RSO2-- Deleta Update disabled
Hello All,
I created a Datasource in RSO2 using a Table.
in data source i have date field also.
I have found Delta update Checkbosx was disabled.
I have to enable it, to maintain delta upload in BW. How can I do this? please suggest me.
Regards,
Ravi
Ravi,
you must control the plug in,
see the note 536469 ( The delta for the generic extractor only supports one client in PI
2002.1.In systems before 2002.1 Support Package 04, the extraction
simply causes inconsistent data, in systems after Support Package 04,
the system issues a relevant error message (R8 278) when extracting.
As of PI 2003.1, the delta for the generic extractor also controls the
extraction from several clients.)
alessandro
Similar Messages
-
Ebo designer - Add, delete , update options disable
Hi
I am trying to add a new element in the EBO (Content Editor of EBO designer), or Add creating new package.
The Add, Delete , Update options are disabled which restricts me to add new elements.
In the security realms of WLS the AIA groups are added and clubbed with requisite user (As metioned in Post installation step of AIA 3.0).
Any hint will be highly appreciated.
If anybody have step by step approach for using EboDesigner, kindly share it.
Thanks
GauravGaurav,
Ebo Designer developer's guide has the information you are looking for. At a high level, you can only create a package under customer pkg (EBO should be created under customer -> data services). In the editor, make sure your business context is */Customer to create any component, add association etc. Same rule applies to any EBO you want to update. The business context has to be Customer for any operation to work. -
How do you permantely delete or disable the add-on toolbar?
The add-on toolbar keeps popping up at the bottom of the browser. I go into View, Tool bars and click to disable the add-on tool bar and it disappears. I browse and, behold, the add-on tool bar appears again at the bottom. I repeat and the same results.
I would like to permanently delete, or disable this tool bar if possible.Eröffnen wir mit einer Klatsche, Chapeau Frau Gause,
Perhaps it it the search function that does not work properly, because my key words that brought up this thread (Which has neither been closed nor referred to "the solution" - what moderators should do in forums).
- Update the system > There is no update for Illustrator 2014.1
- convert to a smart rectangle > Sure, but cumbersome
- free form tool > yep, found that one as well
The biq question remains - when will the bugfix release come? -
How do I insert/Delete/Update a row to the DB Table from Business Component Browser
I am using the wizard and created a project containing Business component which contain some table.
When I run the project I could see "Oracle Business Component Browser(local)" and when I select some table from "View Object Member" I get a window displaying all the field of that table and I could browse all the info.
My Problem is when I try to insert a new record/Delete the existing record or update some record it never gets reflected to the DataBase.
When I try to insert a new row I did save and there was a dialog box displayed saying "Transaction ID is 1". But finally It's not reflected in the Database.
Can some one guide me how can I do insert/delete/update operation from Oracle Component Business Browser so that the changes reflect to the Original DataBase.
Thanks in advance
JitendraJitendra,
This may be a problem of caching. If you do an update,insert, or delete, and do not receive an error, then the transaction should indeed be posted.
