RSS update time.

IS there a way to get the RSS to update sooner then the 30 minutes? I would either like it to check every 5 minutes or 10 minutes instead of 30 minutes. Does anyone know of a way?

Hi Chloran
when you change the setting via Safari-Preferences-Rss, it stores it in a file named com.apple.Syndication.plist
There are instructions for changing the setting outside the range available in Safari at developer.apple.com and Mac OSX Hints

Similar Messages

Safari RSS update prompt since last update?

Since the last update about 2 weeks ago, when I'm on Safari a Safari window pops up every 5 - 10 minutes asking for my name and password regarding "new RSS email update". I have never seen this before, don't know what it is, see no RSS update option on my gmail page, can't figure out why this window asks for my password and also says it will send me a password, and until I know more I've just been canceling it. Why is this happening and how do I get it to stop? I've looked at the google mail blogs and at least 12 other gmail/Safari users have had the same problem but no one seems to know what to do. I've also posted a question to google support but haven't received an answer. However, as the window that pops up has a Safari symbol, I assume it has something to do with Safari.
Also, since the update, it is taking significantly longer for pages to load and often times out, at which point I check diagnostics and see that I have a connection but then I can't close diagnostics, have to force quit, and restart. This is happening very frequently. I do 3-6 hours of research a day and frequently clear my browsing history (sometimes as often as every 15 minutes). I've spoken to the provider (Comcast) and all seems fine on that front. I am at a loss and incredibly frustrated. Help. Please. Thank you!! (I searched support topics and discussions for nearly 30 minutes and found no relevant topics - however, I can't possibly be the only one having this problem.)

I have been having the RSS feed problem too since the safari update, I didn't even know which name and password it was asking for, my gmail or Apple.. After trying several alternatives it went away and hasn't come back since. However, now gmail is not working very well at all, (since the safari update). Sometimes it will let me log into gmail and show me my inbox, sometimes it will even let me read one or 2 e-mails before hanging up, but it will not let me send any e-mails, yielding a box saying something like 'oops gmail have encountered a problem......blaa blaa #104' sometimes the number is different. I can only get into my inbox if i have just reset safari prior to loading the gmail log in page. It's very convoluted. I can't believe that there is no solution to this either. I thought there would have been many people with the same problem and fix procured instantly. Do we have to wait for another safari update to solve the problem?
P.S Ditto, Diaboy

How can i transfer data from old MacBook Pro, which is too old to update time machine, to the newest MacBook Pro?

I recently bought a new MacBook Pro, and wanted to transfer all the data from my old MacBook Pro, but I get the message saying I need to update time machine on my old one in order to use time machine. However, my old one is too old to update. So I decided to use the cable to transfer, because I heard I can do it that way even though it could take time. But I have no idea what to do...
Can someone help me?

A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC System Preference add-ons
All Unsanity Haxies Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5 Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
OS X Lion: How to use Migration Assistant to transfer files from another Mac
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
Repair the hard drive and permissions using Disk Utility.
Backup your data. This is vitally important in case you make a mistake or there's some other problem.
Connect a Firewire cable between your old Mac and your new Intel Mac.
Startup your old Mac in Transferring files between two computers using FireWire.
Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011

DBI- Update TIme Dimention is completed in Error.

