RSWUWFML2 for e-mail?

Dear all.
I'm having a problem unable to send a simple e-mail to LotusNotes environment.
My task is using method SENDTASKDESCRIPTION with type id "G" and the receiver is HR position id (S 99999999).
The SAPconnect has been configure and schedule properly and I'm tested successfully from SBWP to LotusNotes.
IT0105-0001 and e-mail address in user master data has been setup properly as well.
Do I have to schedule RSWUWFML2?
Any body can help my problem?
Thanks in advance

Hi Sridar.
the e-mail address for WF-BATCH maintained already.
Do we have to set Automatic Forwarding to internet e-mail address since we're not using RSWUWFML2?
For your additional information, from there's no error in the workflow log.
When I check in the SOST there's no e-mail transmitted
Message was edited by: Maorriyan Santoso

Similar Messages

Thunderbird fails to send email when "Scan email for junk mail" option is checked in Server Admin

I have 2 clients that need to send mail through my server, one Mac and one Windows. The Mac uses apple mail and the Windows machine uses Thunderbird.
Apple Mail will send fine, it is set up for "Use Default ports 25, 465, 587" and "Use SSL" and "Authentication: MD5 Challenge-response".
Thunderbird refuses to send and I don't even see any errors showing up in the Console on the OS X server under smtpd entries.
If I uncheck the "Scan email for junk mail" option on the server, then Thunderbird will send fine.
Thunderbird is set up as: "smtp port 587 (default)" "connection security: STARTTLS" "Authentication method: Encrypted Password"
May or may not be relevant: I use virtual domains as well as aliases.
Server: Mac OS X Server version 10.5.8

Solved it, looks like maybe the smtpd settings for sasl authentication may not have been correct. I followed everything in http://osx.topicdesk.com/content/view/38/41/ the "Frontline Spam Defense for OS X server" guide and now can send mail just fine from Thunderbird Winodws and from Apple Mail.

Mail constantly checks for new mail; downloads same emails repeatedly HELP!

For the last three days (since 19th), Mail has been downloading the same emails over and over again. I first noticed a problem when about 20 spam emails that usually route to my Junk folder appeared in my Inbox. I thought I had just moved it incorrectly and deleted them, then they appeared again later.
The mail jogger cycle (next to Inbox) keeps turning and turning like it can't stop checking for new mail. How do I get it to stop?? The emails are multiplying like gremlins in my Inbox and driving me nuts!
Also, it only downloads new emails when I first open the app. I have to force-quit out of Mail, then reopen, and I will get a couple of new emails, and then ALL THE EMAILS FOR THE LAST THREE DAYS AGAIN.
Mail was working fine for me until three days ago. The only thing I've changed recently is a Software Update on the 15th for QuickTime and iTunes.
Please help! I tried to Repair Permissions and it didn't do anything. I also tried removing all messages from the server and that did nothing either.
Mail Version 2.1
THANK YOU ANYONE WHO CAN HELP ME!!
iMac G5 Mac OS X (10.4.7) 2.1 GHz, 512 MB Memory

UPDATE: I think I got it to stop checking mail. I have Yahoo mail and I checked my email through online Yahoo. I was able to delete a bunch of emails and it suddenly stopped checking for email in the Mail app.
HOWEVER, it will NOT remove some of my junk emails. I was able to delete over 100+ of them. But one specific message (which I now have 8 copies of) will not go away. It is one of those 'Delivery Status Notification' emails. Is this a virus??
I've tried Erasing Deleted Messages and Erasing Junk Mail. Neither helps. These emails won't go away.
Help please! I would be very grateful.

I use a gmail account for my mail. When I send an email I sometimes get multiple duplicates (up to 10-12) of the same sent message saved in my sent file. help

I use a gmail account for my mail. When I send an email I sometimes get multiple duplicates (up to 10-12) of the same sent message saved in my sent file. help

Did you check your user name and password in Settings>Mail,Contacts,Calendars...tap your email account, tap SMTP, then tap the primary server name. Make sure the settings there are correct.

When opening my Outlook 2010 with new added e-mail account with Exchange Server, I have to click manually on my standard e-mail account for checking mail

When opening my Outlook 2010 with new added e-mail account with Exchange Server supplied by my employer, I have to click manually on my standard e-mail account for checking mail. Do I have to upgrade my Microsoft Office 2010 or how can I make my Outlook
2010 check all my four e-mail accounts without manually click on my accounts?
Sincerely
Ketil Hothorp

Hello Ketil,
Good Day...
Seems to be the Issue is Syncing emails, now I would recommend you to Remove and Add the Account and try and check if the emails are getting synced automatically.
Hope this is with Single User. If it is with Multiple Users then we need to check the permissions assigned.
Regards,
Praveen

Is it possible to keep an email account on the iPhone but stop if from checking for new mail?

