RSP- Fail to connect SAP Portal
Good morning...
Hopefully you can help me....
I need to download new tasks from RSP task: System task to retrieve tasks, but I can't do it, cause it shows me : Fail to retrieve tasks on back-end. I don't know what does it means...
I checked and had test e-mail connection and the result was ok. Data base connection either.
But, when I try to connect on SAP channel from RSP, the following message display: Fail to connect to SAP channel...
Some help?
Regards...
Hi Seth...
Thanks for answer...
Yes...I've imported it...
I upgraded it to PL05 too...And tried again, but by using another S-user.
I know if I can't connect to SAP channel, I can upload new tasks...But I still can't do it...
Wait for news...
Regards...
Valter Martins da Silva
Similar Messages
-
SAP_CMINIT3 : rc=20 Connect to SAP gateway failed when connecting SAP CR
Dear SAP Gurus,
I have the follwowing issue when I try to access SAP Crystal Reports 2011 on my desktop.
I can access the SAP ERP 6.0 back-end system without problem, but when I try to connect to SAP Crystal Reports, as soon as I enter my login details, I get the following error message:
Logon Failed.
Details: SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=192.12.353.12, GWSERV=sapgw00, SYSNR=00
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 192.12.353.12:3300' not reached
TIME Thu Oct 27 12:02:17 201
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10060
ERRNO TEXT WSAETIMEDOUT: Connection timed out
COUNTER 3
I can login to SAP Crystal Reports using other desktops, but cannot access using my own. This is the same for other people, they also cannot access using my desktop.
Thanks in advance, MarcHI Mark,
Are you and Ramish working together?
See this post for your answer: Connection keeps failing
Don -
SAP Portal accunts with special characters fail on reconcile
We connect to the SAP Portal System via the com.waveset.adapter.SAPPortalResourceAdapter in an IDM 8.0.0.5 system.
On the SAP side the IDMService.par is running.
When we do a reconcile we fail with an error message.
We activated the error logging on SAP system and the logfile on SAP and IDM reads like this:
#com.sap.portal.idm_logger#sap.com/irj#com.sap.portal.idm_logger
#CPIC_IDM_EP#
#Info##Plain###got user with uniqueId USER.PRIVATE_DATASOURCE.un:köhler#
It looks very much like a character set problem but in which system?
Does anyone have a hint for me on how to configure SAP so that we get:
- more detailed information on the root cause of the problem. e.g. enable a more detailed logging on SAP*
- SAP to send UTF-8 encoded data only.
Does anybody had a problem like this before? It would help if we would know that we are not alone :-)
Any help is very much apprechated !
UgatoWe got an E-Fix and its working now.
-
Connect the portal to backend SAP R3 system which is on VPN
Hi All,
I have install local portal on my machin & trying to connect the SAP R3 to backend.
But I am accessing SAP R3 through VPN.
So I am getting connection failed.
Can u please suggest me some other way to connect SAP R3 backend system though VPN?
Usefull answer wil be awarded.Hi nilima,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ac81c690-0201-0010-c4b4-c72618f3590d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9a3cc590-0201-0010-bcb9-ab2ef5673287
and also your other thread.
PradeeP -
Failed to start dependent service com.sap.portal.usermapping
Hi
I am trying to retrieve the User mapping information from my Webdynpro application. I added PORTAL:sap.com/com.sap.portal.usermapping to my service references in the web dynpro application. However, I am getting an error while deploying the application. The error message says
Failed to start dependent service ''com.sap.portal.usermapping'' of application ''local/materialtemplateapp''. Status of dependent component: STATUS_MISSING. Hint: Is the component deployed correctly on the engine?
I know this is a pretty old problem that many other Web Dynpro developers encountered. I searched a lot on the forums and SDN. There are similar posts but I didn't find solution. I would appreciate any help in fixing this problem.
ThanksHi,
Goto http://<servername>:<port>/webdynpro/welcome-->content Adminsitration
Now, expand sap.com and search for the usermapping service. Check what is the status of that particular service. If its in the stopped state then start it and try redeploying your application.
Regards,
Murtuza -
How to connect SAP R/3- System with SAP NetWeaver Portal (2004s)?
Hello to all,
sorry, can someone help me? How can I connect SAP R/3- System with SAP NetWeaver Portal (2004s)?
Thanks and regards,
GalynaHi,
In previous link contain this info
This describes how to connect an SAP R/3 system to SAP NetWeaver Portal using an iView
1) Go to System Administration
2) Go to System Configuration
3) Go to Portal Content (Right Side Panel), open that folder.
4) Right Click on Portal Content, a Panel is displayed select "System (from Template)".
