RSWUWFML2 sending mail to all possible agents

I have configured RSWUWFML2 and it is sending mail to Notes fine just the wrong agents.  I am wanting to send workflow messages from tasks etc in Quality Notifications and I have created an org structure and just assigned this structure as the agent in the workflow config.  When I assign an individual in the notification to a task only that user is getting the actual workflow in SBWP, which is great,  however notes mails are being sent to all possible agents, i.e. those in the org structure.  Anybody encountered this before? and how to stop it?

Please check in the workflow log which are the agents it is going to?
I think it is going to all users and the user you are saying is also receiving at.
Please make your agent assignment properly in order the workitem not being sent to all users.
Thanks
Arghadip

Similar Messages

  • Sending mail to all users

    Folks,
    In Communigate there was a default 'all' account which could be used to send mail to all users. I know I could set up a mailing list to do this but does the Apple Mail server have a built in option for sending an email to all users?
    /// kak
    powerbook   Mac OS X (10.4.7)  

    No there is no such option.
    You will either need to setup a mailing list or create an alias that forwards to all your users.
    Obviously both solutions require that you add new users to the mailing list or alias.

  • Sending mail to all users in Messaging Server 5.2

    Hi,
    I'm trying to send mail to all the users in my mail server, but haven't been able to do it. I'm using a command called deliver which is found in /opt/iplanet/server5/bin/msg/store/bin . I've tried sending messages to all users but have been successful in sending only to one user. Got any ideas??

    To create a dynamic mailing list:
    http://docs.sun.com/source/816-6009-10/users.htm
    If you're familir with ldapmodify, you can locate the user's pab in the directory server, and remove what you find there, but, honestly, I'd talk to the user first.. . .. .
    A user can work around removal of such, very easily. Any mail client, and a copy/paste will do it.

  • Transaction failed: Cannot send mail due to possible abuse

    For the past two days, I have not been able to send mail from one of my Verizon.net sub-accounts using Mozilla Thunderbird. However I can send mail from the Verizon Yahoo webmail website.
    I get this error message:
    An error occurred while sending mail. Transaction failed: Cannot send mail due to possible abuse; please visit http://postmaster.yahoo.com/abuse_smtp.html for more information.
    And when I click on "OK" in the message box, this second error message pops up:
    Sending of message failed. The message could not be sent because the connection to SMTP server outgoing.yahoo.verizon.net was lost in the middle of the transaction. Try again or contact your network administrator.
    When I go to http://postmaster.yahoo.com/abuse_smtp.html, there is just a generic Yahoo help page, with nothing specific about this problem.

    The possible abuse is likely a 24 hour hold for accounts suspected of sending Spam. Are you still having issues? Also what ports do you have the incoming/outgoing server set to?
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • Sending mail to all partner function in transaction

    Hi Folks,
    Standard action and condition sends mail to only main partner function in transaction. But transaction could have more than one partners for same partner function. Can mail be sent to all partners in transaction by using standard action configuration?
    Regards,
    Nikhil

    Hi Nikhil,
    You can control this using CRM_ACTION_BADI.
    Below the use of this BADI.
    In partner-dependent actions, business partners that occur in several functions, only the main partner remains.
    This can be useful, for example to avoid sending the same e-mail to the same business partner if there are several action definitions for different partner functions or function types.
    However, if several different actions have been defined as partner- dependent, this effect may not be required.
    In this case, the CRM_ACTION_BADI standard implementation can be deactivated. In this case, all partners from the transaction are considered during action determination.
    If this is also not required, a new implementation can be created.
    Hope this helps.
    Cheers, Satish

  • Sending Mail to all E-Mail Accounts for a Contact

    Hi all,
    When I'm sending mail to someone in Address Book, is there a way I can send the mail to all of their email accounts?
    Thanks

    The only "simple" way to achieve this is to create a new card for each email that contact has, then add them to a group, then when you send an email, select that group and the email will be sent to each of the email addresses of your contact.
    hope this helps

