Rsobj: serious error occured while reading history data

Hi Friends,
When I open the query in query designer or when i open the query in web application designer it shows the above mentioned error.
I tried to execute the prog RS_PERS_ACTIVATE to activate history data, it shows the 'Activation of history failed'.
The web appln designer doesn't get activated due to this.
How to proceed further.
Thanks in advance.
Regards,
Prabhu

Hi,
I ve done wat is mentioned in that NOTE, its just saying to execute the program mentioned in my first post.
When the program gets executing, it says 'Activation failed'.
How to proceed further.
Thanks in advance.
Regards,
Prabhu.

Similar Messages

  • Raw Read Error Rate, Errors occurred while reading raw data from a disk

    hi
    when I turn my pavilion dv6 2170ee computer on screen shows below error.
    system diognostics (F2) does not any work
    and when my windows7 comming up this error was shown.
    I install Hard Disk Sentinel software and this program shows below:
    Failure Predicted - Attribute: 1 Raw Read Error Rate, Errors occurred while reading raw data from a disk. Indicate problem with the disk surface or the read/write heads.
    There are 28 weak sectors found on the disk surface. They may be remapped any time in the later use of the disk.
    26848 errors occured during data transfer. This may indicate problem of the device or with data/power cables. It is recommended to examine and replace the cables if possible.
    Replace hard disk immediately.
    how can I fix it?
    may drive format (Fdisk) and renewing windows can fix it?
    tanx and regards
    Mohammad

    Hello mohkhosh,
    I see that you're getting an error indicating possible hard driver failure, that you have this message from 3 different sources. I will try to help you with this.
    After reviewing everything  you're looking at needing to replace the hard drive. I would suggest contacting support to see what they can do for you.
    HP Technical Support, North America 1-800-474-6836. For all other regions click here.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • Error occured while reading identity data: failed to decrypt safe contents

    Hello,
    We are trying to access Tibco JMS server through SSL using JNDI lookup. Getting the following error, while executing a sample java file.
    Java Version -
    java version "1.4.2_05"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_05-b04)
    Java HotSpot(TM) Client VM (build 1.4.2_05-b04, mixed mode)
    Please let me know if any of you faced similar issues.
    thanks in advace.
    Following are the error messages.
    javax.jms.JMSSecurityException: Error occured while reading identity data: failed to de
    crypt safe contents entryCOM.rsa.jsafe.SunJSSE_cs: Could not perform unpadding: invalid
    pad byte. at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2699)
    at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
    at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
    at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
    at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
    at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
    at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
    at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
    at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
    at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
    picConnectionFactory.java:84)
    at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
    at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
    ##### Linked Exception:
    com.tibco.security.AXSecurityException: failed to decrypt safe contents entryCOM.rsa.js
    afe.SunJSSE_cs: Could not perform unpadding: invalid pad byte.
    at com.tibco.security.impl.j2se.IdentityImpl.init(IdentityImpl.java:70)
    at com.tibco.security.IdentityFactory.createIdentity(IdentityFactory.java:61)
    at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2680)
    at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
    at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
    at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
    at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
    at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
    at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
    at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
    at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
    at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
    picConnectionFactory.java:84)
    at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
    at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
    Subexception stack trace follows:
    java.io.IOException: failed to decrypt safe contents entryCOM.rsa.jsafe.SunJSSE_cs: Cou
    ld not perform unpadding: invalid pad byte.
    at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.engineLoad(Unknown Source)
    at java.security.KeyStore.load(Unknown Source) at com.tibco.security.impl.j2se.IdentityImpl.init(IdentityImpl.java:66)
    at com.tibco.security.IdentityFactory.createIdentity(IdentityFactory.java:61)
    at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2680)
    at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
    at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
    at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
    at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
    at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
    at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
    at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
    at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
    at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
    picConnectionFactory.java:84)
    at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
    at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
    Caused by: COM.rsa.jsafe.SunJSSE_cs: Could not perform unpadding: invalid pad byte.
    at COM.rsa.jsafe.SunJSSE_al.a(Unknown Source)
    at COM.rsa.jsafe.SunJSSE_ag.a(Unknown Source)
    at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.a(Unknown Source)
    ... 16 more
    Subexception stack trace follows:
    java.io.IOException: failed to decrypt safe contents entryCOM.rsa.jsafe.SunJSSE_cs: Cou
    ld not perform unpadding: invalid pad byte.
    at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.engineLoad(Unknown Source)
    at java.security.KeyStore.load(Unknown Source)
    at com.tibco.security.impl.j2se.IdentityImpl.init(IdentityImpl.java:66)
    at com.tibco.security.IdentityFactory.createIdentity(IdentityFactory.java:61)
    at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2680)
    at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
    at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
    at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
    at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
    at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
    at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
    at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
    at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
    at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
    picConnectionFactory.java:84)
    at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
    at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
    Caused by: COM.rsa.jsafe.SunJSSE_cs: Could not perform unpadding: invalid pad byte.
    at COM.rsa.jsafe.SunJSSE_al.a(Unknown Source)
    at COM.rsa.jsafe.SunJSSE_ag.a(Unknown Source)
    at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.a(Unknown Source)
    ... 16 more

