RSWUWFML2 program job variant issue continues.......

Hi Experts,
I have scheduled the program for the given detail below current. Problem is when user not executed the workitem, same mail is sent multiple time that user has a new workitem in his inbox. is there any presetting missed?
Scheduled variant for RSWUWFML2 as given detail:
Instance data block:
job suffix 2
task blank
language blank
new workitems only tick
send granularity block:
one message per workitem selected.
There is no attachement to message so no selection in "Add Executable Attachment to Message For block"
Standard text for notification block: same as Standard
date: Null
Time: Null
Log: Errors Only
Issue: external mail sends without any issue but repeating for the same worktiem for multiple time.
SKC, i to have the same problem.... hope experts give solution here you can use this thread.
thanks in advance,
Regards,
Hari.

Hi,
Make sure that the user that the job is scheduled for has enough authorisations (SAP_ALL & SAP_NEW). I remember having similar problem some years ago, and while debugging I found out that the user was not allowed to write to the table, in which the job time stamp is stored (=all items are then always "new" for the report).
Regards,
Karri

Similar Messages

  • RSWUWFML2 Program - Sending multiple notification to outlook every 10 mins

    Hi All
    Below is my issue.
    I have scheduled a decision task and created a variant to the RSWUWFML2 program. This program is scheduled to run every 10 mins in background by WF-BATCH agent with the variant.
    The issue is :
    When i create a document in FV60 the approver is identified by a custom method and passed to the decision task. The approver gets 5 emails for the same document every 10 mins until he approves. But this happening only in outlook for email alone not in SBWP (The user gets only one workitem).
    I thought there would be a problem with the background job, to make sure of this i run the RSWUMFML2 program manually with the variant , which stopped sending the mail.
    Can anyone help me out , how i need to proceed further to fix this issue?
    Thanks
    Shree

    Hello,
    You said:
    "i run the RSWUMFML2 program manually with the variant , which stopped sending the mail."
    Do you mean that it only sent it once, or that it didn't send it at all?
    That's very strange that it runs every 10 mins, and yet sends out 5 mails every 10 mins.
    Are you sure there aren't 5 occurrences of RSWUMFML2 running?
    What do the timestamps look like on these 5 mails: the same, or different, or spaced evenly?
    regards
    Rick Bakker
    Hanabi Technology

  • Program RSWFSLSDLEX, variant &0000000000001

    Hi All´s,
    After back to 400PRD constituents 250QA. gives me the following error by sm21.
    Transaction Canceled DB 612 ( #0000000000001 RSWFSLSDLEX )
    when looking for tx sm37 tells me that the job has been canceled SWFSLSDLEX and the log says, gives me the following error by sm21.
    Job started
    Step 001 started (program RSWFSLSDLEX, variant &0000000000001, user ID WF-BATCH)
    Variant &0000000000001 does not exist
    Job cancelled
    in such case what would be the procedure to repair this job.
    Thanks and regards
    Gustavo Gonzalez.

    Hi Gustavo
    Refer to
    http://mailman.mit.edu/pipermail/sap-wug/2008-June/028829.html
    This will help
    Rohit

  • I was wondering how come my Acrobat 6.0 Professional Standard before I had no problem now when I use it it states the program has compatibility issues, I have windows 7 what can I do..it was working before

    I am looking for help in correcting this issue... I had no problem before using my Acrobat 6.0 professional to create word documents to pdf...now when I go to use it there seems to be a problem
    it states that the program has compatibility issues with window 7
    can anyone help please.

    To expand on this, the PDF creation aspect of Acrobat  had to be updated to deal with changes in the Windows spooling system (for the Adobe PDF PostScript printer driver instance) as well as to support 64-bit versions of Windows.
              - Dov

  • Schedule Programming (Jobs)

    Hi
    What is Schedule Programming (Jobs?)
    How to set the Schedule Programming (Jobs) please give me the detailed program
    Thanks
    Mahesh

