unlock users
    User communication
    Perform the follow-up activities for SAP Solution Manager
    Reschedule background jobs
    Reschedule weekly backup on Ctrl-M
    Drinks all round.
    Vendors mentioned: dBase
    Hope this helps.

  • How to migrate the Objects from 3.1c to BI7

    Hi,
    We are in Functional Upgradation.
    How to Migrate the Objects( Infocubes,DSO,Datasources,Rules...etc...) from 3.1C to BI 7.0
    Please help me to doing this....
    regards,
    anil

    BW Upgrade tasks (BW 3.1C to BI 7.0)
    Prepare Phase:
    Task     How-To     Who
    Review BI 7.0 feature lists     Review BI 7.0 feature lists for possible inclusion in developments.     Basis/BW
    Obtain the BI 7.0 upgrade guide     Download the upgrade guide from http://service.sap.com/inst-guides -> SAP NetWeaver -> Upgrade
         Basis/BW
    Review all upgrade SAP notes     In addition to the upgrade guide, check, download, and review all SAP notes for your upgrade
         BI 7.0 Upgrade notes
         SAP Web Application Server 6.40 upgrade notes
         OS and DB specific upgrade notes
         SAP BW Add-on upgrade notes
    (e.g. SAP SEM, ST-PI, etc)
         Plug-In upgrade SAP notes
         Other notes identified in above notes and/or upgrade guides.
         Basis/BW
    Check DB and OS requirements for the target SAP BW release     Check DB version/patch level and OS version/patch level required for upgrade
         First check the most current information from the SAP BW homepage http://Service.sap.com/BW  -> <SAP BW release> -> Availability
         Additionally, the u201CPlatformsu201D link will take you to the main DB/OS page for BI 7.0 and SAP Web AS 6.40.
         Note: In some cases there are differing requirements for SAP BW 3.0B/SAP BW 3.1 Content and BI 7.0
         Basis
    Check SAP BW Add-on upgrade requirements     Do you have SAP BW add-ons installed that require additional handling (e.g. SAP SEM, Enterprise Portal Plug-in, etc)?
         SAP SEM (SAP BW based components) requires SAP SEM 4.0 which is part of the mySAP ERP 2004 suite.
         WP-PI release must be at 6.00 before the upgrade begins. As mentioned before this add-on is merged with PI_Basis after the upgrade.
         Basis
    Check SAP BW upgrade requirements          Minimum Support Package and kernel levels for upgrade
         SAP BW Frontend requirements for new SAPGUI, SAP BW BEx Frontend and SAP BW Web applications.
         Source system Plug-In requirements     Basis
    Check compatibility requirements with 3rd party software          3rd Party Reporting tools (example: Crystal)
         ETL Tools (example:  Ascential, DataStage, etc)
         Scheduling tools (example. Control-M, Maestro, etc)
         Monitoring tools (example: HP OpenView, Patrol, etc)
         Other OS or DB related tools     Basis
    Check new component requirements for BI 7.0          If SAP BW web reports were developed in SAP BW 2.x, a windows version of IGS 6.40 (Internet Graphics Service) is required for conversion and future rendering of web graphics (i.e. Charts and GIS Maps).
    The IGS chart migration will also be required after the SAP BW web report conversion.
         If you used or activated any SAP BW Web Applications in SAP BW 3.x, or if you have used charts in SAP BW 2.x web reports, you will need a windows version of IGS 6.40 (Internet Graphics Service) to execute the IGS chart migration after the upgrade.
         If ESRI GIS software is in use, a different version of ESRI software maybe required for BI 7.0.  (ArcView 8.2?).
         If you plan to use Information Broadcasting, please review the requirement for additional infrastructure components such as EP, KMC, Workbook pre-calculation service, and Web AS connectivity to your mail servers.
    Detailed information is available in the SAP NetWeaver u201904 master planning guide (http://service.sap.com/instguides  -> SAP NetWeaver).
         Basis
    Test and distribute new SAP BW Frontend
              Install and test the new BI 7.0 Frontend (including the new version of SAPGUI for Windows if applicable).
         A detailed FAQ on the new BI 7.0 Frontend is available on the SAP service marketplace alias BWFAQ (http://service.sap.com/BWFAQ).
         After successful testing, the new SAPGUI for Windows and SAP BW Frontend can be distributed to the BW teams and end users.
         Basis
    Alpha Conversion:
    Ensure that your InfoObject data is consistent from a u201Cconversionu201D perspective (Alpha Converter tool)      Check that you have executed the Alpha Converter tool to check the consistency of your InfoObject definitions and data for InfoObjects that utilize the ALPHA, NUMCV and GJAHR conversion exits.
    Note: The Alpha conversion is not part of the SAP BW upgrade itself, but the upgrade simply checks to ensure you have successfully executed the check tool.
    Transaction RSMDCNVEXIT
    Check the system status:
         u201CAll Characteristics Have Correct Internal Valuesu201D: The Alpha converter has been successful executed. The upgrade preparation can continue.
         u201CNo Check yet/Inconsistent Internal Vales existu201D:
    The Alpha converter check has not been executed.
         u201CCharacteristics have Inconsistent Internal Valuesu201D:
    The Alpha converter tool check has been executed and data problems have been detected. The InfoObject and data must be processed before the upgrade can be started.
         BW
    Upgrade SAP Note updates     Check for newer versions of your SAP notes for the Upgrade.
    Tip: The SAP service marketplace offers an option to subscribe to OSS notes so you can be notified of changes when you log on.
         Basis/BW
    Confirm SAP BW support package, kernel and DB/OS configuration     Analyze current Support Package and DB/OS/Kernel configurations in your SAP BW landscape in relation to the SAP BW 3.x upgrade requirements.
         Apply necessary support packages, kernel patches, and DB and OS patches to meet upgrade requirements
         Basis
    Alignment of SAP BW objects within your SAP BW system landscape     Check and, where required, re-align SAP BW Objects and developments in your SAP BW system landscape (Development, Quality Assurance and Production).
    SAP BW Object differences can impact the quality of testing in the Development and Test environment and can lead to change management issues.
         This check is to minimize risk and ensure productive objects are being tested prior to the Production upgrade.
    Where alignment issues exist and realignment is not possible, alternative testing plans should be devised.
         Basis/BW
    Confirm all developments are deployed.     Ensure that all SAP BW developments are deployed or they are to be re-developed/tested after the upgrade.
         In the DEV system, all SAP BW development transports should be released (i.e. transport created and released) and imported to all downstream systems (i.e. QAS and PRD systems).
    For SAP BW developments not already collected in the transport collector, a decision must be made:
    Deploy the developments or wait until the upgrade has completed to deploy.
    o     Development to be deployed should be collected, released, and imported into the QAS and PRD systems.
    o     Developments that should be deployed after the upgrade should be re-tested/re-developed after the upgrade.
         In the QAS or PRD systems, ensure that all SAP BW development transports have been imported prior to the upgrade.
         BW
    Implement BI 7.0 Business Explorer Frontend     Install, evaluate, test and distribute the new BI 7.0 Business Explorer Frontend.
         Basis/BW
    Pre-upgrade Process:
    Download required BI 7.0 support package Stack for inclusion in the upgrade     Determine the equivalent support package level of the source SAP BW release and the target SAP BW release.
         There is a minimum requirement that you upgrade to at least the equivalent support package level on the target SAP BW release so that you do not lose functionality, corrections, and data.
         It is recommended to upgrade to the latest version of all support packages during the upgrade via the upgradeu2019s support package binding functionality.
         BI 7.0 Support Packages are delivered via SAP NetWeaver u201904 Support Package stacks (SP-Stacks). It is not recommended to partially apply some of the SP-Stacksu2019 individual support packages. You should apply all of the SP-Stacks support packages at once.
    For more information on the SP-Stacks and SAP NetWeaver SP-Stacks, please see the SAP service marketplace alias SP-Stacks (http://service.sap.com/sp-stacks)
         You should also review, download, and bind in support packages for all add-on components that are installed on SAP BW and will be upgraded during the SAP BW upgrade (e.g. SEM-BW, ST-PI, etc)
         Basis
    Apply latest Support Package tool patch     Apply latest SPAM patch before executing PREPARE     Basis
    Validate the SAP BW (ABAP) Data Dictionary and the Database Data Dictionary for consistency     Check Database consistency
         Transaction DB02:
    o     Execute ABAP SAP_UPDATE_DBDIFF and re-execute DB02 check. This gives a truer view of the SAP BW objects in DB02.
    o     Check missing database objects (indices, tables, etc)
    o     Missing indices may identify erred data loads or process problems
    Tip: Missing indices on InfoCubes can be restored by RSRV or ABAP SAP_INFOCUBE_INDEXES_REPAIR
    Note: check for running data loads before executing a repair!
    o     Check DDIC/DB consistency
         Verify database objects and consistency
    (e.g. SAPDBA check for offline data files)
         BW
    Remove unnecessary SAP BW temporary database objects     Delete all SAP BW temporary database objects:
         Execute routine housekeeping ABAP SAP_DROP_TMPTABLES.
         This reduces the numbers of database objects that need to be copied during the upgrade.
         Note: take care not to delete objects that are in use as this will cause queries, compressions, etc to terminate.
         BW
    Validate your SAP BW Objects for correctness prior to your upgrade     Using the SAP BW Analysis Tool (transaction RSRV), perform extensive tests on all important SAP BW Objects to ensure their correctness prior to the upgrade.
    Note: this test should be repeatable so you can re-validate after the upgrade!
         Ensure that any inconsistencies are identified and corrected
         RSRV has a number of extensive tests and if all checks are executed will consume a large amount of time. Multiple tests can be performed in parallel.
         Tip: Some corrections in development can be deployed to other systems via transport in advance of the next upgrade.
         BW
    Ensure DB Statistics are up to date prior to the upgrade          Check DB statistics for all tables.
    Tables without statistics, especially system tables, can seriously impact upgrade runtimes.
         Check DB statistics for missing Indexes for InfoCubes and Aggregates
    o     User transaction RSRV to check      BW
    Check SAP BW Support Package status     Check the status of all support packages (via transaction SPAM)
         Ensure the Support Package queue is empty
         Confirm all applied Support Packages     Basis
    Check all u2018Repairsu2019     Check for unreleased repair transports
         Release all unreleased transports
    In your QAS and PRD system, check if all repair transports have been imported (i.e. systems are aligned)
         Import missing repair transports into down stream systems. This will avoid differing message and/or errors during the upgrade.
         BW
    Check InfoObject status          Check for revised (modified) InfoObjects that have not been activated.
    All InfoObjects should be active or saved (not activate):
    o     Check all inactive InfoObjects:
    Transaction RSD1 (Edit InfoObjects),
    click on u201CAll InfoObjectsu201D radio button and click the u201CDisplayu201D button.
