RT settings in FCP 7 not complete

Hi All, I have just found out that my RT settings are incomplete! I only seem to have the following settings Play base layer only / Use Playback settings /Full Quality and cannot seem to adjust them. I would like to not have render every time i made a change.
Also does anyone know if there is a free split screen plug-in available for FCP?
Thx guys

I have just found out that my RT settings are incomplete! I only seem to have the following settings Play base layer only / Use Playback settings /Full Quality and cannot seem to adjust them.
These only come when you use FCP codecs...stuff you find in the Easy Setup Menu: ProRes, DVCPRO HD, HDV, DV/NTSC. Use a non-FCP codec and you don't get real time.
I would like to not have render every time i made a change.
Again, your footage needs to be in the FCP codecs. What codec are you using?
Shane's Stock Answer #28: When I put a clip in the timline, I have to render it before it will play. Why?
Your clip settings MUST match your timeline settings. If you have DV/NTSC material, you need a DV/NTSC timeline. The frame rate, audio rate and dimensions (4:3, 16:9) all need to match exactly. In Final Cut Pro 6, this is easy, because when you drop a clip into the timeline, it asks if you want to set up the timeline to match the settings of the first clip you drag into it. Click YES and you are ready to go.
However, in FCP 5.1 and earlier, it is a bit trickier.
The most important thing you need to do is properly set up your project from the start, and the best way to do this is to choose a setting from the Easy Setups, located under the Final Cut Pro menu.
Once you do this, you’ll need to create a new sequence. This is because the sequence that is already in your new project is setup for the typical default setting of DV/NTSC, or for the settings of your last project, which might not match what you are currently working with. So delete SEQUENCE 1 and create a new sequence:
This new sequence will contain the settings you chose in the Easy Setup menu, and should match the format you captured.
Also does anyone know if there is a free split screen plug-in available for FCP?
Yeah, it's built into FCP. Just layer your footage, and adjust the SCALE and CENTER of the footage. Couldn't be easier. Or there's this one for $30: http://www.digital-heaven.co.uk/dh_box
Shane

Similar Messages

  • Video rendering : Could not complete the Render Video command because the settings in the file are invalid. What is this?

    not sure how to get past this?

    0s x 10.9.5
    2.9Ghz Intel Core i7
    16gb ram
    Intel HD Graphics 4000 1024 MB graphics
    Adobe CC 2014
    When I was half way through exporting it. That message came up.
    Could not complete the Render Video command because the settings in the file are invalid.

  • My iPad is frozen with the message not enough storage.  Options are close and settings but it will not respond to buttons and will not allow me to turn it completely off.  How do I get past that message?

    My iPad is frozen with the message not enough storage.  Options are close and settings but it will not respond to buttons and will not allow me to turn it completely off.  How do I get past that message?

    Delete some apps, files, photos, videos, movies, etc to free up some space.
    How much space is your Other using? You may be able to reduce.
    How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
    http://tinyurl.com/85w6xwn
    With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
     Cheers, Tom

  • HT4623 Hi. My device won't update iOS in settings. It won't download apps for me. Itis connected to the internet). The latest app I tried to download appears stuck! Has not completed its  download, won't open and I cannot delete it. What can I do?

    Hi. My device won't update iOS in settings. It won't download any new apps for me. (It is connected to the internet). The latest app I tried to download appears stuck! Has not completed its  download, won't open and I cannot delete it. What can I do? I purchased the product online a year ago. I'm not sure of the exact date... I think it was late November 2012.
    Any help appreciated.
    Fileas

    If this has happened more than once the problem is likely on your PC.
    See here: http://www.apple.com/support/iphone/assistant/itunes/

  • "Windows could not complete the installati​on" after restoring Lenovo T61 to factory settings, help!

    Hi everyone;
    I recently tried to restore T61 laptop to factory settings and I received the message "Windows could not complete the installation. To install windows on this computer, restart the installation". I used Dr. Google to see if I could fix the problem; but unfortunately after re-starting multiple times, restoring to factory settings (after changes to the Administrator account as well as "Oobe" settings, in any number of combinations); I still get the same error message. Any thoughts? I'm attempting to reinstall Windows Vista Business. I do apologize I'm not a computer person so if you need any additional details please let me know; thanks in advance!