  • Still not sending mail tried all

    I just got my new Quad Mac Pro and I was totally ready for the mail sending problem. I have been following here for a while and was fairly certain I would not have a problem.
    I have a typical cable (Time Warner Road Runner) account and have a gmail address. Auto setup tries to create an IMAP mailbox when I first launched Mail, but I use POP. So I made the changes on the incoming server and immediately got my mail to download. I went to the outgoing server edit list and selected custom port, entered 25, set the authentication to password, included my password.
    I was so sure I was on it, but I failed! No send.
    I am at a loss, and it is way late. I will try again tomorrow.
    Andy

    William Kucharski
    As you kids say, you sir are 'The Bom!' That was the entire solution to my problem with a caveat. I made the changes suggested on that page to my account settings and still no joy. I believe that there were some bits of information still lingering in the .plist, so I deleted that after deleting the account. I have an unused account with a .rr.com domain, so I set that up first. I was able to get Mail to let me set up the account manually (an issue with sending the password caused this) With the standard 'custom port 25' setting that account could send mail (and receive all the spam there!)
    I then had to fool Mail into letting me setup the new Gmail account manually as well. If I allowed the Mail program to try to set it up, it would try to set it up as an IMAP account, and even with the changes made in the account settings it would not send mail from that account. Again I think it was something being hidden in the .plist that would not go away. So, another deletion of the .plist and tricking Mail into a manual setup by entering a bogus .rr.com account allowed me to create a new account as a POP account.
    I made all the settings as suggested by google on your link and BAM, Bob's your Uncle!
    Thank you so much. I would have spent hours.
    Andy
    p.s. Carolyn, that link was for setting up Mail 3, which unfortunately was unhelpful.