    Modified InfoObjects are denoted by yellow triangles!
    o     Determine if revision should be activated or removed.
         'Reorgu2019 or u2018Repairu2019 all InfoObjects
    This checks and repairs any discrepancies in the InfoObject definition and structures. It is common to have obsolete DDIC and table entries for InfoObjects after multiple upgrades and definition changes. These obsolete entries normally do not effect normal SAP BW operations.
         Transaction RSD1 (Edit InfoObjects), Select u201CExecute Repairu201D or u201CExecute Reorgu201D Use expert mode for selective executions.
         BW
    All ODS data loads must be activated.          Activate all inactivated ODS Object requests.
    All ODS u2018Mu2019 tables must be emptied prior to the upgrade as a new activate process is implemented
    o     Inactivated ODS request can be located via the Admin workbench -> u2018Monitoringu201D button -> u2018ODS Status Overviewu201D
         BW
    All Transfer and Update rules should be active          Check for inactive Update and Transfer Rules
    o     All update rules and transfer rules should be active or deleted.
    o     Look into the table RSUPDINFO for update rules and search for the version "not equal" to "A". Likewise use the table RSTS for Transfer rules/structure.     BW
    All InfoCubes should be active          Check for inactive InfoCubes and Aggregates (Aggregates are InfoCubes too!)
    o     All InfoCubes should be activated or deleted.
    o     Execute ABAP RSUPGRCHECK to locate any inactive InfoCubes. See SAP note 449160.
         BW
    All Web Report objects should be consistent prior the upgrade.          Check the consistency of your SAP BW web objects (web reports, web templates, URLs, roles, etc). All objects should be consistent prior to web object conversion after the upgrade. It is recommended to ensure consistency before the upgrade.
    o     For Original release SAP BW 3.x:
    A SAP BW web reporting objects check can be executed via a new check in RSRV. This is provided via a SAP BW support package.
    Please see SAP note 484519 for details.
         BW
    Backup your system before starting PREPARE     Before execution PREPARE, perform a full database backup (including File system). Ensure you can recover to the point in time before PREPARE was executed.
         Database admin
    Address any instructions/errors generated by PREPARE          Address any issues listed in log files Checks. Log generated by PREPARE.
    o     Repeat PREPARE until all checks are successful.     Basis
    Complete any Logistic V3 data extractions and suspend V3 collection processes          Extract and empty Logistics V3 extractor queues on SAP R/3 source systems.
    o     The V3 extraction delta queues must be emptied prior to the upgrade to avoid any possible data loss. V3 collector jobs should be suspended for the duration of the upgrade.
    They can be rescheduled after re-activation of the source systems upon completion of the upgrade.
         Note: If you perform any data loads after executing PREPARE, re-check the status of all delta queues in SAP BW and the source systems(s).
         BW
    Complete any data mart data extractions and suspend any data mart extractors          Load and Empty all Data mart Delta Queues in SAP BW. (e.g. for all export DataSources)
    o     The SAP BW Service SAPI, which is used for internal and u2018BW to BWu2019 data mart extraction, is upgraded during the SAP BW upgrade. Therefore, the delta queues must be emptied prior to the upgrade to avoid any possibility of data loss.
         Note: If you perform any data loads after executing PREPARE, re-check the status of all delta queues in SAP BW and the source systems(s).
         BW
    Check that your customer defined data class definitions conform to SAP standards          Check all customer created Data classes used by SAP BW Objects (i.e. InfoCubes, ODS Objects, Aggregates, InfoObjects, and PSAs) to ensure they conform to SAP standards.
    o     Check your data class definitions as detailed in SAP Notes 46272 and 500252.
    o     Incorrect data classes could create activation errors during the upgrade.
         BW
    Remove unnecessary SAP BW temporary database objects     Delete all SAP BW temporary database objects:
         Execute routine housekeeping ABAP SAP_DROP_TMPTABLES.
    For more information see SAP note 308533 (2.x) and 449891 (3.x).
         This reduces the numbers of database objects that need to be copied during the upgrade.
         Note: take care not to delete objects that are in use as this will cause queries, compressions, etc to terminate.
         Basis/BW
    Backups!     Before executing the upgrade, ensure that you have a backup strategy in place so you can return to the point where loading was completed and the upgrade started.
    Ensuring you can return to a consistent point in time (without having to handle rollback or repeats of data loads) is key to having a successful fallback plan.
         Database Admin
    Before Execution:
    All SAP BW administration tasks should have ceased          Cease all SAP BW administration tasks such as Object maintenance, query/web template maintenance, data loads, transports, etc at the beginning of the upgrade.
    The Administrators Workbench and the Data Dictionary are locked in the early phases of the upgrade.
         Reminder: Users can execute queries until the time that the upgrade determines that the SAP BW System should be closed*
    - timing depends on the type of upgrade selected
         Basis/Admin
    Remove unnecessary SAP BW temporary database objects     Repeat the deletion of all SAP BW temporary database objects after you have stopped using the SAP BW Admin workbench*
         Execute routine housekeeping ABAP SAP_DROP_TMPTABLES.
    For more information see SAP note 308533 (2.x) and 449891 (3.x).
    - timing depends on the type of upgrade selected
         BW
    Check system parameters     Check OS, DB, and Instance profile parameters.
         Check System Instance parameters for new BI 7.0 specific parameters. See SAP note 192658 for details
         Check for any DB specific parameters for BI 7.0
         Check for any new OS parameters     Basis
    Check Database archiving mode     Turn database archive log mode back on if it was disabled during the upgrade!
         Database Admin
    After Execution:
    Check the systemu2019s installation consistency     Execute Transaction SICK to check installation consistency
         BW
    Check the system logs     Perform a technical systems check.
         Example: Check system and all dispatcher logs (inc. ICM logs)
         Basis
    Apply latest executable binaries     Apply the latest 6.40 Basis Kernel for all executables
         Tip: use the SAP NetWeaver u201904 SP-Stack selection tool to find all binaries. (http://service.sap.com/swdc)
         Basis
    Review BI 7.0 Support Packages for follow-up actions.          Review SAP Notes for all SAP BW Support packages applied during (bound into the upgrade) and applied after the upgrade:
    o      Search for Note with the keyword u201CBWu201D, u201CSAPBWNEWSu201D, and u201C<BW release>u201D
    o     Follow any required instructions identified in the SAP Notes
         Basis
    Apply latest patches          Apply the latest SPAM patch
         Apply any required support packages that were not bound into the upgrade.
         Basis
    Apply additional BI 7.0 Support Packages
    (if required)          SAP recommends that customer remain current on SAP Support Packages.
         Review SAP Notes for all SAP BW Support packages applied in previous task.
    o      Search for Notes with the keyword u201CBWu201D, u201CSAPBWNEWSu201D, and u201C<BW release>u201D
    o     Follow any required instructions identified in the SAP Notes
         Basis
    Resolve any modified SAP delivered Role issues      If SAP delivered Roles were modified, then these modifications may incorrectly appear in the upgrade modification adjustment tool (SPAU).
         Review and implement SAP note 569128 as required     Basis
    Configuring Information Broadcasting EP/KMC Connections
         If you plan to use the EP integration functionality of Information broadcasting (Broadcast to the EPu2019s PCD, Broadcast to KMC, or Broadcast to Collaboration Rooms):
         Ensure the SAP EP is at the same SP-Stack level as your SAP BW system.
         Follow the online help documentation to configure and connect the SAP BW system and the SAP EP system. (http://help.sap.com).
         For broadcasting to KMC, ensure that KM has the u2018BEx Portfoliou2019 content available.
         Basis
    Re-check SAP BW Object and consistency     Execute RSRV to check SAP BW Object consistency
         Repeat tests that we executed prior to the upgrade.
         Validate results      BW
    Check InfoCube views for consistency     Check consistency of InfoCube fact table views
         It is possible that fact table view /BIC/V<InfoCube>F is missing if a number of SAP BW upgrades have been performed before. See SAP Note 525988 for instructions for the check and repair program.
         BW
    Perform SAP BW Plug-in (SAPI) upgrade follow-up tasks          If required, Re-activate the SAP BW u201CMyselfu201D source system in SAP BW.
         The SAP BW internal plug-in (SAPI), which is used for internal data mart extraction and u2018BW to BWu2019 communication, is upgraded during the SAP BW upgrade. The source system is de-activated to prevent extractions and loading during the upgrade.
         It may be required to replicate export DataSources and reactivate transfer structures/rules for internal data loads (i.e. ODS Object to InfoCube objects).
    o     Tip: It is advised to do this step for all export DataSources to avoid possible errors during execution of InfoPackages
         Check that all other Source Systems are active.
    o     Activate as required.     Basis/BW
    Check SAP BW Personalization is implemented     (SAP BW 2.X upgrades will have performed this in the previous task).
    Validate that personalization has been activated in your SAP BW system.
    Note: It has been observed that in some cases, BEx Personalization has to be re-activated after an upgrade from SAP BW 3.x to BI 7.0. It is advised to check the status of personalization after the upgrade.
         Enter the IMG (transaction SPRO), select SAP Business Warehouse -> Reporting relevant settings -> General Reporting Settings -> Activate Personalization in BEx
    Check the status of the Personalization settings. All entries should be active u2013 highlighted by an unchecked check box.
         To activate highlighted Personalization, click Execute.     BW
    For SAP BW 2.0B/2.1C -> BI 7.0 Upgrades:
    Convert ODS secondary indexes to new standard     For SAP BW 2.0B/2.1C -> BI 7.0 Upgrades:
    Convert any customer created ODS Object secondary indexes to the new ODS Object index maintenance process.
         Re-create all indexes in the ODS Object definition screen in transaction RSA1.
         ODS indexes must conform to the new naming convention
         BW
    Converting IGS chart settings
         Convert you existing IGS chart settings (converts IGS chart settings from BLOB to new XML storage format)
         Ensure you have the latest SAP Web AS 6.40 IGS (stand alone windows version) installed and working
    o      Test via transaction RSRT
         Execute the conversion process as directed the BI 7.0 upgrade guide.
         Note: This step is required for all BI 7.0 upgrades     Basis
    Backup your SAP BW system     Perform a full database backup (including the File system)
    Remember to adjust your backup scripts to include new components such as the J2EE engine, pre-calculation service, etc.
         Database Admin

  • Alpha non conforming value

    hi gurus,
                   This ramesh.  Please telme anybody HOW DO WE GET ALPHA NON CONFORMING VALUE (ERROR)?  WHAT IT MEANS?

