RSRV - BIA Consistency-Check (fast).

Hi Experts,
At RSRV whilst doing the "Consistency-Checks (fast)" under BI accelerator node on a cube (this cube is on BIA) I'm ending up with message "Index of table /BI0/XCRM_IBEXID must be regenerated".
Any idea on what does that mean? And how to address this?
Regards.

Hi Kumar ,
Due to some reasons your index for that cube is lost.Due to this their is inconsistency .
Your index and BIA correspond to each other .
Suggested solution :
1.Go to cube ->manage ->performance ->DBindex create. or
2.You can go to tcode SE38 and run a report RSANAORA ..Here you can give your cube name and can repair the index .
3.For multiple index correction you can SAP_INFOCUBE_INDEXES_REPAIR report program .
In Tcode DB20 you can get statistics of all indexes in diagnostics ->missing table and indexes.
4.Possible reason of index inconsistency is some new loads (hierarchy etc ) or deletion of some old requests that you have already indexed.
Hope this will be helpful .
Regards,
Jaya Tiwari

Similar Messages

  • BIA consistency checks transaction

    I have a question regarding the following link:
    http://help.sap.com/saphelp_nw70/helpdata/en/45/f9d95d34c606f7e10000000a155369/content.htm
    From the BIA monitor screen, I only seem to have goto -> analysis of BI Objects (RSRV), and dont have the choice of goto -> Consistency checks which seems to suggest it takes you to a specialist BIA area
    Is this an obsolete link, or I need to install something?
    Kind regards
    Nic

    Thanks for your prompt replies
    Yes, I could use RSRV, but I have to enter a combined check test for each cube - this screen seems to suggest you can set for all relevant cubes/add multiple cubes, also set the check to be executed immediately after the rollup of new requests, and view all check lists on the screen.   The answer I need to know is does anyone else have access to this specialised BIA screen, or does it not exist?
    Kind regards
    Nic

  • The time characteristic consistency check has produced an error     DBMAN     62

    Hi
    We are getting an error while updating to one target as The time characteristic consistency check has produced an error""
    * Checked the respective PSA data field  which is fine. Dates are in correct format.
    * RSRV ran for the particular target. It had error but the jobs were successful till yesterday.
    * Data from 01.05.2014 is having the problem ( Which I got from the record number in PSA )
    NB: We are running on HANA database but the respective target is not yet HANA Optimised
    Details Figures Attached
    Any Idea.. What could  have gone wrong
    Regards
    Reshoi R

    Hi
    Record Number 2995 is shown in the figures attached.
    I have already carried out the deletion and automatic repair mentioned in RSCV061 even before posting this question but of no use ( I have shown that also in the figures attached at the posting time.
    Reporting is fine. The problem is while loading the data to the cube. The loading is fine till date 30.04.2014 but from the date 01.05.2014. The record is error while updating.
    The cube is partitioned from month 01.2008 to 12.2015.
    Regards
    Reshoi R

  • Time Dimension Consistency Check Failed

    Dear all,
    Got a issue..
    A cube which is found to be active in RSA1, but when we do the consistency check for time dimension in the transaction RSRV, we get the following error.
    Unknown, profound errors with instance creation in test "CL_RSRV_CHK_TIM_DIM"
    Pl help to resolve this issue.
    Thanks,
    Ramya

    Hi Ramya,
    Welcome to SDN...!!
    Check with the Correct Error option in RSRV after selecting testing ur cube.
    Best Regards,
    SG

  • LIve Cache Consistency Check Program

    Hi All,
    Is it possible to stop Live cache consistency check program /SAPAPO/TS_LCM_CONS_CHECK  when it is running.
    Thanks.
    Bala
    Message was edited by: Bala Subramainam

    Hi Uma,
    Actually the job finished quite fast and was unable to check this. Would probably check this in DEV and reply back to you. Thanks for your reply.
    Have assigned points for you.
    Regards
    Bala

