RSOP access deny - Windows 2003

Hi all,
I have configured a GP for System Services. I linked this GP fro a specific OU only. the system in that OU has successfulyl applied the GP settings with no errors, but when I run gpresult or RSOP.msc the error is Access denied. the actual error displayed is give below,
GPRESULT:
ERROR: Logon Failure: Uknown user name or Bad password
RSOP.msc:
Group Policy Error: You do not have permission to perform this operation
In event viewer when I run GPUPDATE the operation was succeeded;
"Security policy in the Group policy objects has been applied successfully" Event id: 1704
following this event there were 1 other error event;
"Windows couldn't log the RSoP (Resultant Set of Policies) session status. An attempt to connect to WMI failed. No more RSoP logging will be done for this application of policy." Event id: 1090
Can anyone help me to resolve this. I know I am missing on security permissions, but what is it and wht I was missing?
Regards
Hari Vidya Sankar

Hi,
Please perform the following steps:
1. Logon the machine with a domain admins.
2. Open and command prompt, and type the following commands:
1)    cd %systemroot%\system32
2)    regsvr32 /n /I userenv.dll
3)    cd wbem
4)    mofcomp scersop.mof
5)    mofcomp rsop.mof
6)    mofcomp rsop.mfl
3. Restart the winmgmt service.
And then, check if the issue is resolved.

Similar Messages

Keep getting an access denied window when trying to print to PDF with Adobe Acrobat X with any prgram/internet except for adobe programs

I am trying to print to PDF from Word, Revit, Firefox and all have given me a Access Denied window popup and would cancel the print. I have Adobe Acrobat X and Creative Design Suite 6.

So you are trying to print to the Adobe PDF printer? What is the full statement of the error (typically it indicates a folder or such does not allow access)? If you open Distiller, are there settings files available that you can view?
In the print menu, select print to file. Then open this file in Distiller. What happens with these two steps and do you get a PDF after the second step?

When using Get Others to Sign i get an access denied window associated with my Adobe ID

Can someone please help i get an access denied window when trying to send out a form to have signatures added. It seems to be associated to Adobe ID, can someone please point in a direction to fix this.

Did you create a NEW Apple ID or did you change the email address for your OLD Apple ID? This will affect how you update apps in the future.
Anyway, go to Settings/iTunes&App Stores, log out, then log in with the new ID.

Is it possible to access the Windows 2003 guest VM from the VM Server?

Hi,
I have only one physical machine. I install VM server and VM Manager (using the VM Manager template) on the same physical machine. Then I create aa guest VM for Windows Server 2003. Can I run Windows Server 2003 in GUI mode like guest VM using VMWare Workstation? This setup is strictly for learning and I don't want to get another PC in order to access Windows 2003. If it is possibl, what other software must I install on the VM Server (Dom0) in order to for this to work?
Thanks for your assistance.
Phil

djplee88 wrote:
Can I run Windows Server 2003 in GUI mode like guest VM using VMWare Workstation? No, you can't. There is no way to show the GUI of a guest from the console of Oracle VM Server. You will need another machine.

2008 R2 printer server, cannot connect to printer, access denied, Windows 7 OS only

Deployed new Windows 2008 R2 domain controller, added print and document controll. Added several network printers on R2 server. We currently have mostly Vista biz clients but half a dozen W7Pro clients also. The Vista clients connect to these new network
printers, no problem but none of the W7 clients will connect. I select the printer from the drop down directory list and select to load the drivers, the system starts loading drivers and then right before it finishes it stops with error message, "Windows cannot
connect to the printer. Access denied. Again, this happens only with the W7 clients on our domain, Vista works fine.

By default, the security settings for Windows 7 and Server 2008 R2 allow users who are not members of the local
Administrators group to install only trustworthy printer drivers, such as those provided with Windows or in digitally signed printer-driver packages. You may want to install printer-driver packages on the print server
or in the clients. More details can be found this page: Cannot
connect to printer, Access denied -
http://www.chicagotech.net/server/print3.htm
Bob Lin, MS-MVP Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.howtonetworking.com

Clean Access and Windows 2003 Server

I am trying to install the Clean Access Client on a VM running Windows 2003 Server. When I connect to our customer's network the VPN client appears to connect properly and I see the Clean Access window. Then it all seems to fall over. My customer tells me I should see a blue window with a red OK button on it but I never see it. As a result I never get completely into the network. Is this because I am running this on Windows 2003 Server or should I be looking at something else? Can this run in a Virtual Environment and on 2003 Server?