    For the benifit of others.
    The issue is resolved.
    When we set the certificate password inside our application we were encrypting it inside our system.
    When we sent it to tibco we did not decrypt it.
    So the encrypted password was sent as it is that was the issue :(
    Thanks,
    Reflex.

  • Error while executing SSIS package - Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)

    Hi,
    We are getting the following error when running our SSIS packages on Microsoft SQL Server 2012 R2 on Windows Server 2008 R2 SP1:
    Error: 4014, Severity:20, State: 11.   A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)
    SQL Server Data Tools and SQL Server Database Engine reside on the same server.
    We tried the following:
    Disabling TCP Chimney Offload
    Installed Windows Server 2008 SP1
    Splitting our SSIS code into multiple steps so it is not all one large continuous operation
    The error occurs during a BulkDataLoad task.
    Other options we are investigating with the engineering team (out-sourced, so delayed responses):
    Firewall configurations (everything is local, so this should not make a difference)
    Disabling the anti-virus scanner
    Are there other things we can try?
    Any insight is greatly appreciated.
    Thanks!

    Hi HenryKwan,
    Based on the current information, the issue can be caused by many reasons. Please refer to the following tips:
    Install the latest hotfix based on your SQL Server version. Ps: there is no SQL Server 2012 R2 version.
    Change the MaxConcurrentExecutables property from -1 to another one based on the MAXDOP. For example, 8.
    Set "RetainSameConnection" Property to FALSE on the all the connection managers.
    Reference:
    https://connect.microsoft.com/SQLServer/feedback/details/774370/ssis-packages-abort-with-unexpected-termination-message
    If the issue is still existed, as Jakub suggested, please provide us more information about this issue.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Move to new computer, get "An error occurred while reading files or writing files to disc. The disc

    I tried to move my PE6 install and catalog to a new computer.  It was on a Dell Windows XP machine, and I moved it to a Toshiba Windows 7 (64 bit) machine.  I have always kept my photo files on an external hard drive.  My photo library is 50GB, 10,000 files.  Here is what I did.
    Copied the original PE6 install file to the Toshiba.  Installed but didn’t activate it.
    Copied the entire My Catalog folder to the proper Windows 7 location.
    Plugged the external drive into the Toshiba.  Made sure the same drive letter as before (E).
    Fired up PE6 on Toshiba.  Looked good in Organizer.  Everything seemed to be there, but I didn't try to make changes at that point.
    Deactivated PE6 on the Dell.  Activated on the Toshiba.
    Then I realized that it is not right.  I can edit Keywords and Rating stars on the pics, but not dates, captions or notes.  I get “An error occurred while reading files or writing files to disc. The disc may be full or there may be problems with the source media.”
    Only a fraction of the external drive is in use.
    I can access the files on the external drive with another app (Windows Photo Viewer).
    I tried Reconnect All Missing Files.  Somewhat ambiguously, it says “There are no files to reconnect.”
    In the properties in the Organizer for each picture are the proper file names and paths.  Folder view works fine in Organizer.
    I can put new files in the same external drive directories, import them into PE6, then edit them normally.
    What is the easiest way to get Organizer properly connected to my files?  I suppose I could reimport all the pics on the new machine, but I assume I'd lose some of my metadata.  So that is out of the question.
    Thanks,
    Bill

    Are you sure that file paths are correct? I say this because under XP they would have originally pointed to Documents & Settings/My Pictures whereas on W7 it will be User/Pictures, albeit you are using an external hd.
    Take a look at this knowledge base note on the correct procedure for back-up and restore.
    I think writing metadata to files for such a large catalog will be a thankless task.
    http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html

  • I am trying to create a community addition, but just keep getting *Error occurred while saving your data.