Hi Expert
Please help me to resolve the issue the error we are getting ierror while run the request running in DBI-
Report Name Update Time Dimention
From Date 01-Jan-12
To Date 31-Dec-15
SURAJ
THE idea is we are tring to upload the time dimention in Oracle.
1)
Going to check missing dates in the Time dimension from 19-AUG-2011 00:00:00 to 05-FEB-2013 00:00:00 ...
There are missing dates in the Time dimension.
To fix the issue, please load the Time dimension from 01-JAN-2013 00:00:00 to 05-FEB-2013 00:00:00
The following order lines have dates outside the time dimension range. Review if they are incorrect timestamps or missing in time dimension.
Please reload the Order Management base summary after fixing the missing dates.
Order Number - Line Number - Line ID - Booked Date - Fulfilled Date - Shipped Date - Schedule Ship Date
5163201 - 1.1 - 1309578 - 08/23/2012 - - - 01/03/2013
5162913 - 1.1 - 1307386 - 08/21/2012 - - - 01/08/2013
5162910 - 1.1 - 1307383 - 08/21/2012 - - - 02/05/2013
5162885 - 1.1 - 1307197 - 08/21/2012 - - - 01/15/2013
5162808 - 4.1 - 1306480 - 08/20/2012 - - - 02/05/2013
5162808 - 3.1 - 1306479 - 08/20/2012 - - - 02/05/2013
5162808 - 2.1 - 1306478 - 08/20/2012 - - - 02/05/2013
5162808 - 1.1 - 1306477 - 08/20/2012 - - - 02/05/2013
5162669 - 1.1 - 1305118 - 08/17/2012 - - - 02/05/2013
5162645 - 1.1 - 1304925 - 08/17/2012 - - - 02/05/2013
2)
Financial Intelligence: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
FII_TIME_C module: Update Time Dimension
Current system time is 27-AUG-2012 09:57:51
**Starts**27-AUG-2012 09:57:52
**Ends**27-AUG-2012 10:00:13
Start of log messages from FND_FILE
DB Version: 10.2.0.4.0
Atomic refresh: false
FII_TIME_CAL_DAY_MV was altered to parallel
FII_TIME_CAL_DAY_MV was refreshed using INITIAL refresh method
FII_TIME_CAL_DAY_MV was altered to nonparallel
FND_GLOBAL.CONC_PRIORITY_REQUEST: 9888
Request Set: , FORCE_FULL option:
No action for MV Log recreation.
calling "Import BIS Time Dimension into BSC program"
source language=US
Installed languages
US
DBI Implemented
fii_time_day has data. DBI Implemented
select 1 from bsc_db_calendar,bsc_sys_calendars_b where edw_calendar_type_id=1 and edw_calendar_id =1001
and bsc_db_calendar.calendar_id=bsc_sys_calendars_b.calendar_id and rownum=1
select 1 from mlog$_fii_time_day where rownum=1
select 1 from mlog$_fii_time_day where dmltype$$ <>'I' and rownum=1
Only insert rows. Inc change
In load_dbi_cal_into_bsc_inc 08/27/2012 10:00:11
cursor c1 is select max(ent_year_id), min(ent_year_id), to_number(to_char(sysdate,'YYYY')) from fii_time_day; 08/27/2012 10:00:11
l_max_year=2015 08/27/2012 10:00:11
l_min_year=2004 08/27/2012 10:00:11
l_current_year=2012 08/27/2012 10:00:11
Finaly g_bsc_greg_fiscal_year=2012
select bsc_sys_periodicities.periodicity_id,bsc_sys_periodicities.period_type_id from bsc_sys_periodicities ,bsc_sys_calendars_b where bsc_sys_periodicities.calendar_id=bsc_sys_calendars_b.calendar_id and bsc_sys_calendars_b.edw_calendar_type_id=1 an
d bsc_sys_calendars_b.edw_calendar_id=1001/1002/1003
Ent periodicities
g_ent_cal_id=24
g_ent_fiscal_change=0
g_ent_day_per_id=242
g_ent_week_per_id=243
g_ent_period_per_id=244
g_ent_qtr_per_id=245
g_ent_year_per_id=246
445 periodicities
g_445_cal_id=25
g_445_fiscal_change=0
g_445_cal_short_name=BSC_PER_2455850894563151
g_445_day_per_id=247
g_445_day__short_name=BSC_PER_2455850894563151
g_445_week_per_id=248
g_445_week_short_name=BSC_PER_2455850894563163
g_445_p445_per_id=249
g_445_p445_short_name=BSC_PER_2455850894563171
g_445_year_per_id=250
g_445_year_short_name=BSC_PER_2455850894563176
Greg periodicities
g_greg_cal_id=26
g_greg_fiscal_change=0
g_greg_cal_short_name=BSC_PER_2455850894563184
g_greg_day_per_id=251
g_greg_day_short_name=BSC_PER_2455850894563185
g_greg_period_per_id=252
g_greg_period_short_name=BSC_PER_2455850894563190
g_greg_qtr_per_id=253
g_greg_qtr_short_name=BSC_PER_2455850894563196
g_greg_year_per_id=254
g_greg_year_short=BSC_PER_2455850894563201
select report_date,to_char(report_date,'DD'),to_char(report_date,'MM'),to_char(report_date,'YYYY'),
ent_period_id,week_id from mlog$_fii_time_day
where not exists (select 1 from bsc_sys_periods where
periodicity_id=:1 and time_fk=to_char(report
_date,'MM/DD/YYYY'))
order by report_date 242
g_num_dbi_cal_record=1095
select to_date(start_month||'/'||start_day||'/'||current_year,'MM/DD/YYYY') from bsc_sys_calendars_b where edw_calendar_type_id=1 and edw_calendar_id=1001
g_ent_start_date=01-JAN-11