  • Error during currency conversion and consistency check in a sales order

    Hi Experts,
    I am facing the below error in the sales order. The sales order is having so many items. The below error is coming for few items only. I have checked the currency exchange rates also. All are maintained properly.
    Please advice me how to fix this error or which class,methods are responsible for checking the above details while saving the order.
    Thanks,
    Sri

    Hi Christophe,
    FYI
    Error during currency conversion frm &1 to &2 (date &3, ref. curr. &4)
    Message Class - CRM_CUMULATED_I
    Message No     - 013
    Error during currency conversion for &1 and &2
    Message Class - CRM_CUMULATED_I
    Message No     - 008
    Consistency check: Logical key does not match
    Message Class - CRM_CUMULATED_I
    Message No     - 011
    Thanks,
    Sri

  • Windows Server 2012 - Backup failing with Exchange - The application will not be available for recovery from this backup. the consistency check failed

    Hi
    We have a Windows 2012 server with Exchange 2013, all is working fine except now i am getting issues with the backup.
    'Exchange - The application will not be available for recovery from this backup. the consistency check failed for the component Microsoft Exchange Server'
    I have checked the database all is fine, i have created a new db and move all mailbox;s over and then removed the old db, i have enabled circular logging and then disabled it, it seems no matter what i do i cannot get a full backup!
    i did have to restore the server once and the backups still worked for about 4 days after that and then stopped, i have also tried to remove and re add the backup role!
    i am stumped, any advice would be great!

    Hi
    Ok, i created a test db and tried to back it up right away, it failed, i did not add any mailbox's to it either. i got quite a few events in the windows logs, as well as the same event above i got the following:
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:          21/01/2013 10:16:30
    Event ID:      2038
    Task Category: Exchange VSS Writer
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      NERDS-DC01.nerds.local
    Description:
    Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database 4843b37c-7b3c-42b2-8b57-1393615c2c15.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchangeRepl" />
        <EventID Qualifiers="32772">2038</EventID>
        <Level>3</Level>
        <Task>2</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
        <EventRecordID>261645</EventRecordID>
        <Channel>Application</Channel>
        <Computer>NERDS-DC01.nerds.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
        <Data>4843b37c-7b3c-42b2-8b57-1393615c2c15</Data>
      </EventData>
    </Event>
    AND
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:          21/01/2013 10:16:30
    Event ID:      2038
    Task Category: Exchange VSS Writer
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      NERDS-DC01.nerds.local
    Description:
    Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database db5826f3-1029-4219-ad80-441a0e94537a.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchangeRepl" />
        <EventID Qualifiers="32772">2038</EventID>
        <Level>3</Level>
        <Task>2</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
        <EventRecordID>261646</EventRecordID>
        <Channel>Application</Channel>
        <Computer>NERDS-DC01.nerds.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
        <Data>db5826f3-1029-4219-ad80-441a0e94537a</Data>
      </EventData>
    </Event>
    and
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:          21/01/2013 10:16:30
    Event ID:      2034
    Task Category: Exchange VSS Writer
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      NERDS-DC01.nerds.local
    Description:
    The Microsoft Exchange Replication service VSS Writer (Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9) failed with error FFFFFFFC when processing the backup completion event.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchangeRepl" />
        <EventID Qualifiers="49156">2034</EventID>
        <Level>2</Level>
        <Task>2</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
        <EventRecordID>261649</EventRecordID>
        <Channel>Application</Channel>
        <Computer>NERDS-DC01.nerds.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
        <Data>FFFFFFFC</Data>
      </EventData>
    </Event>
    and
    Log Name:      Application
    Source:        SPP
    Date:          21/01/2013 10:16:30
    Event ID:      16389
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      NERDS-DC01.nerds.local
    Description:
    Writer Microsoft Exchange Writer experienced retryable error during shadow copy creation. Retrying...  More info: .
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="SPP" />
        <EventID Qualifiers="0">16389</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
        <EventRecordID>261650</EventRecordID>
        <Channel>Application</Channel>
        <Computer>NERDS-DC01.nerds.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Microsoft Exchange Writer</Data>
        <Data>
        </Data>
        <Data>The writer experienced a transient error.  If the backup process is retried, the error may not reoccur. (0x800423F3)</Data>
        <Data>
        </Data>
        <Binary>00000000A5120000981200000000000042BEB7C511CAC619E59C92030000000000000000</Binary>
      </EventData>
    </Event>

