RSS Link List doesn't work

Hi gurus,
We are created a web page using web page composer and tried to add a RSS link on the page. We wrote a URL of a website which supports RSS and tried to drop on the web page we created. When we tried to drop in on the page, it starts to work but nothing happens. It just hangs.
I implemented the note 1237556 but useless. I tried in our other portal system but the same error.
Any suggesstions
Tolga

Hi Tolga,
Did you resolve this issue you was having the the RSS Link List in Web Page composer?
If so can you please provide details how you fixed it as i'm having the same issues.
Regards
Mark

Similar Messages

How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.

How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.

Not sure which driver you mean when you say "the driver in the Mac's list". Apple does not provide a driver for this device, so if you mean one of the default printers that are included with 10.6, like the Generic Postscript or Generic PCL, then these will only work if the optional PS or PCL print kits were installed in the machine. Given your inability to print then it would seem that you have neither kit installed. So this would require you to install the Canon UFR2 driver, which you can obtain via this link.
With the UFR2 driver installed, you add the printer using IP > LPD. Enter the IP address of the iRC2380, leave the Queue name blank and change the Name to iRC2380. Leave the Location field blank and in the Print Using menu, browse to the "Canon iR C2380/2550 UFR II (UK)". Click OK and then Add to complete the queue creation. You should now be able to print. Please reply if it does not work.

X-fi Extreme Gamers not in IRQ list, doesn't work at all.

9X-fi Extreme Gamers not in IRQ list, doesn't work at all.O Lo mates,
my specs:
Intel C2D E8500
Gigabyte GA-EP45-DS3R
Club3D ATi 4870 52MB
2GB OCZ
2 WD Raptors connected to onboard raid controller
X-Fi in PCI slot
my problem:
The X-fi isn't working as it should. It's not getting detected in bios / POST so it can ofcourse not be working in any OS (currently running Win7 7068
I used to own a AMD 2500 / Asus A7N8X-E deluxe, and it used to work, but when I upgraded to a C2D E6600 / DFI Infinity it only showed up 3 times in my IRQ list / OS. This ofcourse is to blame to Creative, because they dont care about the PCI standard and didn't implement IRQ resource sharing in the Extreme Gamer card. After upgrading to my current setup (listed above) it's still not working at all, even though I tried disabling all onboard devices I dont use, and manually mapped IRQ channels to the PCI ports so they wouldnt share.
The X-fi is fine, I recently put it in another pc with another brand motherboard, and it was detected instantly. Guess the guy who owns that pc had some luck with his motherboard don't feeling the need to share IRQ's at that particulair moment... its like Russian roulette.
Is there anything i can do to get the soundcard to work even though it doesn't implement the PCI standards and therefore in my opinion failed as a soundcard and as a brand as a whole?
Greats,
eXistenZ
Message Edited by existenZNL on 06-24-2009 02:34 PMMessage Edited by existenZNL on 06-24-2009 02:35 [email protected]

= Hey mate:
Havent seen your exact bios, but if you have a setting in it, called? reset [color="#000080" size="3">Extended System Configuration Data.
Then that might shuffle your bios, per se and then let that card be redetected. I used to use that on my systems when swapping one single part in order to get all the IRQs to shuffle around again, and give one to my card. Do you remember when the magic number to give to your Creative card was IRQ 5, DMA Low of , DMA High of 5, address of 220 and port of 330? Well that is how I used to get my system to shuffle my printer ports and modems in order to bump that sound card to get the correct addresses. Also check to see if the edges of your sound card are blackened. Wipe them with your fingers and see if there is an ashy burned residue. This will tell you if that card has been electrically damaged, or oily/dirty. Also the backlplates on some sound cards are slightly bent and your sound card will fit into its slot, but not all the way. A hair off and that card will be picked by your system every couple of boots.
Try this and let me know how it goes for you.