I work it out partially by myself:
1)
(excuse me, I meant "kinit and Krb5LoginModule" not "kinit and kinit.exe").
Krb5LoginModule seems to work now (with TCP). The output is:
KRBError:sTime is Tue Jun 01 17:13:51 CEST 2004 1086102831000
suSec is 945761
error code is 52
error Message is Response too big for UDP, retry with TCP
realm is SSOTEST.RTC.CH
sname is krbtgt/SSOTEST.RTC.CH
KrbKdcReq send: kdc=rtcnt978.ssotest.rtc.ch TCP:88, timeout=30000, number of retries =3, #bytes=232
DEBUG: TCPClient reading 1496 bytes
KrbKdcReq send: #bytes read=1496
KrbKdcReq send: #bytes read=1496
EType: sun.security.krb5.internal.crypto.DesCbcMd5EType
KrbAsRep cons in KrbAsReq.getReply sso_testuserCommit Succeeded
Which is what I want (it tries first with UDP, then the KDC says the TGT is too big for UDP and the client tries again with TCP)
2)
I still have the error :-(

Accessing a Windows 2003 Server

Hi; this question may have been dealt with already but I'm new here so please indulge me a bit. My office network runs on windows 2003 file server but I just got myself a MacBook Pro. I can see the file server but can't access it. I have MS Office for Mac 2004 installed (Student edition)
Should it be possible for me to access files on a file server that runs on windows 2003 server? If yes, what do I need to do on either my Mac or ask the admin to do on the server?
Cheers

I'm also running several Macs on a Windows Small Business Server (Windows Server 2003) and the only way I am able to pull up the files was to join each one of my Macs to the Windows Server's network domain. You have to do this through the Directory Utility in the Utilities folder. There is one draw back from what I can tell, and it's something that I need some help with. It seems that once a Mac (running Leopard) is joined to a Windows domain, it takes the log in process forever to finish. Logging into a Leopard Mac alone is pretty quick, but after joining the domain, logging into any of the Macs on the Windows domain takes over a minute. If anyone knows the answer to this one, I'm all ears.

Could not access to Windows 2003 DC. Servers resources.

Hi, I got only 1 PowerBoob G4(Max OS X Tiger 10.4.5)in WindowsSBS 2K3 domain. At PowerBook, I can see all servers, computers on the domain and other workgroup. I also can signon and access to domain computer member (by domain member account) and workgroup Windows 2003 server resources (by this server user account). But the main thing that Windows SBS and Std 2K3 DC. domain servers, this PowerBook could not log on to connect with common error:"The alias 'servername' could not be opened, because the original item cannot be found". The PowerBook get DHCP IP from SBS DHCP and get out to internet. No problem for me to ping from PowerBook to domain servers address, and its even resolve the right server name.
Would you help and give me any guide I can fix this.
Thanks and Regards,
Tony

Hi Brian,
I found out on the link: http://www.macosxhints.com/article.php?story=20030922153448490
and do the disable both Microsoft Network Server: Digitally Sign Communications (always) and (if client agrees)will fix this case.
Also by Microsoft support, after above step, check and make sure the value of the fowllowing keys is all set to '0' on the SBS Server:
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters\enablesecurity signature
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters\requiresecurit ysignature
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Services\lanmanworkstation\parameters\enablesec uritysignature
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Services\lanmanworkstation\parameters\requirese curitysignature

App-v 4.6 Q: drive "access denied" Windows 7 SP1

I'm troubleshooting an app-v application in windows 7
I've customize the osd file to start with cmd.exe
On the commandline (which is in the bubble) i'm trying to access the Q: drive but I get access denied.
I've never experienced this in windows XP
Anybody familiar with this problem, or is my windows 7 image the problem?
security discriptor is off
Using app-v 4.6 SP2, also tried without SP

Try launching CMD with the SFTTRAY command instead: http://stealthpuppy.com/app-v-faq-27-how-do-i-get-an-application-into-the-app-v-bubble-for-troubleshooting/
E.g:
SFTTRAY /EXE cmd.exe /LAUNCH "WinMerge 00000010"
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com |
The Definitive Guide to Delivering Microsoft Office with App-V

Slow connection with OS X 10.7 while trying to access a Windows 2003 server

Good afternoon:
I am a systems engineer in an enterprise environment that is now deploying Macs and I have been finding that the Macs have a very slow connection to the Windows 2003 server; even after installing all necessry components.
All of the Macs access network services via Active Directory
The issue is the connection speed when trying to access folders on the servers.
Does anyone have any ideas as to speed up this connectivity issue?

Did you resolve this issue? Any links to anwers to this?
thank you.

Access Denied Windows XP SP3

Every time I try to reinstall the bluetooth adapter its shows it copying the driver to the drivers folder in the animation but it stops and says access is denied.

This is kind of annoying because I now have no right click and cant use bluetooth to install my mighty mouse anymore.

Windows 2008 R2 SP1 (64bit) shared folders no longer work with Windows 7 Pro but do work with WindowsXP & Windows 2003

As of last week, our Windows 7 Pro workstations can not map or browse the Windows 2008 Server shares. They can ping the Windows 2008 server. The Windows 7 Pro machines can still access the Windows 2003 Server Shares. The older workstations running Windows
XP can still map to the both the Windows 2003 & Windows 2008 Servers. All the servers can browse to each others shared folders (2 windows 2003 server & 1 windows 2008 server).