  • Consistency check error in sender file content conversion

    Dear Experts,
    I am trying one simple File to File scenario in which i have only fields 1>salesorder_number 2>Description
    I created a txt file with line items "100,crudeoil" with file name as salesorder.txt
    In the sender file adapter i have configured the file convertion paramenters as follows:
    Document name : mt_salesorder_sender  
    Document namespace : http://se.com.sa/sec-sa-qax          "Namespace of message type
    Recordset Structure : document,*
    document.endSeparator : 'nl'
    document.fieldSeparator: ,
    document.fieldNames : salesorder_number,Description
    So after this if i run the scenario In file adapter i am getting the error like "Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'document.fieldFixedLengths' or 'document.fieldSeparator' is missing Consistency check: no. of arguments in 'document.fieldFixedLength' does not match 'document.fieldNames' (0 <> 2) "
    Please let me know where i am going wrong.
    Regards,
    Santhosh

    Hi,
    please maintain the order as
    Recordset Structure : document,*
    document.fieldNames : salesorder_number,Description
    document.fieldSeparator: ,
    document.endSeparator : 'nl'
    Rgds
    joel

  • Getting error in DB02 after checking Consistency check Unknown objects in A

    Dear All,
    I have getting error in DB02 after checking Consistency check.
    Please find the details.
    I have queries.
    How to correct the Unknown objects in ABAP Dictionary and Optional index is also we have to create please suggest step by step process.    
    Missing in R/3 DDIC      1              11
    Consistency check of 07.04.2009 10:14:24                   
    -- Objects missing in the database          
    Primary indexes                  0
    Secondary indexes                0
    Tables                           0
    Views                            0
    -- Unknown objects in ABAP Dictionary       
      |   |-- DB tables                        1
          |-- DB indexes                      11
         |-- DB views                        12
    -- DB tables without unique index   1
    -- Optional indexes                         
    Too many indexes created         0
    -- Indexes not created            145
    Regards,

    Hi
    Check this may help you
    http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/e4ff3e65b66976e10000000a1553f6/content.htm
    Regards
    Uday

  • Consistency check error in OBIEE 10g

    Hi
    I have the below error while doing consistency check.
    I was trying to join two fact tables by complex join, but getting below error
    NQSError:15009 Could not load navigate space for subject area
    NQSError: 15009 Multiple paths exist to table Plans.Circular joins schemas not supported
    Please suggest

    If you have to join fact tables in physical, make sure your logical layer remains a star.
    Either add both fact tables to one logical fact table source , or create two logical stars, where both facts are joined to all conformed dimensions.
    Note: if both facts are not at exactly same granularity, your reports will show incorrect results most definitely. So avoid fact to fact joins.

  • Reg: consistency check in recordset structure validation

    Hi all,
    I am doing FCC to FCC scenario, i am getting this error. Help me out, it is very urgent for me.
    Sender Adapter v2723 for Party '', Service 'bs_text2text':
    Configured at 2007-08-21 08:00:49 UTC
    History:
    - 2007-08-21 09:29:06 UTC: Retry interval started. Length: 2.000 s
    - 2007-08-21 09:29:06 UTC: Error: Conversion of complete file content to XML format failed around position 0: Exception: ERROR consistency check in recordset structure validation (line no. 87: missing structure(s) in last recordset
    - 2007-08-21 09:29:06 UTC: Processing started
    - 2007-08-21 09:29:04 UTC: Error: Conversion of complete file content to XML format failed around position 0: Exception: ERROR consistency check in recordset structure validation (line no. 87: missing structure(s) in last recordset
    - 2007-08-21 09:29:04 UTC: Processing started
    Regards,
    Ajay.