    I am trying to create a community addition, but just keep getting   *Error occurred while saving your data.
    Trying to add the following community addtion for:     http://technet.microsoft.com/en-us/library/cc755631(v=ws.10).aspx
    In the above website do NOT copy the command, you have to type it in.  Webpage Error.
    You can use both    dsquery server –hasfsmo schema    and    dsquery server -forest –hasfsmo schema
    The problem is, I believe, a hidden character in the command on this webpage which follows the Paste function and results in the error Unknown Parameter error.

    Hi John,
    You might have better luck posting this in the library feedback forum here:
    http://social.msdn.microsoft.com/Forums/en-us/home?forum=libraryfeedback&filter=alltypes&sort=lastpostdesc
    It seems odd to me that the TechNet library feedback forum lives under the MSDN branding, but that seems to be the case.
    Don't retire TechNet! -
    (Don't give up yet - 12,575+ strong and growing)

  • When trying to sync my iPad I am getting a message stating " iTunes could not connect to the iPad "iPad" because an error occurred while reading the device

    When trying to sync my iPad I am getting a message stating that iTunes could not connect to the iPad "iPad " because an error occurred while reading from the device

    Hi Centreless,
    If you have difficulty with your iPad not being able to connect to iTunes in order to sync, you may want to try the troubleshooting steps in this article -
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Error while deploying an application on weblogic 12c. An error occurred while reading the deployment descriptor. The error was: Error processing annotations

    Anyone please help me solve this error. I am trying to deploy an application on weblogic 12c  i am getting an error but the same application gets successfully deployed on weblogic 11g. The error is
    An error occurred during activation of changes, please see the log for details.
    Exception preparing module: EJBModule(gsCallbackAdapterLGTX-ejb.jar) An error occurred while reading the deployment descriptor. The error was: Error processing annotations: .
    [EJB:015001]Unable to link class com.aep.gridsmart.adapters.lgtx.buslogic.deliver.xform.AdapterTransfomerDeliverSession in Jar /appl/oracle/middleware/WLS/12.1.1.0/user_projects/domains/Gridsmart/servers/ManagedServer1/tmp/_WL_user/gsCallbackAdapterLGTX/34vz4d/gsCallbackAdapterLGTX-ejb.jar : java.lang.NoClassDefFoundError: com/aep/gridsmart/adapter/deliver/CommonAdapterDeliverBean

    Cotton please let me know what is the mistake i am
    doingThe following path does not exist.
    C:\Sun\AppServer7\domains\domain1\server1\
    applications\j2ee-modules\task_1\WEB-INF\web.xml

  • "error occured while reading from device"

    when trying to sync our itouches the device is initailly recongnized in itunes and will begin to sync , but never gets through the whole proccess - each time it gets to a different step, but always ends with error message "ipod cannot sync as an error occured while reading from device" or something close to that...any ideas or help please....
    i have checked the usb drivers...uninstalled and reinstalled itunes and removed the security software that I can find....

    It could be to either a problem with a "file" that is either one the iPod or on the computer that is trying to be read for syncing. I would in order:
    - Reset the iPod:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod via iTunes. First from backup then to factory defaults/new iPod.

  • Error 4014 Severity 16 State A fatal error occurred while reading the input streamfrom the network

    We encounter following error intermittently Error 4014 Severity 20 State 16 , A fatal error occurred while reading the input stream from the network
    I have checked the RING_BUFFER_CONNECTIVITY from sys.dm_os_ring_buffers, we are able to find the remote_host IP where connections are being closed/killed, the error being logged in sys.dm_os_ring_buffers, comes from multiple remote_host, we have raised
    to O/s and Networking Team they seem to have no clue, why this error occurs
    Server: Virtual Machine
    Operating System: WINDOW 2008 R2 SP1
    MSSQL 2008 STD ED SP3 10.0.5850.0
    Database mirroring is configured for the application database.
    Antivirus enable on the database server
    How do we find the cause for this error being logged in SQL server logs, is this error due to SQL database mirroring or memory issue?
    What needs to be checked on the O/s and Network, I have been checking on the internet and everywhere it is pointing to NIC drivers or security patches
    Also in the system events following error was being logged, but after restarting the vm service this error has not re-occurred
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the VMTools service
    Kindly suggest on Error 4014 Severity 20 State 16, A fatal error how to resolve
    [email protected]

