RT3290 Latest Driver Update

Dear HP,
after all these months releasing a BIOS update is pretty nice move except not giving the user any control over Dual-Graphs. You know that was the only thing, since the BSD times, average user wanted a specific BIOS or Kernel change. Again, nice move.
To get to my point, while you are updating the **bleep** out of my computer, which freezed it in parts of half minutes for half an hour, the miracle RT3290 driver update of yours seemed to be in no way close to be working.
I tried to switch on the Network Boot option in BIOS, since you upgraded that too, with no luck.
However, I changed it to previous version, which if I give a proper **bleep**, was 5.0.0.0 or 5.0.0.9 something. I'm sure you know what I'm talking about.
Well, since I've written this in a format which subjected the HP Inc. directly and while you surveilling the crep out of us in a way, which I'm sure what the BIOS updates was for, showed some dissappointment of your failures in servicing, so  excusez ma française.
I may sincerely be glad if I'm pointed on when the working driver update will be available.

Dear HP
 I want driver for hp RT3290 (All) only.

Similar Messages

  • I am running windows 7 64bit, have a brother printer MFC-J4510W with the latest driver update, have Adobe reader 11.0.10.32 and as of today I cannot print any pdf files that before I could, all help appreciated

    I am running windows 7 64bit, have a brother printer MFC-J4510W with the latest driver update, have Adobe reader 11.0.10.32 and as of today I cannot print any pdf files that before I could, all help appreciated
    I followed the FAQ troubleshooting and that didn't help

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • Has anyone had problems with the latest driver update for the Lexmark printers? My Lexmark printers won't work with the latest driver update.

    Has anyone had problems with the latest Lexmark printer driver update? My Lexmark printers won't work with the latest driver update. If I reinstall an older version of the drivers, they work.

    Mine crashed once with new update, but working fine.
    I had to delete old printer, restart iMac, and then reinstall
    new drivers to get it to work. Would not complete without
    the restart after deleting non-working printer. No problems
    since and all features working.

  • ATI Radeon (TM) HD 6470M latest driver update.

    are there new updates in ATI Radeon (TM) HD 6470M graphic driver?

    Roshan_wirantha wrote:
    are there new updates in ATI Radeon (TM) HD 6470M graphic driver?

  • Re: Nahimic latest driver update

    My subwoofer is not working after installing this beta update. My notebook is GS70 2qe -054.

    Quote from: msiTechNB on 29-May-15, 10:51:45Hi everyone,
    Thanks for your test and information.  We are studying the problem root cause.
    If your model is GT72, GE60 2Qx/2Px or GS60 2Qx, and encounter any problem, you...

  • X-FI Lost all Sound after latest driver update, install orginal cd still no so

    My sound was working with minor sound problems in Frontlines and Crysis. I installed your new drivers and I lost all my sound. Going to playback mode the system shows it getting sound, its just not coming out of my speakers. I've uninstalled your drivers and and tried going back to the ones that came with the sound card. It worked for about 5 mins and then everything stoped again. Installing and reinstalling isn't doing a thing and I'm out of ideas and have spent 5 hours searching for a fix.
    Yes everything is upto date on my computer, all drivers etc, yes my speakers are connected and turned on. I've disabled the onboard sound to avoid a conflict. I've disabled the option for apps to control the sound. Nothing is overclocked
    I dont know why in the hell I bought a pc with vista, but this is where I stand now.
    Please help.
    System specs:
    Asus P5E3 Deluxe?
    Qx 9650
    4 Gig of DDR 3 Crosair XMS3
    X-FI? Xtreme Gamer Fatalty Pro 24 bit

    Look in control panel, in audio settings, advanced and into volumes of separate speakers.
    btw those new drivers 2.5 are one big missundestanding, delete them quickly and wait till creative will fix that trash.

  • Since updating an iphone5 to ios8.3, it is no longer recognized by my pc. An Apple tech suggested that I install itunes as the only way to assure that I have the latest driver. Any way to do this without installing itunes?

    Since updating an iphone 5 to ios 8.3, it is no longer recognized by my Windows 7 pc. An Apple tech suggested that I install itunes as the only way to assure that I have the latest driver. Any way to do this without installing itunes?

    Read this
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • Installed latest itunes update and computer tried to burn a playlist to CD and realized computer no longer recognizes my CD/DVD drive. This is an APPLE Itunes issue. Help!. HPPavillion DV6 64 bit, windows 7

    Installed latest itunes update and computer tried to burn a playlist to CD and realized computer no longer recognizes my CD/DVD drive. After doing some data mining, found out from community this is an long standing APPLE problem- which doesn't get much tech support in terms of fixes. I have an HPPavillion DV6 64 bit, Windows 7 OS . After reading an earlier complaint from 2009 in the support community,  I ran diagnostics from ITunes which gave the following result. Can someone please help? (I'm not enough of a techie to know what I'm doing or how to locate /reinstall CD drivers. I am searching for driver disc but cannot locate.)
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    Hewlett-Packard HP Pavilion dv6 Notebook PC
    iTunes 10.6.3.25
    QuickTime 7.7.2
    FairPlay 1.14.43
    Apple Application Support 2.1.9
    iPod Updater Library 10.0d2
    VoiceOver Kit 1.4.2 (222093/222742)
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.2.0.6
    Apple Mobile Device Driver 1.59.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0043AC7C0368E428
    Current user is not an administrator.
    The current local date and time is 2012-07-24 23:43:08.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    ATI Technologies Inc., AMD M880G with ATI Mobility Radeon HD 4250
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 10.6.3.25 (x64) is currently running.
    iTunesHelper 10.6.3.25 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.