I assume you are hitting the Save icon after your changes if you are getting a transaction ID. Are you checking for the updates through another session (i.e. SQL*Plus), or do you then requery the View Object in the tester? Do you exit the tester and come back in and not see the changes? -
ORACLE ERROR ORA-32314: REFRESH FAST unsupported after deletes/updates
hi,
I have a materialized view created with fast refresh on demand option. Now when i try to refresh it manually the next day, it gives me an error . I have both count(*) and count(1) inside the materialized view. There is update and delete transactions done on most of the tables. The refresh is set to be at 4 am though a refresh group . But it fails with the error shown below . Please help. thanks
here is the script from toad
DROP MATERIALIZED VIEW MYPORTAL.ACCOUNT_COST_CATEGORY_MV;
CREATE MATERIALIZED VIEW MYPORTAL.ACCOUNT_COST_CATEGORY_MV
TABLESPACE USERS
PCTUSED 0
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOCACHE
LOGGING
NOCOMPRESS
NOPARALLEL
BUILD IMMEDIATE
USING INDEX
TABLESPACE USERS
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
REFRESH FAST ON DEMAND
WITH PRIMARY KEY
AS
/* Formatted on 2011/01/07 10:04 (Formatter Plus v4.8.8) */
SELECT ac.account_id,
ac.account_manager mgr_id,
ac.account_number,
ac.account_name,
bc.burden_center_name burden_center,
p.surname_isi || ', ' || p.first_name account_manager,
p.division_id,
item.code_id,
item.code_name cost_category_item,
TO_NUMBER (TO_CHAR (ap.first_day, 'YYYY')) period_year,
ap.first_day period,
ap.fiscal_system_period_cal_yr_eq || ', ' || ap.fiscal_year period_asr,
COUNT (*) total_row_count,
COUNT (1) total_one_count,
SUM (NVL (ad.current_expense, 0)) expense,
SUM (NVL (ad.total_budget, 0)) budget,
SUM (NVL (ad.cumltv_expense, 0)) cumltv_expense,
SUM (NVL (ad.commitments, 0)) commitments,
SUM (NVL (ad.budget_balance, 0)) budget_balance
FROM accounts ac,
burden_centers bc,
personnel p,
asr_headers ah,
asr_details ad,
codes item,
codes costcat,
all_periods ap,
codes cost_element,
accounting_base_group abg
WHERE ac.account_manager = p.personnel_id
AND ac.burden_center_id = bc.burden_center_id
AND ac.account_id = ah.account_id
AND ah.asr_header_id = ad.asr_header_id
AND ah.period_asr =
ap.fiscal_system_period_cal_yr_eq || ', ' || ap.fiscal_year
AND abg.cost_element_cat_item_id = item.code_id
AND cost_element.code_id = abg.cost_element_id
AND ad.object_code = cost_element.code_value
AND item.code_parent_id = costcat.code_id
AND ( costcat.code_name = 'Report 1'
OR (costcat.code_name = 'Base' AND item.code_name = 'MTDC')
GROUP BY ac.account_id,
ac.account_manager,
ac.account_number,
ac.account_name,
bc.burden_center_name,
p.surname_isi || ', ' || p.first_name,
p.division_id,
item.code_id,
item.code_name,
TO_NUMBER (TO_CHAR (ap.first_day, 'YYYY')),
ap.first_day,
ap.fiscal_system_period_cal_yr_eq || ', ' || ap.fiscal_year;
COMMENT ON MATERIALIZED VIEW MYPORTAL.ACCOUNT_COST_CATEGORY_MV IS 'snapshot table for snapshot MYPORTAL.ACCOUNT_COST_CATEGORY_MV';
CREATE INDEX MYPORTAL.ACCOUNT_COST_CAT_MV_IDX ON MYPORTAL.ACCOUNT_COST_CATEGORY_MV
(ACCOUNT_ID, CODE_ID, PERIOD)
LOGGING
TABLESPACE USERS
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOPARALLEL;
-- Note: Index I_SNAP$_ACCOUNT_COST_CATEG will be created automatically
-- by Oracle with the associated materialized view.
here is the error :
10:10:04 SQL> exec dbms_mview.refresh('account_cost_category_mv');
BEGIN dbms_mview.refresh('account_cost_category_mv'); END;
ERROR at line 1:
ORA-32314: REFRESH FAST of "MYPORTAL"."ACCOUNT_COST_CATEGORY_MV" unsupported after deletes/updates
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2254
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2460
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2429
ORA-06512: at line 1
10:10:14 SQL>Check out the error cause and action:
ORA-32314: REFRESH FAST of "string"."string" unsupported after deletes/updates
Cause: One or more deletes or updates has been performed on one or more of the detail tables referenced by the specified materialized view. This materialized view does not support fast refresh after deletes or updates.