    Hi Kumar,
    Do you mean the Scheduling of the Batch Jobs in SAP System? If so, then you can have a look at the following link:
    http://help.sap.com/saphelp_45b/helpdata/en/c4/3a7ef8505211d189550000e829fbbd/content.htm
       1. Job scheduling: Before the background processing system can do anything, background jobs have to be scheduled. This can occur in transaction SM36 (job scheduling), in the ABAP editor (transactions SA38 and SE38, the "start program in the background" execution option), or through the programming interface or external interface of the background processing system. Many R/3 applications use the internal programming interface to schedule long-running reports for background processing.
       2. Job storage management: Jobs are stored in the R/3 database. Principal tables in the background processing system include the following:
              o TBTCO: The job header table (job management data)
              o TBTCP: The job step table (individual processing steps in jobs)
              o TBTCS: The control table for the time-driven job scheduler
              o BTCEVTJOB: Jobs scheduled to wait for an event
    Job logs are held in the R/3 "TemSe" (Temporary-Sequential Objects) database. The TemSe is set always to hold job logs as files in your host systems.
    Accessing job logs for display and managing job log storage is transparent for you. You can display or delete job logs by way of the job overview (transaction SM37) or the graphical background monitor. Old job logs are removed automatically together with the jobs to which they belong by the ABAP program RSBTCDEL, which should always be scheduled to run periodically (see Required Basis Background Jobs).
    Let me know if you need something else.
    Hope this will help.
    Thanks,
    Samantak.

  • We are looking for a software which converts SWF to MP4, we found many software which does the job but issue is file size is not optimize.  We found Adobe captivate 6 which gives optimum quality with good output but thing is we do not have batch process i

    Hi
    We are looking for a software which converts SWF to MP4, we found many software which does the job but issue is file size is not optimize.
      We found Adobe captivate 6 which gives optimum quality with good output but thing is we do not have batch process in captivate 6. so we request you to create a plugin or give a best option which have batch render quality and optimize in file size,

    Captivate is e-learning development software not a dedicated video convertor, you are better off trying something like Adobe Media Encoder or Super.

  • Error 100a --- if this issue continues, please contact HP Support

    Hi, got HP DV6-1103AX and did a clean form yesterday. The whole recorvery process had no option to create a new partition besides factory partition - one huge 221GB (system boot etc) and one Recovery Partition. Tried on windows disk management and it could only shrink 9GB that is bit pointless. Then I ran Partition Wizard freeware and apparetly it could shrink 9GB as well. This software requires HP notebook to reboot and one page shows 'no reboot device found'. In that case, I had to restart with F11 and do a clean recovery again. Half way, I was told 'Error 100a --- if this issue continues, please contact HP Support'.
    Please let me know what I should do to fix this and how to create the additonal partition (150GB or bigger)  besides the factory 2 partitions (C: system boot & D: Recovery)

    Thank you. Tried a partition software, can't remember 'Partitiion Magic' or ' Partition Wizard'. It did partition a new hard hard max size 9GB, same result as 'diskmgmt.msc' in Windows. Anyway, the worse problem is after the partition, HP fails to recover the system and gives Error1000a. When HP has such a message, what shall I do next?

  • MacBook Pro 2011 Repair Extension Program for Video Issues -Feedback?

    Anybody have any feedback from the MacBook Pro 2011 Repair Extension Program for Video Issues?
    I had my early 2011 15 inch 8,2 repaired (free) under the extension program. The machine now appears to run well - but much hotter than before. The case is significantly hotter - especially at the GPU corner and the fans are constantly on moderate to high (not full). Anybody else experiencing similar changes?

    Run an Apple Hardware Test;
    https://support.apple.com/en-us/HT201257
    Note an error free AHT is not definitive.
    install iStat menus:
    http://bjango.com/mac/istatmenus/
    Set Activity Monitor to ALL PROCESSES and set CPU to display values from high to low.
    When the MBP gets hot, post images of both for inspection.
    Ciao.

  • Job variant

    Hello ,
    how  to  create  a  Job  variant  and  obtain  transport  request  for  this?
    I  am  triyng  in  development  system through SE38  but  the  system doesnt  give  me  the  request...
    Is  there  another  possibility?
    Thanks and  BR
    L

    I thought  the  same  but  looks  that  the  basis  guys  are  able  to  transport  it

  • How do I pass an error status from my java code back to the Program Job Ser

    How do I pass an error status from my java code back to the Program Job Server?
    I have a jar program object that reports a scheduled status of "Success" even if the java code errors out.