    Doublechecking ... did you have CD/DVD drive tests checked when you ran those diagnostics? (I'm not seeing the CD/DVD test results down the bottom of the results where I'd expect to see them.)
    For example, here's what I get:
    Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
    Acer Aspire X3400
    iTunes 10.6.3.25
    QuickTime 7.7.2
    FairPlay 1.14.43
    Apple Application Support 2.1.9
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.2.0.6
    Apple Mobile Device Driver 1.59.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 003CAD7C0A1258F8
    Current user is not an administrator.
    The current local date and time is 2012-07-26 10:42:53.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is disabled.
    HDCP is supported.
    Core Media is not supported. (16008)
    Video Display Information
    ATI Technologies Inc., AMD Radeon HD 6570
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: d6a87ba725121aa1240b1ce936c23470
    iPodService 10.6.3.25 (x64) is currently running.
    iTunesHelper 10.6.3.25 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.0.1),
    E: ATAPI DVD A  DH16ABSH, Rev YA12
    Data or MP3 CD in drive.
    Found 1 songs on CD, playing time 255:57 on CDROM media.
    Track 1, start time 00:02:00
    Get drive speed succeeded.
    The drive CDR speeds are:   4.
    The drive CDRW speeds are:   4.

  • Latest security update and the disappearance of my external drive

    I'm sure you're going to tell me that one has nothing to do with the other, but after running the latest security update, the Iomega MiniMax external drive that's been connected to my TiBook for the last 3 years has all of a sudden disappeared from my desktop.
    System profiler sees it, Disk Utilities sees it. But there are a couple of things bugging me:
    - I'd never paid attention before, but both the System profiler and DU indicated that SMART is not supported
    - When I ran DU (off the OSX install disk) to try to repair the HD, I got the following message:
    +Invalid node structre+
    +Volume check failed+
    (these 2 lines in red type)
    +Error: The underlying task reported failure on exit+
    (this in bold, red type)
    +1 HFS volume checked+
    +1 volume could not be repaired because of an error+
    I think that was in red, too, but can't swear to it, as I'm totally rattled by now.
    Now, there is no system on the Iomega, nothing but precious photos and music (since the original HD on this TiBook could only hold 30 Gb), and I'm at a loss as to why all of a sudden I can't access it. Whenever I've come back from a trip, I just plug the external back in (via firewire and usb), and it would just show up, as if nothing had happened.
    Any ideas, any help would be, as usual, most appreciated.
    Thank you all.
    Message was edited by: DesigningWoman

    DesigningWoman wrote:
    I realize I'm getting 'way off this thread, but wanted to post back. I brought the Iomega to work, plugged it into my iMac and… nothing. Running DU gave me the same results as posted above. Then, for want of a better idea, I pulled out the install disk for the iMac, started up off that and ran DU.
    Guess what? It went through its verifications, came up with problems and then proceeded to repair the external. And that wonderful little orange icon was there on my desktop at startup!
    There shouldn't be any difference; my guess is it just happened to pick that time to mount. Sometimes a HD with issues will not mount 10+ times in a row, then, for whatever reason, it does on the eleventh try.
    There's a new folder in the Iomega now, called "lost+found", weighing in at a little over a Mb and full of files ending with ".nib". Any idea what those are and if I need to keep them?
    Hmmm, Google search turns up this from wiki:
    Interface Builder is a software development application for Apple's Mac OS X operating system. It is part of Xcode (formerly Project Builder), the Apple Developer Connection developer's toolset. Interface Builder allows Cocoa and Carbon developers to create interfaces for applications using a graphical user interface. The resulting interface is stored as a .nib file, short for NeXT Interface Builder, or more recently, as a .xib file.
    Do you use Xcode?
    Another hit mentions iPhone, and another Corel. Don't know what to make of it in your case. Can you open any of the files? Any have same name as your data? Creation dates?
    I shall now proceed to back up before reformatting.
    Good plan.
    And check out the cost of a replacement here (they're a good bit higher than in the States.
    Ask yourself what your data is worth, and after it's gone, what you would have spent to have retained it. My guess is the answer would be a lot more than the cost of a HD.
    Do I want a SATA?
    Nope, TiBook doesn't have that interface.
    I liked this model because it also worked as a hub… There are so many flavors out there now!
    Indeed.
    er, ahem, that's a sheepish "yes".
    'Nuff said.
    A while back, thanks to you and other forum members, I'd gathered up the courage to swap out the original HD for the biggest one the PB could take, and had always meant to to a "backward" backup of the stuff that was on the external — or copying photos onto CDs. Needless to say, the task got put off until this scare. Won't be doing that again.
    I considered myself "lucky" the first time I lost data, as it wasn't too, too important, but it taught me a lesson I've never forgotten.
    So, once again, thanks for the hand-holding (you had also talked me through/encouraged me to deal with the tight hinges on the TiBook).
    You're welcome. Together with RAM and HD, that was the best thing I ever did for my TiBook.
    Love this forum!
    We aims to please!