select to_date(start_month||'/'||start_day||'/'||current_year,'MM/DD/YYYY') from bsc_sys_calendars_b where edw_calendar_type_id=1 and edw_calendar_id=1002
g_445_start_date=03-JAN-11
select to_date(start_month||'/'||start_day||'/'||current_year,'MM/DD/YYYY') from bsc_sys_calendars_b where edw_calendar_type_id=1 and edw_calendar_id=1003
g_greg_start_date=01-JAN-11
select ent_period_id,ent_year_id,sequence,name,start_date, end_date from FII_TIME_ENT_PERIOD
where ent_period_id not in (select to_number(time_fk) from bsc_sys_periods where periodicity_id=:1)
order by ent_period_id 244
g_num_dbi_ent_period=36
select ent_qtr_id,ent_year_id,sequence,name, start_date, end_date from FII_TIME_ENT_QTR
where ent_qtr_id not in (select to_number(time_fk) from bsc_sys_periods where periodicity_id=:1)
order by ent_qtr_id 245
g_num_dbi_ent_qtr=12
select ent_year_id,sequence,name, start_date, end_date from FII_TIME_ENT_YEAR
where ent_year_id not in (select to_number(time_fk) from bsc_sys_periods where periodicity_id=:1)
order by ent_year_id 246
g_num_dbi_ent_year=3
select week_id,substr(week_id,1,4),substr(week_id,1,4),sequence,name, start_date, end_date from FII_TIME_WEEK
where week_id not in (select to_number(time_fk) from bsc_sys_periods where periodicity_id=:1)
order by week_id 248
g_num_dbi_445_week=156
select period445_id,year445_id,sequence,name, start_date, end_date from fii_time_p445
where period445_id not in (select to_number(time_fk) from bsc_sys_periods where periodicity_id=:1)
order by period445_id 249
g_num_dbi_445_p445=35
select year445_id col1,year445_id col2,name, start_date, end_date from fii_time_year445
where year445_id not in (select to_number(time_fk) from bsc_sys_periods where periodicity_id=:1)
order by year445_id 250
g_num_dbi_445_year=2
In correct_ent_week 08/27/2012 10:00:12
select to_date(calendar_year,calendar_month,calendar_day,week52,year from bsc_db_calendar where calendar_id=p_calendar
order by calendar_year desc,calendar_month desc,calendar_day desc using 24
l_max_date=31-DEC-12, l_prev_week=54, l_prev_year=2012
select week_id from fii_time_week where week_id in (select week_id from fii_time_day where report_date=:1)
l_prev_fii_week=20130101
Going to correct data.
l_prev_week=54
l_prev_year=2012
l_prev_fii_week=20130101
l_index=1
Output from g_dbi_445_week
20130102 2 2 2013
20130103 3 3 2013
20130104 4 4 2013
20130205 5 5 2013
20130206 6 6 2013
20130207 7 7 2013
20130208 8 8 2013
20130309 9 9 2013
20130310 10 10 2013
20130311 11 11 2013
20130312 12 12 2013
20130313 13 13 2013
20130414 14 14 2013
20130415 15 15 2013
20130416 16 16 2013
20130417 17 17 2013
20130518 18 18 2013
20130519 19 19 2013
20130520 20 20 2013
20130521 21 21 2013
20130622 22 22 2013
20130623 23 23 2013
20130624 24 24 2013
20130625 25 25 2013
20130626 26 26 2013
20130727 27 27 2013
20130728 28 28 2013
20130729 29 29 2013
20130730 30 30 2013
20130831 31 31 2013
20130832 32 32 2013
20130833 33 33 2013
20130834 34 34 2013
20130935 35 35 2013
20130936 36 36 2013
20130937 37 37 2013
20130938 38 38 2013
20130939 39 39 2013
20131040 40 40 2013
20131041 41 41 2013
20131042 42 42 2013
20131043 43 43 2013
20131144 44 44 2013
20131145 45 45 2013
20131146 46 46 2013
20131147 47 47 2013
20131248 48 48 2013
20131249 49 49 2013
20131250 50 50 2013
20131251 51 51 2013
20131252 52 52 2013
20140101 1 1 2014
20140102 2 2 2014
20140103 3 3 2014
20140104 4 4 2014
20140205 5 5 2014
20140206 6 6 2014
20140207 7 7 2014
20140208 8 8 2014
20140309 9 9 2014
20140310 10 10 2014
20140311 11 11 2014
20140312 12 12 2014
20140313 13 13 2014
20140414 14 14 2014
20140415 15 15 2014
20140416 16 16 2014
20140417 17 17 2014
20140518 18 18 2014
20140519 19 19 2014
20140520 20 20 2014
20140521 21 21 2014
Error in load_dbi_445_cal_data ORA-00001: unique constraint (BSC.BSC_SYS_PERIODS_U1) violated 08/27/2012 10:00:13
Error in load_dbi_cal_into_bsc_inc ORA-00001: unique constraint (BSC.BSC_SYS_PERIODS_U1) violated 08/27/2012 10:00:13
Error in load_dbi_cal_into_bsc ORA-00001: unique constraint (BSC.BSC_SYS_PERIODS_U1) violated 08/27/2012 10:00:13
Exception happens in BSC_DBI_CALENDAR.load_dbi_cal_into_bsc ORA-00001: unique constraint (BSC.BSC_SYS_PERIODS_U1) violated
End of log messages from FND_FILE
Executing request completion options...
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
Concurrent request completed
Current system time is 27-AUG-2012 10:00:14
---------------------------------------------------------------------------

