RSS-feeds stopped working

Hello.
All of a sudden all RSS-feeds stopped loading. No RSS counts, Safari doesn't load anything when I click on one. I have tried resetting, removing the preference file, repairing permissions. Nothing seems to help.
I could add that they work perfectly well on my wife's account and a restart didn't do any good either.
I use 2.0.2 and have 152 feeds at the moment. Too many?
Anyone know what to do?
Rikard

Hi rickb
good work on what you've tried so far... I'd suggest cleaning or removing System caches - you might try this... http://www.northernsoftworks.com/snowleopardcachecleaner.html since I've seen it recommended here before.
Failing that, although on paper it mightn't help in this case : try a Safe Boot - holding down the Shift key as your mac starts - then restart normally.

Similar Messages

Iweb rss feed stopped working

About a week ago all of my RSS feeds made through the RSS iWeb Widget stopped working. Some research brought me here: SyntaxError: Unexpected identifier 'any' (anonymous function) www.icloud.com:1
Is Apple not supporting it anymore? That would be a disaster
Message was edited by: Idiot Media

Well yes, the fact that Apple has not supported iWeb for the last 3 years is old news!! Apple has not sold or supported iWeb for at least 3 years and iWeb has not been updated for at least 6 years.
The longer you continue to use iWeb and technology moves forward, the more likely you are to get things that don't work as expected.
Perhaps it is now time to ditch iWeb in favour of alternative software that is actually supported?
There is a lot out there - RapidWeaver, Sandvox, Freeway Pro/Express, WebAcappella 4, Flux V and EverWeb.
With most of these you can try before you buy.

RSS feeds stopped working in Safari and Mail

In Safari, if I click on the RSS box in the webpage address line I get the following error "Safari can't open the page.... The error is: 'the operation couldn't be completed. Operation not permitted' (NSPOSIXErrorDomain:1)". I have tried several websites (Apple, BBC, CNN, ...) - all with the same error
I have a similar problem with RSS feeds through AppleMail. An exclamation mark appears next to all the Mailboxes for all my RSS feeds. This used to work until a few days ago - the only upgrade that I have recently installed is Aperture 3. If I click on the exclamation mark I get the message "there was an error updating the RSS feed 'Apple Hot News'. The RSS feed is temporarily unavailable because an internal error occurred".
I can send / receive regular email without problem
I have tried restarting / shutting down, repairing disk permissions, selecting the 'open in 32-bit mode' for Safari, deleting the Safari.plist and the Safari.RSS.plist files, deleting and reinstalling the RSS Mail feeds - all with no effect. If I log in using a different account, I still get the problem.
I also have an iMac, also running Sno 10.6.2, Safari 4.0.4 and Apple Mail v4.2 (and upgraded to Aperture 3 at the same time as my MacBook). RSS feeds work fine on this machine in both Mail and Safari
Both computers run largely identical applications - iWork, Aperture and Intego Security Barrier. Intego is configured identically on both computers. The Security settings under System Preferences are also identical. Both machines use the same wireless broadband router. Both computers are sync'ed via MobileMe (which seems to be working fine)
I'm at a loss as to what to try next. Grateful for any help. Thanks

Hi rickb
good work on what you've tried so far... I'd suggest cleaning or removing System caches - you might try this... http://www.northernsoftworks.com/snowleopardcachecleaner.html since I've seen it recommended here before.
Failing that, although on paper it mightn't help in this case : try a Safe Boot - holding down the Shift key as your mac starts - then restart normally.

RSS feeds not working in Mail

Hello Everyone,
My RSS feeds stopped working on April 12th. Two of them have given me feeds today but nothing from yesterday or the day before or the day before that. Very strange. I've tried quitting Mail, restarting my computer, control clicking on the individual feeds and folders and clicking update all feeds and the specific feeds. Any other tips?
Thank you very much!

Not sure if this counts as 'fixing' the problem; but here's what I did:
* Moved ~Library/Mail to someplace else (I picked my desktop)
* Open mail.
* Watch as .Mac pulls in the configuration that was synced to .Mac.
* Wait to download new mail (IMAP headers)
I did have to manually copy the mail rules .plist, but other than that, things seem to be working as I want them to.
Somehow, RSS started working.

RSS feeds not working.

