RSREGEN is not available in the System NSP

Hello @ all,
I like to compile all SAP Standard ABAPs. In older releases I could do this with the ABAP RSREGEN, but in the MINISAP (NSP) this ABAP is not included. Does anybody know, if I can do the compiling also in the NSP-System and how???
Thanks for your answers
Nicole

Hi Nicole,
Try it with the transaction code:
SGEN
This will usually do the job.
Regards,
Klaus

Similar Messages

  • Client is not available in the system

    Hi Experts,
    A quick help need. Few users on our client side are logging to portal. They go to Process Bid aplication of CCMS.
    Here they are getting "Client is not available in the system" error. We have verified the portal and backend roles and every thing is fine. can you please suggest the solution.
    Thnx in advance

    Hi Vijay,
    Pls check the system in which you have defined the client is correct.
    Thanks
    Anil

  • The currency translation type 0MEANDAILY is not available in the system

    While executing certain queries for CRM Sales I am getting this error "The currency translation type 0MEANDAILY is not available in the system" I have looked and haven't found this info object in the Business content.
    Any help?
    Thanks
    Arunava

    Dinesh,
       If I do a transfer Global setting from RSA1 on my CRM system  there are four to choose from
      1> Currency
      2> unit of measurement
      3> Fiscal year variant
      4> Factory calander
      Which should be chosen..?? for the 0MEANDAILY . From Anurag's post it's evident that this is a part of the BC and being an info object it's not populated by transferring Global data. Please explain
    Anurag,
      Can you please be a little more specific .. I am in the rsa1--> bc    Then what.. How do I search? I searched against the infoobjects and this is not available
    Thanks
    Aruava

  • Currency translation type 0CMCALDAY is not available in the system

    Hi,
    When I run the query, I am getting following error message
    "Abort the currency translation type 0CMCALDAY is not available in the system"
    I couldn't find 0cmcalday object in BC too. How can I install in this obj in BW??
    Thanks,
    SK

    Problem solved
    It is located under Currency Conversion types, in the BC

  • 0FI_GL_14 - Not available in the system

    Hello
    We need to use the datasource 0FI_GL_14 for GL reporting. But the data source is not present in the system. We are currently on SAP ECC 6.0 with SAP_BW content release on 700 and level 016 and - on R3 side.
    And on BI side SAP NetWeaver 2004s with BI content release on 703 and level 012 and SAP_BW is on 700 release with level 19.
    To have that EhP3 datasource in the system is it mandatory to have the SAP_BW levels same in both BI and R3? Could any one of you let me know the patch levels need to be implemented. Thanks.

    Hello,
    You can see the necessary levels here;
    http://help.sap.com/saphelp_nw70/helpdata/EN/45/4f8e8bbf3f4f63a5dd197ef7d53fa2/frameset.htm
    SAP Enhancement Package 3 for SAP ERP 6.0
    and
    SAP NetWeaver 7.0 BI Content Add-On 3 Support Package 08
    It is not necessary to have the SAP_BW levels the same on each system.
    Best Regards,
    Vincent

  • Getting error while opening a saved for later notification: The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action.

    Hi All,
    While opening a saved for later notification, we are getting "The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action". error.
    This is a custom notification.
    Please help.
    Thanks
    Raghava

    HI All,
    Please help on this issue.
    Thanks
    Raghava

  • Error Message: "Skype can not start because the system is not available"

    Try to reset all Skype settings. Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old. Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder. Restart Skype. N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder. 

    Okay!
    I'm newbie here, but it doesn't matter. I dont want to do here anything else, just write off my opinion about the Microsoft's "new" Skype, and I hope they will read...
    This is a cropped image - of course hungarian, because I'm hungarian, but I think many of us could see this as well. How this is possible? "The Skype can not start because the system is not available" *** What kind of system? The Skype was on a P2P system, where is impossible that the system is not available! This is why the skype was much better than the Microsoft's messenger. Then they bought it, and make it wrong...
    I found a solution for this problem, this can happen if my client is not updated. But IT IS!
    How does it works? Can we use the **bleep** Skype how we would like to use? Or this time we need to find an other application (like Viber), and using that while they not buying that as well, just because that is better?
    Edited to conform with the Community Guidelines
    Subject/title edited to better reflect post content.

  • Encore CS5:  The software that's used to decode the media is not available on this system...