    Hi Ajay,
    Problem with the file content conversion parameters you specified in the sender file adapter. 
    Do let us know your DT structure and FCC parameters specified in adapter.
    Regards,
    Sumit

  • ERROR consistency check in  recordset structure validation

    Hi,
    I have a file that has the format below. The file is managed with the below content conversion parameters. However, it's not working and the error message that i get is "Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR consistency check in recordset structure validation (line no. 7: missing structure(s) in last recordset". Any idea, what when wrong? Thanks.
    Message Type defined:
    FileHeader            (occurrence = 1)
      ARPostingRecord    (occurrence = 1 to unbounded)
        RecordHeader       (occurrence = 1 to unbounded)
        RecordDetail          (occurrence = 1 to unbounded)
    Source file looks like this:
    01 Field1 Field2...Field-n  
    H  Field1 Field2...Field-n  
    L  Field1 Field2...Field-n  
    L  Field1 Field2...Field-n  
    H  Field1 Field2...Field-n  
    L  Field1 Field2...Field-n  
    L  Field1 Field2...Field-n  
    where:
    01 is the keyfieldvalue for FileHeader
    H is the keyfieldvalue for RecordHeader
    L is the keyfieldvalue for RecordDetail
    Specified parameters:
    FileHeader.fieldSeparator
    FileHeader.endSeparator
    FileHeader.fieldNames
    FileHeader.keyFieldValue
    RecordHeader.fieldSeparator
    RecordHeader.endSeparator
    RecordHeader.fieldNames
    RecordHeader.keyFieldValue
    RecordHeader.missingLastFields
    RecordHeader.keepIncompleteFields
    RecordDetail.fieldSeparator
    RecordDetail.endSeparator
    RecordDetail.fieldNames
    RecordDetail.keyFieldValue
    RecordDetail.missingLastFields
    RecordDetail.keepIncompleteFields
    ignoreRecordsetName
    Recordset Name:
    ARPostingRecord
    Recordset Structure:
    FileHeader,1,RecordHeader,1000000,RecordDetail,1000000

    >ERROR consistency check in recordset structure validation (line no. 7: missing structure(s) in last recordset". Any idea, what when wrong?
    When you are not sure about number of records for RecordHeader and RecordDetail, Please specify wildchar character. Dont give max numbers.  The errors says expecting the specified number for recordset and  since it is missing gives errror.

  • ERROR consistency check in recordset structure

    Hello All,
    Below is my input file format looks like:
    HEADER
    REC_1
    REC_1
    REC_1
    REC_2
    FOOTER
    And I have defined the Recordset structure as HEADER,1,REC_1,*,REC_2,*,FOOTER,1.But the occurence of REC_2 is optional (0 to Unbounded).
    Conversion of file content to XML failed at
    position 0: java.lang.Exception: ERROR consistency check in recordset structure
    validation (line no. 4: missing structure(s) before type 'HEADER'
    It looks like the error is due to missing REC_2 segment in the input file.
    Can you please tell me how to handle this in FCC
    Thanks,

    Hi Naresh
    IMHO, I don't think that the error is due to missing REC_2 in the input file.
    From SAP library, * includes also 0 occurence.
    Converting Text Format in the Sender File/FTP Adapter to XML - Configuring the File/FTP Adapter in Integration Directory…
    Under Recordset Structure, enter the sequence and the number of substructures as follows:<NameA,nA,NameB,nB,...>, where nA=1,2,3,... or * (for a variable, unlimited number, including 0).
    Please provide screenshot of your FCC configuration and also sample input file that is causing the error so that it can be analysed further.
    Rgds
    Eng Swee