    HI
    You may not have alpha routine exists in transfer rules,please check your transfer rules for your data source,where you getting this error...in transfer rules you will get it in reght side of the left pane..please check against your info object..
    and also,Please check alpha conversion has been done or not for this object..you can run it in transaction 'RSMDCNVEXIT'
    Hope it helps
    Thanks
    Teja

  • Is there any Table to display all Tcodes used in BW

    Hi
      Is there  any Table available where all Tcode can be seen.
    Thanks,
    Jaswantha

    hi,
    these are the tcodes in bw..
    RS00 Start menu
    RS12 Overview of master data locks
    RSA0 Content Settings Maintenance
    RSA1 BW Administrator Workbench
    RSA10 Realtime Test Interface Srce System
    RSA11 Calling up AWB with the IC tree
    RSA12 Calling up AWB with the IS tree
    RSA13 Calling up AWB with the LG tree
    RSA14 Calling up AWB with the IO tree
    RSA15 Calling up AWB with the ODS tree
    RSA1OLD BW Administrator Workbench (old)
    RSA2 OLTP Metadata Repository
    RSA3 Extractor Checker
    RSA5 Install Business Content
    RSA6 Maintain DataSources
    RSA7 BW Delta Queue Monitor
    RSA8 DataSource Repository
    RSA9 Transfer Application Components
    RSADMIN RSADMIN maintenance
    RSADRTC70TOADR11 Conversion of table TC70 in ADR11
    RSANWB Model the Analysis Process
    RSANWB_CRM_ATTR Fill CRM Attributes
    RSANWB_EXEC Execute Analysis Process
    RSANWB_IMP Calculation of Importance
    RSANWB_START_ALL Model the Analysis Process
    RSANWB_SURVEY Analysis Process: Create Target Grp
    RSAN_CLTV CLTV Modeling
    RSAN_CLTV1 CLTV
    RSAN_RESP Response Prediction Models
    RSAN_RFM RFM Modeling
    RSAN_SALES_PL_CALL Execute Sales Planning
    RSAN_SURV_SHOW BW Survey
    RSAN_SURV_TG BW Survey: Target Group Management
    RSAN_VERI Analysis Process: Test Monitor
    RSAN_WB_TST IMC Wrapper Transaction for Testing
    RSARCH_ADMIN BW Archive Administration
    RSARFCEX Variant for RSARFCEX
    RSASSIBTCH Schedule Assistant in Background
    RSATTR Attribute/Hierarchy Realignment Run
    RSAWB New AWB
    RSAWBSETTINGSDEL Delete user settings of the AWB
    RSB0 Maintain OLAP authorization object
    RSB1 Display authorization object
    RSB2 Data Marts Generation Center
    RSBBS Maintaining BW Sender-Receiver
    RSBBS_WEB Transaction for the RRI in the Web
    RSBCTMA_AC xCBL Action Codes
    RSBCTMA_DT Mapping of Ext./Int. Document Type
    RSBEB Business Explorer Browser
    RSBMO2 Open Hub Monitor
    RSBO Open Hub Maintenance
    RSBOH1 Open Hub Maintenance
    RSBOH2 Open Hub Maintenance
    RSBOH3 Open Hub Maintenance
    RSBO_EXTRACT Auth Check Open Hub Extraction
    RSBROWSER BW Browser
    RSBWREMOTE Create Warehouse User
    RSCATTAWB CATT Admin. Workbench
    RSCDS Summarization routine
    RSCONCHA Channel conversion
    RSCONFAV Favorites Conversion
    RSCRMDEBUG Set Debug Options
    RSCRMISQ Regis. of Infosets for Target Groups
    RSCRMMDX Edit MDX
    RSCRMMON Monitor Query Extracts
    RSCRMSCEN Regist. Closed-Loop Scenarios
    RSCRM_BAPI Test Program for RSCRM Interface
    RSCRM_REPORT BW Queries with ODBO (to 2nd 0B)
    RSCRT BW Monitor (Near)-Real-Time Loading
    RSCR_MAINT_PUBLISH Maint. of Publishing Variables CR/CE
    RSCR_MAINT_URL Maint. of URL Variables for CR/CE
    RSCUSTA Maintain BW Settings
    RSCUSTA2 ODS Settings
    RSCUSTV1 BW Customizing - View 1
    RSCUSTV10 BW Customizing - View 10
    RSCUSTV11 BW Customizing - View 11
    RSCUSTV12 Microsoft Analysis Services
    RSCUSTV13 RRI Settings for Web Reporting
    RSCUSTV14 OLAP: Cache Parameters
    RSCUSTV15 BW Customizing - View 11
    RSCUSTV16 BW Reporting
    RSCUSTV17 Settings: Currency Translation
    RSCUSTV18 DB Connect Settings
    RSCUSTV19 InfoSet Settings
    RSCUSTV2 BW Customizing - View 2
    RSCUSTV3 BW Customizing - View 3
    RSCUSTV4 BW Customizing - View 4
    RSCUSTV5 BW Customizing - View 5
    RSCUSTV6 BW Customizing - View 6
    RSCUSTV7 BW Customizing - View 7
    RSCUSTV8 BW Customizing - View 8
    RSCUSTV9 BW Customizing - View 9
    RSD1 Characteristic maintenance
    RSD2 Maintenance of key figures
    RSD3 Maintenance of units
    RSD4 Maintenance of time characteristics
    RSD5 Internal: Maint. of Techn. Chars
    RSDBC DB connect
    RSDB_ADD_ID_2_CRM Create External ID for CRM-GP
    RSDB_INIT Initial Download of D&B Data
    RSDCUBE Start: InfoCube editing
    RSDCUBED Start: InfoCube editing
    RSDCUBEM Start: InfoCube editing
    RSDDV Maintaining Aggregates
    RSDIOBC Start: InfoObject catalog editing
    RSDIOBCD Start: InfoObject catalog editing
    RSDIOBCM Start: InfoObject catalog editing
    RSDL DB Connect - Test Program
    RSDMD Master Data Maintenance w.Prev. Sel.
    RSDMD_TEST Master Data Test
    RSDMPRO Initial Screen: MultiProvider Proc.
    RSDMPROD Initial Screen: MultiProvider Proc.
    RSDMPROM Initial Screen: MultiProvider Proc.
    RSDMWB Data Mining Workbench
    RSDODS Initial Screen: ODS Object Processng
    RSDODSD Initial Screen: ODS Proces. (Deliv.)
    RSDPMDDBSETUP Creates a MOLAP Database in MSAS
    RSDPMOLAPDS MOLAP DataSource creation
    RSDPRFCDSETUP Create MOLAP Rfc Tests
    RSDSD DataSource Documentation
    RSDU_SHOWTEMPINCTAB RSDU_SHOWTEMPINCTAB
    RSDV Validity Slice Maintenance
    RSD_ACAT Maintain InfoObject catalog
    RSEDIT Old editor
    RSEIDOCM Variant for RSEIDOCM
    RSENQ Display of Lock Log
    RSEOUT00 Variant for RSEOUT00
    RSFH Test Transaction Data Extractors
    RSFLAT Flat MDX
    RSFREQUPL Frequent upload from source systems
    RSGWLST Accessible Gateways
    RSH1 Edit hierarchy initial screen
    RSH3 Simulate hierarchies
    RSHIER Hierarchy maintenance w/o AdmWB
    RSHIERINT Hierarchy maintenance from AdmWB
    RSHIERSIM Simulate hierarchies
    RSICUBE Maintain/Change InfoCubes (Internal)
    RSIMG BW IMG
    RSIMPCUR Load Exchange Rates from File
    RSINPUT Manual Data Entry
    RSIR_DELTATRACK KPro Delta Tracking
    RSISET Maintain InfoSets
    RSKC Maintaining the Permittd Extra Chars
    RSLDAPSYNC_USER LDAP Synchronization of Users
    RSLGMP Maintain RSLOGSYSMAP
    RSMD Extractor Checker
    RSMDCNVEXIT Conversn to Consistent Intern. Vals
    RSMDEXITON Activate Conversion Routine
    RSMO Data Load Monitor Start
    RSMON BW Administrator Workbench
    RSMONCOLOR Traffic light color in the Monitor
    RSMONITOR_DB D&B Integration
    RSMONMAIL Mail Addresses for Monitor Assistant
    RSNPGTEST Test Network Plan Control
    RSNPGTEST2 Test Network Plan Control
    RSNSPACE BW Namespace Maintenance
    RSO2 Oltp Metadata Repository
    RSO3 Set Up Deltas for Master Data
    RSOCONTENT Administration of a Content System
    RSOCOPY Copy from TLOGO Objects
    RSODADMIN Administration BW Document Managemt.
    RSOR BW Metadata Repository
    RSORBCT BI Business Content Transfer
    RSORMDR BW Metadata Repository
    RSPC Process Chain Maintenance
    RSPC1 Process Chain Display
    RSPCM Monitor daily process chains
    RSPFPAR Display profile parameter
    RSQ02 Maintain InfoSets
    RSQ10 SAP Query: Role Administration
    RSQ11 InfoSet Query: Web reporting
    RSRAJ Starts a Reporting Agent Job
    RSRAM Reporting Agent Monitor
    RSRAPS Manages Page Store
    RSRCACHE OLAP: Cache Monitor
    RSRCATTTRACE Catt transaction for trace tool
    RSREP BW Administrator Workbench
    RSRFCCHK RFC destinations with logon data
    RSRHIERARCHYVIRT Maintain Virtual Time Hierarchies
    RSRQ Data Load Monitor for a Request
    RSRR_WEB Report-Report Interface in Web
    RSRT Start of the report monitor
    RSRT1 Start of the Report Monitor
    RSRT2 Start of the Report Monitor
    RSRTRACE Set trace configuration
    RSRTRACETEST Trace tool configuration
    RSRV Analysis and Repair of BW Objects
    RSRVALT Analysis of the BW objects
    RSR_TRACE Trace Monitor
    RSR_WEB_VARIABLES Variable Entry in Web
    RSSCD100_PFCG Change Docs for Role Administration
    RSSCD100_PFCG_USER for Role Assignment
    RSSCM_APPL Application settings SCM4.0 and BW
    RSSD Access for scheduler
    RSSE Selection start InfoCube
    RSSGPCLA Maintain program class
    RSSG_BROWSER Simple Data Browser
    RSSM Authorizations for Reporting
    RSSMQ Start Query with User
    RSSMTRACE Reporting Log Authorization
    RSSTARTMON Starting the monitor in parall.proc.
    RSSU53 Display authorization check BW
    RST22 Old Short-Dump Overview
    RSTB Choose Object Name
    RSTBHIST Table history
    RSTG_BUPA Target Group Sel. Business Partners
    RSTG_CUST Target Group Selection Customers
    RSTG_DB Target Group Selection D&B
    RSTG_DB_WEB Target Group Selection D&B
    RSTPRFC Create Destination for After-Import
    RSU0 Update rules overview
    RSU1 Create update rules
    RSU1I Create update rules
    RSU1O Create Update Rules
    RSU2 Change update rules
    RSU2I Change update rules
    RSU2O Change Update Rules
    RSU3 Display update rules
    RSU3I Display update rules
    RSU3O Display Update Rules
    RSU6 Delete update rules
    RSU6I Delete update rules
    RSU6O Delete update rules
    RSU7 Data Extraction: Maintain Parameters
    RSUSR003 Check standard user passwords
    RSUSR200 List of Users per Login Date
    RSWELOGD Delete Event Trace
    RSWEWWDHMSHOW Display Background Job SWWERRE
    RSWEWWDHSHOW Display Work Item Deadline Monitorng
    RSWWCLEAR Execute Work Item Clearing Work
    RSWWCOND Execute Work Item Rule Monitoring
    RSWWDHEX ExecuteWorkItemDeadlineMonitoring
    RSWWERRE Start RSWWERRE
    RSZC Copying Queries between InfoCubes
    RSZDELETE Deletion of query objects
    RSZT Get Test Component
    RSZTESTFB Shortcut Function Test Environment
    RSZV Call up of view V_RSZGLOBV
    RSZVERSION Set frontend version
    RS_AWB_REMOTE Remote AWB Staging
    RS_BCT_BWBEOTYP Maintain BW Backend Object Types
    RS_DS_CHECK Check consistency request
    RS_ISTD_REMOTE Maintain InfoSource
    RS_LOGSYS_CHECK Source System Tool
    RS_PERS_ACTIVATE Activation of BEx Personalization
    RS_PERS_BOD_ACTIVATE Activate BEx Open Pers.
    RS_PERS_BOD_DEACTIVA Deactivate Pers. for BEx Open
    RS_PERS_VAR_ACTIVATE Activate Variable Pers.
    RS_PERS_VAR_DEACTIVA Deactivate Pers. for Variables
    RS_PERS_WTE_ACTIVATE Activate Web Template Pers.
    RS_PERS_WTE_DEACTIVA Deactivate Pers. for Web Template
    SP01 Spool

