Rsvp, what is the problem? please

three router 1--2--3, all interfaces enable rsvp by using command "ip rsvp bandwidth ".  loopback 0 of r1 has ip address 1.1.1.1 and loopback 0 of r3 has ip address 3.3.3.3.  using command "ip rsvp sender-host 1.1.1.1 3.3.3.3 tcp 1 1 500" on r3  ; using command "ip rsvp reservation-host 1.1.1.1 3.3.3.3  tcp 1 1 ff ra 500 8 " . show  ip rsvp sender and show ip rsvp reservation is ok.  but show ip rsvp installed is as follow.
1#show ip rsvp installed
RSVP: Serial0/0 has no installed reservations
RSVP: Loopback0 has no installed reservations
please, what is the problem ?

please help me ,thanks

Similar Messages

  • I am trying to restore an ipod to the factory settings. However I get a message that my username or password is incorrect. I am using my correct Apple id and password.  What is the problem, please?

    I am trying to restore an ipod to the factory settings. However I get a message that my username or password is incorrect. I am using my correct Apple id and password.  What is the problem, please?

    Was that Apple ID and password the original owner of the iPod?  If not, try using the Apple ID and password of the original owner.

  • I am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

    i am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

    Did you check your security software (firewall)?
    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
    See:
    * [[Server not found]]
    * [[Firewalls]]

  • My Ipad 2 does not turn on when not plugged to electricity. Even when plugged to electricity, it constantly restarts/switches itself off. what is the problem, please help??

    My Ipad 2 does not turn on when not plugged to electricity. Even when plugged to electricity, it constantly restarts/switches itself off. what is the problem, please help??

    i plugged it and pressed the home button for a few seconds. the connect to itunes screen appeared and the moment i disconnect the cable from the electric plug, it switches off. when i connect the cable to the PC, nothing happens, its as if nothing has been done.

  • My MacBook Pro does not save bettery life.i use 4 hrs for the full charge better instead of 7 hrs.what is the problem.Please help.

    My MacBook Pro does not save bettery.I use 100% bettery charge 3-4 hrs instead of 7 hrs.what could be  the problem?

    7 hours mentioned is possible when run under lab conditions.
    Running GPU intensive applications will decrease battery runtime.
    Maximize Runtime / Tips for maximizing your battery charge
    http://support.apple.com/kb/HT1446
    Runawy applications can shorten battery runtime,affect performances and
    increase heat and fan activity.
    http://support.apple.com/kb/TS1473

  • Now i tried to uninstall itunes from the control panel add remove programs an it gave me the same message. What is the problem please help

    the feature you are trying to use is on a network resource that is unavailable. Click ok to try again or enter an alternate path to a folder contaning the installation package itunes.msi in the box below. An in the box below it has this in it.C:\Documents and Settings\User\Local Settings\Application Data\Apple\Apple Software Update

    Hi, Dee5858
    Thank you for visiting Apple Support Communities.
    As you are receiving the network resource is unavailable message, completely uninstall iTunes and all of it's components in the order specified in the article below.  Once this is done, download and install iTunes. 
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    The article below will walk you through the steps to correct the network resource error.  This will need to be done on each application that gives you that error. 
    "The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
    http://support.apple.com/kb/TS3704
    If you experience issues during installation, see the article below.
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Regards,
    Jason H.

  • When I start mozilla firefox web browser, sometimes I see a message saying that "a Mozilla Firefox is already running, please close it or restart your program", while I don't have one running at that time. What is the problem?

    When I start mozilla firefox web browser, sometimes I see a message saying that "a Mozilla Firefox is already running, please close it or restart your system". As a matter of fact, there is no firefox browser running at that time. Since I cannot do anything about it, I have to restart my computer before I can use the web browser, which bothers me dearly. What is the problem?

