Rt2800usb driver for TL-WN321G not working

Hello,
I have a TL-WN321G Wireless dongle that won't work on my arch (kernel 3.12.9-1).
I tried it on Ubuntu on another partition on my laptop and worked.
I tried doing `lshw` on Ubuntu and got the following for the dongle:
id: network
description: Wireless interface
physical id: 3
bus info: usb@3:3
logical name: wlan62
serial: 74:ea:3a:8c:56:0e
capabilities: ethernet physical wireless
configuration:
broadcast = yes
driver = rt2800usb
driverversion = 3.5.0-28-generic
firmware = 0.29
ip = 192.168.1.71
link = yes
multicast = yes
wireless = IEEE 802.11bg
`lsmod` on Arch produces:
Module Size Used by
rndis_host 7770 0
cdc_ether 7380 1 rndis_host
usbnet 26842 2 rndis_host,cdc_ether
mii 4035 1 usbnet
usb_storage 48007 0
arc4 2008 4
nvidia 10621511 27
x86_pkg_temp_thermal 6999 0
intel_powerclamp 8642 0
joydev 9671 0
coretemp 6334 0
brcmsmac 512967 0
kvm 388581 0
cordic 1120 1 brcmsmac
brcmutil 4581 1 brcmsmac
crct10dif_pclmul 4754 0
crct10dif_common 1380 1 crct10dif_pclmul
crc32_pclmul 3027 0
b43 364869 0
crc32c_intel 14257 0
ghash_clmulni_intel 4509 0
rt2800usb 20261 0
aesni_intel 46132 0
uvcvideo 72836 0
aes_x86_64 7407 1 aesni_intel
ssb 55507 1 b43
lrw 3573 1 aesni_intel
rt2x00usb 9162 1 rt2800usb
gf128mul 5866 1 lrw
mmc_core 95691 2 b43,ssb
rt2800lib 74627 1 rt2800usb
rt2x00lib 37775 3 rt2x00usb,rt2800lib,rt2800usb
videobuf2_vmalloc 3280 1 uvcvideo
videobuf2_memops 2343 1 videobuf2_vmalloc
videobuf2_core 27963 1 uvcvideo
snd_hda_codec_hdmi 30162 1
iTCO_wdt 5407 0
alx 25231 0
videodev 111332 2 uvcvideo,videobuf2_core
glue_helper 4617 1 aesni_intel
pcmcia 45396 2 b43,ssb
media 11751 2 uvcvideo,videodev
mac80211 468058 5 b43,brcmsmac,rt2x00lib,rt2x00usb,rt2800lib
ablk_helper 1980 1 aesni_intel
cryptd 8481 3 ghash_clmulni_intel,aesni_intel,ablk_helper
pcmcia_core 14264 1 pcmcia
rts5139 332075 0
i915 657857 2
cfg80211 412662 4 b43,brcmsmac,mac80211,rt2x00lib
crc_ccitt 1371 1 rt2800lib
iTCO_vendor_support 1937 1 iTCO_wdt
evdev 11085 17
psmouse 85460 0
bcma 36200 3 b43,brcmsmac
snd_hda_codec_conexant 36759 1
intel_agp 10880 1 i915
mdio 3533 1 alx
serio_raw 5049 0
snd_hda_intel 37000 4
intel_gtt 12664 2 i915,intel_agp
microcode 15216 0
ideapad_laptop 9969 0
drm_kms_helper 36254 1 i915
sparse_keymap 3154 1 ideapad_laptop
snd_hda_codec 150305 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel
drm 238270 5 i915,drm_kms_helper,nvidia
snd_hwdep 6340 1 snd_hda_codec
snd_pcm 77645 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
rfkill 15651 2 cfg80211,ideapad_laptop
i2c_algo_bit 5399 1 i915
ac 3332 0
thermal 8532 0
battery 7573 0
processor 24903 0
snd_page_alloc 7242 2 snd_pcm,snd_hda_intel
button 4677 1 i915
video 11196 1 i915
lpc_ich 13376 0
snd_timer 18726 2 snd_pcm
i2c_i801 11277 0
i2c_core 24632 7 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,nvidia,videodev
mei_me 9400 0
mei 62286 1 mei_me
shpchp 25465 0
snd 59109 13 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5450 1 snd
ext4 474699 2
crc16 1367 1 ext4
mbcache 6082 1 ext4
jbd2 83440 1 ext4
hid_generic 1161 0
usbhid 40577 0
hid 90742 2 hid_generic,usbhid
sr_mod 14898 0
cdrom 34848 1 sr_mod
sd_mod 30821 3
ahci 23088 2
libahci 21642 1 ahci
libata 171112 2 ahci,libahci
scsi_mod 130669 5 rts5139,usb_storage,libata,sd_mod,sr_mod
ehci_pci 4000 0
ehci_hcd 59252 1 ehci_pci
xhci_hcd 145281 0
usbcore 180104 12 uvcvideo,rndis_host,rts5139,rt2x00usb,usb_storage,rt2800usb,ehci_hcd,ehci_pci,usbhid,usbnet,xhci_hcd,cdc_ether
usb_common 1656 1 usbcore
Since rt2800 is in the driver list, shouldn't the dongle just work?
`rfkill list` produces for the dongle
6: phy4: Wireless LAN
Soft blocked: yes
Hard blocked: no