  • Errors occur during executing consistency checks

    Hi all,
    During my phase"executing consistency checks", errors occur :
    X_STXH| Sender structure S_STXB is not assigned to the receiver structure R_STXB.
    It happened in PC001_PCL_CHECK sub-activity.
    The details as follows:
    ubactivity PC001_PCL_CHECK was started on 08.03.2009 at 22:10:02 by user LEEE03   |    |
    Check COBJ started at 08.03.2009 22:10:30 by LEEE03
    Check COBJ finished at 08.03.2009 22:11:04 by LEEE03
    Check HIER started at 08.03.2009 22:11:04 by LEEE03
    Check HIER finished at 08.03.2009 22:11:04 by LEEE03
    Check RELS started at 08.03.2009 22:11:04 by LEEE03
    X_STXH
    Sender structure S_STXB is not assigned to the receiver structure R_STXB
    X_STXH
    Sender structure S_STXB is not assigned to the receiver structure R_STXB
    X_STXH
    Sender structure S_STXB is not assigned to the receiver structure R_STXB
    X_STXH
    Sender structure S_STXL is not assigned to the receiver structure R_STXL
    X_STXH
    Sender structure S_STXL is not assigned to the receiver structure R_STXL
    X_STXH
    Sender structure S_STXL is not assigned to the receiver structure R_STXL
    Check RELS finished at 08.03.2009 22:11:20 by LEEE03
    Check RULE started at 08.03.2009 22:11:20 by LEEE03
    Check RULE finished at 08.03.2009 22:11:29 by LEEE03
    Check DICT started at 08.03.2009 22:11:29 by LEEE03
    X_STXH
    Field TDNAME does not exist in the sender structure on sender system
    X_STXH
    Field TDOBJECT does not exist in the sender structure on sender system
    X_STXH
    Field TDID does not exist in the sender structure on sender system
    X_STXH
    Field TDNAME does not exist in the sender structure on sender system
    X_STXH
    Field TDOBJECT does not exist in the sender structure on sender system
    X_STXH
    Field TDID does not exist in the sender structure on sender system
    Check DICT finished at 08.03.2009 22:11:29 by LEEE03
    Check FIMA started at 08.03.2009 22:11:29 by LEEE03
    Check FIMA finished at 08.03.2009 22:11:31 by LEEE03
    Check RUMA started at 08.03.2009 22:11:31 by LEEE03
    Check RUMA finished at 08.03.2009 22:11:31 by LEEE03
    Check SELS started at 08.03.2009 22:11:31 by LEEE03
    Check SELS finished at 08.03.2009 22:11:33 by LEEE03
    Subactivity PC001_PCL_CHECK was completed on 08.03.2009 at 23:11:40 with status ERR
    I have searched in sap marketplace and also google, no results come out.
    Could anybody help me out?
    Thanks.
    Best Regards,
    Eric Lee

    I've implemented the note 1101544 in the central system
    executed the report Z_CNVTDMS_08_FIELD_SET with P_PHASE to 'S'.
    and after this, I re-executed the activity "Execute Consistency Checks" from the extended mode of the process tree several times.
    But it remains the same issue.
    Did I miss anything?

  • SQL SERVER 2014 - Project consistency check failed. The following inconsistencies were detected: package.dtsx. has a different ProtectionLevel than the project.

    I am getting the following error when I right click on a package in solution explorer and execute using SQL Server 2014:
    Project consistency check failed. The following inconsistencies were detected: package.dtsx. has a different ProtectionLevel than the project.
    Luckily my solution only has 10 packages.  I have verified and re-verified that everyone is set to dontsavesensitive.
    I have verified and re-verified that the solution has the protection level to dontsavesensitive.
    What on earth is going on here?  I am using windows authentication and have no need for the package to save any sensitive information, nor should there be any.
    Can someone please help me out here?
    The Degenerate Dimension

    Hi MMiligan,
    Just as the error message said, the exactly issue is that the package package.dtsx has a different ProtectionLevel property value than the project.
    So please double check the value of project ProtectionLevel property, like DontSaveSensitive, then make sure all packages in the project use the same ProtectionLevel value.
    If there is still an error message indicated that some packages use a different value, please right-click the indicated package to select View Code, then make sure there is a line like below(the DontSaveSensitive
    protection level corresponds to the value of 0):
    DTS:ProtectionLevel="0"
    The following similar thread is for your reference:
    http://stackoverflow.com/questions/18705161/protection-level-changed-mid-project-now-project-wont-build
    Thanks,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support

Maybe you are looking for