Clicking an element in a list doesn't work

Sorry about my rather vague subject - my problem is not so easy to sum up in a few words.
I am working on an application that
- Displays a list of items from a MySQL table
- Each item should be clickable, and on clicking should open an edit page with the clicked item pre-loaded
This must have been done millions of times before and should be simple. It doesn't work, presumably because I know too little. This is what I have done:
The clickable item list looks like this (without all the trimmings):
<h:dataTable id="users" value="#{userlist.userList()}" var="ul">
<h:commandLink action="#{ul.edituser}" value="#{ul.uid}"/>
This displays a list of the right sort of items, but the clickable item (the UID) doesn't do anything. Also, the resulting html looks the same no matter what I put into the action element - this is the inside of the a-tag:
href="#" onclick="mojarra.jsfcljs(document.getElementById('j_idt9'),{'j_idt9:users:1:j_idt15':'j_idt9:users:1:j_idt15'},'');return false"
I'm not entirely sure what that means; all I know is that it does not call the edituser() method.
But what is the right way, then? I haven't found any examples that highlight this particular situation although it must be used all the time, I expect.

#{userlist.userList()
#{ul.edituser}Spot the difference there. I do believe "ul" should be "userlist"; in other words it will link to an action method "edituser()" in a JSF managed bean which I assume will be named Userlist. Its really simple when you run into the problem of an action method not working: 99/100 times the action method EL declaration is wrong. Now it could be typo, but I've been known to forget the #{} part too...
I use the JBoss Tools Eclipse plugin myself; it has nice JSF additions that add EL validation and autocompletion to the editor. That way I know already from the code view when I've made a mistake in stead of "at runtime". A missing action method turns up as a warning in the jsf editor for example. That is of course only helpful when you're actually using Eclipse ;)

Accessing Collaboration Room with Room Link (URL) doesn't work

hi all
i'm trying to access a collaboration room by room link (url) but it doesn't work. the room url is: https://www.sportal.ch:443/irj/index.html?NavigationTarget=CollaborationConnector://portal_content/com.sap.ip.collaboration/Rooms/b0ce78ec-3f30-2910-2184-b171271d4d95/workset&NavTargetAsRoot=true
i have checked the roombackend-properties => they are ok
i have checked the roles and permissions => they are ok
what me surprises: when i open a new browser window and type in the mentioned url, our portal-start-page is displayed but in the content area there is no content displaied. i expected, that when i type in the url, then the authentification-dialogue would appear, but it does not.... (does this url only work if i am already logged in the portal??)
if you have any ideas, how the problem could be solved, please let me know!
thank you for your help.
greetings
flo

hi ingo
thank you for the input. i have now solved the problem, perhaps my solution fits for you too. here it is:
when i use the function "send room-link" the url looks like this:
https://www.sportal.ch:443/irj/index.html?NavigationTarget=CollaborationConnector://portal_content/com.sap.ip.collaboration/Rooms/9020275c-8348-2810-28a6-a8c1ae60e192/workset&NavTargetAsRoot=true
with this url i can not access the collaboration room.
but when i change the url like this:
https://www.sportal.ch/irj/portal?NavigationTarget=ROLES://portal_content/com.sap.ip.collaboration/Rooms/9020275c-8348-2810-28a6-a8c1ae60e192/workset&NavTargetAsRoot=true
now i can access the room (with authentification).
OK, for me the main problem is solved, but can someone perhaps tell me whats the difference between:
NavigationTarget=CollaborationConnector
and
NavigationTarget=ROLES
thank you for your help!
greetings
flo

IPad 4 with iOS 8 "read list" doesn't work

After updating to iOS 8, read list feature in Safari doesn't work animore!!!((( I can not read articles without the intertnet!
And also, Apple, come on, make iWork for free for rest of you costomers! It's ridicules to pay 30$ just only because that I bought the iPhone 4 and iPad 4 erlier...and even by highest price!

Hi
Sorry for being too nitpicky - BUT
You indicate iOS 8.1.2 on iPhone 4
Either you have a 4S or you have iOS 7.x
But with that said
Can you please check Settings -- General -- Accessibility - scroll down to Interaction -- Call Audio Routing and see if Automatic is checked?
Thanks

Links that doesn't work

Hello.
I'm a graphic designer. I've made an ebook built with Indesign CS5. This ebook have links (internal links). When I open that ebook (saved as a pdf file) in Adobe reader it looks and works perfect but, if I open it with Adobe Digital Editions some links works and some others doesn't work. I don't know why this is happening if I done the links by the same way.
Hope that someone will help me.
Thanks!