Please see if (Ora-00001: Unique Constraint (Bsc.Bsc_sys_periods_u1) Violated [ID 554200.1]) helps.
Thanks,
Hussein

How to get the latest update time of a info provider in ABAP

hi experts,
i am doing a ABAP program and need to get the latest update time of a info provider , does anyone know where it stores in BW or any other way to get it?
many thanks
WHY

Table : RSREQDONE
you can give INFOPAK_ID as parameter and search for latest/last Request ID and dispaly time and Date.
Cheers
Praveen

No update time stamp in the saved data file

In NI Example Finder, there is a file called "Fieldpoint Datalogger.vi". I flip the "Time Format" switch to "HH:MMS" and the "File Type" switch to "Spreadsheet". The data saved into a file have time stamp at each line. However, the time stamp in each line of the data file saved as the same time without any update to the most current time. I put sampling frequency for 100 ms and saved as 50K bytes file size, but all the time stamps in the file show one same time (I believe it is the time to start to save into file and keep repeat it). How can I get the update time stamp for every 100ms or 500ms and save that time stamp into the data file from this "Fieldpoint Datalogger.vi"? Should I change anything on the subVI called
"embedded FPLog.vi"?

Hello,
Fieldpoint systems usually base the timestamp on the National Instruments Time Server, which is installed on any computer using the Fieldpoint driver. This means that you can configure the Time Server on a Fieldpoint system to continuously check the system time of any computer on the network that has the Fieldpoint Driver installed by referencing its IP address.
If the timestamp is not updating, then we should first verify that it has been configured properly.
Take a look at the following Knowledge Base and let us know if using the listed steps takes care of this issue.
http://digital.ni.com/public.nsf/websearch/C4E56AD6450FC5FD86256DFF0007FF01?OpenDocument
Best regards,
Justin Tipton
National Instruments

