Rss feeds on home screen

I belatedly have been able to update to belle here in Australia since last week, and I have now lost the ability of updated rss feeds on the home screen. In the nokia conversations article 'Nokia Belle: Six ways to use six screens' from the 12/04/2012 it clearly shows on the second screen example an enourmous orange and white rss feed widget. Why can't I find it on my phone?! Also when I press the store button in the add widget or add short cut screen it tells me that that page is not available and to try again. Will there ever be some more widgets to fill the home screens up with? I probably should wait for the ones that have been on anna that are not on belle to be replaced first!

@michaelmihailou
You may find missing rssfeedwidget in this thread:/t5/Eseries-and-Communicators/New-E7-Belle-missing-some-widgets/m-p/1300385/highlight/true#M101757
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

  • N9 feeds on home screen stopped working

    Hi all... After almost two years with the amazing (???) n9, it stoped working properly. To be precise the feeds in home screen stoped workin. I cant get any new notification from facebook etc. Any ideas??? Is there anything to be done or I should just throw the phone away and buy a better one???? Any help appreciated.....Thanks in advance...

    it is possible that it is not the device so much as an update from those companies on their security profile requirements, which change from time to time.
    if that is the case, then hopefully the community would update the firmware as nokia has not supported that device for over a year now.
    go to talk.maemo.org and look around there.
    if it is a security update, you will not be the only one there that is talking about it, so there should be something there for you to find.
    hope that helps.

  • My startup disk is full. Can I delete 16,255 Google RSS  feeds in Mail screen?

    I began to investigate all avenues to free up my startup disk space. This included deleting photos, movies, downloads, emptying trash, etc. I saved 15.87 GB out of the original 500 GB Mac hard drive. (By the way, everything was backed up to an external 1 TB hard drive). At best, deleting more photos may save me another 5 GB of HDD. Still a drop in the bucket. I then noticed that in my mail screen I have 16,255 Google RSS feeds. I only have 162 Apple Hot and the 16,255 Google RSS feeds. Can I delete the Google feeds and thereby free up disk space by doing that? I still want to use Google and not lose it permanently. Will it work?

    Freeing Up Space on The Hard Drive
      1. See Lion/Mountain Lion/Mavericks' Storage Display.
      2. You can remove data from your Home folder except for the /Home/Library/ folder.
      3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
      4. Also see Freeing space on your Mac OS X startup disk.
      5. See Where did my Disk Space go?.
      6. See The Storage Display.
    You must Empty the Trash in order to recover the space they occupied on the hard drive.
    You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
    Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

  • Help with RSS feed in home page

    I'm trying to place an RSS feed in my home page. I've
    followed this Dev
    Center guide:
    http://tinyurl.com/ewbdv
    I've gotten everything to work perfectly locally. However,
    when I upload
    the files it won't work online here:
    http://tinyurl.com/ootyn
    The error I receive is:
    Could not find the ColdFusion Component
    burnettcom.includes.MM_XSLTransform.MM_XSLTransform.
    Please check that the given name is correct and that the
    component
    exists. The error occurred in
    C:\domains\burnettcom.com\wwwroot\home.cfm: line 28
    26 : <!--- XSL Transformation --->
    27 : <cfinvokeargument name="xml"
    value="
    http://www.burnettcom.com/blog/?feed=rss2">
    28 : <cfinvokeargument name="xsl"
    value="headlines.xsl">
    29 : </cfinvoke></div><!---end posts--->
    Instead of the path
    burnettcom.includes.MM_XSLTransform.MM_XSLTransform.
    shouldn't it be
    burnettcom/includes/MM_XSLTransform/MM_XSLTransform.cfm
    This is the only thing that I can see that would be wrong.
    Can anyone help me to get this to work online?
    Thanks in advance.

