RSS Problems not fixed with 10.5.2

I've upgraded to Mac OS 10.5.2 and I'm still having the same problems with RSS feeds as I did before in both Mail and Safari. I am unable to receive new RSS articles to Mail or Safari. Apple said that this issue was fixed with 10.5.2 but it wasn't for me. Please help.
Message was edited by: slh06

After reading about the problem in the April issue of MacWorld, page 96 I think, I brought the computer over to the Apple store, showed them the article, and they ordered me a new graphics card (well, it was a little more difficult and time-consuming than that, but you get my drift) - a more recent version of the card.
Et voila!!! No more screen junk. Isn't that kewl?

Similar Messages

Why RSS does not work with my OS X 10.8.2?

Why RSS does not work with my OS X 10.8.2? There was no problem before the upgrade to the Mountain Lion.

By clicking on the RSS icon I'm getting a message:
"No RSS reader is installed. Safari can't open the feed because Safari can't display RSS feeds"
In Chrome I get xml file of the RSS site.
Should I buy something what I didn't need with the Snow Leopard?
Thanks for your help.
Message was edited by: PZA22

Date Modified problem not fixed . . . maybe never?

Dunno if this has come up recently--I couldn't find it in a search. But the problem of a file, being modified and updated, not showing up as such in a folder unless clicked, is a massive one, and obviously has not been fixed with 4.5. I can modify a file, say an FCP movie, then save it, but it will still be down on the list date-wise that it was before I modified it. Only if I highlight it with a mouse click does it go to the top of the "Date Modified" column.
This is inexcusable. OS 9 was instantaneous. What is it about OS X that Apple can't get right in this incredibly basic Finder function?

Hello Ben
If you want to use BT and make connection between the notebook and your mobile phone you must not be any expert. I have done it several times and it works perfectly.
I can really not understand that your dealer was not able to help you. If you want to use the mobile phone as modem you can configure it on follow way:
1. activate Bluetooth using FN+F8 key combination
2. install all new hardware components if necessary (few of them)
3. start Bluetooth stack (BT Manager) using small icon near the time information using right mouse button > Bluetooth Settings
4. activate the Bluetooth on the mobile phone (discoverable)
5. choose Express mode > Next
6. Choose visible device listed in Bluetooth device list > Next
7. Choose pass key for identification (1234)
8. Enter the key into mobile phone. Paring will be success
9. Go to Next and configure the internet connection (provider number) > Finish
10. The new connection will be created in Bluetooth stack utility
11. You can start the dialing up with double click or click with right mouse button and choose Connect
In my case I use Motorola mobile phone and I am also able to send the pictures to the notebook.
Please make it again. It must works!
Good luck!

Satellite Pro L20 keyboard problems not fixed by BIOS update

Hello,
When I type in MS Word or another application, some characters are not displayed. This problem is known.
I have followed the TOSHIBA's recommendation to update BIOS V1.30 for PSL25E. Unfortunatey, this doesn't help.
I would be gateful for any advise.
Thank you,
olbur

Hi guys
In my opinion if the BIOS update procedure doesnt solve the keyboard issue so you should contact the Toshiba service for replacing this part.
But did you use the right BIOS version?
You should check you notebook serial number
The issue was fixed with
- Bios V1.20 or higher for PSL20*-*, PSL25*-* and PSL27*-*
- Bios V1.70 or higher for PSL2X*-*, PSLY*-* and PSL2Z*-*
If it doesnt work the last way is the service point.

My bookshelf and Facebook icons are stuck in "waiting" apparently updating for more than a week, but I don't remember trying to update them. I tried pressing the home and sleep buttons in as suggested, but problem not fixed

My bookshelf and Facebook icons are stuck in "waiting" apparently updating for more than a week, but I don't remember trying to update them. I tried pressing the home and sleep buttons in as suggested, but problem not fixed

Keep to one discussion only. Go back to this one,
https://discussions.apple.com/message/21087117#21087117

RSS Viewer not working with the BBC Weather Service

Hi all
I am unable to display an anonymous RSS feed on my publishing site. I have checked similar posts but mine seems subtly different
in ULS
Cannot find site lookup info for request Uri http://open.live.bbc.co.uk/weather/feeds/en/??????/3dayforecast.rss.
My farm is patched to SharePoint 2013, August CU. I am building demo intranet for a client to help them with their requirements.
I have not touched the master page ( hoping to do that shortly in the branding phase) or embeded any JS.....yet
- BBC weather RSS feed ( have tried this also on the server to check for firewall issue)
- no Ajax options set
- Have disabled Data View Caching .. though not sure this makes any difference.
My next thought was to start looking to see if Web Proxy is causing my an issue. I have found this albeit for another version of SharePoint
<system.net>
<defaultProxy>
<proxy proxyaddress="http://Proxy_Server:port" bypassonlocal = "true"/>
</defaultProxy>
</system.net>
Now I have put in my actual proxy ip and port and I am getting close. Do I honestly need to hard code a credential here ( as I had to with AutoSPSourceBuilder)