After 10.5.3 update, Time Machine disk getting set to read-only

"The Further Adventures of Time Machine..."
Since applying the 10.5.3 update, Time Machine (or something) seems to be randomly setting my backup disk (external Western Digital "My Book Studio Edition" 500GB) to read-only which, of course, brings Time Machine backups to a halt. I can generally just restart my MacBook Pro and all is well again but then after a few more hourly backups, it will go back to read-only status again. There's a couple of things about this that are odd:
1) Even if I open "Get Info" and try to reset the permissions on the drive, I'm locked out of doing so even though I'm the admin. What's even odder (more odd?), my user and "staff" show read & write but about the user name list, it states "You can only read"!?
2) I have this disk partitioned and even the partitions are read-only. Disk Utility reports the entire disk is locked.
Like I said, this has only start happening since 10.5.3 update.
Regards,
Terry

Here's the latest:
Also, the time machine back up drive had been smooth sailing since I hooked it up. Never had an ounce of problems until 10.5.3.
Format is Mac OS Extended.
Thanks.
CP
Last login: Mon Jun 9 18:36:23 on ttys000
cpstaley:~ cpstaley$ ls -aleO@ /Volumes/iMac\ Back-Up
total 9008
drwxrwxr-t@ 35 root admin - 1258 Jan 3 20:22 .
com.apple.FinderInfo 32
drwxrwxrwt@ 7 root admin hidden 238 Jun 5 21:04 ..
com.apple.FinderInfo 32
-r-------- 1 root wheel - 16 Dec 31 20:43 .0011243977f4
-rw-rw-r--@ 1 cpstaley admin hidden 12292 Feb 18 21:26 .DS_Store
com.apple.FinderInfo 32
-rw-rw-rw- 1 cpstaley cpstaley - 862 Dec 31 16:12 .MaxSyncConfig
drw------- 3 root admin hidden 102 Dec 31 20:43 .Spotlight-V100
drwxrwxrwt@ 3 cpstaley admin hidden 102 Jan 3 20:22 .TemporaryItems
com.apple.FinderInfo 32
d-wx-wx-wt 2 root admin hidden 68 Jun 5 16:46 .Trashes
-rw-r--r--@ 1 cpstaley admin hidden 135038 Jan 1 20:15 .VolumeIcon.icns
com.apple.FinderInfo 32
-rw-r--r-- 1 cpstaley admin - 59078 Aug 31 2007 .VolumeIcon.icns.candybarbackup
-rw-r--r-- 1 root admin - 0 Dec 31 19:52 .com.apple.timemachine.supported
drwx------ 96 root admin - 3264 Jun 5 03:30 .fseventsd
drwxrwxr-x@ 122 root admin - 4148 Dec 31 15:49 Applications
com.apple.FinderInfo 32
drwxr-xr-x+ 3 root admin - 102 Dec 31 20:44 Backups.backupdb
0: group:everyone deny addfile,delete,add_subdirectory,deletechild,writeattr,writeextattr,chown
-rw-r--r--@ 1 root cpstaley hidden 6656 Dec 31 19:50 Desktop DB
com.apple.FinderInfo 32
-rw-r--r--@ 1 root cpstaley hidden 11522 Dec 31 19:30 Desktop DF
com.apple.FinderInfo 32
drwxrwxr-t@ 48 root admin - 1632 Dec 31 15:49 Library
com.apple.FinderInfo 32
drwxr-xr-x 2 root wheel - 68 Dec 31 15:52 Network
drwxr-xr-x 4 root wheel - 136 Nov 26 2007 System
lrwxr-xr-x 1 root admin - 60 Dec 31 19:19 User Guides And Information -> /Library/Documentation/User Guides and Information.localized
drwxrwxr-t 7 root admin - 238 Dec 31 19:34 Users
drwxrwxrwt@ 3 root admin hidden 102 Dec 31 16:33 Volumes
com.apple.FinderInfo 32
drwxr-xr-x@ 4 root admin hidden 136 Aug 30 2007 automount
com.apple.FinderInfo 32
drwxr-xr-x@ 40 root wheel hidden 1360 Nov 26 2007 bin
com.apple.FinderInfo 32
drwxrwxr-t@ 2 root admin hidden 68 Mar 22 2005 cores
com.apple.FinderInfo 32
dr-xr-xr-x 2 root wheel - 68 Dec 31 15:51 dev
lrwxr-xr-x@ 1 root admin hidden 11 Dec 31 19:19 etc -> private/etc
com.apple.FinderInfo 32
-rw-r--r--@ 1 root wheel hidden 4352200 Oct 10 2007 mach_kernel
com.apple.FinderInfo 32
drwxr-xr-x@ 6 root wheel hidden 204 Dec 31 15:51 private
com.apple.FinderInfo 32
drwxr-xr-x@ 63 root wheel hidden 2142 Dec 26 13:32 sbin
com.apple.FinderInfo 32
lrwxr-xr-x@ 1 root admin hidden 11 Dec 31 19:19 tmp -> private/tmp
com.apple.FinderInfo 32
drwxr-xr-x@ 9 root wheel - 306 Sep 10 2007 usr
com.apple.FinderInfo 32
lrwxr-xr-x@ 1 root admin hidden 11 Dec 31 19:19 var -> private/var
com.apple.FinderInfo 32