  • How to send mail to all the receipients in distribution list

    Hi All,
    As per my requirement I need to send error log in doc format.
    I am using the help of following code suggested by someone in sdn.
    Mehr Beispile unter BCS_EXAMPLE_* mit se38
    Mehr Beispile unter BCS_TEST*     mit se38
    DATA: SEND_REQUEST       TYPE REF TO CL_BCS.
    DATA: SUBJECT            TYPE SO_OBJ_DES.
    DATA: ATT_TYPE           TYPE SOODK-OBJTP.
    DATA: IT_TEXT            TYPE BCSY_TEXT.
    DATA: WA_TEXT            LIKE SOLI.
    DATA: IT_BIN             TYPE SOLIX_TAB.
    DATA: WA_BIN             TYPE SOLIX.
    DATA: DOCUMENT           TYPE REF TO CL_DOCUMENT_BCS.
    DATA: SENDER             TYPE REF TO CL_SAPUSER_BCS.
    DATA: RECIPIENT          TYPE REF TO IF_RECIPIENT_BCS.
    DATA: BCS_EXCEPTION      TYPE REF TO CX_BCS.
    DATA: SENT_TO_ALL        TYPE OS_BOOLEAN.
    Bytes der Datei
    DATA: IT_LENGHT          TYPE SO_OBJ_LEN.
    DATA: N10(10)            TYPE N.
    START-OF-SELECTION.
      PERFORM MAIN.
      PERFORM RSCONN01_EXECUTE.
    END-OF-SELECTION.
    FORM MAIN.
      TRY.
    Dokument erstellen (mit Anhang)
          SEND_REQUEST = CL_BCS=>CREATE_PERSISTENT( ).
          PERFORM HEAD_CONT.
          PERFORM RAW_ATT.
    Dokument (mit Anhang) setzen
          CALL METHOD SEND_REQUEST->SET_DOCUMENT( DOCUMENT ).
    Absender setzen
          SENDER = CL_SAPUSER_BCS=>CREATE( SY-UNAME ).
          CALL METHOD SEND_REQUEST->SET_SENDER
            EXPORTING
              I_SENDER = SENDER.
    Empfänger setzen
          RECIPIENT = CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS(
                                            'email@address' ).
          CALL METHOD SEND_REQUEST->ADD_RECIPIENT
            EXPORTING
              I_RECIPIENT = RECIPIENT
              I_EXPRESS   = 'X'.
    Dokument senden
          CALL METHOD SEND_REQUEST->SEND(
            EXPORTING
              I_WITH_ERROR_SCREEN = 'X'
            RECEIVING
              RESULT              = SENT_TO_ALL ).
          COMMIT WORK.
    Sende-Error abfangen
        CATCH CX_BCS INTO BCS_EXCEPTION.
          WRITE: 'Fehler aufgetreten.'(001).
          WRITE: 'Fehlertyp:'(002), BCS_EXCEPTION->ERROR_TYPE.
          EXIT.
      ENDTRY.
    ENDFORM.                    "main
    FORM HEAD_CONT.
      CLEAR: IT_TEXT[], WA_TEXT, SUBJECT.
      ATT_TYPE = 'RAW'.
      SUBJECT = 'Betreffzeile'.
      WA_TEXT = 'First Line'. APPEND WA_TEXT TO IT_TEXT.
      WA_TEXT = 'Second Line'. APPEND WA_TEXT TO IT_TEXT.
      DESCRIBE TABLE IT_TEXT LINES N10.
      N10 = ( N10 - 1 ) * 255 + STRLEN( WA_TEXT ).
      IT_LENGHT = N10.
      TRY.
          DOCUMENT = CL_DOCUMENT_BCS=>CREATE_DOCUMENT(
                    I_TYPE    = ATT_TYPE
                    I_TEXT    = IT_TEXT
                    I_LENGTH  = IT_LENGHT
                    I_SUBJECT = SUBJECT ).
    Error abfangen
        CATCH CX_BCS INTO BCS_EXCEPTION.
          WRITE: 'Fehler aufgetreten.'(001).
          WRITE: 'Fehlertyp:'(002), BCS_EXCEPTION->ERROR_TYPE.
          EXIT.
      ENDTRY.
    ENDFORM.                    "HEAD_CONT
    *&      Form  RAW_ATT
          text
    FORM RAW_ATT.
      CLEAR: IT_TEXT[], WA_TEXT, SUBJECT.
      ATT_TYPE = 'RAW'.
      SUBJECT = 'Text Anhang'.
      WA_TEXT = 'First Line in ATT'. APPEND WA_TEXT TO IT_TEXT.
      WA_TEXT = 'Second Line in ATT'. APPEND WA_TEXT TO IT_TEXT.
    Lenght of Att_Text
      DESCRIBE TABLE IT_TEXT LINES N10.
      N10 = ( N10 - 1 ) * 255 + STRLEN( WA_TEXT ).
      IT_LENGHT = N10.
      TRY.
          CALL METHOD DOCUMENT->ADD_ATTACHMENT
            EXPORTING
              I_ATTACHMENT_TYPE    = ATT_TYPE
              I_ATT_CONTENT_TEXT   = IT_TEXT
              I_ATTACHMENT_SIZE    = IT_LENGHT
              I_ATTACHMENT_SUBJECT = SUBJECT.
    Error abfangen
        CATCH CX_BCS INTO BCS_EXCEPTION.
          WRITE: 'Fehler aufgetreten.'(001).
          WRITE: 'Fehlertyp:'(002), BCS_EXCEPTION->ERROR_TYPE.
          EXIT.
      ENDTRY.
    ENDFORM.                    "ATT_RAW
    But From this method I am not able to send the mail to the distribution list created.
    Please suggest How this can be done.
    I dont want to chang