Kumar
Have you looked at the ULS logs to see if there are any clues.
As regards my issue, it has been 'fixed' but I think it is a tactical solution rather than one we will deploy in production
Ok, I noticed when I demoed the intranet to the client last Thursday that one of my feeds was working. I now understand that this dev server is no longer using the web proxy. In which case we have two scenarios
OOTB default Proxy

<defaultProxy
This the "tactical" config I have now and all feeds work.
Proxy settings with bypass list
<defaultProxy useDefaultCredentials="true">
<proxy proxyaddress="http://Proxy_Server:Port" usesystemdefault="True"/>
<bypasslist>
<add address="http://open.live.bbc.co.uk" />
<add address="http://MyIndustryFeed/rss" />
</bypasslist>
</defaultProxy>
This is the config I had for my demo. The second feed didn't work till I added the address to the bypasslist.
If we were to reconnect the web proxy and use the above, I understand you need to ensure the proxy access on the server gets authenticated via the app pool account for the relevant web app - hard code credential or "always allow this
user ". If you go down this route I will be interested in how you get on..
As a consultant all I can do is raise support issues with the client - I am now allowed domain admin or web proxy access to verify ;-(

Problem not fixed

I was very disappointed to discover when upgrading to Leopard that a very annoying problem with Safari has not been fixed. The problem is this: whenever I try to drop a bookmark into a folder the folder opens up automatically and has to be closed using the little triangle before any more actions can be continued. It gets worse: when the bookmark is dropped into the folder the show all bookmarks page pops up to the top of the page way beyond the folder I was putting the bookmark into so that I have to scroll down to find the open folder and close it. If I'm not careful when dragging a bookmark to the desired folder other folders open too and they have to be closed every one.
I can't believe that Apple would allow such a glaring problem to continue but it's true. I would like to be able to just drop a bookmark into a folder and have it automatically be on the bottom of the list than have the folder just spring open like that. If it is going to spring open, then I should be able to set a grace period where you have to hold down the mouse button for a half a second to get it to open like on other spring loaded folders. Then the glitch that causes the bookmarks page to page up to the top is, well, just icing on the cake. Can't they fix that?
Sorry for the rant. My question is, is there any 3rd party software that will help with this problem? Is there any way I can fix it, or will I just have to abandon Safari?
thanx,
Ken

If I drop a bookmark into a folder, the page will automatically shift to the top to reveal that Bookmark at the bottom of that particular folder's list. Unless you are seeing something different, I believe that's how the software behavior was designed.
This is not what happens to me. When I drop something in a folder the view instantly pops to the top of the Bookmarks page and I have to scroll down to get to the open folder and close it. Would it did behave as you describe, that wouldn't be so bad. They can't possibly have designed it to be that way. It's a bug. I have reported it. Ideally the folder wouldn't open at all--if you wanted the folder open you could hold down the mouse button just like on other folders and you could turn spring loading off if you wanted to.
Reminds me that I have to make the bug report again because I didn't describe exactly how to reproduce the bug. Here's how:
:::Click drag an item to a folder in the bookmarks window. The folder springs open, you drop the item in without going down the list in the folder. The view immediately pops to the top of the bookmarks page, far above where your open target folder is.:::
I can't say my problem is solved but your answers have been helpful. Thanx.

RGB printing bug still not fixed with 6.0.4

I guess I should not be surprised.
After three major releases of OSX and 20 updates and two major version and 8 updates of Indesign the monitor profile is still being introduced into the RGB printflow.
What the HELL does it take to get this bug fixed?
And, yes I know you can use "Print as Bitmap" or "Fast Graphic Process" in the Canon drivers to work around this problem.
Just maybe if IDCS5 uses the Cocoa print path that PS and LR now use it will be fixed then.

Anyone know if CS5 has fixed/addressed this problem?

ITunes player does not play songs since upgrading to 10.5.1; not fixed with 10.5.2 upgrade. What now?

After upgrading iTunes on my laptop to version 10.5.1, my player will NOT play any songs. My Library seems intact and no songs appear to be missing, but no song will play --not a song downloaded from iTunes Store, nor a song downloaded from a CD. I was hoping version 10.5.2 would fix this, but apparently not. Still not working. Songs do play on my iPod and on my iPhone and I can transfer songs from my laptop to my devices; I can also download Apps to my laptop through the iTunes Store, etc.--all other functions of iTunes seem to be okay, only the player is not working. (My laptop is an hp Probook with Intel i5 chip, Windows 7 Pro OS.)

Does it look like the song is playing at the top of iTunes? Can you see the timer moving?
Also, make sure the volume slider isn't all the way to the left (mute).
This Apple document may help too -> iTunes and QuickTime for Windows: Audio does not play or plays incorrectly

Were any reboot after sleep problems NOT fixed by the EFI firmware update?

The subject says it all. I wanted to get a read on whether this EFI update really did solve the reboot after sleep problem for all 2008 Mac Pros. If have an early '08 Pro that had the problem before the update and it didn't go away after the update (and it's not due to some other problem like kernel panics, etc.), then please post details in this thread. thanks!

We have 4 total systems (all had the issue, all slightly different configurations) and the reboot-on-wake issue has disappeared on all 4 of them.
Looks like a definitive fix to me.