I have an email account that has been deleted from the provider (Gmail), but I want to keep the old mails on my phone, while stopping it from checking for new mail. Is this possible?
If I disable the account to stop if from checking for new mail (and producing a bunch of annoying pop-ups every time the mail app is opened), the account becomes invisible and the old mails disappear. I want to keep them visible to I can read and refer to them, but want to stop the phone from trying to download new ones or check the account.
Any help appreciated.

Thanks for the thought. In this case, that doesn't really help much, as it requires a bunch of button pushing just to check emails. Plus, if I'm not mistaken, in addition to switching modes every time I check email, it also prevents the other accounts from downloading the most recent mails as well. Since it's possible to keep an account on a Mac computer, but take it offline, it's very disappointing if there isn't a way to do the equivalent on an iPhone so that it passively holds the mails but doesn't send constant pop-ups every time the app is accessed.

Can i restrict apple mail client from downloading all emails...and allow it to pick a start date for gmail mail to sync? i am flooded with old emails, thousands on them ...eating hard drive space of my macbook pro and un necessary overhead

can i restrict apple mail client from downloading all emails...and allow it to pick a start date for gmail mail to sync? i am flooded with old emails, thousands on them ...eating hard drive space of my macbook pro and un necessary overhead

The genius bar technicians can check your MBP for possible hardware problems and specific software issues that you may have. The diagnosis will be free. Any extensive repairs will not be free.
If you have minor software problems, you essentially will have to deal with them yourself. Examine these two comprehensive documents for possible problem definition and solutions. If you encounter problems that you are unable to cope with, start a new discussion and there will be persons willing to assist you in solving them.
https://discussions.apple.com/docs/DOC-3521
https://discussions.apple.com/docs/DOC-3353
Ciao.

Creation of a new Keychain Entry (Internet password) for Apple Mail

I am working on a Mail Assistant to set up a new Mail Account for Apple Mail.
My problem concerns the creation of the Keychain Entry for the POP Account with which Apple Mail is set up (by my custom Mail Assistant).
I am able to create a Keychain Entry with all relevant User Data, the Keychain Entry also appears to be valid (I ran the Keychain First Aid Tool to check it), but when I start the Apple Mail App, it does not recognise the created Keychain entry, but is asking me to enter the Password for the POP Account which I set up successfully.
Any help is appreciated for giving me a hint of how Apple Mail recognises or links respectively to its adherent Keychain Entry.
Thanks in advance
Thomas

Couple of things to try Theo...
Safe Boot, (holding Shift key down at bootup), & use Disk Utility from there to Repair Permissions, reboot once more.
Open Keychain Access in Utilities, use Keychain First Aid under the Window Menu item, then either check the Password under that item, change it, or delete it and start over.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544

What are the settings for yahoo mail?

Have problems receiving and sending mail.
What are the correct settings for yahoo mail?

It used to be that the free yahoo account did not give you IMAP access, only POP3 or webmail. However this may since have changed in view of the fact Google Gmail has offered free IMAP access for years.
I found the following article which may answer your questions.
http://help.yahoo.com/kb/index?page=content&y=PROD_MAIL_MOBILE&locale=en_US&id=S LN3361&pir=AHBwS9dibUmrlB_KW6ZMhyaJeg.v4XZovbSYR.M5730pZVRvNgWxE.nZDLlazK4PlEeKf vsVKVTw3InF2BTBJ4_jWs0HtZO42gwyuFUU8WJY0WG4i5gFYtc96_iqfP1IpmWVOKGJN1a93bBUrlLyj SmkLEUA2t0nB6SgfOxv_lmafiJEBsv6VYVANICO9Lw5cTIGlODAaOSkRPaeaqXcZ1wjv3h3HNQtwC7gk 47flgw9a2x8AksnnZfvOZjd.JMBWL8D6j_2H89MNwSxG1r5ncOU1vrnG5NrdKeOhz2e8wHFAkHKykqlK moJF9UAOiUxj0I8ODl7AN1MiuAIB8X9gBos3CLh3r0CkOzObX7DMNR9iw8As1hEW1Yg3gO9IB7DG4zr. KXl0b2TQGOFffS2cP4k3t3KE.LKFeKhmcmfKiiJP_C2ajQKvQDEVOHrsRQ.z6zwTIG4

HT4863 How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?

How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?

You can't change it, and I suspect few email providers would allow a file that big. Consider uploading it to a service like Dropbox, then email the link allowing the recipient to download it.