Action: Use REFRESH COMPLETE. Note: you can determine why your materialized view does not support fast refresh after deletes or updates using the DBMS_MVIEW.EXPLAIN_MVIEW() API. -
Identifier in BOMMAT03 to find if the component is add/delete/update?
Hi all,
Is there an Identifier in BOMMAT03 to find if the component is to be add/delete/update?
Based on add/delete/update flg, i need to execute a MII transaction after the workflow is executed.
Thanks,
ShridharHello,
I don't believe there is such identified for component. I think BOMMAT just sends current BOM state and doesn't provide any info about previous object config.
Regards,
Konstantin Chernega -
Getting users disabled/deleted with disabled resources in OIM
Hi,
Consider following use case related to OIM:
To get the Users deleted or disabled on a particular date with their 'AD User' resources which are in disabled state.
By means of built in reports i can get the users disabled or deleted for particular date.... how do i get the disabled AD User resource for each user....
i can go for scheduler task but how to proceed on that?the exact requirement here is to get the users/deleted a day before along with their 'AD User' resources which are disabled
getObjectsByTypeStatus(long plUserKey, java.lang.String psObjectType, java.lang.String psStatus)
Gets a list of all the objects of the specified type that have been provisioned for a user and are in the specified status.
What i can make out here is that:
i need to write some logic that would give users disabled/deleted say yesterday... after this i would loop in these user keys into getObjectsByTypeStatus that would give resources disabled for each user.
Am i correct?
Now how do i get the users disabled/deleted yesterday. This is realised by default Users Disabled/Users deleted report.
But how do i use it in my scheduler
Edited by: Chhavi Saluja on Jun 30, 2010 1:20 AM -
Single Page Spry Tabbed Insert - Delete - Update
Hi Guys
I like to make a page with three Spry Tabs.
* Using ( PHP - Mysql )
* Example ( Table of "Users" Fields ID, Name, Age )
( First Tab )
List of all people with navigation dividing table by ten rows
each time.
On each row Delete & Update This person.
When Clicked on Delete [ Delete This Person and update the
list ]
When clicked on Update [ Go to third tab and update this
exact person ]
( Second Tab )
Insert new person to Mysql
( Third Tab )
Update the person who was send here to be updated from tab
one
Can I have all list - Insert - Delete - Update in one page
under different Spry Tabs? How can I send these info from one tap
to another. How should I go about this?It was never possible to have more than one of those
behaviours on a page
using the standard behaviours in previous versions. You
always had to write
your own scripts.
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"Sanj" <[email protected]> wrote in message
news:enjulr$qma$[email protected]..
> Hi,
>
> Prior to Dreamweaver 8.02 it was possible to have more
than 1
> Insert/delete/update however this is no longer the case
- is there a way
> around this?
>
> Thanks!
>
> Sanj
> -
How to delete or disable chart
How can I disable chart from the existing report?
Do I need to go WAD and look for the templet for particular query and check for setting?
Query contains the chart, so I am assuming web template was used to create it. Pleas help me to get some directions and steps to delete or disable the chart.
Thanks,Hi Isac,
If you want to disable chart in report you need to go to the WAD template of that particular report and you can remove that chart from the templete.
Chat contains query behind it and query doesn't contains any chart.
Revert back if you still have any queries.
Regards,
Rajkandula -
Hello All,
When iam deleting an update rule it is not getting deleted and iam getting message saying underlying infosource does not exists .The underlying infosource is deleted long before any way how come deleting update rule depends on infosource. Please give me solution to delete update rule.Try going into RSRV and choose All Elementary Tests => Database => Database Information about InfoProvider Tables and Databank Paramerters of *-Schema Tables for Infocube.
Those two options may help to correct the inconsistent state the database is currently in.
Another option .. copy your data target as a backup. Delete the data target, then copy it back.
Brian -
Stored proecedure tutorial for insert, delete, update,select
I want to integrate the stored procedure in my project
i am using jsp,
any one suggest me, stored proecedure tutorial for insert, delete, update,select
thanx.Whether you are using JSP or not should not affect your decision (though I would recommend checking out the MVC pattern, and recommend against doing data access code from your JSP's).