Ok, now you're down to network or permissions issues. An unedited ipconfig /all
of server and problem workstation may help. You could also try setting up some auditing.
https://technet.microsoft.com/en-us/library/dn311489.aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Cannot establish a link between MacPro and Windows 2003 Server

I just had an issue where we had a server crash. This server supports several PCs, as well as two Macs. The server has been brought back online and can communicate with all of the PCs. However, neither one of the Macs can now communicate with the server.
When I try to connect through the sidebar in the finder window, it will bring up the authentication window. But after I type in my password and hit enter, it gives me the message, "The alias "" could not be opened because the original item could not be found."
When I try to connect through Go>Connect to Server, it gives me the message, "The Finder cannot complete the operation because some data in "" could not be read or written (Error code -36).
My IT guy says that everything is alright with the server and that the problem has to be in the Mac settings. He does not know anything about Macs, however.
Can somebody help me out with this issue?

The only thing that comes to mind is a few settings in the Security Options of the Local Policy. Here's a link:
http://allinthehead.com/retro/218/accessing-a-windows-2003-share-from-os-x
Not sure if that's it, but I hope it helps.

Managing event viewer remotely in windows 2003

Same user is configured as administrator on all the servers in one domain at windows 2003 server. However, the account is not
the domain admin. Can security logs be managed or cleared remotely from any of these servers? Will this require any specific configuration?
dhomya

Hi,
So you want to give Non-Administrator users access remotely to Event logs if the Servers or DomainControllers they are accessing are Windows 2003?
If yes, i think you could refer to:
Giving Non Administrators permission to read Event Logs Windows 2003 and Windows 2008
http://blogs.technet.com/b/janelewis/archive/2010/04/30/giving-non-administrators-permission-to-read-event-logs-windows-2003-and-windows-2008.aspx
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Internal failure 0x80040707 access denied

Sorry to bring up an old topic problem, but the search turns up posts dating back to 2004 and the links do not work. Anyway...
I get an "internal failure 0x80040707 access denied" upon loading iTunes and QuickTime after the required reboot either with the CD or with the downloaded versions from the web.
I did not connect the Ipod to the computer until after the software was installed.
I have tried all the below with Norton Antivirus disabled:
1) upgraded XP Pro from SP1 to SP2.
2) installed and uninstalled iTunes and QuickTime many, many, many, many times, using the uninstaller and the Windows Install Clean Up downloaded from
http://consumer.installshield.com/kb.asp?id=Q108322
and using task manager to remove remnants (qttask.exe, ip*, qt*).
3) followed the instructions at
http://consumer.installshield.com/kb.asp?id=Q108167
there were no problems with the registry.
4) installed only the iPod updater and not installed iTunes and QuickTme from the CD (nothing works, but I still get the error message on reboot.
5) deleted the folder containing iPod and QuickTime after an unsuccessful install.
iTunes runs after the reboot, but in preferences it says no iPod is connected when it is connected. The iPod when connected to the 'puter says "Do not disconnect" with a spinning "sun" in the upper left hand corner. The do not disconnect never goes away, even after leaving it alone overnight.
Windows knows the Ipod is connected to a USB port and says it is "working normally."
QuickTime will play "stuff."
I spent 40 minutes on the phone with Best Buy who said to call Apple. I spent 20 minutes on the phone with Apple who said call Dell. I Spent 15 minutes on a chat with a Dell tech who ended the conversation with out giving me any help (was goin' home time for him).
I've probably got about 30 hours into this and my kid is wondering when her iPod will work.
Any advice or pointers?
Thanks for any suggestions!!!
Jim
dell Windows XP Pro 4300s

Katrina,
Maybe this?
http://discussions.apple.com/thread.jspa?messageID=135
1909?
I don't know how to do this as the message occurs when I reboot and before my desktop icons are loaded. The first window that appears is the InstallShield completing the software load, I guess. Then the "internal failure error 0x80040707" window appears. At that point my only choice is to click "OK" or "X" on the Internal falure window. After that disappears the "access denied" window pops up. The Taskbar is not loaded either.
Or you can make sure your music files are backed up
and in a safe place, and go through your PC and
remove anything that says Apple on it. In both
Windows Explorer & the registry.
Then reinstall iTunes, QT and the iPod updater?
Also, just curious, you said you installed the iPod
updater, but did you also run the updater with the
iPod attached and actually update the iPod?
No. The updater window appears and the initializing message never goes away (the iPod is connected with the "do not disconnect" messge displayed.
Thanks for your help!!
Jim
dell Windows XP Pro 4300s
dell Windows XP Pro 4300s

RSOP access deny - Windows 2003

Similar Messages

Maybe you are looking for