Check for new mail not working on one account

For a number of months now I have been having trouble getting new mail. I have my Apple Mail 2.1 preferences set to check for new mail every minute and play a New Mail Sound when something arrives. This seems to be working for my earthlink POP account but not my dot.mac e-mail account. The only way to get new dot.mac e-mail on my G5 tower is to alternately click on the left most icons for the different incomming tray icons in my in box, then the InBox icon itself. I dont have to do that for my second e-mail account--an earthlink POP account, or on either account on my laptop. Also, When I do click on the specific in box for my dot mac account, it takes forever to load that new mail, and the activity monitor shows that it is caching every attachment that is already in my in box even though it is already old mail.
Also, Mail seems to be following Smart Mailboxes arbitrarily. For instance, I have a smart mailbox set up to display any incoming mail from someone in my Family Group from address book, however it seems to ignore about half of these, but display the other half accurately.
Anyone know whats going on or how to fix it so I dont have to mannually keep checking for new mail? Again, I have my preferences set to check for new mail every minute and to play a new mail sound, and new mail does work fine from my Earthlink POP account.
Thanks for your help.
LANNY
Dual 2GHz G5 Power PC; Titanium PowerBook Mac OS X (10.4.8)

If this happens to your .Mac account only, try rebuilding the mailbox, i.e. select it and do Mailbox > Rebuild.

I have just upgraded to Mountain Lion and my signatures for my Mail is not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice

I have just upgraded to Mountain Lion and my signatures for my Mail are not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice. Yesterday, the signatures were stacking instead of switching to the one I wanted to choose.

I had this and fixed it.
I had upgraded to Mountain Lion and my signatures in Mail were fine. But then about a week later, I got a new computer and used Migration Assistant to copy my stuff to the new machine. Upon opening Mail, I had all the correct Signature information in the Preferences>Signatures window, but nothing worked.
After lots of hunting, I found the Signature Folder. It's in:
Yourusername>Library>Mail>V2>MailData>Signatures
Looking at my previous setup (which works) I saw in that folder two types of files: .webarchive and .siganture
Looking in my new machine's Signature folder, I saw only the .webarchive folders, not the .signature folders
Since this was literally a clone of my previous setup to a new machine, here's what I did:
1. Quit Mail
2. In Problem machine, go to
Yourusername>Library>Mail>V2>MailData>Signatures
3. Move the Signatures folder someplace safe, but out of the MailData folder
4. Get the Signatures Folder from the working install (like a backup) and copy it to the MailData folder on the problematic machine
5. Start Mail on the problem machine
This worked for me. I don't know why Migration Assistant didn't copy the full signature folder, but this fixed it. It worked perfectly partly because I had just backed up with Carbon Copy Cloner and the very next day set up the new machine. I don't know where Lion or earlier versions of mail stored signatures, but the absence of the .signature filetype seems to be the problem.
Hope this helps

Return receipt plug in for Mac Mail software?

Return receipt for Mac OSX 10.4.6 build in email software “Mail” 2.0.7 (746.2/749.3) 2005 Apple Inc.
Is there a return receipt plug in for Mac Mail software? I want to know if my sent mail was received and know if the mail was opened.

Kboo,
in general not a good idea. This may cause loops with Out-of-Office responders and also not a very trustworthy confirmation.
Options are to use certified email servers as an intermediate (google to find many) or to request explicitly a written reply from the recipient.
See also this post (there are many more when you search here)
http://discussions.apple.com/message.jspa?messageID=713245#713245

Checking for new mail icon next to mailbox seems to have disapeared

After upgrading to OS X Mountain Lion I noticed that the icon next to each mailbox that shows when checking for new mail is not there. I wonder if anyone else has noticed this, and if they have found a fix?

Yes, the little "spinner" is gone with Mountain Lion. It's checking mail, you just don't see it.

Only one signature for all mail accounts very limiting

while the iphone is a very cool tool, i'm using the iphone for personal and work email,
and i find it very limiting that there is only one signature possible for all mail accounts.
standard, we all found out is written "written on my iphone" or something like that.
i always thought it was very dorky when i read that from blueberry users last year, (as if i'm interested that someone reads and writes his work e-mails from a mobile)
so, lets stop pretending it is cool to mail from the iphone, but just do it with all functionality it should have.
like having multiple signatures for example with work signature when i'm working, and personal signatures when not
meanwhile, can you (apple support) please help me loose less time when i want to erase my work signature every time i want to e-mail personally by adding functionality like "selecting bulk" and "cutting" (and then allowing to copy and paste while you're at it) to your sdk, Pronto please!
thanks!
anyone agrees? please follow up. maybe it helps speed up the improvement..

Once you sync your mail accounts with iTunes the first time, you can turn that off in iTunes. You don't need to do that anymore, unless you make a change to the account. It only syncs the settings. You can reset the sync history after deleting the accounts from your phone and then do another sync. That should correct the problem. I'm not as familiar with Mac computers, but maybe someone with a Mac can help a little.
Hope this answers your questions.

RSWUWFML2 for e-mail?

Similar Messages

Maybe you are looking for