    Hello,
    Could you try to use Network Monitor or WireShark to examine if the connections resets are coming from a client computer
    or from the host where SQL Server is installed?
    Network Monitor can be downloaded from the following link:
    http://www.microsoft.com/en-us/download/details.aspx?id=4865
    If you use Network Monitor trace you will identify connection resets by looking for “TCP: Flags=,,R.A” at the description column on the Frame Summary. Once you find the flag, the Source column will tell you the identity of the host resetting the connection,
    maybe is not the SQL Server host.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Error message, what does this mean: Itunes couldnt connect because an error occured while reading from the devise?!?!?! HELP

    I'm trying to connect my iPAD to my desktop but I receive an error: itunes couldnt connect because an error occured while reading from the devise?!?!?! HELP

    have you done a update for your itunes this can be the problem that it will not connect to you ipad so update you itunes and then try it again

  • HT4528 I can't seem to sync my iPhone with iTunes.  I keep getting this message:  iTunes could not connect to the iPhone because an error occurred while reading from this device.  What can I do?

    I can't seem to sync my iPhone to my computer; I keep getting this message:  "iTunes could not connect to the iPhone because an error occurred while reading from this device."  I get the same message with my iPad, even though they all share the same account.  What can I do?

    This could be caused by a USB connection issue. Make sure the iPhone is directly connected to the Mac using the USB cable it came with. Also, try disconnecting all other USB devices.
    If you haven't already try resetting the iPhone by holding the Home and Sleep/Wake buttons until you see an Apple logo as described here:http://docs.info.apple.com/article.html?artnum=305743

  • Error occured while reading from the device

    I need help!!! whenever i try to update my iphone to the new 1.1.1 version, i get an error message saying "error occured while reading from the device" the same message comes up when i try to restore it. i havent mod'd my phone in any way. does anyone know whats wrong or how to fix it?

    I have the same problem. Was a solution ever given ?

  • "An error occurred while reading the configuration"

    I updated my Time Capsule (1tb, old) with the new software last night (to 7.4.1 from 7.3.2). The upgrade process seemed to work fine. I then tried to go into the TC with Airport Utility 5.4.1 and when I click on the TC, I get a message that says, 'An error occurred while reading the configuration. Make sure your Apple wireless device is plugged in and in range of your computer or connected via Ethernet and try again. (-5). I've rebooted the TC. I have plugged into it directly.
    It now asks me for my password. I type it in and then I get the message. Any suggestions? Downgrade? Re-run the upgrade? Reset the TC?

    foohan,
    I had this same error, and I did have to reset (hold down the reset button for 5 seconds) my AirPort Extreme and Time Capsule to get past it. I noticed two things, though.
    1. If I tried to connect to my Time Capsule from Finder, I got an error. But if I clicked the "Connect As" button, it asked for my password again, and I could get to all of my files to back them up.
    2. All of my files were still on my Time Capsule after I reset it. I use it for remote file storage, not Time Machine, so I can't tell you if Time Machine backups will pick up where they left off.
    Hope this helps.

  • Error Message: An error occurred while reading files or writing files to disc...

    Why am I getting the following error: An error occured while reading files or writing files to disc.  The disc may be full or there may be a problem with the source media.  I am running PSE10 on a iMac using OS X 10.7.3, my Mac has a 1TB hardrive of which about 150GB is used.  I get this error when trying to delete a file out of the Organizer.  The software worked fine until I installed it on my laptop, also a Mac, and tried to share files.

    Hmm. What happens if you disable sharing, just as a test?
    I don't think you can share organizer photos that way, since your versions don't really exist as images, just as a set of directions to organizer for recreate that state of your editing when needed, and you can't run organizer on a network drive, which is pretty much what you're trying to do if you mean you have PSE installed on the other computer and are tryng to use the same catalog for both.

Maybe you are looking for