RSUOM Unit of Conversion in Bex 3x
Hii,
Can I use RSUOM (Unit of Conversion) in Bex 3x.
Best Regards,
Mehmet
This transaction is available only as of BI 7.0
Similar Messages
-
Unit Conversion in BEx BI7.0
Hello all,
Im working with BI7.0 and I have been reading the posts about the quantity conversion and In order to use the unit conversion in BEX (not in transformation), I can apply the sugestion described in
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b7b2aa90-0201-0010-a480-a755eeb82b6f
But what happens with the post in this forum about using transaction RSUOM ..i mean if i use the link solution isnot necessary to use transaction RSUOM? or with BI7 is the "new" solution to use RSUOM ¿?
Can someone please explain a little bit
Thanks in advance for your help.
MVthanks gdmon for your help..
I have already created the underlying DSO and "connected" to the 0MAT_UNIT InfoObject using a transformation. In the transformation rule I have been conected:
MATNR->0MATERIAL,
MEINH->0UNIT,
UMREZ->0UOMZ1D,
UMREN->0UOMN1D
but I still have 0BASE_UOM not assigned ..my question is if is possible not assign the infoObject 0BASE_UOM (initial) or if I have to assign to a R/3 field..but do you know which field can I assign?
thanks in advance for your response...
MV -
Quantity Conversion in BEX using calculated KF
Hello all
Is it possible to apply a Quantity Conversion in BEX, using Restricted or Calculated Key Figure?
Im trying to apply this solution but the "conversion" tab in the key figure is disabled.
Thanks in advance for your response.Thanks for your response..
Actually Im using BI7 and for some test, I was trying to create some calculated KF using +the same
key figure+ but different fixed target unit.
(I have already made the changes in 0material and activate the standard ODS for that)
regards,
mv -
PO with New unit of conversion
Hi,
We have the situation is PO is not update the new unit of measure conversion. As the PO was created with reference to the contract. The contract donu2019t have the unit of conversion. I know the PO is picking from the contract. Iam not able to change the contract with new unit of conversion. Pl advice how the PO will pick the new unit of conversion.
Regards,
KumarHi
Thanks for the info.. i did the same but it taking unit conversion from the contract not from material master
Kumar -
Hello experts,
i've a Bex query in which i use a calculated keyfigure. The values of this keyfigure are all in different units. I now want to add another column in my query that would display the values of the calculated keyfigure in first column in a single consistent unit .
Please suggest how can this be done ?
Regards,
SanjayHi Sanjay,
Create a formula with NODIM Data Function, which is used to apply formula for different units in key figure
example:
In formula NODIM(sold to party)
Let me know if you have any issues
regards
Satish Arra -
Friends,
I am trying to use RSUOM to convert units of measure on weight. I am having some difficulty in getting it to work and am looking for some advice.
I have 0net_wgt_dl in my cube. It is populated with KG and LB. I would like to use a conversion to change all the values to LB.
What I have done to date is created a conversion in RSUOM. I have set this to use table t006 and set the source unit to 'from data record' and the target unit to a fixed unit of LB.
In BEx I set the Unit Conversion type for 0nET_WGT_DL to my Z_LB_CONV and it pulls in the pounds as the Target Unit, but at run time, the data remains as it was without any of this.
I have tried putting breakpoints in all the UNIT_* FMs looking to see what was getting passed and it appears none of them are getting hit.
Is there something I am missing in this scenario?
Regards,
KBTake a look at these threads & see if they are helpful...
/message/3532362#3532362 [original link is broken]
NODIM
http://help.sap.com/saphelp_bw30b/helpdata/en/03/17f13a2f160f28e10000000a114084/content.htm -
How to convert unit of measures in bex on master data attribute values
Hi All,
i need to convert the unit of measure in Masterdata Attribute values... that means ) ' 0grooss_wt'. this is attribute as a keyfigure of ' 0material' .. this ' 0gross_wt' values has to convert in KGs. at Present ' 0gross_wt' values are in KG and Grams...
I can change these values in update rules by writting Routine.. But I need to convert it in KGS at BEX Query Designer Level..
I need calculate like this
quantity sold * Gross Weight.
here Gross Weight is the formula variable which replacing the values of gross weight...
i tried by creating conversion types in RSUOM t-code. but it works on keyfigures of infocube.. not on attribute values of master data...
is there procedure in formula variable it self to convert unit of measure before replacing the values.....
or is there any other solution to this Problem...
Thanks in advance..
regards
ravi.pHi
Have you tried to create a variable for ths kf with exit. I thnk it is possible here
Assign points if useful
Regards
N Ganesh -
Unit of conversion in BW 3.5
Hi BW Experts,
I impletented Unit of measure conversion in BW3.5 as same as mentioned in the doc "HOW to........Report data in Alternate Units of measure". When I am executing query in BEX Analyzer it gives Alternate uom as in ERR.
Please guide me .......
Full points will be assigned.
Thanks!
SapnaHi
Please check whether your keyfigure is hard coded with any of the unit field...
Teja -
BEx Query Help How to restrict Organisation Unit Like 'D%' in Bex
Hi all ,
In a cube i have a columb ORGUNIT which is having Values from
A_152,
A8373 ,
D_983,
B_0293,
C09 ,
D6653 .
In bex Query Designer I want to restric that infoobject & organisation unit which is starting with 'D' .
means output will be : D_983 ,
D6653
ABAP statement for this ORGUNIT LIKE 'D%' .
how we do same in BI restriction .
Thanks Regards
Sanjeev Kumar
Edited by: skarya2003 on Dec 6, 2009 9:01 AMHi,
Try using customer exit .
chk out this doc which helps u, http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90f8b363-882d-2c10-ea91-9f08ce4c658a&overridelayout=true
Regards,
Priya. -
Currency Conversion in BeX Query
Hello Experts
I want to have corrency convetion option in Bex Query and have few questions regardig that.
i am using key figure 0DEB_CRE_LC which has currency as 0LOC_CURRCY.