Recording a last updated time for each record in a table

hi
i have a table with 5 columns. and the table has 100 rows of data.
i need to add a sixth column and this column should contain the last updated time of that particular row.
i am allowed to use triggers.
for example, if the 55th row undergoes a change, the 6th column's value for the 55th row should update itself with that particular time.
can any one of you come up with an optimized solution for this please ???
thanx a million in advance and best regards,
novice DBA
:)

Hi,
Here's an example:
CREATE OR REPLACE TRIGGER table_x_biu
BEFORE INSERT OR UPDATE ON table_x
FOR EACH ROW
BEGIN
:NEW.modified_dt := SYSDATE;
END table_x_biu
SHOW ERRORSwhere table_x is your table name, and modified_dt is the DATE column to be populated.
You won't have to specify modified_dt in any INSERT or UPDATE statements. In fact, if you do, the value you give will be ignored, and the trigger will always substitute SYSDATE.
WARNING: if you do get an error message, the line number reported will usually be relative to the first DECLARE or BEGIN statement in the trigger. For example, if I had mis-spelled SYSDATE in the example above, the error message would say there was a problem in line 2, not line 5.

Update time and date with server time..?

Hi.. All
every login ,flash get server time from php. how can i update time and date in flash..?

I'm going to only show the month example, the rest is fairly straightforward:
<?php $month = date('n'); ?>
var date:Date = new Date();
trace(date);
date.setMonth($month);
trace(date);

RUEI 12.1.0.3.0 - Collectors Status Okay but Last Update time not updated

Hi all,
Under System > Status > Collectors Status
Status shows OK but Last Update Time is not updated. The last update time is frozen.
Anyone has a similar experience? Would someone help, please?
Regards,
Nathan

Hi Nathan,
that seems odd indeed. would not know the cause or any sensibl explaination unless I have system details, Can you pls file an SR for this issue and upload the helpdesk file to the SR?
a helpdesk file is created under system >>maintenance>>helpdesk report
It will create a zip file that we can read in support, see the events the system is capturing, analyze your configuration. That will allow us for very quick follow up. if you want me to track it internally at Oracle pls send me the SR# in a direct mail: [email protected] -- I'm the responsible product manager for RUEI so happy to follow up on this.
R, jurgen

After the 10.5.6 update Time Machine stops working

After the Mac Os X 10.5.6 update Time Machine won't back up my Mac. In an effort fix the problem I deselected my Western Digital External Drive-My Book Essential Edition and then reselect it and I got the following message You do not have appropriate access privileges to save file “.001b63aae271” in folder “Time Machine External”. I also tried to repair permissions in Disk Utility, That didn't work. Then earlier today I found out I'm not the only one with these errors. How do I fix this?