    Hi guys, I am needing assistance with this matter.  I have read up on similar threads (mostly commented on my Bill Hunt), but I fear I may be missing something.  Can anyboy please assist me?
    Here's the background:
    OS:  Windows 7 64-bit.
    Video footage format:  AVCHD 1440 X 1080 (1.333) 25fps, 48KHz
    Photoshop Images:  1440 X 1080 (1.333)
    I have been running CS4 Master collection for the past year and a half, with minimal hassles in encore (except for the early patch that needed to be downloaded and applied for some or other transcoding error in Encore CS4). 
    Right, so we bought the CS5 Master collection upgrade, and all applications are running great, except Encore.  The moment I have completed editing my hour-long video in Premiere Pro CS5, I "send to Encore" via Dynamic Link.  (This is the way I have been operating countless times in CS4.  However now, in Encore CS5, the programme opens with all the regular project settings and saving dialogues, but the the moment it looks as though Encore is going get going, it stalls and doesnt respond, forcing me to close and try again. 
    So I tried the other way around.  I restarted Encore, created a new project, in a new project folder, encore opens, and I chose to Import as "new timeline" selecting the Premiere project of choice.  This time around, i don't get a crash out of Encore, instead I get the following message:
    "The software that's used to decode the media is not available on this system. 
    Installing the correct decoders for the files you are working with may help to correct the problem."
    So I googled the matter, and came up with Bill's response to the same problem (expect the date that it was posted was back in 2009).  I am would desperately like to know if there is a solution, a patch, a workaround of some sorts that can help me get back to my usual workflow. I am pretty screwed without encore at this present moment, and the work is piling up.  Can anybody help?
    Many Thanks,
    Matt

    I am having the same problem however I end up having hardware error "Sense code 52102"
    My video capture is similar to yours except I am using HD (Canon HNV model Legria HV40)
    The process takes a long time and I have breaks in my recording to DVD and with no sound - once it completed after 40 hours.
    I have wasted over 20 DVD's trying different things.
    OS:  Windows 7 64-bit.
    Video footage format:  HD 1440 X 1080 (1.333) 25fps, 48KHz
    Photoshop Images:  1440 X 1080 (1.333)
    I have not tried what you did buy opening up Encore and importing to new timeline , let me do that and see if I get the same message.

  • Adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem

    Hi,
      I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder.  "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
    The files we're shot with HD cameras.  Edited in Premiere Pro CS3.  I installed the update 3.0.1 with still the same error.
    I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash.  I tried this twice....
        Thanks in Advance

    Hi Hunt,
           Here is the skinny.  A window base PC.  footage shot with HD sony HD cameras,  Project imported to Premiere CS3.  Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality.  Imported them to Adobe Encore CS3.  After about ten files or so.  I got the error message.  Did all the basic trouble shoot like restarting the computer, got latest patch.  Even build a new test project with the same problem.
        Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded.  So it will be a double compression and I dont want that.  So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
       what do you think ????
       Peter

  • Just purchased and downloaded pe 13. While installing, I found out pe13 is not compatible with my OSX 7.5 system. Any Idea's on how to swap for pe 12? It's not available on the Adobe web site. Any suggestions would be appreciated. Thanks

    Just purchased and downloaded pe 13. While installing, I found out pe13 is not compatible with my OSX 7.5 system. Any Idea's on how to swap for pe 12? It's not available on the Adobe web site. Any suggestions would be appreciated. Thanks

    daleroach
    Adobe is not going to swap 13 for 12. It is selling only 13 download as you found out. So, you are going to have to purchase 12 if you want to use that program. It may still be available at some retail locations, such as Amazon.
    If you are within 30 days of purchase and have purchase the download from Adobe, then contact Adobe via its Adobe Chat to get a refund. To do that, click on the following link
    http://helpx.adobe.com/sea/contact.html?step=PRE_membership-account-payment_payments-invoi ces-orders_stillNeedHelp
    Premiere Elements
    Membership, Account, Payment
    Payments, Invoices, Orders
    Chat Panel
    If the link does not hold its set, then you will need to navigate to Chat Panel using the above titles as guides.
    Please let us know if you are OK with the above. If any questions or need clarification, please do not hesitate to ask. Reminder..we are not Adobe. This is a user to user
    forum with an undefined frequency of an Adobe presence in it.
    Best wishes
    ATR

  • Software used to decode the media not available on this system

    "The software that's used to decode the media is not available on this system…"  I get this error message when I try to import an H.264 video file (about 3.7 GB in size) into Encore CS6 to make a Blu-Ray.  I've read the message threads about this problem but they don't seem to apply to my case.  I'm using a recent Mac Pro Tower running OS 10.8.5.  I made the H.264 file using Compressor 4 and a Matrox MX02 box using the Matrox encode setting for high-quality Blu-Ray.  I've used this workflow a number of times before and never had any trouble importing the resulting files into Encore.  I've tried starting a new Encore project and also re-doing the encoding of the H.264 file, without success.  I've also experimented with importing other, recently made H.264 files into a new Encore project and these, as before, present no problems.  I'm baffled!

    I solved the problem and thought it might be helpful if I described the solution.  The error message gave no indication of the nature of the problem, which was caused by a single clip in the Avid Media Composer timeline.  This clip was an import from Photoshop, resized in Avid Media Composer.  In height, the pixel dimensions of the Photoshop file were a bit more than 1080.  I have no idea how this dimension survived rendering in Media Composer or H.264 encoding in Compressor using the Matrox MX02 box.  But it evidently did.  When I resized the image in Photoshop before importing it into Media Composer, then re-encoded the video as H.264, it imported normally as an asset into Encore.