    Plug-in and tasks started by Firefox may continue after attempting to close Firefox. The "X" in the upper right-hand corner closes the Window (same as Ctrl+Shift+W) but even if it is the last Firefox window, it does not necessarily close Firefox .
    '''The only proper way to exit Firefox is to use Exit through the File menu''', not the "X" in the upper right corner of last Firefox window.
    ''Menus hidden: then use Alt+F then X.''
    '''Firefox hangs''' | Troubleshooting | Firefox Support ''(some extensions cause a problem)''
    * http://support.mozilla.com/kb/Firefox%20hangs#w_hang-at-exit
    Use the '''Windows Task Manger''' to remove all running firefox.exe in the "Processes"
    tab of the Windows Task Manager, then restart Firefox.
    "'''Restartless Restart'''" extension for Firefox 4.0 only (2 KB download )
    * https://addons.mozilla.org/firefox/addon/249342/
    use to close and restart Firefox after enabling or disabling an extension, switching
    to a new theme, or modifying configuration files, then you don't have to worry
    about delay or have to look in the Task Manager to see if Firefox is closed yet.
    Uses keyboard shortcut "'''Ctrl+Alt+R'''" or a file menu option.
    '''Windows 7''' users can use '''Ctrl+Shift+Esc''' to get to the Windows Task Manager quicker than starting with Ctrl+Alt+Del.

  • Please i did pay to renew my ios developer account and you sent me an email to reply within 2 business days, but nothing happend yet. may i know what is the problem?

    please i did pay to renew my ios developer account and you sent me an email to reply within 2 business days, but nothing happend yet. may i know what is the problem?

    This is primarily a user-to-user support forum and not related to developers. The following link has information about checking your program enrollment:  https://developer.apple.com/support/ios/enrollment.html#howcanicheckstatus
    If that doesn't help, there is a "Contact Us" button at the bottom of the page in the above link.

  • I have an iBook g4 14" 1.42 ghz. I recently installed a new hard drive.  I put the install CD in. Then, I pressed the power button, then the "C" key. Black screen and No chiming. Please tell me, what I can do to resolve this? What is the problem with it?

    I have an iBook g4 14" 1.42 ghz. I recently installed a new hard drive.  I put the install CD in. Then, I pressed the power button, then the "C" key. Black screen and No chiming. Please tell me, what I can do to resolve this? What is the problem with it?

    Since it will not boot then a hardware test can't be run. You could try FireWire Target Disk Mode and if it works then access from another Mac to run tests on the new drive. You could also try installing the OS X software from the host computer. If this does not work then professional help should be considered.
    http://support.apple.com/kb/ht1661
    http://osxdaily.com/2010/04/07/how-to-boot-a-mac-in-target-disk-mode/
    http://www.macobserver.com/tmo/answers/how-to-use-target-disk-mode-to-boot-from- another-macs-hard-drive

  • TS1559 I bought my iphone 4s in usa apple store but when i write my serial number to support center i see warning like that. What is the problem ? Our records indicate that this product has been replaced. Please provide the serial number for your replacem

    I bought my iphone 4s in usa apple store
    ihave trouble with my iphone wifi that is gray and cannot connect any wifi network.
    i want to support for this issue.
    but when i write my serial number to support center i see warning like that. What is the problem ?
    Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us.

    Nobody here would know.  Contact Apple and ask them

  • Iam trying to purchase any of my downloaded appli but I couldnt get what i want always shown is "Please contact Tunes support to complete this transaction ,"but  idont  know where to ask to? pls.tell me what is the problem in my acct.

    any kind of transaction ,purchases from any of the game or appli Idownloaded could not make it  always shown on my screen is"Please contact iTunes support to complete this transaction ,could you please tell me what is the problem with my acct.

    These are user-to-user forums, nobody on here will know what the actual problem is with your account.
    You can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store

  • Please tell me what is the problem with this code

    Hai,
    Iam new to Swings. can any one tell what is the problem with this code. I cant see those controls on the frame. please give me the suggestions.
    I got the frame ,but the controls are not.
    this is the code:
    import javax.swing.*;
    import java.awt.*;
    import java.awt.event.*;
    public class ex2 extends JFrame
    JButton b1;
    JLabel l1,l2;
    JPanel p1,p2;
    JTextField tf1;
    JPasswordField tf2;
    public ex2()
    setDefaultCloseOperation(EXIT_ON_CLOSE);
    setTitle("Another example");
    setSize(500,500);
    setVisible(true);
    b1=new JButton(" ok ");
    p1=new JPanel();
    p1.setLayout(new GridLayout(2,2));
    p2=new JPanel();
    p2.setLayout(new BorderLayout());
    l1=new JLabel("Name :");
    l2=new JLabel("Password:");
    tf1=new JTextField(15);
    tf2=new JPasswordField(15);
    Container con=getContentPane();
    con.add(p1);
    con.add(p2);
    public static void createAndShowGUI()
    ex2.setDefaultLookAndFeelDecorated(true);
    public static void main(String ar[])
    createAndShowGUI();
    new ex2();
    }