The buttons should have worked. Kindly run the code in Debugger mode once and try to understand what is happenning that stops the links. May be going through the log would also be useful. Still if you dont see something, log a service request against Oracle.

Setting up Find my Iphone ap and it says to verify my Apple ID. I do that and the email comes in with the "Verify Now" link, which doesn't work. What next?

Link to verify apple id that I get in my IN box from Apple doesn't work, what next?

Go here, click on "Manage My Apple ID", see if you can verify here:
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

Where used list doesn't work for global data

Hi,
When i try to do where used list on a constant in an include, it doesn't give the results for classes.
The class contains the include in a method that uses the constant, and the where used list for that constant doesn't find the appearance of the constant in the class.
I tried to look for oss note that solves the problem but i couldn't find any.

I tried to update the navigation index but it still doesn't work. from my debuging i found out that it just doesn't look in classes, all classes. I mean even in the where used itself there is not an option for used in classes. I checked it and it's a generic problem of the where used list for global data.
Edited by: Cohen Lior on Apr 14, 2010 6:52 PM

Cascading Select List Doesn't work properly

I am trying to use Cascading Select List in My Application. It works for the first time when I run the page afterwards when I try to open the same page in a different window it doesn't work afterwards it doesn't work at all.My code is as follows.
1) Application Process with name getDet
DECLARE
lv_os_List varchar2(32000) := '';
platform varchar2(50);
err_code number;
err_msg varchar2(200);
BEGIN
owa_util.mime_header('text/xml', FALSE );
htp.p('Cache-Control: no-cache');
htp.p('Pragma: no-cache');
owa_util.http_header_close;
htp.prn('<select>');
HTP.prn ('<option value="' || 1 || '">' || '- All OS -' || '</option>');
select platform into platform from platform where platformid =:P139_PLATFORM;
if platform = 'Sun SPARC' then
for i in (select os , osid from ostype where os like '%Sola%' order by os) loop
htp.prn('<option value="' || i.osid || '">' || i.os || '</option>');
end loop;
ELSIF (platform ='Linux (x86 & x86-64)') then
for i in (select os ,osid from ostype where os like '%Linux%' or os like '%RH%' or os like '%SLES%' or os like '%OEL%' order by os) loop
htp.prn('<option value="' || i.osid || '">' || i.os || '</option>');
end loop;
ELSIF (platform ='TRU64') then
for i in (select os ,osid from ostype where os like '%Tru64%' order by os) loop
htp.prn('<option value="' || i.osid || '">' || i.os || '</option>');
end loop;
ELSIF (platform ='Windows') then
for i in (select os ,osid from ostype where os like '%Windows%' order by os) loop
htp.prn('<option value="' || i.osid || '">' || i.os || '</option>');
end loop;
ELSIF (platform ='IBM Linux on Power') then
for i in (select os ,osid from ostype where os like '%Linux%' or os like '%RH%' or os like '%SLES%' or os like '%OEL%' order by os) loop
htp.prn('<option value="' || i.osid || '">' || i.os || '</option>');
end loop;
ELSIF (platform ='IBM System z') then
for i in (select os ,osid from ostype where os like '%Linux%' or os like '%RH%' or os like '%SLES%' or os like '%OEL%' order by os) loop
htp.prn('<option value="' || i.osid || '">' || i.os || '</option>');
end loop;
ELSIF (platform like 'HP%') then
for i in (select os ,osid from ostype where os like '%HP%' order by os) loop
htp.prn('<option value="' || i.osid || '">' || i.os || '</option>');
end loop;
ELSIF (platform ='Itanium') then
for i in (select os ,osid from ostype where os like '%HP%' or (os like '%Windows%' and osid <> 201) or os like '%Linux%64%' or os like '%RH%64%'
order by os) loop
htp.prn('<option value="' || i.osid || '">' || i.os || '</option>');
end loop;
ELSIF (platform ='AIX') then
for i in (select os ,osid from ostype where os like '%AIX%' order by os) loop
htp.prn('<option value="' || i.osid || '">' || i.os || '</option>');
end loop;
ELSE
for i in (select os ,osid from ostype order by os) loop
htp.prn('<option value="' || i.osid || '">' || i.os || '</option>');
end loop;
END IF;
htp.prn('</select>');
EXCEPTION
WHEN OTHERS THEN
err_code := SQLCODE;
err_msg := substr(SQLERRM, 1, 200);
INSERT INTO ERROR_TABLE (error_number, error_message)
VALUES (err_code, err_msg);
END;
2) Application Item
CASCADING_SELECTLIST_ITEM_1
3) In the Footer of the region which contains the items the following Java Script
<script>
function get_select_list_xml(pThis,pSelect){
var l_Return = null;
var l_Select = html_GetElement(pSelect);
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,
'APPLICATION_PROCESS=getDet',0);
get.add('CASCADING_SELECTLIST_ITEM_1',pThis.value);
gReturn = get.get('XML');
if(gReturn && l_Select){
var l_Count = gReturn.getElementsByTagName("option").length;
l_Select.length = 0;
for(var i=0;i<l_Count;i++){
var l_Opt_Xml = gReturn.getElementsByTagName("option");
appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'),
l_Opt_Xml.firstChild.nodeValue)
get = null;
function appendToSelect(pSelect, pValue, pContent) {
var l_Opt = document.createElement("option");
l_Opt.value = pValue;
if(document.all){
pSelect.options.add(l_Opt);
l_Opt.innerText = pContent;
}else{
l_Opt.appendChild(document.createTextNode(pContent));
pSelect.appendChild(l_Opt);
</script>
<script>
get_select_list_xml($x('P139_PLATFORM'),'P139_OS');
</script>
For the first Select list form element properties
onchange="get_select_list_xml(this,'P139_OS')"
Please let me know what change I need to make in the code.

