RSS Feed works locally but not live???

I have an rss feed using a class I found online to access an
rss feed. It works fine locally. When I take it online it doesn't
work. I have the crossdomain.xml file on the root of the server.
Any ideas?

a crossdomain policy file needs to be on the server that's
being accessed, so unless it's your rss feed, it won't do any good
there.
Try publishing for 'network access'.

Similar Messages

  • RSS Widget works locally but not on website

    I used the RSS widget to insert the following RSS feed:
    feed://www.bpkids.org/updates.xml
    I have also tried inserting with http:// instead of feed:// but no difference
    When I publish the site and check it on my local folder, it works. But when I post it to my website, it shows nothing.
    This is the first time I've used the RSS widget. It seems straight forward enought, however, I've read in these discussions that there was a bug with the RSS widget recently that was causing it not to work and wasn't sure if this is still a problem. Thanks

    That is a crossdomain issue because you have the site
    accessible via www or without.
    If you use
    http://www.sneeple.com/media_test/index.html
    to access that page it will work.
    Here's what to do to fix it:
    http://forums.flashgods.org/viewtopic.php?f=39&t=94

  • Spry Image Slideshow works locally but not live!?!?

    I am new to the whole website creation. I used the Spry Image Slideshow widget from the widget browser and everything works perfectly when I tested it locally. However, once i uploaded to the server and tested the links I get errors stating that it cannot locate the .js files. Like stated, I am very much new to this and have no idea how to fix this problem. Has anyone else ran into this or know of a solution?
    My website address is www.terranceperdue-architecture.com and the links in question are on the portfolio link.
    So more specifically:
    http://www.terranceperdue-architecture.com/Design%20Studio%201.html
    Any help would be greatly appreciated as I am hoping to use this website to gain an internship for the summer. But if it is not working then that is not an option.
    Thanks for any and all insight.
    -Terrance

    I see where you have posted that you got your slideshow to work, but I do not see any of the reponses on how you did it. I am having the same problem when I test my slideshow locally on dreamweaver it works, but it does not work when I upload it to the internet. It doesn't give me any error, but all it does is show me a black box with a spinning play button like it is trying to load. It doesn't do anything else. I have tried looking at IE, Safari, and Firefox and I get the same thing on all of them.
    Thanks,
    Christin

  • Google maps works locally but not live. not addon problem

    Google maps in an iframe seems to get stuck loading.
    Regular google maps ok.
    by locally I mean:
    if I load the file with the iframe from the version on my computer, it's ok, but when I put it on my server, it fails to load.
    Happens only in firefox. opera/ie/chrome just fine
    Tried the usual fixes (safe mode, skype addon, about;config images.default, clear cache, )
    For me, the page shows a blank.
    here are sample links...http://contrakyoto.byethost9.com/DirectionsAndWhatToBring.html
    http://www.daniweb.com/web-development/web-design/html-and-css/threads/268779
    But in my IDE, I can use the mozilla engine, and I can see the map partially loaded with the "Loading/still having problems" message. I can sometimes see this in FF too. Also, safe mode iwth all addons off also doesnt work.
    What is odd, is that if I load the same page LOCALLY...the map works fine.

    pasting all that HMTL is not necessary, it is not relevant
    here. Make sure you have the FLV, and the FLV's Skin SWF uploaded
    and they are targeted correctly.

  • cffeed caching works locally but not on server

    So I got my new Hostek account set up (woohoo!) and I've started uploading some basic files so I can do thinks like validate my code and make sure everything's working.  One thing that does not work (but does locally) is my news feed caching.
    Pulling in two RSS feeds was seriously slowing down my index page loading, so I stole a trick from Ray Camden on caching the feeds.  It works perfectly on my dev machine at home, but doesn't work on my hosted account.
    Here's the exact code being used:
    <cfset feedurl = "http://velonews.competitor.com/feed">
    <cfset cacheTime = #createtimespan(1,0,0,0)#>
    <cfif not structKeyExists(application,"rsscache") or dateDiff("n", application.rsscache.created, now()) gt cacheTime>
        <cffeed source="#feedurl#" query="entries">
        <cfset application.rsscache = structNew()>
        <cfset application.rsscache.data = entries>
        <cfset application.rsscache.created = now()>
    </cfif>
    <ul>
    <cfloop query="#application.rsscache.data#" startrow="1" endrow="6">
    <cfoutput><li><a href="#rsslink#">#title#</a></li></cfoutput>
    </cfloop>
    </ul>
    I tried wrapping a try/catch around the top section (above the <ul>) and still got nothing for an error message.  The page just stops being rendered at that first <ul>.
    I'm not sure why it works locally but not on the web server.  Any ideas?