You simply need one tutorial on how to invoke a stored procedure. The stored procedure you write can have INSERT, SELECT, UPDATE, DELETE, whatever. You simply have to master the concepts involved in java.sql.CallableStatement. (And then you can get more fancy with vendor-specific extensions).
However, I am a bit confused. You want a tutorial on stored procedures, but then you indicate very normal DML statements like INSERT, UPDATE and DELETE. All of these (queries, DML and stored procedures) fall under the general umberella of JDBC. So, it is always a good place to start with a plain ole JDBC tutorial.
java.sun.com/docs/books/tutorial/jdbc/index.html
www.onjava.com/pub/a/onjava/2003/08/13/stored_procedures.html
- Saish -
I have a Creative Cloud build with system wide updates disabled on Mac OSX 10.9.5. Which file needs to be edited to re-enable the auto updates? What is the value that needs to be edited? Thanks
Ljetjwem I am sorry but I don't understand you request. What specific error messages are you receiving? If updates are disabled then please contact your I.T. department or the individuals managing the computer.
-
Can i delete updates from my start up disc on MacBook
My start up disc is full!!! Can I delete Updates files which contain large amounts of space as they are generally installers that I assume I can get elsewhere should I need them in the future?
You should not have any problem by deleting installers, but I would recommend you to make a backup of your files before modifying any system folder.
-
How can i install shockwave with auto updates disabled?
how can i install shockwave with auto updates disabled?
i need to push out shockwave to all our machines and i need to have autoupdates disabled? whats the trick?I ran with native io enabled and now i need to see how things happen with native io disabled.I am trying to understand the various aspects of the server.
Can you help me? How to set the default queue and application specific queues , and oofcourse socket readers in the case native performance packs are not used?
Please, I will be very grateful. -
AD Identity Service: Delete or Disable users that aren't found?
We currently set users to be "disabled" but then we have to periodically remember to go in there and delete them manually. It also creates issues with duplicate login names. Do you delete your users automatically? I've always been concerned that if something goes wrong with a sync then all my users would be deleted.
We had the same issue here, so I wrote an external operation that piggybacks on the user sync job and deletes any disabled users older than X amount of days. For instance, in our case users are deleted after 180 days of being disabled (this is a bit extreme). This way you can give yourself a few days before the users are actually deleted, but keep the process automated. There are a couple of options built in, which should be discernible from the source code. Here is the source:
package com.oracle.services.jobs;
import com.oracle.services.utility.SessionManager;
import com.plumtree.openfoundation.util.XPCalendar;
import com.plumtree.openfoundation.util.XPDateTime;
import com.plumtree.portaluiinfrastructure.resultwrapper.ASQueryResultWrapper;
import com.plumtree.server.IPTObjectManager;
import com.plumtree.server.IPTQueryResult;
import com.plumtree.server.IPTSession;
import com.plumtree.server.IPTUser;
import com.plumtree.server.IPTUserManager;
import com.plumtree.server.PT_LOCKSTATES;
import com.plumtree.server.PT_PROPIDS;
* This class takes care of the automation server job for deleting user accounts
* which have been disabled for some number of days.
* @author hross
public class DeleteDisabledAccountsJob {
// filter for only deleting agent disabled accounts
private static String FILTER_AGENT = "This user has been locked by a User Synchronization Job.";
// filter for deleting all disabled accounts (including those disabled by an
// admin)
private static String FILTER_ALL = "";
public static void main(String[] args) {
// check arguments
if ((args.length < 2) || (args.length > 4)) {
System.err.println("usage: ");
System.err
.println("DeleteDisabledAccountsJob <security_token> <num_days>");
System.err
.println("DeleteDisabledAccountsJob <security_token> <num_days> all");
return;
// get a session from the login token
IPTSession session = SessionManager.createSession(args[0]);
// get a number of days
int numDays = 0;
try {
numDays = Integer.parseInt(args[1]);
} catch (Exception ex) {
System.err.println("Number of days not a valid integer.");
return;
// filter all or just the agent?