Vikas,
Is your page 0 a public page or it requires authentication? I remember having the same
problem a while ago.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/apex/f?p=107:7
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Wish List doesn't work right

For a couple of days now, my wish list has not worked properly.
I have a lot of items on my wish list, mostly albums, so they do not all fit on one page.
Now when I access my wish list, the first page works fine. It displays everything correctly and I can use the buy buttons to purchase the items.
But when I try to access the second page, it won't work. The album covers are not displayed at all and the buttons aren't working. I can also not remove any items from my wish list when they are on the second page. It is also not just a problem with the albums. It is the same with single songs.
Also, when I choose to sort the items on my wish list in a different way (e.g. name) instead of the date I added them to my wish list, it causes the same problem as going to page 2. I have no idea what is going on.
I had recently installed a new driver for my video card, so I tried the old one, but the problem was still there. Since that was the only major change to my system I have no idea what else to try.
I hope somebody her can help me.

I think folks are looking for a solution.
And I have given one. The Palatino font supplied with Mavericks is no good. The only fix is to replace it with an older version. If you don't have one, you can't fix it.
Do you agree that Restore Standard Fonts...works ... Yes? No?
No. That option only attempts to remove fonts from the System and root Library folders that are included with OS X. It doesn't give you an option to restore OS X supplied fonts that are missing.
I have to presume you installed Mavericks over Mountain Lion. In Mavericks, Palatino is installed to the /System/Library/Fonts/ folder. In ML, that same (correctly working) font is installed to the /Library/Fonts/ folder.
Presuming this scenario is correct, the working version of Palatino in the /Library/Fonts/ folder was already active. When resolving conflicts in Font Book, the active font is always the one left active. Which would mean it removed the broken, Mavericks installed version.
As noted above, I fully tested and have proven the Mavericks version of Palatino is bad. I have multiple versions of this font. They are from:
OS 9
MS Office 2011
Lion
Mountain Lion
Mavericks
Adobe Type 1 PostScript
Adobe OpenType PostScript
I used Suitcase Fusion to activate one version at a time. Testing in Word, InDesign and other apps, they all behaved as expected until using the Mavericks supplied version.

10.2.0.424 search partial number in the call list doesn't work

The scenario is this
I remember I've been call from one number.
I only remember one part of the digits
Let's say 6532
I go to call list and go to use the search function
No results, but scrolling the call list and wasting a lot of time, I see that I was remembering correctly that number.
What is The point of having databases and a search function that doesn't work?
Thank you for replies and opinions
Cor

Toggling these items to OFF in the Hub settings prevents the messages from these sources from appearing in the main Hub view. This does not (currently) remove them from the Hub entirely. It's possible we may see that option in an upcoming OS release.