5) That will display a new view on right side, now select "SAP system using dedicated application server" from
the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
For this exercise, we'll use the simplest type.
6) Choose next
7) Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
about the system then give them in the "Description" field.
8) Open the Newly Created System.
9) Now when you want to create a New System, you have to fill four Properties they are:
"Connector" - contains basic connectivty details
"Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
"Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
"User Management".
You also need at least one "System Alias" has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
10) Select "Connector" property, now fill the required fields such as:
a) Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
it will open a window which has the Application Server Name.
b) Logical System Name - Give the logical name as defined in the backend system
c) SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
d) SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
e) System Type* - Since we are connecting to R/3, select SAP_R3 system.
f) System Number - This is a two digit number that you can find in the SAP Logon Pad
11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
a) ITS Description à Give some Description
b) ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
c) ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
Transaction Code "SICF", it opens a new window go to:
default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
d) ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
visible when you opened "Test Service" window.
12) Select "Web Application Server" property , now fill the required fields like
a) Web AS Description -> Give some Description
b) Web AS Host Name - same as ITS Host Name
c) Web AS Path - usually /sap/bc/bsp/sapd)*
Web AS Protocol - should be same as the ITS Protocol.
13) Select "User Management" property, now fill the required fields like
a) Authentication Ticket Type - Since we are not using SSO leave the field
empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
b) Logon Method - Select UIDPW.
c) User Mapping Type - In case you have administration rights then you choose "admin" or in case you
just have user rights then choose "user", better go for "admin/user".
14) Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
15) Now that System is created we have to create a iView which will display the given Transaction Code.
16) Go To "Content Administration".
17) Go To "Portal Content".
18) Go to Portal Content (Right Side Panel), open that folder
19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
20) Select iView template, click next
21) Select "SAP Transaction iView" from the list of templates available. Click next.
22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
23) Select "SAP GUI for HTML" radio button. Click next
24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
25) Now Preview the iView
26) You will see a new Window where in SE12 Dictionary Display window is displayed.
Regards,
Senthil K. -
Connect SAP R/3 to Portals
Hi,
Need help creating a connection to SAP R/3. Firstly,
Can we use EP to connect to R/3 4.6C version ?
I have the following paramters when I create a SAP system in 'System Landscape' in EP. I dont see an entry for client, host, user, app server etc..Where do we maintain these? Appreciate yr help..
*******************parameters in SAP system***
Admin User ID
Application Host
Catalog Administration Description
Catalog Administration Host Name
Catalog Administration Path
Catalog Administration Protocol
- Select -httphttps
Catalog Administration Relative Path
Changed By
Collection
com.sap.portal.pcd.gl.DeltaLinkState
com.sap.portal.pcd.gl.xfs.dl.IsDeltalink
Yes
No
com.sap.portal.pcd.gl.xfs.dl.TargetUrl
Created At
Created By
CVIEWS Description
CVIEWS Host Name
CVIEWS Path
CVIEWS Protocol
- Select -httphttps
CVIEWS Relative Path
Description
Text changes only affect the original language of the object
Domain
DRS Description
DRS Host Name
DRS Protocol
- Select -httphttps
Enable Session ID Sharing
Yes
No
Enable URL Rewriting
Yes
No
FSCM Description
FSCM Host Name
FSCM Path
FSCM Protocol
- Select -httphttps
FSCM Relative Path
Gateway Host
Gateway Service
Host Name of Crystal Enterprise Server
ICSS Description
ICSS Host Name
ICSS Path
ICSS Protocol
- Select -httphttps
ICSS Relative Path
ISA B2B Description
ISA B2B Host Name
ISA B2B Path
ISA B2B Protocol
- Select -httphttps
ISA B2B Relative Path
ISA B2R Description
ISA B2R Host Name
ISA B2R Path
ISA B2R Protocol
- Select -httphttps
ISA B2R Relative Path
ISA HOM Description
ISA HOM Host Name
ISA HOM Path
ISA HOM Protocol
- Select -httphttps
ISA HOM Relative Path
ITS Description
ITS Host Name
ITS Path
ITS Protocol
- Select -httphttps
Last Date Changed
Logical System Name
Logon Method
- Select -SAPLOGONTICKETUIDPWX509CERT
Master Language
Object is a Template
Yes
No
Object Type
Path of Crystal Enterprise Server
PCD Location
Protocol of Crystal Enterprise Server
- Select -httphttps
R/3 Reference System
- Select -01
Remote Host Type
- Select -32E
SAP Client
SAP System Name
SAP System Number
Server Port
Session Cookie Name
Session URL Name
Shared Catalog Description
Shared Catalog Host Name
Shared Catalog Path
Shared Catalog Protocol
- Select -httphttps
Shared Catalog Relative Path
Shop Administration Description
Shop Administration Host Name
Shop Administration Path
Shop Administration Protocol
- Select -httphttps
Shop Administration Relative Path
SNC Library Path
SNC Mode
- Select -01
SNC Name
SNC Partner Name
SNC QOP (Security Level)
- Select -0123456789
System Template Name
System Type
- Select -SAP_R3SAP_BWSAP_CRM
Trace Mode
- Select -01
User Administration Description
User Administration Host Name
User Administration Path
User Administration Protocol
- Select -httphttps
User Administration Relative Path
User Mapping Fields
User Mapping Type
- Select -useradminadmin,user
WAS Description
WAS Host Name
WAS Path
WAS Protocol
- Select -httphttps
WFM CS Description
WFM CS Host Name
WFM CS Path
WFM CS Protocol
- Select -httphttps
WFM Description
WFM Host Name
WFM Path
WFM Protocol
- Select -httphttpsHi Srini,
Assuming you are using a dedicated connection string follow the steps below.