Hello,
here is what I found on http://programminggems.wordpress.com/2008/12/16/mac-10-5-6/
"1. Click on the magnifying glass in the top right (Spotlight) of the menu bar.
2. In the text entry field type “Terminal” (in all these steps, type what is in the quotes, but not the quote characters themselves) and press Return.
3. In the new window that opens, type “cd /Volumes” and press Return [note the space in the command].
4. Type “ls -al” [the "l" is a lowercase "L"], press Return, and note the name of your backup volume.
5. Type “cd ” (no Return yet), type the first few letters of your backup volume name, and press the Tab key, then press Return.
6. Type “ls -alF” and press Return and note the file with a name that matches the error message.
7. Type “sudo rm ” (no Return yet), type the first few letters of the file name that is reported in the error and press Tab to get the full name on the command line, and then press Return. (Alternatively, you can change ownership as described in my comment #3.)
8. When asked for your password, enter it and press Return.
9. Type “ls -alF” and press Return and note that the file is gone.
10. Type “exit” and press Return to close Terminal (then use the menu to Quit).
11. Retry the Time Machine configuration."
It works fine for me, thanks Mr Foster!

Parameter value "Half year " is not accepting by while updating time dimen

Hi,
while i am updating "Time" dimention i am getting an error as parameter value "Halfyear" is not valid value. But system is accepting Daily, Monthly, Quarterly and yearly under Level parameter.
So please advise me how to proceed on this.
Regards,
M.Chandra Sekhar Chowdary

Hi,
This is definitely not the answer you might be expecting. We have it as 'DAY' for the level property values for H1 and H2(completely not reasonable). But you can process the TIME dimension with this 'value' for half year provided you dont have dates as your time members (which may be the case).
Try using 'DAY' and process the dimension as a work around. We could wait if there is any other valid reason behind this (not taking 'halfyear').
Thanks

Last updated time of procedure

Hi
I want to know last updated time of a procedure.
can any body tell me.
thanks

select last_ddl_time from all_objects where object_name = 'procedure_name' and object_type = 'PROCEDURE';

Last Scan Time vs Last Update Time

All,
I have been using SW to track my Server 2003 boxes as MS will be EOL of these next week. In my Inventory report I include Last Scan and Last Update. As we migrate the boxes to Server 2012 - I had expected to see the 2003 Server OS drop off of the list but that is not happening.
I am getting current "Last Update" (7/13/2015) but the report still says the box has OS Server 2003 and I know it is Server 2012.
What am I missing and the bigger question is - This is for servers only. Do I have confidence that my PC inventory is reflecting the correct updates in my larger inventory?
Any advice would be appreciated.
This topic first appeared in the Spiceworks Community

It is my understanding that the 'discovery scan' is just for the initial scan and then there is also an update scan that just checks for differences.
I have my remote collectors to search specific subnets and scan once a week. Ever since the initial scan they all show up during in the inventory. I see most of them being 'updated' in inventory according to the schedule and the timestamp but the "Last Scan Time" never changes. As such my not scanned in 30 days just continues to build up. The "Last Updated Time" gets updated correctly but nothing else.
Is this normal behavior? It doesn't seem like it is considering the Not Scanned in 30 days group exists. It wouldn't make sense for that group to exist if there was no need for a "scan" if "updates" worked just fine.
This topic first appeared in the Spiceworks Community

Update Time where Date already exists

Hi,
When i am trying to update time in the column where date already exists, i tried using the update query, but time is not getting updated.
UPDATE ABC SET ATTRIBUTE=TO_DATE('09/30/2011 12:00:00 AM','MM/DD/YYYY HH:MI:SS')
Attribute = 9/30/2011 (As per current record in DB) and i want to add time also..
So when i try updating the record, i dont get any errors, but the time does not get updated, can any one help me for this issue.???
Datatype of Attribute is Varchar2(150)
Thanks

Is there anyway to update a record throgh TO_CHAR function???
SQL> @test
SQL> create table abc (Attribute Varchar2(150));
Table created.
SQL> insert into abc values('09/30/2011');
1 row created.
SQL> commit;
Commit complete.
SQL> select * from abc;
ATTRIBUTE
09/30/2011
SQL> UPDATE ABC SET ATTRIBUTE=to_char(sysdate,'YYYY_MM_DD HH24:MI:SS');
1 row updated.
SQL> COMMIT;
Commit complete.
SQL> select * from abc;
ATTRIBUTE
2011_03_06 19:59:37
SQL> drop table abc;
Table dropped.
SQL>

RSS update time.

Similar Messages

Maybe you are looking for