  • BW Upgrade  from 3.5 to version 7 - RSRV check fails in conversion exists

    Hi All,
    We are in the process of doing preupgrade checks for version 3.5 and for infoobject 0MATL_GROUP (material group)  RSRV checks fails and throughing  conversion exit issue for some SID's ,
    Error Message:
    Check values of characteristic 0MATL_GROUP for conversion exit
    There are 41 values with the wrong internal format in the SID table
    The first 10 errors are:
    Value in SID table 4350/ correct value 000004350/ SID in SID table 2732
    Value in SID table 10000000/ correct value 010000000/ SID in SID table 2716
    Value in SID table 12000000/ correct value 012000000/ SID in SID table 2717
    etc...
    I just want to check do we need to fix this error before doing the actual basis upgrade 7.0 tasks orelse is it  OK to do upgrade without fixing this error .
    Pls advice is there is any way to fix this issue in system without deleting the above SID's in the system.
    Is this error will create major issues afterupgrade to 7 without fixing this SID issues in 3.5  - Pls adivce us.
    With regards,
    Hari

    Hi Hari,
    From the error message it seems that you had data loaded to 0MATL_GROUP before the EXIT (I guess it is an ALPHA exit)
    was switched on. Now the system find values that are not ALPHA converted with the RSRV check. You should correct this
    problem before doing the upgrade. It should be possible to do the ALPHA conversion using the transaction RSMDCNVEXIT.
    The reason for doing the ALPHA conversion before the upgrade is that transaction RSMDCNVEXIT is no longer available in BI
    7.0, Since some objects of the new data flow in BI 7.0 ( for example BIA) are not covered by RSMDCNVEXIT it has been set to obsolete.       
    Customers cannot  use transaction RSMDCNVEXIT anymore in release BI 7.0.
    Best Regards,
    Des.

  • More details for master data

    Hi friends,
    I want to know more details about the master data, when there is one cube or dso, how can I find out that master data objects in that?
    When right click on master data info object and display, there is tabs called u2018general, business explorer, master data/texts, hierarchy, attribute and compoundingu2019, want to know much details on each tab and option in that.
    I know some thing about these options, but want to know all options. This is basic question, but wants to know detaily from experts. Please give more details on this. Thanks in advance.
    Suji.

    there are 6 tabs in master data datasource
    1. general tab, 2. Business explorer 3. master data/text 4. Hirarchy 5. attribute 6. Compounding
    General:
    in this there are 4 options
    1.  dictionary : give data type of that object, give length of the object, convertion rotiune is alpha which makes
    "ALPHA conversion", is a transaction (transaction code RSMDCNVEXIT) that checks the format of all values of characteristics that use one of the conversion routines ALPHA, GJAHR and NUMCV. If values are found that do not have the correct internal format it can replace them by correct value and update all dependant SAP NetWeaver BI objects (like InfoCubes, Hierarchies, master data of other characteristics...).
    The most important conversion routine - due to its common use - is the ALPHA routine that converts purely numeric user input like '4711' into '004711' (assuming that the characteristic value is 6 characters long). If a value is not purely numeric like '4711A' it is left unchanged.
    transfer routine : when u want to write the routine use the create buttom.
    Business explorer:
    use authorization relevant check box when you want the object as authorization and use in report based on user requirement.
    Master data/text:
    it shows the object has attr or text or both, you can find by identifing the check box
    Hirarchy:
    if the check box of with hierarchy is checked then it has hierarchy. 
    Attributes:
    it shows the attributes of the attributes.
    compounding:
    In Compounding, A Field or another Object is attached to an Info Object. A Compounding Characteristic is when object's definition is incomplete without the definition of another Characteristic Info Object.
    We can also determine whether we want to compound the characteristic to other InfoObjects. Sometimes we need to compound InfoObjects in order to map the data model. Some InfoObjects cannot be defined uniquely without compounding.
    For Example the Info Object - Location (0PP_LOCAT) has to be assigned with a Compound Info Object - Plant (0PLANT).
    By using compound InfoObjects, you can model the dependencies between InfoObjects. You can compound InfoObjects to map the data structure of a source system.

  • Table name where I can view all Tcode of SAP

    Hi All,
    Please let me know the table name where all SAP transaction codes will be present.
    Thanks in advance.