Keyboard issue still not fixed with Bootcamp 3.1

It appears that bootcamp 3.1 did nothing to solve the most annoying issue I face. Everytime I unplug my Mac keyboard from my MacBook Pro, and then plug it back in, bootcamp reverts the keyboard back to mapping the function keys using the apple standard regardless of the setting in the bootcamp control panel.
So everytime I unplug/plug-in the keyboard (which is a lot during the day given my job) I have to open the control panel, uncheck the "Use function keys as standard function keys" checkbox, click apply, then check the same checkbox again to re-enable it and click OK.
I've actually become quite used to doing this, but it's still annoying nonetheless.
I'm wondering if there is no way to fix this. Maybe it's a USB thing. Maybe it's a firmware thing in the apple keyboard. Who knows.
Apple, I have posted several times and have never had a response. It would be nice to hear something from someone on the issue.
Thanks.

Dear Deputy Dwane T.,
Hopefully this will help solve the constant setup problem. I found a solution for what may be a similar problem, but it was with the keyboard in OS X rather than in Windows. The problem I had was that I would start up in OS X and then connect the keyboard. I then would get a keyboard setup "wizard", and this problem would happen each time I connected the keyboard. I found that if I would start the computer up with the keyboard first connected before startup, then go through the keyboard setup, and then restart with the keyboard still connected, after that I never would get the setup stuff again. Now I could connect the keyboard at any time before or after startup, and the keyboard would be recognized properly. As for the mis-assignment of the key positions, is there no way to reassign these in the keyboard control panel item in Windows? I see that under the Control Panel "Region and Language" item, if one chooses the tab entitled "Keyboards and Languages" and then the "Change Keyboards" button, followed by the "Add" button, there is an option for "United States-International (Apple)". Does that keyboard layout solve the problem?
Sincerely,
Wilson

Ora-01000 problem not resolve with other posts

I've the ora-01000 problem which has been argued in other posts but it persist on me.
I'm using JDK 1.3 and Oracle 8i with classes12_01.zip file.
I've been looking at v$open_cursor to see how many cursors where open and even if I put
rs.close(); rs=null;
stmt.close(); stmt=null;
it still doesn't work.
Any ideas?
Thanks.

Sorry. It do work. It was my fault.
null

Pre-xorg7 font problems not fixed after update

Hello all,
After several trouble free years my fonts have gone down the shitter. No idea how or when this issue started, I think it must have been after a recent freetype upgrade.
Here are two screenies which show the problem:
· before
· after
Notice how font spacing is screwed in term and gvim and how window title has gone to shit.
Here is my fonts/local.conf
and xorg.conf
Ideas and suggestions, please?

OK - I found this part about bitmap fonts on the wiki:
Something or someone disabled all my non-scalable (bitmap) fonts, I want them back
By default, fontconfig 2.3.2-4 and higher will disable the use of bitmap fonts. This setting is managed in /etc/fonts/conf.d/10-no-bitmaps.conf, or in higher versions, /etc/fonts/conf.d/10-bitmaps.conf. To enable bitmap fonts and keep them enabled after upgrades of fontconfig, place a symlink from yes-bitmaps.conf to 10-bitmaps.conf, overwriting the symlink to no-bitmaps.conf.
That's a recent change my update was on 19th Feb - that has fixed vim/gvim and terms, window title prob persists

Screen junk issue not fixed with 10.5.2

I'm still getting intermittent screen junk on my 30" monitor on my Mac Pro and also on my MacBook Pro. I was kind of hoping 10.5.2 would have fixed that. Nope.
And Apple's web team needs to get on the ball and add a 10.5.2 option for the OS drop down menu option in the entry screen where I'm entering this.

After reading about the problem in the April issue of MacWorld, page 96 I think, I brought the computer over to the Apple store, showed them the article, and they ordered me a new graphics card (well, it was a little more difficult and time-consuming than that, but you get my drift) - a more recent version of the card.
Et voila!!! No more screen junk. Isn't that kewl?

Intel 2200BG NOT Fixed with Drivers!!!

I installed the Intel Pro/Wireless 2200BG mini PCI WLAN card into my Windows XP Pro SP2 Toshiba laptop (Toshiba Satellite 5205-S505). It will not access my Linksys BEFW11S4 v.2 Router!
Specifically, it will not connect to this router with (128-bit) WEP turned on. It WILL if I turn WEP off. My Sony Viao has no issues connecting.
I have installed the new 9.0.4.27 [1-19-07].
PLEASE HELP!!!!Message Edited by Byrdman on 03-21-200709:30 PM

Try rolling back the wireless drivers in the Windows Device Manager to the previous version. My wife's laptop (Dell Inspiron 600m) has the Intel 2200BG wireless and she was also having trouble connecting to one Linksys wireless router, although the laptop would connect fine at her other offices (all with same wireless security settings -- not necessarily same hardware tho) and our Linksys router at home.
She told me after rolling the drivers back a version she was then able to connect to this particular network that was giving her grief.

RSS Problems not fixed with 10.5.2

Similar Messages

Maybe you are looking for