boolean filterAll = ((args.length > 2) && (args[2].equals("all")))
|| ((args.length > 3) && (args[3].equals("all")));
boolean test = ((args.length > 2) && (args[2].equals("test")))
|| ((args.length > 3) && (args[3].equals("test")));
if (test) {
System.err.println("This is a just a test. Nothing will be deleted.");
if (filterAll) {
System.err
.println("This job will delete all disabled accounts (even those disabled by an admin).");
} else {
System.err
.println("This job will delete only users disabled by an authentication source.");
// calculate 180 days in the past based on today's date
XPDateTime cutOff = new XPDateTime();
XPCalendar xpCalendar = XPCalendar.GetInstance();
xpCalendar.Add(XPCalendar.HOUR, -(24 * numDays));
cutOff = xpCalendar.GetTime(); // subtract 180 days from current time
System.err
.println("This job will delete any user accounts disabled before: "
+ cutOff.toString());
// query for disabled user accounts
IPTUserManager userManager = (IPTUserManager) session.GetUsers();
IPTQueryResult result = userManager.GetLockedAccounts(filterAll ? FILTER_ALL
: FILTER_AGENT, 0, -1);
//ASQueryResultWrapper ptqrUserLock = new ASQueryResultWrapper(result);
for (int i = 0; i < result.RowCount(); i++) {
// get some basic user info
int userId = result.ItemAsInt(i, PT_PROPIDS.PT_PROPID_OBJECTID);
String name = result.ItemAsString(i, PT_PROPIDS.PT_PROPID_NAME);
String login = result.ItemAsString(i, PT_PROPIDS.PT_PROPID_USER_LOGINNAME);
XPDateTime dt = result.ItemAsXPDateTime(i, PT_PROPIDS.PT_PROPID_CREATED);
// System.err.println("Found account: (" + userId + ") " + login
// + ", " + name);
// check to see if we need to delete the user
if (dt.Before(cutOff)) {
if (!test) { // if test, we just want to see who we would have delted
// we have to try to unlock the user b/c of a bug in
// automation
// server
IPTUser user = (IPTUser) ((IPTObjectManager) userManager)
.Open(userId, false);
try {
user.SetLockedStatus(false);
user.Store();
} catch (Exception ex) {
// we expect this will fail b/c of a bug
// make sure the account gets unlocked
if (user.GetLockState() == PT_LOCKSTATES.PT_LOCKED)
user.UnlockObject();
// okay, now we can delete the user
((IPTObjectManager) userManager).Delete(userId);
System.err.println("Removed user account: " + userId + " - " + login + " - " + name);
}
Maybe you are looking for
-
Customer service...an open letter
Hi, I have been a bt customer for most of my life via phone........moved to bt broadband 3 years ago and had no problems untill 6 months ago, but as not always in the country was not a big issue untill recently, after numerous call to customer servic
-
I cannot access or connect to my app store on macbook pro
I am unable to connect to my app store with my mac book pro. When I open the app it flashes a lot, I have tried going into 'store' on the tool bar and signing into my account but it comes up "connection failed'. We have tried using wifi and etherne
-
120Gb Ipod classic not showing in iTunes
Help me! We recently bought the 120GB Classic ipod and realised when we got home that it didnt work through the USB port on our stereo (JVC). So, I did a little bit of homework and in iTunes, I ticked the boxes for 'Use as mass storage device' and 'm
-
Special (diacritical) characters in Spotlight
When I have English set as "iPhone Language", and I type "tomas" in Spotlight search, I get search results including "Tomáš" (a name which includes special characters with diacritical marks). If I switch iPhone Language to Czech, I get no search resu
-
i bought some ipad apps but cannot find them on my ipad?