    Miraculously, I got it working.
    I changed this:
    <cfloop query="#application.rsscache.data#" startrow="1" endrow="6">
    <cfoutput><li><a href="#rsslink#">#title#</a></li></cfoutput>
    </cfloop>
    To this:
    <cfoutput maxrows="6" query="application.rsscache.data">
    <li><a href="#rsslink#">#title#</a></li>
    </cfoutput>
    And bingo!  It worked. Perhaps it's an idiosyncrasy between CF9 and CF10.

  • [AS3] EventDispatcher works locally but not remotely

    Hi,
    I am very new to Action Script and have the following
    problem. I hope someone can point me in the right direction.
    I have a small video player app. I have added the FLVPlayback
    component to the stage and set some properties via action script
    (AS 3)
    I then instantiate a class to go and retrieve some XML,
    register an eventListener to wait for the XML to be loaded and once
    the event has fired, load the FLV file (just hard coded at the
    moment) into the FLVPlayback object.
    This works when testing in the Flash IDE but not when I
    publish the movie to my webserver. I have tried commenting out the
    player.load() and just adding a textfield and again this works
    locally but not when I publish to the webserver. I have included
    some code snippets below.
    Can anyone tell me where I am going wrong?
    Any pointers much appreciated.
    Thanks
    Martin

    Hi,
    I found the problem if anyone has the same issue. I was
    passing some FlashVars in incorrectly using the
    AC_RunActiveContent.js that comes with Flash. I have switched to
    swfobject and all is well.
    thanks

  • Flash site works locally but not online (uploaded to server)

    We have bought a flash portfolio template and have customized it with our pictures, video, etc.
    When we test it locally on our computer (using different web browsers) it all works perfectly well. We have uploaded the finished website to our server and when you go to the address online, it doesn't work (a loader progress shows but it is stopped and nothing happens).
    We have however uploaded the original template we bought and it works perfectly online.
    The template consists of and index.html, various .swf, and various .xml that we have modified according to the template instructions (it also contains a java script folder we haven't touched).
    What is it wrong with our modified template - it works locally without problem…!
    Thanks for your help

    When a Flash file works locally but not on-line, it's almost always a pathing issue (provided you did upload ALL files and do not have something missing... as suggested by Ned).
    A "pathing issue" results when the main .swf cannot find one or more of the associated Flash files...like an xml file or images.
    It can be something as simple as using switching file names to all lower case. Local machine is not case sensative... most servers are. So "My Photo.JPG" is not the same as "my_photo.jpg". When naming files, best to use all lower case, no spaces in any file or folder names... use_underscore_instead.
    But the most common cause is that those associated files (xml, images, etc.) are not pathed relative to the Web page where the main .swf is embedded. Pathing to the .xml and image files should be as though the .swf was located in the same folder as the Web page... NOT the actual location of the .swf file.
    And that includes paths to the xml file and paths to image files coded into those xml files. Everything need to be coded relative to the Web page.
    This topic has been covered a number of times here:
    http://forums.adobe.com/message/4368273#4368273
    http://forums.adobe.com/message/4294529#4294529
    http://forums.adobe.com/message/4280086#4280086
    http://forums.adobe.com/message/4267408#4267408
    Best wishes,
    Adninjastrator

  • Swf works locally, but not on server

    I have an issue with an xml-driven swf file. It plays fine when I test the site locally, but not when it's uploaded to a server. Here is a link to the page. There are many posts on this and other forums describing the same problem, though I can't find the right solution. The only thing it has convinced me of, is that it is probably a pathing problem. I purchased the file online, and instead of one swf and one xml there are about ten of each to make it work. In addition to this there are about 40 .as files. (all this to make it "easier" to customize).  Since I plan to use this banner rotator on multiple pages, it will be very unconvenient to upload all these files for every page I make. I checked with support for this product, and was told I could make a flash directory, only duplicating the xml-files for each new page and linking the xml back to the swf-files. Otherwise the support answer was very short and unhelpful. I have renamed every path in the xmls so that it should be right. As I said, the file works locally, so I'm not sure what I am doing wrong.
    I have posted in adobe forums before, and I have alwas found helpful and kind responses.
    Thank you,
    Siri