    hi,
    in SE16..display tables TSTC and TSTCT
    RS00 Start menu
    RS12 Overview of master data locks
    RSA0 Content Settings Maintenance
    RSA1 BW Administrator Workbench
    RSA10 Realtime Test Interface Srce System
    RSA11 Calling up AWB with the IC tree
    RSA12 Calling up AWB with the IS tree
    RSA13 Calling up AWB with the LG tree
    RSA14 Calling up AWB with the IO tree
    RSA15 Calling up AWB with the ODS tree
    RSA1OLD BW Administrator Workbench (old)
    RSA2 OLTP Metadata Repository
    RSA3 Extractor Checker
    RSA5 Install Business Content
    RSA6 Maintain DataSources
    RSA7 BW Delta Queue Monitor
    RSA8 DataSource Repository
    RSA9 Transfer Application Components
    RSADMIN RSADMIN maintenance
    RSADRTC70TOADR11 Conversion of table TC70 in ADR11
    RSANWB Model the Analysis Process
    RSANWB_CRM_ATTR Fill CRM Attributes
    RSANWB_EXEC Execute Analysis Process
    RSANWB_IMP Calculation of Importance
    RSANWB_START_ALL Model the Analysis Process
    RSANWB_SURVEY Analysis Process: Create Target Grp
    RSAN_CLTV CLTV Modeling
    RSAN_CLTV1 CLTV
    RSAN_RESP Response Prediction Models
    RSAN_RFM RFM Modeling
    RSAN_SALES_PL_CALL Execute Sales Planning
    RSAN_SURV_SHOW BW Survey
    RSAN_SURV_TG BW Survey: Target Group Management
    RSAN_VERI Analysis Process: Test Monitor
    RSAN_WB_TST IMC Wrapper Transaction for Testing
    RSARCH_ADMIN BW Archive Administration
    RSARFCEX Variant for RSARFCEX
    RSASSIBTCH Schedule Assistant in Background
    RSATTR Attribute/Hierarchy Realignment Run
    RSAWB New AWB
    RSAWBSETTINGSDEL Delete user settings of the AWB
    RSB0 Maintain OLAP authorization object
    RSB1 Display authorization object
    RSB2 Data Marts Generation Center
    RSBBS Maintaining BW Sender-Receiver
    RSBBS_WEB Transaction for the RRI in the Web
    RSBCTMA_AC xCBL Action Codes
    RSBCTMA_DT Mapping of Ext./Int. Document Type
    RSBEB Business Explorer Browser
    RSBMO2 Open Hub Monitor
    RSBO Open Hub Maintenance
    RSBOH1 Open Hub Maintenance
    RSBOH2 Open Hub Maintenance
    RSBOH3 Open Hub Maintenance
    RSBO_EXTRACT Auth Check Open Hub Extraction
    RSBROWSER BW Browser
    RSBWREMOTE Create Warehouse User
    RSCATTAWB CATT Admin. Workbench
    RSCDS Summarization routine
    RSCONCHA Channel conversion
    RSCONFAV Favorites Conversion
    RSCRMDEBUG Set Debug Options
    RSCRMISQ Regis. of Infosets for Target Groups
    RSCRMMDX Edit MDX
    RSCRMMON Monitor Query Extracts
    RSCRMSCEN Regist. Closed-Loop Scenarios
    RSCRM_BAPI Test Program for RSCRM Interface
    RSCRM_REPORT BW Queries with ODBO (to 2nd 0B)
    RSCRT BW Monitor (Near)-Real-Time Loading
    RSCR_MAINT_PUBLISH Maint. of Publishing Variables CR/CE
    RSCR_MAINT_URL Maint. of URL Variables for CR/CE
    RSCUSTA Maintain BW Settings
    RSCUSTA2 ODS Settings
    RSCUSTV1 BW Customizing - View 1
    RSCUSTV10 BW Customizing - View 10
    RSCUSTV11 BW Customizing - View 11
    RSCUSTV12 Microsoft Analysis Services
    RSCUSTV13 RRI Settings for Web Reporting
    RSCUSTV14 OLAP: Cache Parameters
    RSCUSTV15 BW Customizing - View 11
    RSCUSTV16 BW Reporting
    RSCUSTV17 Settings: Currency Translation
    RSCUSTV18 DB Connect Settings
    RSCUSTV19 InfoSet Settings
    RSCUSTV2 BW Customizing - View 2
    RSCUSTV3 BW Customizing - View 3
    RSCUSTV4 BW Customizing - View 4
    RSCUSTV5 BW Customizing - View 5
    RSCUSTV6 BW Customizing - View 6
    RSCUSTV7 BW Customizing - View 7
    RSCUSTV8 BW Customizing - View 8
    RSCUSTV9 BW Customizing - View 9
    RSD1 Characteristic maintenance
    RSD2 Maintenance of key figures
    RSD3 Maintenance of units
    RSD4 Maintenance of time characteristics
    RSD5 Internal: Maint. of Techn. Chars
    RSDBC DB connect
    RSDB_ADD_ID_2_CRM Create External ID for CRM-GP
    RSDB_INIT Initial Download of D&B Data
    RSDCUBE Start: InfoCube editing
    RSDCUBED Start: InfoCube editing
    RSDCUBEM Start: InfoCube editing
    RSDDV Maintaining Aggregates
    RSDIOBC Start: InfoObject catalog editing
    RSDIOBCD Start: InfoObject catalog editing
    RSDIOBCM Start: InfoObject catalog editing
    RSDL DB Connect - Test Program
    RSDMD Master Data Maintenance w.Prev. Sel.
    RSDMD_TEST Master Data Test
    RSDMPRO Initial Screen: MultiProvider Proc.
    RSDMPROD Initial Screen: MultiProvider Proc.
    RSDMPROM Initial Screen: MultiProvider Proc.
    RSDMWB Data Mining Workbench
    RSDODS Initial Screen: ODS Object Processng
    RSDODSD Initial Screen: ODS Proces. (Deliv.)
    RSDPMDDBSETUP Creates a MOLAP Database in MSAS
    RSDPMOLAPDS MOLAP DataSource creation
    RSDPRFCDSETUP Create MOLAP Rfc Tests
    RSDSD DataSource Documentation
    RSDU_SHOWTEMPINCTAB RSDU_SHOWTEMPINCTAB
    RSDV Validity Slice Maintenance
    RSD_ACAT Maintain InfoObject catalog
    RSEDIT Old editor
    RSEIDOCM Variant for RSEIDOCM
    RSENQ Display of Lock Log
    RSEOUT00 Variant for RSEOUT00
    RSFH Test Transaction Data Extractors
    RSFLAT Flat MDX
    RSFREQUPL Frequent upload from source systems
    RSGWLST Accessible Gateways
    RSH1 Edit hierarchy initial screen
    RSH3 Simulate hierarchies
    RSHIER Hierarchy maintenance w/o AdmWB
    RSHIERINT Hierarchy maintenance from AdmWB
    RSHIERSIM Simulate hierarchies
    RSICUBE Maintain/Change InfoCubes (Internal)
    RSIMG BW IMG
    RSIMPCUR Load Exchange Rates from File
    RSINPUT Manual Data Entry
    RSIR_DELTATRACK KPro Delta Tracking
    RSISET Maintain InfoSets
    RSKC Maintaining the Permittd Extra Chars
    RSLDAPSYNC_USER LDAP Synchronization of Users
    RSLGMP Maintain RSLOGSYSMAP
    RSMD Extractor Checker
    RSMDCNVEXIT Conversn to Consistent Intern. Vals
    RSMDEXITON Activate Conversion Routine
    RSMO Data Load Monitor Start
    RSMON BW Administrator Workbench
    RSMONCOLOR Traffic light color in the Monitor
    RSMONITOR_DB D&B Integration
    RSMONMAIL Mail Addresses for Monitor Assistant
    RSNPGTEST Test Network Plan Control
    RSNPGTEST2 Test Network Plan Control
    RSNSPACE BW Namespace Maintenance
    RSO2 Oltp Metadata Repository
    RSO3 Set Up Deltas for Master Data
    RSOCONTENT Administration of a Content System
    RSOCOPY Copy from TLOGO Objects
    RSODADMIN Administration BW Document Managemt.
    RSOR BW Metadata Repository
    RSORBCT BI Business Content Transfer
    RSORMDR BW Metadata Repository
    RSPC Process Chain Maintenance
    RSPC1 Process Chain Display
    RSPCM Monitor daily process chains
    RSPFPAR Display profile parameter
    RSQ02 Maintain InfoSets
    RSQ10 SAP Query: Role Administration
    RSQ11 InfoSet Query: Web reporting
    RSRAJ Starts a Reporting Agent Job
    RSRAM Reporting Agent Monitor
    RSRAPS Manages Page Store
    RSRCACHE OLAP: Cache Monitor
    RSRCATTTRACE Catt transaction for trace tool
    RSREP BW Administrator Workbench
    RSRFCCHK RFC destinations with logon data
    RSRHIERARCHYVIRT Maintain Virtual Time Hierarchies
    RSRQ Data Load Monitor for a Request
    RSRR_WEB Report-Report Interface in Web
    RSRT Start of the report monitor
    RSRT1 Start of the Report Monitor
    RSRT2 Start of the Report Monitor
    RSRTRACE Set trace configuration
    RSRTRACETEST Trace tool configuration
    RSRV Analysis and Repair of BW Objects
    RSRVALT Analysis of the BW objects
    RSR_TRACE Trace Monitor
    RSR_WEB_VARIABLES Variable Entry in Web
    RSSCD100_PFCG Change Docs for Role Administration
    RSSCD100_PFCG_USER for Role Assignment
    RSSCM_APPL Application settings SCM4.0 and BW
    RSSD Access for scheduler
    RSSE Selection start InfoCube
    RSSGPCLA Maintain program class
    RSSG_BROWSER Simple Data Browser
    RSSM Authorizations for Reporting
    RSSMQ Start Query with User
    RSSMTRACE Reporting Log Authorization
    RSSTARTMON Starting the monitor in parall.proc.
    RSSU53 Display authorization check BW
    RST22 Old Short-Dump Overview
    RSTB Choose Object Name
    RSTBHIST Table history
    RSTG_BUPA Target Group Sel. Business Partners
    RSTG_CUST Target Group Selection Customers
    RSTG_DB Target Group Selection D&B
    RSTG_DB_WEB Target Group Selection D&B
    RSTPRFC Create Destination for After-Import
    RSU0 Update rules overview
    RSU1 Create update rules
    RSU1I Create update rules
    RSU1O Create Update Rules
    RSU2 Change update rules
    RSU2I Change update rules
    RSU2O Change Update Rules
    RSU3 Display update rules
    RSU3I Display update rules
    RSU3O Display Update Rules
    RSU6 Delete update rules
    RSU6I Delete update rules
    RSU6O Delete update rules
    RSU7 Data Extraction: Maintain Parameters
    RSUSR003 Check standard user passwords
    RSUSR200 List of Users per Login Date
    RSWELOGD Delete Event Trace
    RSWEWWDHMSHOW Display Background Job SWWERRE
    RSWEWWDHSHOW Display Work Item Deadline Monitorng
    RSWWCLEAR Execute Work Item Clearing Work
    RSWWCOND Execute Work Item Rule Monitoring
    RSWWDHEX ExecuteWorkItemDeadlineMonitoring
    RSWWERRE Start RSWWERRE
    RSZC Copying Queries between InfoCubes
    RSZDELETE Deletion of query objects
    RSZT Get Test Component
    RSZTESTFB Shortcut Function Test Environment
    RSZV Call up of view V_RSZGLOBV
    RSZVERSION Set frontend version
    RS_AWB_REMOTE Remote AWB Staging
    RS_BCT_BWBEOTYP Maintain BW Backend Object Types
    RS_DS_CHECK Check consistency request
    RS_ISTD_REMOTE Maintain InfoSource
    RS_LOGSYS_CHECK Source System Tool
    RS_PERS_ACTIVATE Activation of BEx Personalization
    RS_PERS_BOD_ACTIVATE Activate BEx Open Pers.
    RS_PERS_BOD_DEACTIVA Deactivate Pers. for BEx Open
    RS_PERS_VAR_ACTIVATE Activate Variable Pers.
    RS_PERS_VAR_DEACTIVA Deactivate Pers. for Variables
    RS_PERS_WTE_ACTIVATE Activate Web Template Pers.
    RS_PERS_WTE_DEACTIVA Deactivate Pers. for Web Template
    SP01 Spool
    Hope this helps
    Obily