1. how do i allow user to enter currecny, using some input variable for currency char.?
2. do i need to associate some date for this conversion?
3. what exchange rate will be used?
Thanks in advance
Regards
SudeepHello Sudeep,
1. how do i allow user to enter currecny, using some input variable for currency char.?
Answer: Create a variable on 0Currency and select the conversion type which you have maintained in RSCUR tcode. Make this variable as input ready. This will give the user the flexibility to enter the Currency.
2. do i need to associate some date for this conversion?
Answer: Yes you need to associate the Currency conversion type to your conversion. Same can be maintained in RSCUR tcode.
3. what exchange rate will be used?
Answer: In RSA1, goto source system tab and right click on the Source system. Select "Transfer exchange rates". This will transfer the exchange rates which are maintained in your ECC side. The exchange rates are maintained in table TCURR. you can check the table in SE16.
Regards,
Satyam -
0material alpha conversion in BEx query
Folks,
I want to ALPHA convert the material number during BEx query execution. Once the query is executed, I should see the ALPHA converted number. Please advise.
Thanks.Hi,
can you please give an example of what you want to achieve? 0MATERIAL has already MATN1 as conversion exit....
Achieving this in BEx during query runtime could be quite tricky...
Alternatives would be
- adding a nav attribute to 0MATERIAL like ZMAT_ALPHA and load it with the ALPHA conv exit
- virtual charateristic
- changing the displayed values in VisualBasic or in the WebTemplate
hope this helps....
Olivier. -
Conversion of Bex reports to vovyger
Hi Friends,
I have some reports in bex analyzer now i want to convert into vovyger reports.
Pls can any one tell ,will it be possible or not.
Pls send the conversion docs if it possible .
Thanks & Regards,
Ramnaresh .P.Hello Ramnaresh,
I doublechecked our documentation but did not find anything.
At the moment there is no conversion tool for BEX reports to BOE reporting solutions but
I do not know future plans.
Best regards
Falk -
Quantity field displayomg units as ERR in Bex
Hi,
We have a quantity field it is showing Units as ERR. Source system for us is DB Connect (Oracle server)and if I right click on this I haven't seen transfer global settings option to do the settings. I have read related posts in SCN but those all are for R/3 source system.If I use NODIM in BEx I cant show the units so hHow do I fix this isuue.
Thanks,
Swathi.Hi Swati,
Units might be maintained in the separate filed.have you mapped the unit filed to the KF?
If the filed is not mapped just map the filed(before making changes drop the data and reload the data).
once done with the changes and realod the data run the report and check.
Regards
KP -
Storage unit Length conversion tcode OMNN
ABAP Guru's
I have a requirement to use different length conversion for SU in different warehoses
HU and SU are both active, Some of the warehouses use SU conversion length as 10 digits and others use 18 digits
as OMNN settings are at client level so we may have to use exit MWMK0001 for our requirement
In OMNN I will use SU conversion exit value as 3 and then through CMOD I will create and activate a project
I will be using first two components of exit MWMK0001 , I am struggling because I can't put break point in this exit .I am new to ABAP so need help Does anyone ever had similar requirement and how it was solved
Thanks
AshHello there,
Please see the following path:
IMG
- Logistics Execution
- Warehouse Management
- Storage Units
- Master Data
- Define Number Ranges
- Conversion exit for storage unit number
You may find the following information.
Conversion of storage unit numbers
SU conversion exit 3 Customer-specific user exit
Length of SU numbers 18
The storage unit number is processed through a conversion exit.
You can find these exits in the domain lenum
CONVERSION_EXIT_LENUM_INPUT
CONVERSION_EXIT_LENUM_OUTPUT
You may also use user exit EXIT_SAPLLVSK_002 to reprogram the length conversion again to plus the leading zeroes for the SU number. In the SAP standard any values for the SU number have to be typed in also leading zeroes.
Regards
Martin -
Batchwise Different unit of conversion
Hi Experts,
I have one scenario,
Material A procure in UoM KG
Receiving the same in different reels where conversion of reels Vs KG is not fixed. So I cannot use alternative UoM as I need to fix conversion between KG and Reel which is not the case here.
Batch Management is active in my client. So i can create multiple lines as per reels received in MIGO screen and assign individual batch to them.
Is it possible to achieve this scenario by any other way?
What is the functionality of Batch specific material unit of measure and how to achieve the same? what could be customization steps in this scenario.
Can I create multiple batches initially for weight slabs and from there track an inventory? How?
Thanks in advance.
Best Regards,
BhagatProblem has been solved..
Maybe you are looking for
-
HP Laserjet 2550L Won't Print In Color
I recently upgraded to Leopard, and now my HP Laserjet 2550L will not print in color. I've tried printing for several different apps, but they always come out in b & w. It does however print in color when printing a test page from the printer itself,
-
Error when Websphere try to load datasource
hi, I'm working with websphere 5. I create a EJB project with oracle 9i database, when i execute the application and for example, from my session bean I try to call a findByPrimaryKey() method over my entity bean the WebSphere container load the data
-
I'm not very tech savy and this Nook is new to me.
-
Passing multiple parameters between two report portlets on the same page
Hi, I want to pass multiple parameters between two report portlets on the same page. I have been succussful passing a single parameter between two portlets. The following are the steps : (1) Created first report based on the query SELECT htf.anchor('
-
The comics from Washington Post cannot be read on the iPad three nor on the iPhone to keep refreshing are not readable spoke to Apple Apple says it is do not Apple issue but I purchased my iPad to use for this as well I spoke to the iPad editor Wa