    Thanks A3gis, I just got that part working. I've configured
    it to
    display the title and date for each post.
    The only problem is that the date appears as:
    Tue, 18 Jul 2006 04:38:07 +0000
    I would prefer the date to appear as:
    July 18, 2006
    or
    6.18.06
    Does anyone know how to make this work?
    P.S. Here's the xls file:
    P.S. my XSL fragment is:
    <?xml version="1.0" encoding="iso-8859-1"?><!--
    DWXMLSource="
    http://www.burnettcom.com/blog/?feed=rss2"
    -->
    <!DOCTYPE xsl:stylesheet [
    <!ENTITY nbsp "&#160;">
    <!ENTITY copy "&#169;">
    <!ENTITY reg "&#174;">
    <!ENTITY trade "&#8482;">
    <!ENTITY mdash "&#8212;">
    <!ENTITY ldquo "&#8220;">
    <!ENTITY rdquo "&#8221;">
    <!ENTITY pound "&#163;">
    <!ENTITY yen "&#165;">
    <!ENTITY euro "&#8364;">
    ]>
    <xsl:stylesheet version="1.0"
    xmlns:xsl="
    http://www.w3.org/1999/XSL/Transform"
    xmlns:wfw="
    http://wellformedweb.org/CommentAPI/"
    xmlns:content="
    http://purl.org/rss/1.0/modules/content/"
    xmlns:dc="
    http://purl.org/dc/elements/1.1/">
    <xsl:output method="html" encoding="iso-8859-1"/>
    <xsl:param name="ItemsPerPage" select="10" />
    <xsl:template match="/">
    <xsl:for-each select="rss/channel/item[position()
    &lt;= $ItemsPerPage]">
    <xsl:sort select="dc:date" order="descending" />
    <p>
    <a href="{link}"><xsl:value-of select="title"/>
    </a><br />
    <xsl:value-of select="pubDate"/>
    </p>
    </xsl:for-each>
    </xsl:template>

  • Place rss feed on home page

    i'm curious how to place an rss feed in my home page. in
    addition to php
    i can use coldfusion.
    thanks in advance.

    ryansebiz wrote:
    > Mad Dog wrote:
    >
    >> Good luck with it!
    >
    > Thanks Mad Dog. I followed the guide and setup
    everything and it
    > works!
    > Like any good coder, there's one tweak I want to make.
    >
    > Where my blog posts are displayed on my home page, it
    shows the title
    > and date. However, the date appears as "Tue, 18 Jul 2006
    04:38:07
    > +0000" I'd prefer it to appear as "Tue, Jul 18 2006" or
    "Tuesday,
    > July 18 2006". Is this something that would need to be
    done in the
    > ColdFusion page, headlines.xsl file or in my WordPress
    blog?
    >
    >
    > The headlines.xsl blog RSS code is:
    >
    > <xsl:for-each
    select="rss/channel/item/title[position() &lt;=
    > $ItemsPerPage]">
    > <xsl:sort select="dc:date" order="descending" />
    > <p> <a href="{../link}"><xsl:value-of
    select="."/> </a></p>
    > <p><xsl:value-of
    select="../pubDate"/></p>
    > </xsl:for-each>
    >
    >
    > The page CF is:
    >
    > <cfinvoke
    >
    component="burnettcom.includes.MM_XSLTransform.MM_XSLTransform"
    > method="transform"
    > returnvariable="mm_xsl_output">
    > <!--- XSL Transformation --->
    > <cfinvokeargument name="xml"
    > value="
    http://www.burnettcom.com/blog/?feed=rss2">
    > <cfinvokeargument name="xsl"
    value="headlines.xsl">
    > <cfinvokeargument name="ItemsPerPage" value="10">
    > </cfinvoke>
    >
    >
    > How can I get the date to appear as "Tue, Jul 18 2006"
    or "Tuesday,
    > July 18 2006" instead of "Tue, 18 Jul 2006 04:38:07
    +0000"?
    See if these help:
    http://nayyeri.net/archive/2006/04/26/774.aspx
    http://nayyeri.net/archive/2006/04/27/791.aspx
    MD

  • RSS feeds for Error Queues

    We have a requirement to send RSS feeds when ever there is a error message placed in the error queeu. Any inputs on this will be very much useful.