    They're all uploaded to the server, it is also possible for me to dowload them from there. When i run the main swf file through flash player debugger, I get this message:
    Error #2044: Unhandled ioError:. text=Error #2032: Stream Error. URL: file:///Users/Siri/Documents/gullstolen/hjemmeside/flash/produkter/deploy/xml/abrMain.xml
              at com.sQrt121.utils::CustomLoader/configureLoader()
              at com.sQrt121.utils::CustomLoader()
              at com.sQrt121.utils::LoadJob/initJob()
              at com.sQrt121.utils::LoadJob()
              at com.sQrt121.utils::ContentLoader$/addJob()
              at AbrMain/init()
    So I guess it can't locate the xml folder (since it is not there), but I don't know how to change the path. I can change it in the xml, pointing to the swf, but how do I do it the other way?
    This is the main xml-file:
    <?xml version='1.0' encoding='UTF-8'?>
    <abrMain
              width                              = "300"
              height                              = "250"
              pauseOnOver                    = "off"
    >
              <item          swf                    = "/Users/Siri/Documents/gullstolen/hjemmeside/flash/produkter/deploy/abrcontent.swf"                                    xml = "xml/abrContent.xml"                                        config          = "xml/config.xml"/>
              <item          swf                    = "/Users/Siri/Documents/gullstolen/hjemmeside/flash/produkter/deploy/abrbuttonscolor.swf"                               xml = "xml/abrButtonsColor.xml"                                        config          = "xml/config.xml"/>
              <item          swf                    = "/Users/Siri/Documents/gullstolen/hjemmeside/flash/produkter/deploy/abrpreloadercircle.sw f"               xml = "xml/abrPreloaderCircle.xml"                              config          = "xml/config.xml"/>
              <item          swf                    = "/Users/Siri/Documents/gullstolen/hjemmeside/flash/produkter/deploy/abrpreloaderline.swf"                               xml = "xml/abrPreloaderLine.xml"                              config          = "xml/config.xml"/>
              <item          swf                    = "/Users/Siri/Documents/gullstolen/hjemmeside/flash/produkter/deploy/abrplaypause.swf"                               xml = "xml/abrPlayPause.xml"                                        config          = "xml/config.xml"/>
    </abrMain>
    the abrMain.xml tells the swf what files it shold use, and where to find them, but where do I tell the abrMain.swf to find the xml? Maybe this is an issue for product support instead, though they only answer short and cryptic.
    Murray *ACP* wrote:
    None of your SWF files are found in the location where the page's code places them.
    For example:
    <param name="movie" value="../../../flash/produkter/deploy/abrmain.swf" />
    Did you upload them?

  • Facetime works local but not long distance

    i have been using facetime for 2 years.  Last week (soon after upgrade 8.2)  my service became intermitant.  it works locally,  but long distances it is ringing but no one is answering...
    I am using airport extreme....so not sure if its extreme or something else causing this...

    chris,  thanks so much but i think it has to do with port somehow.
    since i am out of the us it works fine in where i am at,  but trying to get to the us in just rings off the hook and no one can pickup....so it gets a notification that the call is coming through but ends at that point.....and i am just pushing voice only not video.
    other people where i am at use facetime and are able to talk to people in the US...I have been doing so until 1 week ago,  when i downloaded 8.2   Thanks for your reply looking forward to understanding what else i can do......
    ps already installed firmware in extreme...but didn't solve the issue.

  • Report generating on local but not live

    hi Guys,
    its been 2 months to this problem, Crystal report is not generating report on live. i had installed CR for my local laptop and same setup for live. VS 2010. now i got new machine and i downloaded setup for VS2010. but when i opened report by double clicking it said that version is different so i installed older setup which i had on my laptop. the problem is when i create a report locally, it generates report very fine but on LIVE it does not do anything. it does not even create exception. some time there is one error in Even Viewer
    "The description for Event ID ( 4353 ) in Source ( Crystal Reports ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: The keycode assembly, BusinessObjects.Licensing.KeycodeDecoder.dll, cannot be loaded."
    i have researched on it and it seems that this error does not break functionality. could you please tell me any idea?
    thanks