    Hi Smriti,
    You can make changes like shown below. The changes are shown in the code format for your easy reference. You can remove the code in bold. This will work.
    Mehr Beispile unter BCS_EXAMPLE_* mit se38
    Mehr Beispile unter BCS_TEST* mit se38
    DATA: SEND_REQUEST TYPE REF TO CL_BCS.
    DATA: SUBJECT TYPE SO_OBJ_DES.
    DATA: ATT_TYPE TYPE SOODK-OBJTP.
    DATA: IT_TEXT TYPE BCSY_TEXT.
    DATA: WA_TEXT LIKE SOLI.
    DATA: IT_BIN TYPE SOLIX_TAB.
    DATA: WA_BIN TYPE SOLIX.
    DATA: DOCUMENT TYPE REF TO CL_DOCUMENT_BCS.
    DATA: SENDER TYPE REF TO CL_SAPUSER_BCS.
    DATA: RECIPIENT TYPE REF TO IF_RECIPIENT_BCS.
    DATA: BCS_EXCEPTION TYPE REF TO CX_BCS.
    DATA: SENT_TO_ALL TYPE OS_BOOLEAN.
    Bytes der Datei
    DATA: IT_LENGHT TYPE SO_OBJ_LEN.
    DATA: N10(10) TYPE N.
    data: it_recipients type standard table of ad_smtpadr.
    data: w_recipients type ad_smtpadr.
    START-OF-SELECTION.
    PERFORM MAIN.
    PERFORM RSCONN01_EXECUTE.
    END-OF-SELECTION.
    FORM MAIN.
    TRY.
    Dokument erstellen (mit Anhang)
    SEND_REQUEST = CL_BCS=>CREATE_PERSISTENT( ).
    PERFORM HEAD_CONT.
    PERFORM RAW_ATT.
    Dokument (mit Anhang) setzen
    CALL METHOD SEND_REQUEST->SET_DOCUMENT( DOCUMENT ).
    Absender setzen
    SENDER = CL_SAPUSER_BCS=>CREATE( SY-UNAME ).
    CALL METHOD SEND_REQUEST->SET_SENDER
    EXPORTING
    I_SENDER = SENDER.
    Empfänger setzen
    LOOP AT it_recipients into w_recipients.
    RECIPIENT = CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS(w_recipients).
    CALL METHOD SEND_REQUEST->ADD_RECIPIENT
    EXPORTING
    I_RECIPIENT = RECIPIENT
    I_EXPRESS = 'X'.
    ENDLOOP.
    RECIPIENT = CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS('email@address' ).
    CALL METHOD SEND_REQUEST->ADD_RECIPIENT
    EXPORTING
    I_RECIPIENT = RECIPIENT
    I_EXPRESS = 'X'.
    Dokument senden
    CALL METHOD SEND_REQUEST->SEND(
    EXPORTING
    I_WITH_ERROR_SCREEN = 'X'
    RECEIVING
    RESULT = SENT_TO_ALL ).
    COMMIT WORK.
    Sende-Error abfangen
    CATCH CX_BCS INTO BCS_EXCEPTION.
    WRITE: 'Fehler aufgetreten.'(001).
    WRITE: 'Fehlertyp:'(002), BCS_EXCEPTION->ERROR_TYPE.
    EXIT.
    ENDTRY.
    ENDFORM. "main
    FORM HEAD_CONT.
    CLEAR: IT_TEXT[], WA_TEXT, SUBJECT.
    ATT_TYPE = 'RAW'.
    SUBJECT = 'Betreffzeile'.
    WA_TEXT = 'First Line'. APPEND WA_TEXT TO IT_TEXT.
    WA_TEXT = 'Second Line'. APPEND WA_TEXT TO IT_TEXT.
    DESCRIBE TABLE IT_TEXT LINES N10.
    N10 = ( N10 - 1 ) * 255 + STRLEN( WA_TEXT ).
    IT_LENGHT = N10.
    TRY.
    DOCUMENT = CL_DOCUMENT_BCS=>CREATE_DOCUMENT(
    I_TYPE = ATT_TYPE
    I_TEXT = IT_TEXT
    I_LENGTH = IT_LENGHT
    I_SUBJECT = SUBJECT ).
    Error abfangen
    CATCH CX_BCS INTO BCS_EXCEPTION.
    WRITE: 'Fehler aufgetreten.'(001).
    WRITE: 'Fehlertyp:'(002), BCS_EXCEPTION->ERROR_TYPE.
    EXIT.
    ENDTRY.
    ENDFORM. "HEAD_CONT
    *& Form RAW_ATT
    text
    FORM RAW_ATT.
    CLEAR: IT_TEXT[], WA_TEXT, SUBJECT.
    ATT_TYPE = 'RAW'.
    SUBJECT = 'Text Anhang'.
    WA_TEXT = 'First Line in ATT'. APPEND WA_TEXT TO IT_TEXT.
    WA_TEXT = 'Second Line in ATT'. APPEND WA_TEXT TO IT_TEXT.
    Lenght of Att_Text
    DESCRIBE TABLE IT_TEXT LINES N10.
    N10 = ( N10 - 1 ) * 255 + STRLEN( WA_TEXT ).
    IT_LENGHT = N10.
    TRY.
    CALL METHOD DOCUMENT->ADD_ATTACHMENT
    EXPORTING
    I_ATTACHMENT_TYPE = ATT_TYPE
    I_ATT_CONTENT_TEXT = IT_TEXT
    I_ATTACHMENT_SIZE = IT_LENGHT
    I_ATTACHMENT_SUBJECT = SUBJECT.
    Error abfangen
    CATCH CX_BCS INTO BCS_EXCEPTION.
    WRITE: 'Fehler aufgetreten.'(001).
    WRITE: 'Fehlertyp:'(002), BCS_EXCEPTION->ERROR_TYPE.
    EXIT.
    ENDTRY.
    ENDFORM. "ATT_RAW
    where the internal table "it_recipients" contains all the e-mail addresses.