  • Alpha conversions in BW7

    Hello all,
    I found out that transaction for alpha conversion became obsolete in BW 7.0. You can observe this while you try to run TA RSMDCNVEXIT or RSMDEXITON in BW 7.0 SP10+ system is raising following error:
    Data conversion functions are no longer supported Message no. RSMD001
    Since I briefly searched on OSS and I'm not successful to find any relevant note I would like to ask here how Data conversion are handled in BW7. Somebody has any clue?
    PS. Note that I'm running on Unicode system.
    Thanks
    m./

    Hi Martin,
    Since some objects of the new data flow in BI 7.0, for example BIA, are not covered by RSMDCNVEXIT it has been set to obsolete. You should not use it anymore.
    As an alternative to solve your problem, if you would like to switch on a certain customer exit, you have to delete the data, switch on the customer data, and reload the data.
    For further information regarding to Customer exit please check the below links:
    Customer Exits
       http://help.sap.com/erp2005_ehp_04/helpdata/EN/f1/0a56f5e09411d2acb90000e829fbfe/frameset.htm
    Creating Free Characteristics and Characteristic Values
       http://help.sap.com/erp2005_ehp_04/helpdata/EN/cd/6a5378051a11d2a5700000e8407c05/frameset.htm
    Selecting Characteristics and Storing Characteristic Values
       http://help.sap.com/erp2005_ehp_04/helpdata/EN/c1/376a58449a11d188fe0000e8322f96/frameset.htm
    Rgds,
    Colum
    Edited by: Colum Cronin on Jul 7, 2009 4:01 PM

  • Way to find the access of tcodes in BIW

    Hi All,
              Is there any general Tcode to find the authorized tcodes in servers (like production .develop etc) with respect to one loginid ..or is there any other way to find it out,...
      if not please provide the list tcodes that will be required to analyze entire BIW MODULE....
    Thanks and Regards
    Siva