Please assign points if this helps.
Regards
Daniel
Create new system in system landscape editor using;
SAP_R3_Dedicated option,
Assign system details to iView,
Click finish then open object for editing,
Change property category to connection,
Enter application host details (use FQDN),
Enter Client (300),
Logical System Name,
Server Port(3200),
Save,
Now select UserManagment,
Enter User\Admin pwd details,
Save,
Now select Edit "System Alias" option,
Enter a system alias.
You can test this through System Administration>Support>SAP Applications>SAP Transaction
or you can create a new iView in Portal Content that utilises the System via the alias.
Note - be sure to enter the correct usermapping details! -
Fail to connect to SAP in external Programs
Hi.
In PowerBuilder and Visual Basic, Somepeople fail to connect to SAP. The Error Message is below.
I don't know the reason. Both connected man and unconnected man use the same program and sap gui( installed componets are same).
best regards,
kil-nam.
== Error Message ==
ERROR file opened at 20060724 194308 Republic of Korea Standard? SAP-REL 640,0,55 RFC-VER 3 717389 MT-SL
T:2096 ======> Connect to SAP gateway failed
Connect_PM GWHOST=165.243.210.70, GWSERV=sapgw00, ASHOST=165.243.210.70, SYSNR=00
LOCATION CPIC (TCP/IP) on local host
ERROR connection to partner broken
TIME Mon Jul 24 19:43:08 2006
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -6
MODULE ninti.c
LINE 756
DETAIL NiPRead (165.243.210.70/3300, hdl 1)
SYSTEM CALL recv
COUNTER 3Eyal H wrote:
Hi,
I try to connect between WebLogic6.1 + Apache1.3.19. (I checked on the BEA
site that this Apache is supported.)
I managed to run successfully the apxs and httpd.conf looks like this:
LoadModule weblogic_module libexec/mod_wl.so
AddModule mod_weblogic.c
(The AddModule mod_so.c line is present and also httpd -l shows mod_so.c in
its list as it should.)Seems to be fine..., but
>
WebLogic started successfully, but I get a warning msg when I start the
Apache:
[Sun Apr 21 14:17:41 2002] [warn] Loaded DSO libexec/mod_wl.so uses plain
Apache 1.3 API, this module might crash under
EAPI! (please recompile it with -DEAPI)that means you have to use the module compiled with the EAPI switch. Bea
delivers the following modules:
Standard
mod_wl.so
Apache w/ SSL/EAPI mod_wl_ssl.so
You must use mod_wl_ssl.so with an EAPI Apache!
Hope this helps,
schnaggy:-) -
Fail to connect DB via DI-API on SAP Business One 9.0 for HANA
Hi,experts.
I am coding a sample program using VB.net on SAP Business One 9.0 for HANA.
But this problem fail to connect DB.
The code relevant to connect DB is below.
============================================-
SAPbobsCOM.Company.DbServerType = 6
SAPbobsCOM.Company.Server = ServerName:30015
SAPbobsCOM.Company.UseTrusted = False
SAPbobsCOM.Company.DbUserName = SYSTEM
SAPbobsCOM.Company.DbPassword = ********
SAPbobsCOM.Company.CompanyDB = CompanyDBName
SAPbobsCOM.Company.UserName = manager
SAPbobsCOM.Company.Password = ********
' Connecting to a company DB
RetCode = SAPbobsCOM.Company.Connect
============================================
(Result) RetCode = False
(Expected result) RetCode = True
I think this is a commonly difinition on SAP Business One for HANA.,
but I can not find any useful information...