  • Can't send mail using - all send mail servers offline

    I am not able to send any mail.  I've got many SMTP servers and have tried them all.  none send and I don't get an error.  Have rebooted and read in discussions and find no solution.   OS X 10.9.2   Finding myself concerned that Apple's QA/QC is lacking.. not what it once one.  Seeing increasing instability in general in core OS X apps.

    Mail is a bit weird sometimes...
    Does your network/ISP allow SMTP traffic?
    Have you linked each SMTP server to the correct mail account?
    Have you selected "Use only this server" ?
    Have you checked the port number being used?
    What are the mail providers are you using?

  • Can't send mail, says all accounts are offline...

    I have been trying to send emails all day, and for some reason it is not doing it. It says that my accounts are offline, and when I run Connection Doctor, it won't fix anything at all! AHH!! I don't know what to do at all, I have 5 different accounts, and none of them work. My firewall is not the problem, and I don't know what to go from here.
    It used to work, I installed Leopard last week, and everything was fine until now.
    Message was edited by: Vyrtue77

    You need to provide more information. What kind of email (POP or IMAP)? What is your network configuration like? Can you access other online resources? Is your email available via the web, and if so, can you get to it now?

  • TS3276 I could send mail and all of a sudden I cannot and it wants my password which it won't accept!

    My mail just stopped sending.  And it does not accept my password which I have written down and saved.  So I know it is correct.
    What happened?

    This happens to me only when I use wifi and figured out that it was because the connection was not good.
    So I got my wifi resolved and no longer have this problem.
    Are you using wifi?

  • Send mail as follow-up action in reporting agent

    I need to send a mail with the exceptions flaoting from a query. I tried to use the follow-up action of 'send mail' in the reporting agent. that didnt work because in our SAP we're not using the exchange connector and mails cannot be sent in the regular way.
    I have an external command of sending mail.
    Does anyone has a way of solving this problem, meaning, using my external command of sending mail in order to send the mail with the exceptions (this command works just fine in process chains, for example, for notification of process progress)
    Thank You,
    Yoav.

    Hello Nili,
    I think you can edit content and Subject etc.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/21/35783b82ee5d31e10000000a114084/content.htm
    Hope this helps.
    San.

  • How do you send an e-mail to all members of a defined group in smart groups?

    I am one of the organisers of an annual guitar meeting and want to send mail to all the regular attendees.
    I have set up a "Smart Group" and "Distribution List" but can't see how to send the information about our next meeting without entering all the e-mail addresses individually.
    Can anyone help please?

    Hi William,
    I've tried this, but it isn't working for me. Should I chnge the Smart Group, to an ordinary one?
    Thanks

  • Why Grid control will mis-judge agent state and send mail notifications?

    Sometime grid control will send mail notifications while the agent is still up.No log about network problems occur.So what about the root cause for this kind of issue?Has anyone falled into the same situation?And how to resolve?
    Thanks!

    Which alert are you getting?

  • Macbook Air- send mail to multiple person in contact with name of them in email

    Hi there, i use macbook air, in mail, i want to know if it is possible the if i wan to send email to multiple people in my contact and the name of the person will appear in the email message like Dear......... (follow by the name of person that i saved in the contact book)

    Hello Everyone,
    I have another issue.My workflow when directly executed sends mail to all users very quickly.All steps gets executed very quickly.This I could see through the workflow log and SOST and SCOT.But when I try to trigger the workflow through my transaction CRMD_ORDER(i have given proper BO and event) it is taking hours and still in Inprocess status.Infact its not even going to the first step(fetch email ids).
    I am totally confused on this behaviour.Kindly provide your ultimate solutions and I am very thankful for giving such good solutions to all my queries.
    Regds
    VLP

Maybe you are looking for