    Hi Siva,
    RSA6 Maintain DataSources
    RSA7 BW Delta Queue Monitor
    RSA8 DataSource Repository
    RSA9 Transfer Application Components
    RSD1 Characteristic maintenance
    RSD2 Maintenance of key figures
    RSD3 Maintenance of units
    RSD4 Maintenance of time characteristics
    RSDBC DB connect
    RSDDV Maintaining Aggregates
    RSIMPCUR Load Exchange Rates from File
    RSISET Maintain InfoSets
    RSKC Maintaining the Permittd Extra Chars
    RSLGMP Maintain RSLOGSYSMAP
    RSMO Data Load Monitor Start
    RSMON BW Administrator Workbench
    RSOR BW Metadata Repository
    RSORBCT BI Business Content Transfer
    RSORMDR BW Metadata Repository
    RSPC Process Chain Maintenance
    RSPC1 Process Chain Display
    RSPCM Monitor daily process chains
    RSRCACHE OLAP: Cache Monitor
    RSRT Start of the report monitor
    RSRT1 Start of the Report Monitor
    RSRT2 Start of the Report Monitor
    RSRTRACE Set trace configuration
    RSRTRACETEST Trace tool configuration
    RSRV Analysis and Repair of BW Objects
    SE03 Transport Organizer Tools
    SE06 Set Up Transport Organizer
    SE07 CTS Status Display
    SE09 Transport Organizer
    SE10 Transport Organizer
    SE11 ABAP Dictionary
    SE24 Class Builder
    SE80 Object Navigator
    RSCUSTA Maintain BW Settings
    RSCUSTA2 ODS Settings
    RSCUSTV*
    RSSM Authorizations for Reporting
    SM04 User List
    SM12 Display and Delete Locks
    SM21 Online System Log Analysis
    SM37 Overview of job selection
    SM50 Work Process Overview
    SM51 List of SAP Systems
    SM58 Asynchronous RFC Error Log
    SM59 RFC Destinations (Display/Maintain)
    LISTCUBE List viewer for InfoCubes
    LISTSCHEMA Show InfoCube schema
    DB02 Tables and Indexes Monitor
    DB14 Display DBA Operation Logs
    DB16 Display DB Check Results
    DB20 Update DB Statistics
    r/3 (bw related)
    SBIW BIW in IMG for OLTP
    BD61 Activate Change Pointers - Generally
    BDLS Convert Logical System Names
    BF11 Application Areas
    RSA2 OLTP Metadata Repository
    RSA3 Extractor Checker
    RSA5 Install Business Content
    RSA6 Maintain DataSources
    RSA7 BW Delta Queue Monitor
    RSA8 DataSource Repository
    RSA9 Transfer Application Components
    RSO2 Oltp Metadata Repository
    RSO3 Set Up Deltas for Master Data
    LO setup table
    OLI1BW INVCO Stat. Setup: Material Movemts
    OLI2BW INVCO Stat. Setup: Stor. Loc. Stocks
    OLI3BW Reorg.PURCHIS BW Extract Structures
    OLI4BW Reorg. PPIS Extract Structures
    OLI7BW Reorg. of VIS Extr. Struct.: Order
    OLI8BW Reorg. VIS Extr. Str.: Delivery
    OLI9BW Reorg. VIS Extr. Str.: Invoices
    OLIABW Setup: BW agency business
    OLIFBW Reorg. Rep. Manuf. Extr. Structs
    OLIIBW Reorg. of PM Info System for BW
    OLIQBW QM Infosystem Reorganization for BW
    OLISBW Reorg. of CS Info System for BW
    OLIZBW INVCO Setup: Invoice Verification
    TSTCT IS THE TABLE WHICH CONTAINS TRANSACTION CODES
    TO GET LIST OF TRANSACTION CODES IN BW
    1.GO TO SE93
    2. PRESS F4
    3. IN THE SEARCH TYPE RS* TO GET THE LIST OF TRANSACTION CODES STARTING WITH RS.
    Here r the some of the transaction codes used by BW developers
    RSBO INFOSPOKE
    RSBOMO2 OPEN HUB MONITOR
    RSBOH1 OPEN HUB MAINTANENCE
    RSBOH2 OPEN HUB MAINTANENCE
    RSBOH3 OPEN HUB MAINTANENCE
    RSBO_EXTRACT AUTHORIZATION CHECK OPEN HUB EXTRACTION
    RSA1 ADMINISTRATOR WORK BENCH
    RSA3 EXTRACTION CHECKER
    RSA5 TRANSFER BUSINESS CONTENT
    RSA6 POST PROCESS OF DATA SORUCES
    RSA7 DELTA QUEUE MONITOR
    RSA8 DATA SOURCE REPOSITORY
    RSA9 TRANSFER APPLICATION COMPONENTS
    RSADMIN MAINTENANCE VIEW
    RSATTR ATTRIBUTE HIERARCHY RUN REALIGNMENT
    RSBBS QUERY JUMP TARGER
    RSD1 MAINTAIN INFO OBJECT
    RSDBC DB CONNECT
    RSDDV AGGREGATE MAINTANENCE
    RSDL DB CONNECT TEST PROGRAM
    RSH1 EDIT HIERARCHY
    RSH3 SIMULATE HIERARCHY
    RSIMG BW IMG
    RSIS1 CREATE INFO SOURCES
    RSISET MAINTAIN INFO SETS
    RSKC MAINTAIN PERMITTED CHARACTERS
    RSMO MONITOR
    RSO2 GENERIC DATA SOURCE
    RSO3 SET UP DELTA FOR GENERIC DATA SOURCE
    RSPC PROCESS CHAIN MAINTENANCE
    RSRAJ START REPORTING AGENT JOB
    RSRT REPORT MONITOR
    RSRTRACE SET TRACE CONFIGURATION
    RSRV ANALYSIS AND REPARI OR BW OBJECTS
    RSSM AUTHORIZATIONS FOR REPORTING
    RSSMQ START QUERY WITH USER
    RSSU53 DISPLAY BW AUTHORIZATION CHECK
    RSZC COPY QUERIES BETWEEN INFO PROVIDERS
    RSZDELETE DELETE QUERY OBJECTS
    RRMX TO GO TO BEX REPORTING FROM RSA1
    SM37 JOB SELECTION/STATUS
    SM38 ABAP EDITOR
    rsa11 InfoProvider
    rsa12 InfoSources
    rsa15 PSA
    RSODS EDIT ODS
    RSD1 EDIT INFO OBJECT
    SU53 CHECKING FOR AUTHORIZATIONS
    RS00 Start menu
    RS12 Overview of master data locks
    RSA0 Content Settings Maintenance
    RSA1 BW Administrator Workbench
    RSA10 Realtime Test Interface Srce System
    RSA11 Calling up AWB with the IC tree
    RSA12 Calling up AWB with the IS tree
    RSA13 Calling up AWB with the LG tree
    RSA14 Calling up AWB with the IO tree
    RSA15 Calling up AWB with the ODS tree
    RSA1OLD BW Administrator Workbench (old)
    RSA2 OLTP Metadata Repository
    RSA3 Extractor Checker
    RSA5 Install Business Content
    RSA6 Maintain DataSources
    RSA7 BW Delta Queue Monitor
    RSA8 DataSource Repository
    RSA9 Transfer Application Components
    RSADMIN RSADMIN maintenance
    RSADRTC70TOADR11 Conversion of table TC70 in ADR11
    RSANWB Model the Analysis Process
    RSANWB_CRM_ATTR Fill CRM Attributes
    RSANWB_EXEC Execute Analysis Process
    RSANWB_IMP Calculation of Importance
    RSANWB_START_ALL Model the Analysis Process
    RSANWB_SURVEY Analysis Process: Create Target Grp
    RSAN_CLTV CLTV Modeling
    RSAN_CLTV1 CLTV
    RSAN_RESP Response Prediction Models
    RSAN_RFM RFM Modeling
    RSAN_SALES_PL_CALL Execute Sales Planning
    RSAN_SURV_SHOW BW Survey
    RSAN_SURV_TG BW Survey: Target Group Management
    RSAN_VERI Analysis Process: Test Monitor
    RSAN_WB_TST IMC Wrapper Transaction for Testing
    RSARCH_ADMIN BW Archive Administration
    RSARFCEX Variant for RSARFCEX
    RSASSIBTCH Schedule Assistant in Background
    RSATTR Attribute/Hierarchy Realignment Run
    RSAWB New AWB
    RSAWBSETTINGSDEL Delete user settings of the AWB
    RSB0 Maintain OLAP authorization object
    RSB1 Display authorization object
    RSB2 Data Marts Generation Center
    RSBBS Maintaining BW Sender-Receiver
    RSBBS_WEB Transaction for the RRI in the Web
    RSBCTMA_AC xCBL Action Codes
    RSBCTMA_DT Mapping of Ext./Int. Document Type
    RSBEB Business Explorer Browser
    RSBMO2 Open Hub Monitor
    RSBO Open Hub Maintenance
    RSBOH1 Open Hub Maintenance
    RSBOH2 Open Hub Maintenance
    RSBOH3 Open Hub Maintenance
    RSBO_EXTRACT Auth Check Open Hub Extraction
    RSBROWSER BW Browser
    RSBWREMOTE Create Warehouse User
    RSCATTAWB CATT Admin. Workbench
    RSCDS Summarization routine
    RSCONCHA Channel conversion
    RSCONFAV Favorites Conversion
    RSCRMDEBUG Set Debug Options
    RSCRMISQ Regis. of Infosets for Target Groups
    RSCRMMDX Edit MDX
    RSCRMMON Monitor Query Extracts
    RSCRMSCEN Regist. Closed-Loop Scenarios
    RSCRM_BAPI Test Program for RSCRM Interface
    RSCRM_REPORT BW Queries with ODBO (to 2nd 0B)
    RSCRT BW Monitor (Near)-Real-Time Loading
    RSCR_MAINT_PUBLISH Maint. of Publishing Variables CR/CE
    RSCR_MAINT_URL Maint. of URL Variables for CR/CE
    RSCUSTA Maintain BW Settings
    RSCUSTA2 ODS Settings
    RSCUSTV1 BW Customizing - View 1
    RSCUSTV10 BW Customizing - View 10
    RSCUSTV11 BW Customizing - View 11
    RSCUSTV12 Microsoft Analysis Services
    RSCUSTV13 RRI Settings for Web Reporting
    RSCUSTV14 OLAP: Cache Parameters
    RSCUSTV15 BW Customizing - View 11
    RSCUSTV16 BW Reporting
    RSCUSTV17 Settings: Currency Translation
    RSCUSTV18 DB Connect Settings
    RSCUSTV19 InfoSet Settings
    RSCUSTV2 BW Customizing - View 2
    RSCUSTV3 BW Customizing - View 3
    RSCUSTV4 BW Customizing - View 4
    RSCUSTV5 BW Customizing - View 5
    RSCUSTV6 BW Customizing - View 6
    RSCUSTV7 BW Customizing - View 7
    RSCUSTV8 BW Customizing - View 8
    RSCUSTV9 BW Customizing - View 9
    RSD1 Characteristic maintenance
    RSD2 Maintenance of key figures
    RSD3 Maintenance of units
    RSD4 Maintenance of time characteristics
    RSD5 Internal: Maint. of Techn. Chars
    RSDBC DB connect
    RSDB_ADD_ID_2_CRM Create External ID for CRM-GP
    RSDB_INIT Initial Download of D&B Data
    RSDCUBE Start: InfoCube editing
    RSDCUBED Start: InfoCube editing
    RSDCUBEM Start: InfoCube editing
    RSDDV Maintaining Aggregates
    RSDIOBC Start: InfoObject catalog editing
    RSDIOBCD Start: InfoObject catalog editing
    RSDIOBCM Start: InfoObject catalog editing
    RSDL DB Connect - Test Program
    RSDMD Master Data Maintenance w.Prev. Sel.
    RSDMD_TEST Master Data Test
    RSDMPRO Initial Screen: MultiProvider Proc.
    RSDMPROD Initial Screen: MultiProvider Proc.
    RSDMPROM Initial Screen: MultiProvider Proc.
    RSDMWB Data Mining Workbench
    RSDODS Initial Screen: ODS Object Processng
    RSDODSD Initial Screen: ODS Proces. (Deliv.)
    RSDPMDDBSETUP Creates a MOLAP Database in MSAS
    RSDPMOLAPDS MOLAP DataSource creation
    RSDPRFCDSETUP Create MOLAP Rfc Tests
    RSDSD DataSource Documentation
    RSDU_SHOWTEMPINCTAB RSDU_SHOWTEMPINCTAB
    RSDV Validity Slice Maintenance
    RSD_ACAT Maintain InfoObject catalog
    RSEDIT Old editor
    RSEIDOCM Variant for RSEIDOCM
    RSENQ Display of Lock Log
    RSEOUT00 Variant for RSEOUT00
    RSFH Test Transaction Data Extractors
    RSFLAT Flat MDX
    RSFREQUPL Frequent upload from source systems
    RSGWLST Accessible Gateways
    RSH1 Edit hierarchy initial screen
    RSH3 Simulate hierarchies
    RSHIER Hierarchy maintenance w/o AdmWB
    RSHIERINT Hierarchy maintenance from AdmWB
    RSHIERSIM Simulate hierarchies
    RSICUBE Maintain/Change InfoCubes (Internal)
    RSIMG BW IMG
    RSIMPCUR Load Exchange Rates from File
    RSINPUT Manual Data Entry
    RSIR_DELTATRACK KPro Delta Tracking
    RSISET Maintain InfoSets
    RSKC Maintaining the Permittd Extra Chars
    RSLDAPSYNC_USER LDAP Synchronization of Users
    RSLGMP Maintain RSLOGSYSMAP
    RSMD Extractor Checker
    RSMDCNVEXIT Conversn to Consistent Intern. Vals
    RSMDEXITON Activate Conversion Routine
    RSMO Data Load Monitor Start
    RSMON BW Administrator Workbench
    RSMONCOLOR Traffic light color in the Monitor
    RSMONITOR_DB D&B Integration
    RSMONMAIL Mail Addresses for Monitor Assistant
    RSNPGTEST Test Network Plan Control
    RSNPGTEST2 Test Network Plan Control
    RSNSPACE BW Namespace Maintenance
    RSO2 Oltp Metadata Repository
    RSO3 Set Up Deltas for Master Data
    RSOCONTENT Administration of a Content System
    RSOCOPY Copy from TLOGO Objects
    RSODADMIN Administration BW Document Managemt.
    RSOR BW Metadata Repository
    RSORBCT BI Business Content Transfer
    RSORMDR BW Metadata Repository
    RSPC Process Chain Maintenance
    RSPC1 Process Chain Display
    RSPCM Monitor daily process chains
    RSPFPAR Display profile parameter
    RSQ02 Maintain InfoSets
    RSQ10 SAP Query: Role Administration