    > Hi,  The RSS feeds for the forums are great.  Any
    > chance of having the same thing for the developer
    > areas?  I'd hate to miss any new materials....
    Hi Kenneth,
    RSS feeds for home pages are on the unfortunately long list of improvements. It is high up there.
    But if you don't want to miss any materials, then you should check out DevToday, which you find under Services.
    https://www.sdn.sap.com/sdn/devnews.sdn?node=linkn2
    It shows only the new stuff that came in within the last I think it is 30 days. You can tailor it to your information interests by rating these objects. You can even create a daily or weekly email from it.
    Gone is the fear of missing good information, Mark.
    P.S. If now only that DevToday page had an RSS feed
    P.P.S. Of course it only works if you are logged in, which by the way everyone using SDN should be.

  • RSS Feeds for developer area...

    Hi,  The RSS feeds for the forums are great.  Any chance of having the same thing for the developer areas?  I'd hate to miss any new materials....
    Thanks!

    > Hi,  The RSS feeds for the forums are great.  Any
    > chance of having the same thing for the developer
    > areas?  I'd hate to miss any new materials....
    Hi Kenneth,
    RSS feeds for home pages are on the unfortunately long list of improvements. It is high up there.
    But if you don't want to miss any materials, then you should check out DevToday, which you find under Services.
    https://www.sdn.sap.com/sdn/devnews.sdn?node=linkn2
    It shows only the new stuff that came in within the last I think it is 30 days. You can tailor it to your information interests by rating these objects. You can even create a daily or weekly email from it.
    Gone is the fear of missing good information, Mark.
    P.S. If now only that DevToday page had an RSS feed
    P.P.S. Of course it only works if you are logged in, which by the way everyone using SDN should be.

  • RSS Feed jumps back to my home page

    I have a Mobile Me Account that points to my own URL. I've been using iWeb to create and update my site, and now I'd like to use the RSS feed so people can get the updates on my blog. However, when you click the RSS button on the site, it just jumps to my home page.
    Can any one help.
    My site is www.teamkleinheinz.com if that helps at all.
    Thanks in advance.

    If the above work, try a reset.
    1. Hold the Sleep and Home button down (together)
    2. For about 10 seconds
    3. Until you see the Apple logo (very important)
    4. Ignore the red slider

  • I am trying to remove all my RSS feeds from my News Folder on the Safari Home page. I can't figure out how to do this. Irving

    I ammtrying to remove RSS Feeds from my News Folder on the Safari Home page. There should be an easyway of doing this but I can't figureit out.
    Irving

    Ok I figured it out myself But for anyone else with the same problem I tried re-setting my network settings and that did the trick. I should have thought of that!

  • Social Feed on Apps being run from Home Screen on KDL65w850c (Android TV)

    Hi all I've recently bought a Sony kdl65w850c, which runs on an Android platform. I love the Social feeds when I'm watching free to air or cable TV, however is there a way I can run these feeds while launching apps from the Home Screen (Netflix, Youtube etc). The feature runs fine when connected to an external device through HDMI, but does not appear to work on the Android TV homescreen?? Any workaround to this? Cheers Rai

    vazandrew,
    Thank you for your reply.  I understand this is a user forum.  While Apple may not directly comment in this forum you can be sure they *are* monitoring this forum.  It may be people, it may be software, but they are watching.  The forums are a treasure trove of data about Apple products, how people use them, what's working, not working, etc.  Apple would be a fool to ignore the content in these forum posts.
    I do appreciate your trying to help with my issue.  I should have added in my original post that my Apple TV is on a wired GbE connection.  I do use wireless on my home network for mobile devices (iphone, ipad, etc.) but never for permanent/static devices like a computer or Apple TV device.  Wireless can not provide nearly the bandwidth of a wired connection nor the low latency.  I'll take the quality of the wired connection over the convenience of the wireless connection every time.
    I've had ISP outages during Apple TV use and never has this caused either the Apple TV to crash nor the app to crash.  When the uplink goes down, the app simply streams what's left in its buffer (usually a few minutes worth of content) and then stops playing while it tries to re-establish a connection to the source.  In my experience the app (any app I happen to be using at the time) has never crashed due to disruption of the WAN uplink.
    I just checked the forums a few minutes ago and noticed that another member has just posted on the exact same issue.  You responded to that user too.  This doesn't seem like a network related issue.  I think this is an Apple TV OS bug and I think we're going to see a lot more posts on this issue in the near future unless Apple quickly fixes the problem.
    Regards,
    Griffith

  • The search bar in the top right hand side of my screen works fine, but the main search bar in the middle of the home screen doesn't at all; do you know how I can fix this?