tomk wrote:Ehmm.. unblock it.
I tried `rfkill unblock 6`, it was unblocked but if I run `ifconfig` I don't get an interface for the dongle.

Similar Messages

  • Ethernet driver for WXP is not working on Satellite A100

    Satellite A100-784 PSAANE-02L011G3 ethernet driver for wxp is not working. Can not properly install driver, downloaded all possible drivers and still not working.
    In device manager yellow sign. I have bought my laptop with Vista BASIC and I put XP-SP2. Country is Croatia! Help me please!

    Hi
    I cannot believe that you are not able to install the LAN driver on this A100 Satellite!
    However, the Sat A100-784 supports an Intel 82562GZ 10/100 Mbit (Ekron) Lan chip.
    If you want you can download and install the Lan driver from the Intel page:
    http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=999&lang=eng
    There you will find the drivers for the Intel 8256x Ethernet Controllers
    Bye

  • Driver for OfficeJet J4580 Not Working with Windows 7 Profession​al

    I am trying to install the driver on a new Toshiba laptop but the driver keeps failing.  I have tried the Basic and Comprehensive drivers.  After downloading, I get a prompt to extract the driver, then I get an error message that says the file is corrupt, cannot extract. I get the same error message with both drivers.   I am downloading the drivers from the HP website. I am using Windows 7 Professional 64-bit.  I do not have the printer plugged in (it's plugged into my very old Windows XP laptop and works fine there).   I have left e-mail messages to Support through the HP site and have not gotten an answer.  Is this printer just too old for my new computer?  Do many of the HP printers have problems with Windows 7?  Any assistance is appreciated.  Thank you!

    Hi @OrdinaryHPUser,
    Welcome to the HP Forums!
    I noticed that you cannot install the driver for your HP Officejet J4580 on Windows 7. I am happy to help!
    Full feature software and drivers, are available for this printer on Windows 7. So the printer is compatible. I would recommend to try the following steps:
    Uninstall the software. Uninstalling the Printer Software. (Only if the software is partially installed, otherwise you can skip this step.)
    Clean boot the computer. How to perform a clean boot in Windows.
    Disable any Antivirus programs. Disable Antivirus software.
    Disable any firewall programs. Turn Windows Firewall on or off.
    Create a new user account. Managing User Accounts and Logins (Windows 7).
    Reinstall using the HP Printer Install Wizard for Windows.
    Hope this will solve the issue, and have a good day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Keithley 2400 driver for Labview 8 not working

    I searched the boards and found this driver for a Keithley 2400 that should run with Labview 8.  I have Labview 8.6.
    http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=25B255F3AA83660EE0440003BA7CCD...
    I put the driver folder in the proper location and the vi's are appearing in the selection menu as expected.  I have my Keithley 2400 connected to a serial port on COM1.  When I simply try to run the initialization VI it doesn't work.  I know it's communicating in some form, because my Keithley goes into remote mode and the initialization driver is able to properly read what the model of the Keithley is.  When it gets to the VISA read vi it is timing out, but still outputs the correct model identification.  I don't understand why it's timing out and not working.  
    Is there something else I should've installed?  The driver readme says the only additional software required is NI-VISA 3.2, however I have version 4.4, so I should be fine.  I just don't understand why it's "sort of" working.  Any help would be greatly appreciated. 
    Solved!
    Go to Solution.