    Hi,
    It may be a good idea to run a couple of hardware tests.
    Shut down the notebook.
    Tap away at the esc key as you start the notebook to enter the Start-up Menu.  Select the Diagnostic Menu option ( f2 ) and run the tests on the Hard Drive and Memory.
    If you get any error messages/codes, post back with the details.
    If the tests pass, you can order a replacement set of Recovery Discs starting on the link below - the cost does vary a little depending on where you live, but they're generally inexpensive.
    Order HP Recovery Media.
    If you have any problem with this link, see if you can order this directly from HP.
    If you live in the US, contact HP Here.
    If you are in another part of the world, start Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • After having upgraded my iPhone 4S to iOS 7.0.2, I can not turn on Wi-Fi or Bluetooth. After trying various tricks I found via online forums such as software reset, enable Airplane mode, and resetting the network settings, I have now also completed reset

    After having upgraded my iPhone 4S to iOS 7.0.2, I can not turn on Wi-Fi or Bluetooth. After trying various tricks I found via online forums such as software reset, enable Airplane mode, and resetting the network settings, I have now also completed reset of the phone WITHOUT success. Is there something more to it? If not learn hardly be any more iPhone for me. Really disappointed. Grateful for help!

    If you have tried all of the steps in this support document http://support.apple.com/kb/TS1559 and have completed all of the user troubleshooting, restart, reset, restore from backup, restore as new, then make an appointment with the Apple store to have the hardware checked.

  • Could not complete your request because the result would be too big - cs3

    I exported 1.32 minute of quicktime movie file from FCP into photoshop CS3 about five weeks ago.  Since then I've been diligently working on each individual frame.   I've about 10 seconds left to the end of file.  Unfortunately, I turned off my mac two nights ago and I can no longer open the file. The message says "could not complete your request because the result would be too big".  The file size is 1.16 GB and saved as .psd.  I'm working on Mac OS X 10.5.8.  Any suggestion or solution would be appreciated.

    Thanks c.pfaffenbichler!  I did the command-alt-shift and I also increased the RAM in Performance-Preferences from 1963 (69%)  to 1782 (90%).  I got the same message.  I've to admit that I'm not very technique about Photoshop.  I'll have to search for the answers to your other questions.  Such as the set up for the Scratch Discs, optimizing and System Maintenance?  Your assistant would still be appreciated.
    c.pfaffenbichler
    1,137 posts since
    Feb 20, 2009
    1. Dec 22, 2009 12:20 AM in response to: vejoe
    Re: could not complete your request because the result would be too big - cs3
    How are You set for RAM and Scratch Discs?
    Have You tried optimizing Your Performance-Preferences yet?
    As with all unexplainable Photoshop-problems You might try trashing the prefs (after making sure all customized settings like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences You’ve changed) by pressing command-alt-shift on starting the program and/or starting as a new User.
    Other than that System Maintenance (repairing permissions, purging PRAM, running cron-scripts, etc.) should not do any damage either.

  • When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

    Problem:
    When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
    Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
    Symptoms:
    1)   Sync:  It’s not completing the sync.  Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options.  I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
    waiting for sync to start (step 1 of 7)
    backing up (step 2 of 7)
    preparing to sync (step 3 of 7)
    determining apps to sync (step 4 of 7)
    preparing apps to sync (step 5 of 7)
    importing photos (step 6 of 7)
    waiting for changes to be applied (step 7 of 7)
    syncing apps / copying 1 of 4 (App name) (step 7 of 7)
    canceling sync
    apple icon
    2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone.  All of the albums are correct/complete in iPhoto.  All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
    3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list.  If I click on Update All, the Apps are successfully updated in iTunes.  But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
    Other Potential Pertinent Info:
    The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago).  Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed.  I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive.  Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself.  However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive.  All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
    Settings/Status:
    MacBook Air
    OSX v. 10.9
    iPhoto ’11 v. 9.5 (902.7)
    iPhone iOS 7.0.4
    iTunes v. 11.1.3 (8)
    Summary Tab
    Backups (This Computer)
    Options
    Automatically sync when this iPhone is connected
    Sync only checked songs and videos
    Photos Tab
    Sync Photos from iPhoto (429 Photos)
    Selected albums, Events, and Faces, and automatically include (no Events)
    Albums – 9 are selected