    I can access bookmarked pages, pages that are on a saved RSS feed, and can search the web using the top right-hand bar on my screen. However, the main bar, in the center of the home page (not sure of the correct name) will not do anything - whether I press search, or hit enter on my keyboard. There also appears to be another bar underneath that, which I can press, but it remains useless.
    My Dad is running Firefox 4 on his computer, and has showed me what it is meant to look like. I can therefore conclude that there is definitely something up with mine.
    I am currently using Firefox 4 with my laptop, which runs Windows 7.
    I have uninstalled and reinstalled Firefox 4, but the problem still remains. I am not keen to use Internet Explorer, purely because I have bookmarked so many pages on the previous version of Firefox but also because I get on very well with the whole layout etc.
    If it comes to it, I am willing to take the risk of losing my bookmarks, but if there are any suggestions at '''''all''''' of how I could possibly fix this problem, I would welcome them.

    Go to this address: http://mycroft.mozdev.org/search-engines.html?country=AU
    Item 24 lists 3 installable major search engines for Australia.
    You can also restrict your search in Google by including ''country:au'' or ''location:au'' or ''city:perth'' (for example) in your search terms. Example: ''city:sydney plumbers'' in the Google search box will list plumbers in cities named sydney.

  • Nokia N8 Contact RSS Feeds

    Could someone tell me if the N8 Contacts include
    RSS Feeds for the Contact, i.e., Facebook... etc. like the X6?
    Link to the Conversation for the selected Contact?
    Anyone have an image of the N8 Contact View?

    i managed to get it working, ended up connecting to the internet all the time, and not disconnecting afterwards but... here's how i did it
    i firstly subscribed to my own & friends rss feed on facebook through firefox, it automatically puts the feed links in the bookmarks toolbar.
    secondly, in ovi suite, i enabled the bookmarks and webfeeds, and then, updated by going into sync and then choose bookmarks and webfeeds.
    it created a new folder in my firefox bookmarks > copied the rss feeds into that folder, and re-synced again..
    then added the new feeds to my own and my friends contact card thing on the home screen... by going into the contact card, rss feeds>accept> select the relivant feed...
    IT WORKS!
    hope this helps, took me ages to do it, but, it works like a charm....

  • Belle update and RSS-feeds

    How put rss-feeds to widget or shortcut as it was in Anna ?
    I have x7-phone

    I have provided some steps below that may help.
    Step 1 – Try completing a soft reset on the device. I have provided the instruction in an article below:
    Power off the device and remove the battery
    http://support.vzw.com/clc/devices/knowledge_base.html?id=33747
    Step 2 – Remove the widget and icon off the devices home screen and clear out the data and cache. I have provided the instruction article below:
    Clear data, Clear cache (if applicable), and Clear defaults
    http://support.vzw.com/clc/devices/knowledge_base.html?id=34831
    Step 3 – Put the device into safe mode. Safe mode is a method that allows the device to run without non-essential applications. This is beneficial for troubleshooting 3rd party applications. I have provided the instruction in an article below:
    http://support.vzw.com/clc/devices/knowledge_base.html?id=34184
    If it works correctly in safe mode, there may be a application not native to the device causing the issue

  • Flash Deal Of The Day RSS Feed Reader

    I need to design a flash widget for MySpace that reads an rss feed and just shows the latest entry. I have seen flash rss feed widgets before but they show all the listings. I need it to check every day at 1:00am for the new one and load it automatically from a third party site (feedburner). I have some knowledge of flash but none in actionscript. I use the Creative Suite CS4. I am a fast learner so please explain in depth so I get the concept.
    Thank you in advance for any help.