    Exceptions thrown from the program object are ignored by the program job server.
    You need to configure the Program Object, then stream out a special string sequence to the stdout of the Program Object, to set the scheduled instance status to Failed.
    Look up SAP KBase  1201804 - How to programmatically set the status of a Program object to "Failed"
    Sincerely,
    Ted Ueda

  • JPO to send email to users from Program Job Server?

    I have a java program object in XI R2 SP4 using BO Enterprise SDK APIs that sets the ISMPTOptions for a program job server.  For example, I set bogus information for the SMPT server domain, Server name, SMPT user name and password, To Addresses (i.e.user email addresses) for the programjobserver since I'm debugging in an environment that does not have an email server.
    When I execute the program, I'm sure that the emails are not being sent to the users but there are no errors reported in the  java program or program job server since it executes successfully.
    How can I debug this program or progam job server to determine where to find the status of the SMPT email operation? 
    My audit report in CMC shows no errors for this server and that it executes successfully.

    Old school and write everything out in the Java Program Object to System.out - you can view the stdout output by clicking on the instance after it's completed.
    Sincerely,
    Ted Ueda

  • "Slow typing in Mail" issue continues in Lion

    The "Slow typing in Mail" issue continues in Lion. Has anyone found a fix yet?

    Well, when typing in MAIL, the letters manifest VERY SLOWLY. I am know ACE typist, and it can't keep up with me. I type even a few characters, and wait for several seconds for my textual desires to appear.
    This was well discussed under Snow Leopard, I see.
    Restarting the App often helps for several minutes, but no more.

  • How to create a job thru ABAP program for calling a program with variant???

    Hello experts,
    can u give me step wise procedure to create jobs for  a program with a variant name thru ABAP???
    Also, can a transaction can be scheduled as a job to run in background with a variant name???
    Edited by: SAP USER on Jul 22, 2008 6:08 AM

    Hi,
    To create a job through ABAP program you can do the following.
    Go to Menu bar.
    In there, go to   SYTSTEM> SERVICES> JOBS--> DEFINE JOB.
    Then give the JOB NAME and CLASS in the screen that comes up.
    This is how we schedule a program.
    Now, to create a variant for a program -
    First activate your program in SE38. Then execute it .
    Now, click on SAVE button. It will open up  the variant creation screen. Give the details there like variant name and value for the fields. Save and come back.
    Hope this helps.
    Regards,
    Hari Kiran

  • Find programs/jobs having sales org in variant

    Hi,
    We are going to have some new sales org created in our SAP system(4.6C). After creating these sales orgs we need to modify variants of batch job which are using sales org as a parameter or select option. Is there any standard program which can be used to list all programs which has sales org(VKORG) in its selection screen.
    Regards,
    Sajith.

    In that case I would agree with Thomas on writing a cusotm program with RS_VARIANT_CONTENTS.
    Get all the custom programs...then in loop get all the variants...and then get the contents and scan through the contents.
    but I think maybe scanning the OBJECTS table will be better in this case than VALUETAB. VALUTAB is helpful if you know the value you are looking for. In your case you want to add new values to vkorg, so searching the OBJECTS table for vkorg might be helpful.
    Again it does not guarantee the entire list because the list will only show what the programmer named the field.

  • Variants issue - Standard program RFEPOJ00 - Upgrade

    Hi Experts,
    I'm facing an issue with variant created for a standard program. Recently, development system got upgraded to newer version. In old systems I've craeted a variant for program RFEPOJ00, which is working fine. All variants got copied into new system in the process of upgrade. The variant is not working in new system and I'm getting 'Varaint <varaint_name> of program RFEPOJ00 is not the current version' error. Usually, this type error will be displayed when program there is any change in selection screen parameters (type, length, etc.,). But, there are no changes in program as well as in selection parameters.
    I can adjust the variant, but I want to know what might be the issue.
    Please help me in this.
    Thanks in Advance,
    Siva Sankar

    Run standard SAP program RSVARDOC_610 to bring old variants up to date.
    Rob

Maybe you are looking for