  • Update retriever not always latest driver

    I have noticed lately that Update Retriever is not pulling the latest driver from the Lenovo website.
    I specifically noticed this with the query 3437/win8 updates. It doesn't pull the RealTek High Definition Audio Driver version 6.0.1.7040.  Is there a delay or should it pull the latest available as soon as it is available on the support website?
    Solved!
    Go to Solution.

    There is a delay.  Content available through Update Retriever is the same content available through System Update.  There is additional work that has to be done to create a package descriptor so System Update or ThinInstaller know how to install the update and detect when it is applicable.  Then various scenarios have to be tested across various supported devices.  Usually there is at least 2 weeks delay.  We sometimes find issues with installing the update using System Update or Thin Installer and the delay is longer.

  • After latest OS update, My External drive doesn't work

    Hi everyone,
    I purchased an Arcdisk 4gb usb drive (http://www.archos.com/products/storage/arcdisk4/index.html?country=global&lang=e n). It was working fine on both my PC and Mac until last week. Last week, after i installed the latest software updates from Apple, my mac no longer picks up the arcdisk. However the arcdisk still works fine on my PC. I emailed Archos and their responce was that Apple should have some solution to my problem ~sigh~.
    I'd appreciate any suggestions! Otherwise I'm feeling really stupid for having spent $150 on the thing.
    Thanks in advance,
    Terry

    terry
    Welcome to discussions. Does Disk Utility (inside /Applications/Utilities) "see" the drive?

  • External drive and ipod won't mount after latest security update

    I just downloaded the latest security update on my powerbook, and now my lacee external hard-drive won't mount. I ran disc permissions and still nothing. My ipod charges from the firewire port but doesn't mount either. The hard-drive mounts fine on my dome imac which appears to have the latest updates as well. Could it be a problem with the firewire port itself or something to do with the security update? Thanks for the help.

    Your PowerBook is hurting my friend. Check "About this Mac" and see if the memory reported is the actual memory you have installed on the machine. I had a PB that had 1GB installed but the machine only read 256. Ended up needing a logic board replacement. Check http://docs.info.apple.com/article.html?artnum=303173 to see if it applies to you.
    Unplug all devices from the PB, leaving only power connected.
    If it everything seems cool, then you'll want to start up in "single user mode". Restart the PB and hold down the  + s (apple and s) keys until you get a black display with white characters. Once you get the command prompt signified by a # character. At that point type in the following at the prompt
    fsck -yf
    then hit your return key
    As the system check your HD, notice any errors that are displayed. After it is done it will inform you of any modifications, or if it thinks everything is cool.
    then again, type in
    fsck -yf
    then hit your return key
    You'll want to have run the fsck -yf utility a total of 3 times. Hopefully at the end everything will be good (No errors) "* appears to be OK".
    In any case, type in
    reboot -n
    then hit your return key
    Your PB will reboot. After the OS has loaded, plug in your FW devices and see if they mount. Either way post back with results.
    d

  • Cant Install the latest 2 Driver Updates for Audig

    Hello,
    I cant install the latest drivers:
    .Creative Sound Blaster Audigy unified series Beta driver with OpenAL support 2.08.0002
    2.Creative Sound Blaster Audigy2 and Audigy2 ZS Driver Update .84.55
    Setup is giving me error: "Setup Couldn't detect any Sound Blaster Audigy 2 on your system"
    all other drivers previously to that are installed. (also installed EAX4 web update).
    specs:
    Audigy 2
    Windows XP
    024Ram
    AMD 64bit
    please advice what to do. thank you

    alright, it seems to have worked.
    thanx a bunch

  • I installed the latest security update now my Lacie external drive won't show up in finder. Any Help?

    I installed the latest security update now my Lacie external drive won't show up in finder. Any Help?

    Does it show up in Disk Utility?
    See mount section in 1st linked article.
    Disk Unmount Using Terminal
    Disk Utility – Force Mount Disk

  • HP Envy I7 15" Notebook PC- Latest Intel Update for HD Graphics Adapter driver fails to install

    My PC tried to install the driver update today, and both attempts failed after the installation. There are no diagnostic messages, only the X on the last step to indicate a failure. The HP support assistant continues to show the driver in need of updating. Any ideas how to fix the driver update issue? Thank you in advance.
    PC Identification information: Windows 8.1, Product Number C8P48AV
    What tries to update: SoftPaq SP630750, Version 10.18.10.3304
    This question was solved.
    View Solution.

    Hi Vdolcourt,
    Yes, I would recommend doing that. But make sure you uninstall the driver first.Here is the download from HP.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Maybe you are looking for