    Ok I went through the tutorial in the video and everything seems to be working alright except I need to include links.
    Here is a portion of theXML file that is read:
    <?xml version="1.0" encoding="UTF-8"?>
    <?xml-stylesheet type="text/xsl" media="screen" href="/~d/styles/rss2full.xsl"?><?xml-stylesheet type="text/css" media="screen" href="http://feeds.feedburner.com/~d/styles/itemcontent.css"?><!-- generator="WordPress/2.7.1" --><rss version="0.92">
    <channel>
    <title>SizzleTwist</title>
    <link>http://blog.sizzletwist.com</link>
    <description>Sizzling Hot Prices on Lots of Cool Stuff!!</description>
    <lastBuildDate>Tue, 25 Aug 2009 13:47:54 +0000</lastBuildDate>
    <docs>http://backend.userland.com/rss092</docs>
    <language>en</language>
    <atom10:link xmlns:atom10="http://www.w3.org/2005/Atom" rel="self" href="http://feeds.feedburner.com/Sizzletwist" type="application/rss+xml" /><atom10:link xmlns:atom10="http://www.w3.org/2005/Atom" rel="hub" href="http://pubsubhubbub.appspot.com" /><item>
      <title>Home Surveillance System: Mini Wireless Security Camera</title>
      <description>We invest a lot for our luxury to make life comfortable but while investing in luxury we often forget to protect it and make the life unsafe and unsecure.
    Homeland Security 2.4 Ghz Wireless Motion Activated Security Camera and Receiver is a perfect solution to bring the safest and most ...</description>
      <link>http://blog.sizzletwist.com/index.php/home-surveillance-system-mini-wireless-security-came ra/</link>
       </item>
    <item>
      <title>National Geographic Egana Watch Yellow Chrono NG712GKSY</title>
      <description>You are right; National Geographic did not manufacturer this watch. This high quality watch was made by Egana for National Geographic. Egana is the manufacturer of brands such as Pierre Cardin, PUMA, and Carrera. When I first saw these watches I was not only impressed by the looks but also pleasantly ...</description>
      <link>http://blog.sizzletwist.com/index.php/national-geographic-egana-watch-yellow-chrono-ng712g ksy/</link>
       </item>
    <item>
      <title>High Quality Light Weight Electric Blaster Sunglass</title>
      <description>Quality of sunglasses includes high quality of lens and frame. But the benefit gets multiplied if it is design by the well-known artist.
    The Electric Blaster Sunglasses Trans Brown Stripe with Bronze Lens has high quality of polycarbonate lens, 8-Base Grylamide frame and it is design by the well-known artist- Ozzie Wright.
    Pro-surfer, musician, and ...</description>
      <link>http://blog.sizzletwist.com/index.php/high-quality-light-weight-electric-blaster-sunglass/</link>
       </item>
    The AS code just loads the description when clicked on. I need it to include the link located in the link tags.
    Here is the As code:
    var loader:URLLoader = new URLLoader();
    loader.addEventListener(Event.COMPLETE, onLoaded);
    lb.addEventListener(Event.CHANGE, itemChange);
    function itemChange(e:Event):void
    ta.text = lb.selectedItem.data;
    var xml:XML;
    function onLoaded(e:Event):void
    xml = new XML(e.target.data);
    var il:XMLList = xml.channel.item;
    for(var i:uint=0; i<il.length(); i++)
      lb.addItem({data:il.description.text()[i],
          label:il.title.text()[i]});
    loader.load(new URLRequest("http://feeds2.feedburner.com/SizzleTwist"));
    I want it to display the description then the blog link. As I mentioned I am just beginning with action script so I have no iead what to do.

  • X6 contact rss feeds, how to set them up?

    Hi hope someone can help.
    Iv just got my nokia x6 16gig, and cant figure out how to set up the facebook rss feed for the contacts on the home screen contact bar.
    Hope some one can point me in the right direction.
    Tom

    i managed to get it working, ended up connecting to the internet all the time, and not disconnecting afterwards but... here's how i did it
    i firstly subscribed to my own & friends rss feed on facebook through firefox, it automatically puts the feed links in the bookmarks toolbar.
    secondly, in ovi suite, i enabled the bookmarks and webfeeds, and then, updated by going into sync and then choose bookmarks and webfeeds.
    it created a new folder in my firefox bookmarks > copied the rss feeds into that folder, and re-synced again..
    then added the new feeds to my own and my friends contact card thing on the home screen... by going into the contact card, rss feeds>accept> select the relivant feed...
    IT WORKS!
    hope this helps, took me ages to do it, but, it works like a charm....

Maybe you are looking for