    It doesn't sound like it. You are using serial and that requires nothing beyond VISA - plus simple commands are working. The fact that the drivers can send and receive the SCPI identification command tells me that you are communicating with the instrument. (That is what causes the instrument to tell you what kind of device it is.) The thing to remember about drivers you get from vendors is that they can be very buggy. Often times they were written by someone who doesn't know LV very well, or were perhaps donated to them by one of their customers. I always view vendor-supplied drivers as simply a starting place for creating really usable ones.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Window 8 TouchPad Driver for U300e is Not Working...

    Hi,
    I have installed the Window 8 Drivers for Idea Pad U300e. After installed Touch Pad Driver, The Touch Pad is not working anymore. To use mouse, I have to plug in external mouse and have to uninstall the Touch Pad Driver. After removed it, It working fine again. It is working fine but why i want to upgrade the touch pad driver from lenovo is there got plum sensitivity and disabled the track pad using the function key. Any Expret suggestion on how can i do the driver to work fine??
    Best Regards,
    Mahar.

    Hi
    I cannot believe that you are not able to install the LAN driver on this A100 Satellite!
    However, the Sat A100-784 supports an Intel 82562GZ 10/100 Mbit (Ekron) Lan chip.
    If you want you can download and install the Lan driver from the Intel page:
    http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=999&lang=eng
    There you will find the drivers for the Intel 8256x Ethernet Controllers
    Bye

  • Latest I-tunes download AMD USB Driver for xp will not work therefore cannot sinc ipad

    I have downloaded latest I-tunes version 10 and am experiencing problem with the Apple mobile device USB driver not working correctly.
    I have tried deleting all apple software and re-installing again - without success!
    I am trying to Sync primarily an I-pad2  but also an older Ipod classic
    I am operating on XP Pro with SP3.
    Can anyone help please?

    Welcome, and thank you for a thorough input! Hope I don't miss something you already said!
    Quick version: Try setting processor voltage to 1,5 volt.
    Long version:
    Posting at wrong FSB can be put down to two things:
    1 The processor isn't what you thought it is, but I think you eliminated that.
    2 The system cannot run the processor at the correct speed. Mainly this has to with overheating, and/or that memory and processor cannot cooperate. This must be it, as you noticed the processor is correctly recognised.
    You have little connected right? Then the best thing would be to pull power cable out. Take the motherboard and redo the seating of the processor, this is much better done with motherboard taken out.
    At the same time, I suggest you clear CMOS. Should always be done when changing processor, and I've noticed on the Internet there are a few 1,5V XP2800 around.
    http://64.233.183.104/search?q=cache:Q4eIa6OhudcJ:forums.amd.com/lofiversion/index.php/t47487.html+AXDL2800DLV4D+problem&hl=sv&gl=se&ct=clnk&cd=1

  • Need proper driver for cd/dvd not working

    TOSHIBA SATELITE M45-S269  
    I saw a few different drivers in the download section related to sound/dvd but not sure which one is right. The two that I tried downloading were zip files full of hundreds of different files?
    I'm just looking for the right driver to reinstall to fix this yellow exclamation error next to my driver in device manager.
    Cant play music or game cd's properly anymore
    Thanks for any help

    Satellite M45-S269
    The optical drive is supported natively in Windows XP.
    Double-click it in Device Manager and tell us what Device status has. It's on the General tab of the Properties box.
    -Jerry

  • I cannot seem to load raw images into LR 2.5.  I've been using this for years.  I always load from memory card, but it gives me an unknown error message.  I tried to load from camera, hard drive, & external drive and still will not work.  I checked import

    I cannot seem to load raw images into LR 2.5.  I've been using this for years.  I always load from memory card, but it gives me an unknown error message.  I tried to load from camera, hard drive, & external drive and still will not work.  I checked import menu and nothing has changed.  I loaded the photos onto my tablet and images are fine, so do not feel it is the memory card.  Any thoughts?