    hi guys,
    now my live and local both are not working... as suggested by Ludek i have tried Process monitor and found some entries which i want to point out. please see below.
    Date & Time:     23/01/2012 14:06:35
    Event Class:     Registry
    Operation:     RegEnumValue
    Result:     NO MORE ENTRIES
    Path:     HKLM\SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Report Application Server\InprocServer
    TID:     6900
    Duration:     0.0000013
    Index:     14
    Length:     48,900
    Date & Time:     23/01/2012 14:06:35
    Event Class:     Registry
    Operation:     RegCreateKey
    Result:     ACCESS DENIED
    Path:     HKLM\Software\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0
    TID:     6900
    Duration:     0.0000056
    Desired Access:     Read/Write
    Date & Time:     23/01/2012 14:06:35
    Event Class:     Registry
    Operation:     RegOpenKey
    Result:     ACCESS DENIED
    Path:     HKU\S-1-5-82-794271414-2547205055-1060673776-2579641347-304524694\Software\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0
    TID:     6900
    Duration:     0.0000059
    Desired Access:     Read
    Date & Time:     23/01/2012 14:06:35
    Event Class:     Registry
    Operation:     RegOpenKey
    Result:     NAME NOT FOUND
    Path:     HKU\S-1-5-82-794271414-2547205055-1060673776-2579641347-304524694_CLASSES\CLSID\{C016CDD4-42F0-4C37-BAEA-31EA6CAF442B}
    TID:     6900
    Duration:     0.0000033
    Desired Access:     Read
    Date & Time:     23/01/2012 14:06:35
    Event Class:     Registry
    Operation:     RegOpenKey
    Result:     NAME NOT FOUND
    Path:     HKCR\CLSID\{C016CDD4-42F0-4C37-BAEA-31EA6CAF442B}
    TID:     6900
    Duration:     0.0000047
    Desired Access:     Read
    Date & Time:     23/01/2012 14:06:35
    Event Class:     Registry
    Operation:     RegOpenKey
    Result:     NAME NOT FOUND
    Path:     HKU\S-1-5-82-794271414-2547205055-1060673776-2579641347-304524694_CLASSES\Wow6432Node\CLSID\{C016CDD4-42F0-4C37-BAEA-31EA6CAF442B}
    TID:     6900
    Duration:     0.0000033
    Desired Access:     Read
    Date & Time:     23/01/2012 14:06:35
    Event Class:     Registry
    Operation:     RegOpenKey
    Result:     NAME NOT FOUND
    Path:     HKU\S-1-5-21-1520874416-994972325-646158445-1014
    TID:     6900
    Duration:     0.0000026
    Desired Access:     Maximum Allowed
    Date & Time:     23/01/2012 14:06:35
    Event Class:     File System
    Operation:     ReadFile
    Result:     END OF FILE
    Path:     C:\Users\FA-Kamran\Desktop\FoodAlert\ClientRC\Code\FoodAlertProj\Reports\TrainingManagement\rptIndividualEmployee.rpt
    TID:     6900
    Duration:     0.0000013
    Offset:     98,304
    Length:     5,120
    Date & Time:     23/01/2012 14:06:35
    Event Class:     File System
    Operation:     CreateFile
    Result:     ACCESS DENIED
    Path:     C:\Windows\Temp\rptIndividualEmployee {8CBD9840-7EA6-482D-8DD2-6DFB920768BF}.rpt
    TID:     40020
    Duration:     0.0000192
    Desired Access:     Generic Read
    Disposition:     Open
    Options:     Synchronous IO Non-Alert, Non-Directory File
    Attributes:     N
    ShareMode:     Read, Write, Delete
    AllocationSize:     n/a
    Date & Time:     23/01/2012 14:06:35
    Event Class:     Registry
    Operation:     RegQueryValue
    Result:     BUFFER OVERFLOW
    Path:     HKCR\CLSID\{F734A321-8381-4FFD-A614-139E8906DC83}\InprocServer32\(Default)
    TID:     6900
    Duration:     0.0000016
    Length:     144
    I am sorry for this long message but i need to fix this as soon as possible. thanks

  • Javascript working locally but not on sever

    Hello,
    Since this is a javascript question I'm ont sure this is the right forum, but since I've always had great help here I thought I'd give it ago, and for all i know , it is DW related...?
    So i have a website that's been online for years, which using a javascript scroller that i found online, a long while ago.
    Yesterday i made some site edits, that didn't (so far as I'm aware) involve messing with any of the javascript or links to external CSS or script files, but suddenly the scroller isn't working any more.
    Oddly though, it works locally in Live Design view, and in all browsers previewed locally too (usinag MAMP server)... but just not online.
    Why did it suddenly stop working?
    Here is al link to a stripped down version of teh problem, and i'd be grateful of any help anyone can offer:
    http://tinyurl.com/scrollernotworking
    Thanks so much in advance,
    Katrina

    Turns out the one-line code was definitely the issue. Now as to why it was being compressed in that way is beyond me.
    Here is a link to a follow up discussion regarding why my code was being minifed (still unsure at time of writing):
    http://forums.adobe.com/message/5401932#5401932

  • XmlSocket works locally but not on webserver

    Hey, so I have an xmlsocket sending info to another server and that all works fine when I test in on my computer (locally) but when I upload the site to my server, the socket fails to connect. I have heard about policy files but dont really understand where to put it and if it's necesary considering it works fine locally. So I am wondering why it won't work on my server, Any ideas?