So somehow my rss feeds stopped working. This happens for all my rss feeds (about 9) except for 2. Also one web isn't working for me either it's just stuck at the 3rd of october update... When I use a proxy the web page does work so I'm guessing the problem is there. I should clarify that I do have other mac's and pc's in the house and they are working fine, so I don't think this is a problem by my ISP. Any suggestions?? Thanks

Might give a try with Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
As long as you don't have a USB connection in tandem with a UPS, which can cause problems.

How do I get the RSS feeds to work in iWeb'08 when published to FTP server?

There are so many unresolved questions because I have published to an FTP server (Netfirms). HOWEVER, my next task at hand is to resolve the issue of a non-working RSS feed and download capabilities.
The published website is www.vibrationalvoyages.com.
When using Cyberduck to upload to Netfirms, I have to call the file name vibrationalvoyages.com because Netfirms organizes my files under a main folder called www (I also purchased the .org and .net extensions along with the singular spelling of the title, have forwarded those url's to the .com extension, which means I have different website names under Netfirm's main folder www, all pointing to www.vibrationalvoyages.com).
I have to drop the www. in front of vibrationalvoyages.com when publishing to a folder on my computer so, when Cyberduck uploads the files into the main www folder, they are read correctly and published as www.vibrationalvoyages.com. In Cyberduck, the ftp address to upload is vibrationalvoyage.netfirms.com
Before uploading, I use iTweak to insert the Statcounter tracking codes. Then, I use Rage to optimize the site to cut down on the weight (lots of photos). Then, finally, I get to upload which takes about an hour and a half.
SO, HOW DO I GET THE RSS FEEDS TO WORK AS WELL AS THE OPTION TO DOWNLOAD AN MP3 RECORDED MEDITATIONS? I eventually also want to include the download option of podcasts.
Please help! I am doing the best I can to stay in love with Mac but he is turning out to be a pot load of work and the love affair is wearing a little thin.
I haven't even asked about why iWeb still calls some pages 'The family picnic" or why it switches the url addresses to the individual pages. Probably because in the early stages, I copied an entry rather than just do a new one... but I'll worry about that later. I want to get this 'fixed' first and then I'll address the issue, following Roddy's advice to another writer about installing a flash player, for easy download of the MP3 meditations and for when I record the lessons as podcasts. Until I get this RSS issue resolved, however, podcast downloads are out of the question!

Thank you for checking, Tom,
I'm confused. What do YOU get when you push the feed button? And why is it working on yours and not either of my machines?
Today, my Mac (w/Safari 4) gets the same error message: Safari can’t open the page Safari can’t open the page “feed:http://vibrationalvoyages/vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml”. The error is: “The feed could not be loaded because the content is not in a known feed format.”
My little ASUS (with a Linux operating system) gets a screen that says "The requested URL was not found". The URL on that page is http://vibrationalvoyages./vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml
On both error messages, the URL I was checking was:
http://www.vibrationalvoyages.com/DivineLight_Vibrations_Principles_and_Applications/Divine_Light_Vibrations_Principles_ andApplications.html
The last URL was, of course, the URL generated by iWeb.
So, my question still is:
HOW CAN I GET MY FEEDS TO WORK PROPERLY? If the problem is there shouldn't be an http:// after feed: then, how do I get iWeb to set it up properly?
Any ideas?
GG

HP LaserJet 1536dnf MFP document feeder stopped working

The document feeder stopped working. It clicks when trying to feed and comes up with the error Document Feeder Mispick, reload. I cleaned the feed rollers as per the HP video, no change. Is this something I can easily fix myself (I can open screws and lubricate parts if necessary)? Any suggestions?
Thanks.

Hi @Solray,
Welcome to the HP Forums!
I noticed that your document feeder has stopped working on your HP Laserjet 1536dnf MFP printer.
There are two guides available that you can follow:
'Document feeder mispick' Message Displays on the Control Panel and the ADF Does Not Pick Up Paper o....
'Doc. feeder jam', 'Open door and clear jam', or Other Jam Message Displays on the Printer.
If you have done all those steps already, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope these guides help, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Officejet Pro L7590 printer auto document feeder stopped working

HP Officejet Pro L7590 (Model: CB822A)
Mac OS X Yosemite 10.10
My automatic document feeder stopped working about a month or two ago. If I put a bunch of papers under the tray there is no beep/light to acknowledge that. So, I can't copy a bunch of papers at once.
Is there a recommended HP repair center/store in my area that can fix it? I'm in Bethesda, MD 20817.
Thanks
This question was solved.
View Solution.