Could you give me advice about this problem?
Best regards,
Yuka MasudaThank you for your reply, Maik.
I changed DbServerType from 6 to 9,
and the program works!!
I appreciate your useful information.
Thank you.
Best regards,
Yuka Masuda -
Hi
I am getting this error for some users in the portal.
com.sap.portal.connectivity.destinations.PortalDestinationsServiceException:User is missing credentials for connecting to alias SAP_R3_humanResources.
This is only happenning for some of the users at the moment and I cannot figure out what is causing it.
We have:
EP7 for Online Expenses
ECC6
I have re-registered the WebFlowConnector just to see if thats the problem.
I have checked the users portal roles and his backend roles and all are OK
I have also checked the Web Dynpro connector for SAP_R3_HumanResources.
Can anybody help me out on this please.
Many Thanks
SteveGot this from SAP
1st reply
The UWL_service was introduced in NW 700. So, 1133821 will not be relavant for NW 6.40. However, in 640 system we use Basis plugins.
So, to check that please provide me the complete backend system version. The UWL uses functions from the Basis plug in instead of the Enterprise Portal plug in (WP-PI 6.0) for back end systems using Release 640. Support Package 12 makes the necessary functions available in the Basis. You can make the necessary changes in the Basis plug in (PI_BASIS) using notes or Support Packages.
Could you please check which release are you on? Remember after you applies this (SP12), you will need to reregister the UWL system in the system admin on the portal. *This is not only for substitution, but for other functionality as well* We recommend this for 640 systems in general that the PI_BASIS is maintained at the highest level.
This warning message will occur for users that do not have access to the systems that are configured in the UWL UI. For example, if we have 1. BW system 2. SRM system, and you 'steve', are able and have access to the BW system, but do not have a Userid in SRM backend, you will receive this msg. This is normal behaviour for the Universal worklist. So your option there would be to create a dummy id for you on the backend system so that your id can connect but that you don't have auth to.
2nd reply
You seems to be on lower version for Basis Plug-ins. The basis plug in should be at version 12 or higher and is at version 9. You will need to ensure that the users exist in both systems to get rid of the warning messages. Details for the Basis Plug-ins can be found on Note:883558.
3rd reply
If I am right then you are talking about the solution provided to get rid of the warning message.
So, in this regard as Steve already mentoned The Portal is an EP7 portal running on NW 7.0 SP20. It has to connect to {2 different R3 backends}.
1. ECC 6 running on NW 7.0 and UWL is configured with a SAP_ECC_TRAVEL WebFlow Connector (this works perfectly)
2. ECC 5 running on NW 6.40 and UWL is configured with a SAP_R3_HumanResources WebFlowConnector (please see attachment for error)
So, In reply to this I mentioned that to get rid of the warning message you have create users in both the systems. May be you do not grant authorization as per your requirement.
because these warning message are been displayed because the UWL UI havebeen configured to pull tasks from 2 backends. and User logging in mighthave access to only one backend system so, that's the reason for other R3 system they get the warning message.
Or if there is a concern with basis Plug-ins then it will be adviced to refer to the Notes, as those are system requirement. -
How to connect Webi Report into SAP Portal?
Dear Gurus,
i would like to connect Webi Report into SAP Portal.
Could you please give me the steps to follow to acheive that requirement or send me some documents?
ThanksPlease check the wiki below.
http://wiki.sdn.sap.com/wiki/display/BOBJ/IntegrationofBOEXI3.1intotheSAPEnterprisePortal+7.x -
Multi SAP ECC Server Connection to Single SAP Portal
Dear Experts,
We have connected multiple SAP Client of same ECC server to Single SAP Portal and we are able to view data using various standard SAP ESS/MSS Objects.
Is it feasible to connect Multiple SAP ECC Servers to one SAP Portal Server for showing data from varios servers using Standard ESS/MSS Objects.
Any help appreciated.
Rgds
GulshanHi Gulshan,
You are right....these are the JCO names being picked up by standard ESS/MSS applications.
The Standar DCs will be calling these JCO names only while connecting to the SAP Server.
As you described,
The portal do have system alias name as unique name.
You may need to use some customizations.....plz find the below threads...they may be of your help.
[Thread1 - Change the JCO name (RFC_META_DATA) |Change the JCO name (RFC_META_DATA);
[Thread2 - How to change the JCO reference to an existing model|How to change the JCO reference to an existing model;
Good Luck!!!
Biroj Patro. -
REP-56110: Failed to connect to security repository Oracle Portal.