    waynecto wrote:
    > I'm using flash 7. My application is a weather bug on a
    portal page. I'm
    > getting the feed from yahoo and compile the application
    using
    > System.security.allowDomain("
    http://xml.weather.yahoo.com/");
    and it is working
    > fine when I'm testing from my local machine.
    Well, that has to work both ways. On your site and On the
    giving data server side.
    It needs XML file on the root of the directory allowing you
    to take the data.
    Otherwise we could cross domain people traffic w/o their
    consent.
    So, I don't expect yahoo to drop such xml just for you and
    because that's the case,
    you will need to work around it using proxy on your domain.
    When you request the file from your domain, your domain
    requests it from yahoo and
    hands it off as if it was yours. That's the only way around
    it.
    Best Regards
    Urami
    !!!!!!! Merry Christmas !!!!!!!
    Happy New Year
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • Works locally but not remotely

    Hi,
    I'm loading jpegs randomly into my .fla. It works fine
    locally, and it worked fine when I tested it on my personal
    website. But on my company's site, the jpegs don't load. I'm
    thinking maybe it's a path issue, but not sure what the fix
    is...any help would be welcome.
    This is the code I'm using:
    randomNum = Math.round(Math.random()*15);
    loadMovie(randomNum+".jpg", this.blank");
    I've tried adding a path like
    /graphics/flash/2007jazzfest/this.blank but it doesn't like the /.
    I've tried quotes around everything, but it doesn't work...
    You can see it work at:
    http://www.willyurman.com/Test/jazzfest2007.html
    1. click skip intro to get past the opening
    2. click either small red 'jazz fest' button in the upper
    right or left. It should take you to the credit page where a
    different jazz quote appears at random at the bottom.
    On my work site, everything works except that the quotes just
    don't load.
    I go live with this Friday night(the 8th) so any help would
    be appreciated :)
    thanks
    will

    comment out that code. hardcode one jpeg to load and test.
    does that work?
    if yes, copy and paste the code that works and copy and paste
    the code that fails.
    if not, your path may be wrong or your jpegs may be
    corrupted. to check which, enter the path/file name of one of the
    jpegs in your browser window. if it loads, the path in your swf is
    wrong. if it doesn't load you may have the wrong path in your
    browser and in flash, or your jpg is corrupt.

  • Azure SQL database working locally but not when published to Azure

    I have an
    AngularJS  solution that is connecting to a SQL Azure database.  When
    I run the solution locally, it’s configured to connect up to the SQL Azure database, the solution works fine. However,
    when I publish the solution to Azure the connection to the SQL Azure database does not work.
    When debugging with Chrome I get the error Failed to load resource: the server responded with a status of 500 (Internal Server
    Error) 
    I'm not using EF. but dapper.
    My connectionstring is as follows
    <add name="PortalConnection" providerName="System.Data.SqlClient" connectionString="Server=tcp:xxx.database.windows.net,1433;Database=xxx;User ID="xxx";Password="xxx";Trusted_Connection=False;Encrypt=True;Connection
    Timeout=30;"/>
    When I run the web solution locally from Visual Studio, my sql queries runs like it should, it's only the published version having problems. 
    Any ideas?
    Software Developer

    Hi,
    Thanks for answer.
    I had followed that step by step guide for deploying to Windows Azure. So that was not the problem.
    But I was able to get a better error message by turning off custom error in web.config.
    I got the error message: "Windows login are not supported in this version of SQL Server"
    I solved this by using the SqlConnectionStringBuilder instead of getting the connection string from 
    web.config.
    So everything works great now, just think it's strange it worked locally before..
    Regards
    -entery
    Software Developer

  • Shared Object working locally but not online

    My game records your high score using the sharedobject and while testing it locally it works fine, but when the swf is published and played online, it is not recording the hi score. Is there some sort of new security issue with saving shared objects on people's hard drives now?

    In Frame 1 I have this code. The first is for game progress, the second is for the high score which is then passed to the text object
    var Progress:SharedObject = SharedObject.getLocal("progress", "/");
    var OwlHiScore:SharedObject = SharedObject.getLocal("owlhiscore", "/");
    hisc.mainScore.text = (OwlHiScore.data.HiScore).toString();
    Then on the last frame where the game is over I have this code:
    if (score > OwlHiScore.data.HiScore) {
              hiScoreWon = true;
      OwlHiScore.data.HiScore = score;
      OwlHiScore.flush();
              hiScoreHolder.hiScoreEffect.mainScore.text = (OwlHiScore.data.HiScore).toString();
    } else {
              hiScoreWon = false;

Maybe you are looking for