    RSQ11 InfoSet Query: Web reporting
    RSRAJ Starts a Reporting Agent Job
    RSRAM Reporting Agent Monitor
    RSRAPS Manages Page Store
    RSRCACHE OLAP: Cache Monitor
    RSRCATTTRACE Catt transaction for trace tool
    RSREP BW Administrator Workbench
    RSRFCCHK RFC destinations with logon data
    RSRHIERARCHYVIRT Maintain Virtual Time Hierarchies
    RSRQ Data Load Monitor for a Request
    RSRR_WEB Report-Report Interface in Web
    RSRT Start of the report monitor
    RSRT1 Start of the Report Monitor
    RSRT2 Start of the Report Monitor
    RSRTRACE Set trace configuration
    RSRTRACETEST Trace tool configuration
    RSRV Analysis and Repair of BW Objects
    RSRVALT Analysis of the BW objects
    RSR_TRACE Trace Monitor
    RSR_WEB_VARIABLES Variable Entry in Web
    RSSCD100_PFCG Change Docs for Role Administration
    RSSCD100_PFCG_USER for Role Assignment
    RSSCM_APPL Application settings SCM4.0 and BW
    RSSD Access for scheduler
    RSSE Selection start InfoCube
    RSSGPCLA Maintain program class
    RSSG_BROWSER Simple Data Browser
    RSSM Authorizations for Reporting
    RSSMQ Start Query with User
    RSSMTRACE Reporting Log Authorization
    RSSTARTMON Starting the monitor in parall.proc.
    RSSU53 Display authorization check BW
    RST22 Old Short-Dump Overview
    RSTB Choose Object Name
    RSTBHIST Table history
    RSTG_BUPA Target Group Sel. Business Partners
    RSTG_CUST Target Group Selection Customers
    RSTG_DB Target Group Selection D&B
    RSTG_DB_WEB Target Group Selection D&B
    RSTPRFC Create Destination for After-Import
    RSU0 Update rules overview
    RSU1 Create update rules
    RSU1I Create update rules
    RSU1O Create Update Rules
    RSU2 Change update rules
    RSU2I Change update rules
    RSU2O Change Update Rules
    RSU3 Display update rules
    RSU3I Display update rules
    RSU3O Display Update Rules
    RSU6 Delete update rules
    RSU6I Delete update rules
    RSU6O Delete update rules
    RSU7 Data Extraction: Maintain Parameters
    RSUSR003 Check standard user passwords
    RSUSR200 List of Users per Login Date
    RSWELOGD Delete Event Trace
    RSWEWWDHMSHOW Display Background Job SWWERRE
    RSWEWWDHSHOW Display Work Item Deadline Monitorng
    RSWWCLEAR Execute Work Item Clearing Work
    RSWWCOND Execute Work Item Rule Monitoring
    RSWWDHEX ExecuteWorkItemDeadlineMonitoring
    RSWWERRE Start RSWWERRE
    RSZC Copying Queries between InfoCubes
    RSZDELETE Deletion of query objects
    RSZT Get Test Component
    RSZTESTFB Shortcut Function Test Environment
    RSZV Call up of view V_RSZGLOBV
    RSZVERSION Set frontend version
    RS_AWB_REMOTE Remote AWB Staging
    RS_BCT_BWBEOTYP Maintain BW Backend Object Types
    RS_DS_CHECK Check consistency request
    RS_ISTD_REMOTE Maintain InfoSource
    RS_LOGSYS_CHECK Source System Tool
    RS_PERS_ACTIVATE Activation of BEx Personalization
    RS_PERS_BOD_ACTIVATE Activate BEx Open Pers.
    RS_PERS_BOD_DEACTIVA Deactivate Pers. for BEx Open
    RS_PERS_VAR_ACTIVATE Activate Variable Pers.
    RS_PERS_VAR_DEACTIVA Deactivate Pers. for Variables
    RS_PERS_WTE_ACTIVATE Activate Web Template Pers.
    RS_PERS_WTE_DEACTIVA Deactivate Pers. for Web Template
    SP01 Spool
    RSA1 BW Administrator Workbench
    RSA11 Calling up AWB with the IC tree
    RSA12 Calling up AWB with the IS tree
    RSA13 Calling up AWB with the LG tree
    RSA14 Calling up AWB with the IO tree
    RSA15 Calling up AWB with the ODS tree
    RSA2 OLTP Metadata Repository
    RSA3 Extractor Checker
    RSA5 Install Business Content
    RSA6 Maintain DataSources
    RSA7 BW Delta Queue Monitor
    RSA8 DataSource Repository
    RSA9 Transfer Application Components
    RSD1 Characteristic maintenance
    RSD2 Maintenance of key figures
    RSD3 Maintenance of units
    RSD4 Maintenance of time characteristics
    RSDBC DB connect
    RSDCUBE Start: InfoCube editing
    RSDCUBED Start: InfoCube editing
    RSDCUBEM Start: InfoCube editing
    RSDDV Maintaining
    Aggregates
    RSDIOBC Start: InfoObject catalog editing
    RSDIOBCD Start: InfoObject catalog editing
    RSDIOBCM Start: InfoObject catalog editing
    RSDL DB Connect - Test Program
    RSDMD Master Data Maintenance w.Prev. Sel.
    RSDMD_TEST Master Data Test
    RSDMPRO Initial Screen: MultiProvider Proc.
    RSDMPROD Initial Screen: MultiProvider Proc.
    RSDMPROM Initial Screen: MultiProvider Proc.
    RSDMWB Customer Behavior Modeling
    RSDODS Initial Screen: ODS Object Processng
    RSIMPCUR Load Exchange Rates from File
    RSINPUT Manual Data Entry
    RSIS1 Create InfoSource
    RSIS2 Change InfoSource
    RSIS3 Display InfoSource
    RSISET Maintain InfoSets
    RSKC Maintaining the Permittd Extra Chars
    RSLGMP Maintain RSLOGSYSMAP
    RSMO Data Load Monitor Start
    RSMON BW Administrator Workbench
    RSOR BW Metadata Repository
    RSORBCT BI Business Content Transfer
    RSORMDR BW Metadata Repository
    RSPC Process Chain Maintenance
    RSPC1 Process Chain Display
    RSPCM Monitor daily process chains
    RSRCACHE OLAP: Cache Monitor
    RSRT Start of the report monitor
    RSRT1 Start of the Report Monitor
    RSRT2 Start of the Report Monitor
    RSRTRACE Set trace configuration
    RSRTRACETEST Trace tool configuration
    RSRV Analysis and Repair of BW Objects
    SE03 Transport Organizer Tools
    SE06 Set Up Transport Organizer
    SE07 CTS Status Display
    SE09 Transport Organizer
    SE10 Transport Organizer
    SE11 ABAP Dictionary
    SE18 Business Add-Ins: Definitions
    SE18_OLD Business Add-Ins: Definitions (Old)
    SE19 Business Add-Ins: Implementations
    SE19_OLD Business Add-Ins: Implementations
    SE21 Package Builder
    SE24 Class Builder
    SE80 Object Navigator
    RSCUSTA Maintain BW Settings
    RSCUSTA2 ODS Settings
    RSCUSTV*
    RSSM Authorizations for Reporting
    SM04 User List
    SM12 Display and Delete Locks
    SM21 Online System Log Analysis
    SM37 Overview of job selection
    SM50 Work Process Overview
    SM51 List of SAP Systems
    SM58 Asynchronous RFC Error Log
    SM59 RFC Destinations (Display/Maintain)
    LISTCUBE List viewer for InfoCubes
    LISTSCHEMA Show InfoCube schema
    WE02 Display IDoc
    WE05 IDoc Lists
    WE06 Active IDoc monitoring
    WE07 IDoc statistics
    WE08 Status File Interface
    WE09 Search for IDoc in Database
    WE10 Search for IDoc in Archive
    WE11 Delete IDocs
    WE12 Test Modified Inbound File
    WE14 Test Outbound Processing
    WE15 Test Outbound Processing from MC
    WE16 Test Inbound File
    WE17 Test Status File
    WE18 Generate Status File
    WE19 Test tool
    WE20 Partner Profiles
    WE21 Port definition
    WE23 Verification of IDoc processing
    DB02 Tables and Indexes Monitor
    DB14 Display DBA Operation Logs
    DB16 Display DB Check Results
    DB20 Update DB Statistics
    RSA1 BW Administrator Workbench
    RSA11 Calling up AWB with the IC tree
    RSA12 Calling up AWB with the IS tree
    RSA13 Calling up AWB with the LG tree
    RSA14 Calling up AWB with the IO tree
    RSA15 Calling up AWB with the ODS tree
    RSA2 OLTP Metadata Repository
    RSA3 Extractor Checker
    RSA5 Install Business Content
    RSA6 Maintain DataSources
    RSA7 BW Delta Queue Monitor
    RSA8 DataSource Repository
    RSA9 Transfer Application Components
    RSD1 Characteristic maintenance
    RSD2 Maintenance of key figures
    RSD3 Maintenance of units
    RSD4 Maintenance of time characteristics
    RSDBC DB connect
    RSDCUBE Start: InfoCube editing
    RSDCUBED Start: InfoCube editing
    RSDCUBEM Start: InfoCube editing
    RSDDV Maintaining
    Aggregates
    RSDIOBC Start: InfoObject catalog editing
    RSDIOBCD Start: InfoObject catalog editing
    RSDIOBCM Start: InfoObject catalog editing
    RSDL DB Connect - Test Program
    RSDMD Master Data Maintenance w.Prev. Sel.
    RSDMD_TEST Master Data Test
    RSDMPRO Initial Screen: MultiProvider Proc.
    RSDMPROD Initial Screen: MultiProvider Proc.
    RSDMPROM Initial Screen: MultiProvider Proc.
    RSDMWB Customer Behavior Modeling
    RSDODS Initial Screen: ODS Object Processng
    RSIMPCUR Load Exchange Rates from File
    RSINPUT Manual Data Entry
    RSIS1 Create InfoSource
    RSIS2 Change InfoSource
    RSIS3 Display InfoSource
    RSISET Maintain InfoSets
    RSKC Maintaining the Permittd Extra Chars
    RSLGMP Maintain RSLOGSYSMAP
    RSMO Data Load Monitor Start
    RSMON BW Administrator Workbench
    RSOR BW Metadata Repository
    RSORBCT BI Business Content Transfer
    RSORMDR BW Metadata Repository
    RSPC Process Chain Maintenance
    RSPC1 Process Chain Display
    RSPCM Monitor daily process chains
    RSRCACHE OLAP: Cache Monitor
    RSRT Start of the report monitor
    RSRT1 Start of the Report Monitor
    RSRT2 Start of the Report Monitor
    RSRTRACE Set trace configuration
    RSRTRACETEST Trace tool configuration
    RSRV Analysis and Repair of BW Objects
    SE03 Transport Organizer Tools
    SE06 Set Up Transport Organizer
    SE07 CTS Status Display
    SE09 Transport Organizer
    SE10 Transport Organizer
    SE11 ABAP Dictionary
    SE18 Business Add-Ins: Definitions
    SE18_OLD Business Add-Ins: Definitions (Old)
    SE19 Business Add-Ins: Implementations
    SE19_OLD Business Add-Ins: Implementations
    SE21 Package Builder
    SE24 Class Builder
    SE80 Object Navigator
    RSCUSTA Maintain BW Settings
    RSCUSTA2 ODS Settings
    RSCUSTV*
    RSSM Authorizations for Reporting
    SM04 User List
    SM12 Display and Delete Locks
    SM21 Online System Log Analysis
    SM37 Overview of job selection
    SM50 Work Process Overview
    SM51 List of SAP Systems
    SM58 Asynchronous RFC Error Log
    SM59 RFC Destinations (Display/Maintain)
    LISTCUBE List viewer for InfoCubes
    LISTSCHEMA Show InfoCube schema
    WE02 Display IDoc
    WE05 IDoc Lists
    WE06 Active IDoc monitoring
    WE07 IDoc statistics
    WE08 Status File Interface
    WE09 Search for IDoc in Database
    WE10 Search for IDoc in Archive
    WE11 Delete IDocs
    WE12 Test Modified Inbound File
    WE14 Test Outbound Processing
    WE15 Test Outbound Processing from MC
    WE16 Test Inbound File
    WE17 Test Status File
    WE18 Generate Status File
    WE19 Test tool
    WE20 Partner Profiles
    WE21 Port definition
    WE23 Verification of IDoc processing
    DB02 Tables and Indexes Monitor
    DB14 Display DBA Operation Logs
    DB16 Display DB Check Results
    DB20 Update DB Statistics
    You can use Transaction SE93 - most of the BW transaction and also tables start with RS*
        Hope this helps you.
    Regards,
    Yokesh.

  • What happens to data, when Info object property is changed to have ALPHA

    Hi experts,
    I have a trivial question,
    What happens to existing data, when I change the info Object property to have an ALPHA convesion routine ? Specifically I need to know, will it remove any similar looking entries ??
    thanks in advance
    D Bret

    Check this:
    Re: Alpha conversion for an existing infoobjects
    Re: ALPHA conversion routine - how to change an existing InfoObject
    Alpha conversion
    TCODE: RSMDCNVEXIT in BW and What is Alpha Conversion?
    Hope it helps..

Maybe you are looking for