    The error message probably said "unsupported or damaged"
    The T3 requires Lightroom 3.4.1 or later. You can either upgrade to a more current version of Lightroom (version 5.6 is the most recent) or you can use the free Adobe DNG Converter to convert the RAWs to DNG, which should import into Lightroom properly.

  • Integrated WebCam for Thinkpad X1 not working.

    Hi guys, I have a new X1 thinkpad... initially the webcam was working but now I could not seems to get it work. I also could not see this in the device list. Tried re-installing the driver but it does not work. Anyone knows how to fix this issue?

    Hey there jerry_bp,
    I have to agree, it sounds like you are having a hardware issue. In this instance it is most likely the connection for the camera is loose and you will need to contact service to have the issue resolved. The number for the US Service Center is 1-800-426-7378, before calling make sure you have your Machine Type, Model Number, and Serial Number.(Found On the Lenovo Sticker on the underside of machine) Good Luck, and keep us posted of your progress.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

  • F4 help for 0MAT_SALES is not working in BI 7

    Hi Gurus,
    The F4 help for 0MAT_SALES is not working when distibution channel is selected as (!=02) in Bex Analyzer. But for all other values for distibution channel  i am getting values in F4 help.
    Since 02 is excluded it is supposed to give values for all other combination. but it not so.
    Could anyone of you please help me on this?
    Thanks in advance.

    Closing Thread

  • Short key for copy does not work all the time now.

    After I have installed the latest OSX - Yosemite, my short key for copy does not work all the time.  It is infrequent how it works. I'm using the same keyboard that I have always used, my wireless logitech keyboard for mac.  Please help.

    I've plugged in my default mac keyboard and the short key copy still does not work.

  • I have an iMac with OS Lion. The Smartart feature for Office for Mac will not work when I am logged on to my personal user account. It works with other user accounts on the same computer, and it works after "safe start". How can I fix the problem?

    The Smartart feature of Office for Mac will not work in my user account. It works for all other user accounts on the same computer, and it works after a "safe start". How can I fix the problem?

    You may also want to search/ask in the forums run by the people who make the product which is causing you problems:
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011

  • The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I'm very computer literate and am pretty sure the problem is on your end.

    The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I've tried it multiple times and continue to get the same message: "NOT FOUND The requested item could not be found". I also tried through the Market application on the phone but ended-up with the same result.
    I'm very computer literate and am pretty sure the problem is on your end. If this is the case then no one can download the app. I considered that perhaps because it's still in Beta that it was removed due to some other type of software issue. I would really like to use Firefox on my new Droid (2.0); when with this be available?

    Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
    https://wiki.mozilla.org/Mobile/Platforms/Android
    Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
    Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
    (Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)

  • I purchased PSE 13 but have a Vista OS. It was suggested in this chat room that I download PSE 12. I did that & installed. The serial # for 13 does not work. Any thoughts on how I can get a number for PSE 12?

    I purchased PSE 13 but have a Vista OS. It was suggested in this chat room that I download PSE 12. I did that & installed 12.
    The serial # for 13 does not work. Any thoughts on how I can get a serial number for PSE 12?

    Hi
    There is a newer version of Resolution+ Plug-in released for an Qosmio X series
    [Resolution+ Plug-in v 1.1.2004|http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=381&selSeries=231&selProduct=7506&sel ShortMod=null&language=13&selOS=all&selType=400&ye arupload=&monthupload=&dayupload=&useDate=null&mod e=allMachines&search=&action=search&macId=&country =all&selectedLanguage=13&type=400&page=1&ID=82406& OSID=30&driverLanguage=42]
    try it out...
    If it has not been installed properly, try rebooting your computer and reverify.

  • My itnues for pc is not working :( it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me

    my itnues for pc is not working it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me

    Please helppppp

Maybe you are looking for