Hi @rustyblue
Although HP does not have an authorizes repair facility that I can refer you to, I have located 2 helpful documents that would allow you to troubleshoot the issue yourself;
An 'Original Jam: Clear jam, and then press OK' Message Displays for HP Officejet 6100, 7100, and D ...
Automatic Document Feeder (ADF) Does Not Pick Up Paper
If the issue persists, you can take the printer to a local mom and pop shop, or maybe call HP. HP could offer you a discount on a newer model.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Help Please, RSS Feed Not Working! :(

Hello there,
I'm having a hard time getting my RSS feed to work correctly with subscribers and am at my wits end. I cannot seem to wrap my head around it.
I (ideally) wanted to get both MP3 and M4A file formats working to please both crowds or subscribers. So the iTunes subscribers can subscribe to the M4As and the other listners can subscribe to the MP3s.
Anyway, I deleted and recreated the feed on feedburner here, but it's still not resolving. I've deleted the feed countless times, reinstalled iTunes, and tried it on 4 different computers, and even had other people
Any ideas why iTunes will not resolve the feed? If you look at the main page the files play correctly and without issue via the flash player.
www.playedpodcast.com/feed
Thanks in advanced guys!

Fixed!

RSS Feeds that worked prior to SP2, now do not work

I am working with SharePoint 2010 Enterprise edition. We have several wiki pages with RSS feeds that have been working well for a while. Once we added the SP2 patch, the RSS feeds no longer work unless the page is checked out.
Once checked out, you can set them up, see the feed and all is good, until the page is checked in again.
I tried removing the RSS feed and recreating it and have the same issue, works fine until the page is checked in.
Could someone help direct me to a solution? I looked through many forums on RSS feed errors and haven't seen anything helpful. Thanks!
staci

Hi staci,
It was a known issue from 2013 February CU and it had been fixed in 2013 June CU, however you can also install 2013 August CU for your SharePoint 2010 per the following article, this issue disappers without any side affects, you
can take a look.
http://richardstk.com/2013/11/01/rss-viewer-web-part-stops-working-after-installing-sharepoint-2010-sp2/
Thanks
Daniel Yang
TechNet Community Support

Spry RSS Feed widget works in IE but not Firefox or Chrome

I've been trying to use the Spry RSS Feed widget (6/9/2011 - via the Widget Browser) to feed a Wordpress blog I have onto my site. I customized the widget and installed the widget to my page, but it only works in IE (Version 8), and not in Firefox (9.0./1) or Chrome (16.0.912.63 m). I thought maybe I had something conflicting with it on my page, so I even tried inserting into a completely blank page, but I get the same results.
I've scoured the web for options to get this feed onto my site, and found PHP solutions, and a bunch of other tools, but I'm not much of a coder, and haven't been able to get them to work at all.
I'm using CS 5.5
Any recommendations?
Thanks!!
Here's the code from the blank page I tried:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<script src="SpryAssets/SpryData.js" type="text/javascript"></script>
<script src="SpryAssets/xpath.js" type="text/javascript"></script>
<link href="SpryAssets/SpryStackedContainers.css" rel="stylesheet" type="text/css" />
<script type="text/xml">

</script>
</head>
<body>
<script type="text/javascript">
// BeginOAWidget_Instance_2567023: #OAWidget
var ds1 = new Spry.Data.XMLDataSet("http://rss.cnn.com/rss/cnn_topstories.rss", "rss/channel/item");
ds1.setColumnType("description", "html");
// EndOAWidget_Instance_2567023
</script>
<div spry:region="ds1" class="StackedContainers">
<div spry:repeat="ds1" class="RowContainer">
<div class="RowColumn"><a href="{link/@href}">{title}</a></div>
<div class="RowColumn">{description}</div>
</div>
</div>
</body>
</html>

The problem is that XML data cannot be transmitted cross domain.
This example, http://pleysier.com.au/rss/, uses Spry.Data.YQLDataSet to overcome the limitation, see here https://github.com/3rd-Eden/Spry-YQL-DataSet
Gramps