    You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

  • Error message "could not complete the video frames to layers command because dynamiclink is not avai

    So I decided to try my hand at making gifs and so I attempted to upload a video by going to file -> import -> video frames to layers. Before even letting my pick my video it comes up with an error message saying "could not complete the video frames to layers command because dynamiclink is not availible." I then tried file -> open -> and then selected the video and no matter what file type or size I chose I ended up with the same error message.
    I looked this problem up and attempted some of the solutions but to no avail. I tried clearing my preferences and restarting photoshop many times in addition to restarting my computer. I also checked to make sure it wasn't being blocked by any firewalls and it wasn't. My opperating system is Windows 7 and I'm using photoshop cs6. I've looked everywhere for an answer to this problem so if anyone is able to help me solve this problem I'd be much obliged.

    You see my C:\ drive is quite small as it's a SSD, so I made Adobe install programs on my E:\ drive too, however this was the main cause for Adobe not to function.
    After adjusting the settings to install everything back to my C:\ drive, it fixed my issue above and allowed me to run the 64bit version.

  • When opening a file in Photoshop CC I get 'Could not complete your request because of a program error.'

    I can see this is a generic error message('Could not complete your request because of a program error.') and I have done my best to read through many of the responses.
    It occurs on the second, third, or sometimes fourth file that I try to 'Open', however I can still use the 'Open With' command through Finder.
    I have tried resetting the preferences as per Julieanne Kost's recommendations, I have reinstalled Photoshop CC 2014, Generator isn't turned on, I don't have any Third-Party plug-ins loaded, I have tried running it in Safe mode, and I have reset my iMac's PRAM.
    Photoshop doesn't appear to be writing a PSErrorLog.txt file?   (~/Library/Preferences/Photoshop CC Settings/PSErrorLog.txt)
    I haven't had any other issues.
    I am running Photoshop on OS X Yosemite 10.10.2.
    Please can you help me?

    Does anyone have any other ideas as this is very frustrating.
    Thanks,
    James

  • HT1657 I have rented two movies on my laptop and they will not completely download..it shows that they are theere but when i try to watch them on my laptop or my ipad it wont open up???? help

    I have rented two movies on my laptop and they will not completely download..it shows that they are theere but when i try to watch them on my laptop or my ipad it wont open up???? help

    Welcome to the Apple community.
    A number of people have reported similar issues recently, many appear to have found a discrepancy of some kind in their account settings and making changes to these settings or simply resetting them has resolved the matter.
    Check your account details are correct, check that you are using the correct details for Location, Region and Time Zone. You may want to change these settings and then change them back to see if that helps.
    You might also try logging out of and then back into your iTunes account (Settings > iTunes Store > Apple ID’s > Sign Out) and restarting your router. (Some have reported that after doing this, they need to check for rentals even though it may report that there aren’t any, after which rentals once again appear in the ‘movies’ feature)
    Rentals should appear under their own heading in the ‘Movies’ feature, you might also check at Settings > iTunes Store > Check For Rentals.

  • How to get rid of the error message we could not complete your iTunes store request?

    How to get rid of the error message we could not complete your iTunes store request?
    having this problem when trying to authorise an newly downloaded app in iTunes

    Based on the numerous posts regarding iTunes and the App Store, there appears to be an issue at Apple's end. Although Apple has not provided any indication on the cloud status page.
    Do not change your settings.
    Edit

  • My iTunes library will not completely sync to neither my iPad nor my iPhone -- both are completely updated with the latest software. What do I have to do?? When I try to do the "autofill" option when connected to iTunes it says "no songs can be copied"

    My iTunes library will not completely sync to neither my iPad nor my iPhone -- both are completely updated with the latest software. What do I have to do?? When I try to do the "autofill" option when connected to iTunes it says "no songs can be copied"...I literally bought some of these songs yesterday on my iPhone and now I can't sync them to my iPad. What is this issue? Usually I would just have to plug either device into iTunes and everything would sync, now nothing new syncs.