  • The software that used to decode the media is not available on this system

    I can see that this has been asked numerous times over the years.  I am sorry to post this AGAIN, but I have not yet found a solution and have a deadline looming.
    We created a 200+ DVD's using Encore CS6 on a Windows 7 system.
    We upgraded to Windows 8.  Re-installed CS6 Production Premium.
    Now, when we try to open the projects to make a few edits, we get the "The software that's used to decode the media is not available on this system.  Installing the correct decoders for the files you are working with may help to correct the problem."
    I've done the Encore Updates.  I've done the Media Encoder updates.  I've "Run as Administrator".
    I've tried re installing.
    Does anyone have any suggestions on how to debug this?  The videos are already transcoded as *.m2v files.
    You'd think this would be easy... like install a codec or something.
    ==> Mike.

    Part of the problem is that this is probably not a "logical" error.  The common cause of this issue is still image files where the pixel size is too large. This suggests that Encore's (and other Adobe apps) ability to handle image size is exceeded without a better error message. The link, which I'm going to post until I find a "new" location (if one exists) is now a bad link:
    http://helpx.adobe.com/encore/kb/error-software-used-decode-media.html
    And in this example where it was not an image issue, the user fixed the problem by re-encoding the problem file.
    http://forums.adobe.com/message/6004428#6004428

  • Error: Qeue 2LIS_03_BF is not available in the source system

    Dear Experts,
                     While scheduling 2LIS_03_BF. It displyed following error.
    Error : Queue 2LIS_03_BF is not available in the source system
    What could be the problem,
    Please help me to resolve this issue.
    Regards,
    Khader,

    Hi Mansi & Sujatha,
    I am also facing the same problem, in RSA7 status of  2LIS_03_BF is in red.
    Please suggest how could I proceed further.
    Regards,
    Venkat.

  • How to find out number of background work processe available in the system?

    Hi All,
    I have a FM that triggers a background job using JOB_OPEN, ABAP_SUBMIT and JOB_CLOSE. But the problem is if there are no background work processes available at that moment, it does not return error. Not sure whether the job is even scheduled!
    Is there a way to find out if there are any background work processes available in the system? I know a FM SPBT_INITIALIZE which gives info about dialog work processes. Is there any other FM similar to this which gives info about background wp??
    Regards,
    Shailesh

    your Job will remain in a queue by message handler. once workprocess is free, your job gets scheduled
    by the way, you can use the functionality used in FM TH_DISPLAY_WORKPROCESS_LIST to read the workprocesses
    the command which gets you the workprocess is:
    CALL 'ThWpInfo' ID 'OPCODE' FIELD OPCODE_WP_LIST
                      ID 'TAB' FIELD LIST_STATE_WPLST-TABL
                      ID 'CPU' FIELD LIST_STATE_WPLST-CPU.
    check how its written in include LSDEBF01, form SET_LIST_WPLST
    Edited by: Soumyaprakash Mishra on Dec 12, 2011 12:17 PM

  • I updated to Yosemite.  iPhoto says I need to update to the latest version.  The app store says the version I need is not available in the US.  Thus iPhoto won't work or even open at this point

    I updated to the yosemite system.  My iPhoto says I need to update to the latest version for it to work with yosemite.  The app store searches and then states the version I need is not available in the US.  Currently I cannot use iPhoto.  Suggestions?

    Csound1,
    Thanks for the hint about not emptying the trash.  I will try to work on this tonight or tomorrow morning and let you know if "this helped me".
    Russell,
    If you go into the iLife support forum for iPhoto, there are a couple good threads.  Basically, iPhoto can't be downloaded by anyone anywhere in the world unless the app store has it listed in your "purchases" list.  The threads contain a lot of steps and it looks like this could be difficult for novices like me.
    Rysz,
    I will also look at the link you provided before I get started.  Thanks.

Maybe you are looking for

  • IPad mini is slow when opening an image in photos

    I Have an iPad mini (wifi) and its slow when opening an image on photos. It takes 20 seconds to open a single image. I tried exporting my pictures to a usb and only stayed with 1,008 pictures. I Don't know what to do it worked fine when I first got i

  • How to toggle a region in AJAX

    I have 5 regions in a page and each region may contain upto 10 items. Currently these regions are show/hide type based on "self submit select list" value at the top of the page.Now, I need to convert this self submit LOV to Ajax style LOV. If I conve

  • My illustrator CS3 saved file icon shows as a blank white square?

    This is really odd. I store all my AI files in one folder. When I first open the folder, the lovely orange AI icons representing each file all change to white squares (actually they're in portrait or landscape view depending on how the file was saved

  • Can anyone send me the CRM OD ER diagram.

    Hi Can anyone send me the crm od ER diagram to [email protected]? thanks a lot

  • How do I save my files?

    if I have files in my system or if I download files how do I save to my Adobe acrobat cloud