Instant client 10.2.0.3 used with ms sql linked server doesn't work

Hi,
instant client version 10.2.0.3 doesn't work as microsoft sql linked server (both 2000, 2005) while 10.2.0.1 does. (tested by overwriting files in instant client directory - basic instalation, then restart mssql services) - the message is, that the oracle client is not installed when running sql (registration of linked server is ok).
Is it a known issue or is there any workaround?
(Windows XP, 2003, MS SQL 2005, MS SQL 2000, Oracle 9.2.0.6)
Thanks,
Pavel

I installed oracle-instantclient-basic-10.2.0.3-1.i386.rpm on a redhat box to
connect oracle database server 9.2.0.8.0 install on win box.Is there any other Oracle software installed on the RedHat machine?
In which directory did you install Instant Client?
Can you login with sqlplus?
On the database server, I defined parameters like this :
NLS_DATE_FORMAT='YYYY-MM-DD HH24:MI:SS'
NLS_NUMERIC_CHARACTERS='. 'This will have no effect on your problem - these are client environment variables.
Before starting apache (lampp) I set Oracle environement like this :
export NLS_DATE_FORMAT='YYYY-MM-DD HH24:MI:SS'
export NLS_NUMERIC_CHARACTERS='. '
My application worked very fine.
BUT a few days ago (1 week), in my application, the date format display wrong,
I have this format : DD/MON/YYYY even with
export NLS_DATE_FORMAT='YYYY-MM-DD HH24:MI:SS'
before starting apache.The ancient question: Do you remember what you changed before it stopped working?
So I stop my apache and try set Oracle environment like this :
export ORACLE_HOME=/usr/lib/oracle/10.2.0.3/clientAs has been said, do away with that.
export PATH=$ORACLE_HOME/bin:$PATHYou don't need that either.
Except is might be nice to have the directory that contains sqlplus in PATH.
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATHNow that surprises me.
Normally, instant client shared libraries are not installed in a subdirectory.
Does this "lib" directory exist?
You should add the directory containing the *.so files to LD_LIBRARY_PATH.
When I restart apache and test my application, an error php message occurs :
Ocisessionbegin error while trying TO retrieve text FOR error ora-12705
I check my oracle_home, I don't think I make a mistake?It seems that Oracle cannot find the instant client shared library libociei.so.
This library must be found in LD_LIBRARY_PATH.
In this context it would be interesting to know (as I asked above) if any other Oracle products are installed on this machine.
Yours,
Laurenz Albe

Firefox links/javascript doesn't work at all on OS 10.5.8

Hi, I have downloaded new Firefox 3.6 for my OS 5.8 (previous version was running fine) and it doesn't work at all. Links do not work, address bar does not open sites, period. I deleted the previous version and now I am stuck-I can't find it anywhere, and I want to get rid of this "upgrade". Safari works fine with my system. It looks like the javascript problem...what to do?
== This happened ==
Every time Firefox opened
== I installed new Firefox ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; PPC Mac OS X 10_5_8; en-us) AppleWebKit/530.19.2 (KHTML, like Gecko) Version/4.0.2 Safari/530.19

Can you start in Firefox safe mode? See [[Safe Mode]]

EA6350 Device List Doesn't Work Correctly

Device list doesn't show all devices on the network. Some are shown OFFLINE when in fact they are ONLINE.
Other devices that are connected don't even show up at all.
For instance, I have 15 devices on the network, some wired and some wireless, but only 10 devices show in the device
list. The other devices have connectivity but never show in the device list.
Called support and was told to update firmware and reset the router. Tried all of that but to no avail.
The device list is still incorrect.
When will Linksys engineers fix the firmware?

Make sure that your devices are set to obtain an automatic IP address. Check some of the devices which appeared on the list. It could be that some devices have multiple addresses listed below them, and if such is the case of your network, I suggest you inform Linksys Support about it.

RSS Link List doesn't work

Similar Messages

Maybe you are looking for