    On your iPad tap Settings > Store
    Switch Books off then back on then reset your iPad.
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.

  • Could not complete the command because of a problem using the Adobe Color Engine

    Hi all
    This bizarrely started this morning - completely out of the blue - and I've no idea why.
    Setup: Mac 10.8.2 / Creative Suite Premium PhotoShop CS5 extended (patched to 12.04)
    Am working on images exported from LightRoom 4 (16bit A3 Pro Photo RGB PSDs) in PhotoShop CS5.
    As part of my image grading process I have a PhotoShop Action that does the following: copy layer to new document (document respects all of copied layer settings) > Image > Adjustments > HDR toning > apply a certain HDR preset > copy to resultant image back to original doc > set opacity as 40%.
    Totally out of the blue, after having this action for about 2 months, this morning I start getting a warning dialog of "Could not complete the command because of a problem using the Adobe Color Engine" and the action fails. The failure seems to take place at the 'make document' part of the action and seems to somehow be related to the contents of the clipboard.
    I've tried trashing and re-creating the action. It works first time out fine and then - on the next image - errors again.
    At present I can only safely carry out the work 'manually' by completing all the actions myself.
    I can think of no settings that have changed and the OS hasn't been updated in a while.
    I have found one other thread on a similar problem in PhotoShop Elements, but no definitive solution.
    Any help appreciated as I have a shedload of stuff to process.
    Best wishes
    TP

    OK: trash of prefs didn't work. Tried thrice. Re-created orig action. same problem.
    BUT!
    Your 'Image > Duplicate' suggestion does seem to work. If I use that in a new action as the method for creating the HDR version doc (instead of 'Select > Copy > New > Paste), it seems to work.
    Will try that out this afternoon, but for now: WIN!
    Many thanks for the suggestion!
    TP

  • I keep getting the follow error messages when I try to sign into iTunes store or redeem a song code: We could not complete your iTunes store request. The network connection could not be established. There was an error in the iTunes store, please try again

    I keep getting the following error messages on my Mac when I try to redeem a song code: "We could not complete your iTunes store request. The network connection could not be established. There was an error in the iTunes store, please try again later."  and then, "We could not complete your iTunes Store request. An unknown error occurred (-50)."

    Hello, constance132. 
    Thank you for visiting Apple Support Communities. 
    Here are some troubleshooting steps that I could recommend when receiving error -50. 
    "Error -50," "-5000," "8003," "8008," or "-42023"
    These alerts occur due to timeouts or conflicts trying to write a file during download.
    If you encounter this issue while accessing iTunes Store:
    See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
    If you encounter this issue while while downloading something from the iTunes Store:
    Delete your iTunes Downloads folder, located in:
    Mac OS X:
  ~/Music/iTunes/iTunes Media/Downloads   Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
    Windows Vista:
  \Users\username\Music\iTunes\iTunes Media\Downloads\
    Windows 7:
  \Users\username\My Music\iTunes\iTunes Media\Downloads\
    Windows XP:
  \Documents and Settings\username\My Documents\My Music\iTunes\iTunes Media\Downloads\
    After locating your iTunes Downloads folder:
    Quit iTunes.
    Delete the Downloads folder on your computer.
    Open iTunes.
    Choose Store > Check for Available Downloads.
    Enter your account name and password.
    If you encounter this issue while while downloading Digital Copies using Windows:
    Use MSCONFIG (directions for Windows XP and Windows Vista/Windows 7) to disable conflicting software.
    If using MSCONFIG steps resolves the issue, you may want to use the System Configuration Utility to turn on the third-party System Services and Startup Items one at a time (restarting your computer after turning on the item or items) to identify which System Service or Startup Item is causing the conflict.
    You can turn all of them back on by selecting the Normal Startup option under the General tab of the System Configuration Utility window, but please note that this may cause the issue to reoccur.
    If you are able to isolate the issue to a particular third-party software, you may wish to contact them to let them know of the conflict.
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Cheers,
    Jason H. 

Maybe you are looking for