    import javax.swing.*;
    import java.awt.*;
    import java.awt.event.*;
    public class ex2 extends JFrame
        JButton b1;
        JLabel l1,l2;
        JPanel p1,p2;
        JTextField tf1;
        JPasswordField tf2;
        public ex2()
            setDefaultCloseOperation(EXIT_ON_CLOSE);
            setTitle("Another example");
            b1=new JButton(" ok ");
            p1=new JPanel();
            p1.add(b1);
            p2=new JPanel();
            p2.setLayout(new GridLayout(2,2));
            l1=new JLabel("Name :");
            l2=new JLabel("Password:");
            tf1=new JTextField(15);
            tf2=new JPasswordField(15);
            p2.add(l1);
            p2.add(tf1);
            p2.add(l2);
            p2.add(tf2);
            Container con=getContentPane();
            con.add(p1, BorderLayout.NORTH);
            con.add(p2, BorderLayout.CENTER);
            pack();
            setVisible(true);
        public static void createAndShowGUI()
            ex2.setDefaultLookAndFeelDecorated(true);
        public static void main(String ar[])
            createAndShowGUI();
            new ex2();
    }

  • HT1476 I have a big problem in my phone charger . I have Iphone 5s . I don't know what is the problem but the bettery is not working true . A decrease in the battery very quickly and then turns off the machine . Please, I want to address this problem quic

    I have a big problem in my phone charger . I have Iphone 5s . I don't know what is the problem but the bettery is not working true . A decrease in the battery very quickly and then turns off the machine . Please, I want to address this problem quickly .

    http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/

  • After upgrade to ios5.1, stuffs in my outlook calender can't syn with my iphone.  what can i do to fix the problem please?

    After upgrade to ios5.1, stuffs in my outlook calender can't syn with my iphone.  what can i do to fix the problem please?

    Restore iPhone with iTunes on computer. A Restore is more thorough than the Update. If still problem after the Restore on computer, make Genius reservation or set up service and take or send iPhone to Apple Store for resolution. iPhone 5S is covered by Warranty.

  • Please contact itunes support to complete this transaction what is the problem?????????, please contact itunes support to complete this transaction what is the problem?????????

    please contact itunes support to complete this transaction what is the problem?????????, please contact itunes support to complete this transaction what is the problem?????????

    I have the same problem and I contacted iTunes support but there is no direct contact for iTunes support.  Technical support emailed the iTunes dept and they didn't know what the problem is because there were no outstanding charges or flags on my acct so they said to call my card holder. I called my card holder who said there was no charges from iTunes and no problems with Apple charges so they didn't know what was wrong. I reset my device and the problem is still happening. I'm going to make an appointment at the genius bar to see if they can help me.

Maybe you are looking for

  • Analog to digital conversion

    HELLO AND GOOD MORNING, I HAVE A TEAC 4010 GSL REEL TO REEL TAPE DECK. I WANT TO IMPORT THIS DATA TO MY IPOD CLASSIC. I WOULD APPRECIATE ANY HELP IN THIS AREA. I USE AN ADAPTEC CARD TO CHANGE MY VCR'S TO CD'S AND THAT WORKS VERY WELL. DOES ANY ONE HA

  • Fujitsu fi-6130z scanner doesnt work on Windows server 2012 using Remote Fx USB Redirection

    I'm using Wyse WES7 SP1 client and using RDP, i'm connecting to RD Host Server 2012 standard edition with Remote FX enabled. scanner is able to redirect using Remote Fx and i've installed appropriate scanner driver on server. the scanner is listed in

  • Transaction to modify a table

    Hi, What is the transaction to modify a table  (oracle) ? Thanks in advance

  • ORA-24123: feature IOT support is not yet implemented

    Hi, in 10G R2 when using DBMS_REPAIR I receive : ORA-24123: feature IOT support is not yet implemented ORA-06512: at "SYS.DBMS_REPAIR", line 293 How should I implement SYS.DBMS_REPAIR ? Thank you.

  • Ridiculous usage warning

    Ok, so we have a 40GB usage limit, and we never exceed it, in fact we very rarely go anywhere near it.  Got an e-mail today that we are close to exceeding it for August, check our account and we have used 33.5GB!!  What the hell? This absolutely has