Dear All,
I need your help on the error REP-56110: Failed to connect to security repository Oracle Portal.
I have installed Oracle Application Server 10g R2.
I have enabled SSO for form Sevice and Report Service.
I created OID user login and map it to my database user (on which my Application Run).
When i run my application, SSO page apear. I login it with user id and Password and My application Runing Succesfully. But when i call Reports from my Application through Run_Repor_Object or Web.Show document. I get the error REP-56110: Failed to connect to security repository Oracle Portal.
my oid user id and passwor is as follow
username = ssotest
password = ssotest1
IF i run rwservlet command. It is showing the Server page with Secure mode.
http://server:7778/reports/rwservlet/showjobs?
What is the reasong behind this? Help me out.
http://server/reports/rwservlet?destype=cache&desformat=pdf&report=sr_master.rdf&FromDate='01-JAN-12'&ToDate='31-DEC-12'&SSOConn=test/OracleDB/ssotest
where -- test is my Resoruce Name define in OID
oracleDB Resource Type
ssotest my sso user name
Edited by: Meherban Khan on Mar 27, 2012 6:21 AMI changed %PORTAL_DB_USERNAME%/%PORTAL_DB_PASSWORD%@%PORTAL_DB_TNSNAME%
with the actual username/password of the portal schema. Now i get the following Error.
REP-56071: Security check failed with error message: Error code30004 - Cannot access the output type:cache
In package:wwv_rw_usr function:security_check
Command line is: server=rep_portal_form_report_services report=KPIx/Churn Analysis/ChurnByAgeGroup.jsp destype=cache desformat=html rundate="27-DEC-05 12:12:20"
Executed on:12/27/05 12:12:29 -
Connecting SAP PLM system to iview portal.
Hi experts i want one clarification on process of connecting SAP PLM system to iview portal.
here my scenario is SAP PLM->>>XI--->>>WEBSERVICES
RFC-->>XI--->>>>SOAP
1---->>here i have to get the list of all materials from SAP PLM using iview as
front end tool.
2---->>and the next thing is if the material is camera means it should require the
lengs software for the camera.In the iview we can select the material
for upgrated software.
3--->>after that the input parameters wil be sent to webservices
(some website) using XI part(mapping and all) and the response should come back then it has
to be stored in the SAP PLM system.
please clear me all the above questions.
thanks & regards
babuHI,
See
1) Request is sent from the Portal.
2) Web Dynpro application is called through the URL.
3) Web Dynpro app makes use of Web Service based Model in sending SOAP request to XI.
4) SOAP adapter converts the incoming SOAP message into XI Message.
5) Synchronous call is made from XI to R3 backend using RFC adapter.
6) Response is mapped and routed back as SOAP message.
Necessary design steps in interface objects, mapping objects and Business process are created according to the functional requirements.
Sender Soap Communication channel is setup in Configuration along with other essential configuration steps.
WSDL is generated for the message interface in Integration Directory using Tools-->Define Web service.
Override the default URL with following while generating WSDL.
See the below link
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1334 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Regards
Chilla -
Connecting webdynpro's to MS Sharepoint without SAP Portal
Hello,
A client wants to use ESS in combination with Microsoft Sharepoint Services. But they don't want to use the SAP Portal. Is it possible to use the standard SAP Employee Self Service without using the SAP Portal? So connect the standard webdynpro's to Microsoft Sharepoint Services?
Thanks in advance.Nope, unfortunately, that's not an option. Everyone (SAP, MS) has confirmed to me this is not possible in a standard way, so I'll keep it at that....
Maybe you are looking for
-
Need help with locating a key using a value in a HashMap.
I am quite new to Java and programming, and am just learning this in High School (enjoying it thoroughly). Sorry if I don't respect the etiquette or formatting of this board (it's unintentional). I am using the book, Objects First Wth Java A Practica
-
Incorrect date format in Crystal Report XI
I have a problem with date in reports if Day in date (yyyy/mm/dd) less than 12. Problem is: I create a report (through application). If I check the instance of the report created on Crystal Server (in Central Management Console) it's correct. If I tr
-
Hello, In a page bean, a code is written to produce a bar chart image. The chart image is successfully created in app server's local directory c:\mycharts What URL should be given to view this image from the browser. Since this image is created dynam
-
I have an ipad 2 and when I bring up itunes there is no ipad icon on the left hand side. Suggestions? Yes, my ipad is connected to my computer via a ubs cable?
-
Download photoshop elements 8 binaries
I have PSE8 on PC which came with a wacom tablet. I am changing PC and have my original mail with the license key, is there an adobe location where I can re-download the binaries?