Iweb rss feed not working

I published my website (www.nigelreblochon.com) to a folder, then uploaded (using cyberduck) to my webhost. For it to work properly there, I had to remove all items from the folder iWeb created for my site (lets call the folder nigel). The site works fine except for the fact that the podcast feed no longer works because the files needed are no longer in the "nigel" folder. What to do, I would give up the rss feed if there is no other solution. Any help would be apreciated.

well, i didi that. only problem is the index.html
that was sent with the iweb folder was for my .mac
site instead of the nigel site (since iweb always
publishes EVERYTHING! instead of just something.)
If you have multiple sites inside iWeb, then to have the index.html refer to the nigel site, just make sure that the nigel site is at the top of the list in the site organizer when you publish to your local drive.
am
i right in assuming that setting up a new user
"nigel" and working on iweb from there would rectify
my problem.?
Yes, as long as nigel is at the top of the list of your sites (or the only site of course) inside iWeb when you publish. You could make it the only site by putting a copy of your Domain file in the appropriate place in the new account and opening iweb and deleting the other sites.

RSS feed not working correctly

I have several RSS feeds and have for a while. All of a sudden, one feed (NYT Travel) started coming into my InBox as well as into its RSS box. If I delete the article from INBox, it's deleted from the RSS box. Same in reverse. However, I can't move them from InBox to RSS box and they're clogging my InBox. Other feeds are working fine. Can anyone help? Thanks.

I had the same problem. I didn't knowingly do anything. In the past when that happens the whole thing moves up to the inbox & I can click on the down arrow that shows up next to it. Not the case this time.
To fix it do this:
Right click on the RSS feed in the left column. There is a popup menu that gives you the option to "View in inbox" which probably got turned on, uncheck it.

RSS Feed not working in chrome browser for anonymous users but working fine in IE

HI All,
We are having public facing site for anonymous users. We have created links for OOTB RSS feed for lists and libraries. The link is working fine in IE, but for chrome it is asking for credentials. We are using publishing site. Any idea or pointers is much
appreciated. We are in testing phase and this issue sticking us.
Rohit Pasrija

Hi,
According to your description, my understanding is that you want anonymous user access RSS feed link without asking for credentials.
I suggest you can check if you have deactived the “Limited-access user permission lockdown mode” feature in the site settings-> site collection features
In my environment ,after disabling the feature, then the rss feed link will be accessed without credentials for anonymous users in Chrome.
Thanks
Best Regards
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jerry Guo
TechNet Community Support

How do I get RSS Feeds to work in Kerberos?

Hi,
I am migrating from sharepoint 2010 to sharepoint 2013. The SharePoint 2010 site used kerberos and I have kerberos working for the migrated site in 2013 (kerberos). However, the RSS feeds on front page show error
An unexpected error occurred processing your request. Check the logs for details
and correct the problem.
It would be good to know what SPN settings are required for which specific server account in 3 tier farm.
Help would be really appreciated.
Thanks.
John.

Kerberos is not a pain. It consists of Service Names and/or Delegations. That's it.
Kerberos does not really care about which server your running on. It cares about the service name and the security principal.
So the service you log on to has a name: intranet.contoso.com - you need to register an spn for that;
You need to register the service name with the account running it. Basically that is the context your service is running in and that needs to be the same across the domain. aka you cannot have two services with the same name, running with different service
accounts. (Who is then the owner of the service?)
HTTP/intranet.contoso.com <Application Pool Account>
If your RSS is comming from that service name, you're good to go. But in your case, it seems that the RSS is comming from another service name. So make sure that is also registrered, using the same principal as the above.
Note: the service type can be different. HTTP, MSSQLSvc, WSMan, MSOLAPSvc.3 etc. This will depend on your service type. All web requests are HTTP. This is not a protocol, but a service type.
Now in order to pass your credentials from service1(intranet.contoso.com) to service2.(extranet.contoso.com) you need to enable the delegation. Delegation basically allows your service account, to take your ticket and pass it on to another service.
So under your service1 service account, you enable delegation towards the service2 name.
References:
https://technet.microsoft.com/en-us/library/cc961723.aspx

RSS-feeds stopped working

Similar Messages

Maybe you are looking for